Triazoles

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 423165-07-5

General procedure: To an aqueous solution of active hydrogen containing amide, few drops of aqueous ammonia solution (1 eq.) and secondary amine (1 eq.) were added in drops in an ice-cold solution under constant stirring for dissolution. Aromatic aldehydes dissolved in methanol, added dropwise to the above mixture and stirring was continued for 2 h. The formation of compounds were observed within 30 min. Reaction was monitored by TLC, after completion of reaction, the product was filtered and washed with distilled water and dried at 45-50 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 423165-07-5.

Reference:
Article; Viveka, T. Lakshmi; Sharada, L. Nalanda; Asian Journal of Chemistry; vol. 30; 9; (2018); p. 2029 – 2034;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1001401-62-2,Some common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 4: (2-(2H-l,2,3-Triazol-2-yl)phenyl)((2i?,5i?)-5-hydroxy-2-methylpiperidin-l-yl)methanone (9) A solution of (3R, 6i?)-6-methylpiperidin-3-ol (5.31 g, 46.1 mmol), 2-(2H- 1 ,2,3- triazol-2-yl)benzoic acid (10.5 g, 55.3 mmol), EDC (17.7 g, 92.0 mmol), l-hydroxy-7- azabenzotriazole (12.6 g, 92.0 mmol), and triethylamine (19.3 mL, 138 mmol) in DMF (300 mL) was stirred at 50 C overnight, then diluted with saturated aqueous sodium bicarbonate and extracted 3x with ethyl acetate. The organics were washed with brine, dried over magnesium sulfate, filtered, and concentrated in vacuo. The crude material was purified by silica gel gradient chromatography (0-100% ethyl acetate in hexanes), providing the title compound as a pale yellow solid. LRMS m/z (Mu+Eta) 287.3 found, 287.1 required.

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel, J.; SKUDLAREK, Jason, W.; WO2014/176142; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of Zn(NO3)2.6H2O (30.0 mg, 0.1 mmol), 3-amino-1,2,4-triazole (8.4 mg, 0.1 mmol), H2bdc (8.3 mg, 0.05 mmol) and HNO3 (0.08 mL) in a mixed solvents of DMA (1.5 mL), MeOH(1.5 mL) and H2O (3 mL) was placed in a glass vial (23 mL) and heated at 100 C for 3 days. Colorless polyhedral crystals were obtained and washed with MeOH (yield: 75% based on ligand).Anal. Calc. (Found) for C12H11Zn2N8O4.5: C, 30.66 (30.62); H, 2.36(2.26); N, 23.84 (23.82)%. Selected IR data (KBr, cm-1): 3413,3337, 3231, 1633, 1588, 1541, 1390, 1404, 1290, 1227, 1067,1013, 885, 830, 746, 583.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Liu, Jie; Wei, Yuhui; Bao, Fenlin; Li, Guixiang; Liu, Huiyan; Wang, Haiying; Polyhedron; vol. 169; (2019); p. 58 – 65;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5,Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16681-65-5 as follows. name: 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (200 mg, 2.41 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (20 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 1.0 mL, 2.5 mmol) was added drop wise which afforded a dark reddish-brown viscous solution. The mixture was stirred at -30 C. for 35 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,4-dimethyloxazol-5-yl)methanone (500 mg, 1.05 mmol, in 4 mL THF, Intermediate 51: step b) was introduced at -20 C. The reaction mixture became a dark brown color and was then placed in an ice-water bath and allowed to warm gradually to room temperature. After 45 minutes, the mixture was quenched with aqueous NH4Cl solution and extracted with EtOAc:THF (10:2), 4*50 mL. The combined organics were washed with brine, dried over Na2SO4, filtered and concentrated to provide a brown oil. Chromatography on silica gel (3% MeOH-DCM increasing to 5% MeOH-DCM) to provide the title compound as a faint amber solid. MS m/e 558.2 [M+H]+. 1H NMR (400 MHz, CDCl3) delta ppm 8.15 (d, J=2.0 Hz, 1H), 7.86 (d, J=8.8 Hz, 1H), 7.54-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.14 (s, 1H), 4.35 (s, 2H), 4.10 (s, 3H), 4.03 (s, 1H), 3.92 (s, 3H), 2.40 (s, 3H), 1.54 (s, 3H).

According to the analysis of related databases, 16681-65-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 1H-1,2,3-Triazole

Compound 8 was prepared by adapting a procedure described. 13 A degased solution of Pd2(dba)3 (20 mg, 90 mumol) and 2-di-tert-butylphosphino-3,4,5,6-tetramethyl-2′,4′,6′-triisopropyl-1,1′-biphenyl (104 mg, 0.22 mmol) in toluene (6 mL) was heated at 120 C for 5 min and transferred to a degased mixture of K3PO4 (5.1 g, 24 mmol), 1,2,3-triazole (0.83 mL, 14 mmol) and 1-bromo-4-(trifluoromethoxy)benzene (1.8 mL, 12 mmol) in toluene (6 mL). The resulting mixture was heated under argon at 120 C for 24 h. CH2Cl2 (30 mL) was added, the organic phase was washed with NH4Cl-saturated water (10 mL) and brine (10 mL), and the solvent was evaporated. The crude product was purified by chromatography over silica gel (eluent: heptane/AcOEt 95:5) to afford the pure compound in 96% yield as a beige powder: mp <50 C; IR (ATR): 1606, 1511, 1411, 1386, 1251, 1207, 1193, 1152, 1100, 1084, 1056, 962, 949, 921, 852, 821, 731, 664 cm-1; 1H NMR (CDCl3, 300 MHz) 7.32-7.36 (m, 2H), 7.82 (s, 2H), 8.11-8.15 (m, 2H); 13C NMR (CDCl3, 75 MHz) 120.4 (2CH), 120.6 (q, C, J = 256 Hz), 122.0 (2CH), 136.0 (2CH), 138.4 (C), 148.3 (C); 19F NMR (CDCl3, 282 MHz) -58.0. The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings. Reference:
Article; Nagaradja, Elisabeth; Bentabed-Ababsa, Ghenia; Scalabrini, Mathieu; Chevallier, Floris; Philippot, Stephanie; Fontanay, Stephane; Duval, Raphael E.; Halauko, Yury S.; Ivashkevich, Oleg A.; Matulis, Vadim E.; Roisnel, Thierry; Mongin, Florence; Bioorganic and Medicinal Chemistry; vol. 23; 19; (2015); p. 6355 – 6363;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1001401-62-2,Some common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[( ?)-3-(3-lodo-benzyl)-morpholin-4-yl]-(2-[1 ,2,3]triazol-2-yl-phenyl)-methanone (B-28)A solution of (R)-3-(3-iodo-benzyl)-morpholine B-5 (100 mg, 0.33 mmol) and DIPEA (57 muIota_, 0.33 mmol) in DMF (1.5 mL) was added to a RT solution of 2-(2H-1 ,2,3-triazol-2-yl)benzoic acid E-2 (62 mg, 0.33 mmol), TBTU (1 1 1 mg, 0.35 mmol) and DIPEA (57 muIota_, 0.33 mmol) in DMF (1.5 ml) under argon and the resulting mixture was stirred for 22h. The reaction mixture was quenched with sat. aq. NaHC03 and stirred for 10 min before being diluted with water and extracted with DCM (3x). The combined organic extracts were washed with 2M aq . NaOH (1x), 2M aq. HCI (1 x) and brine (1x), dried over Na2S04, filtered and evaporated in vacuo. The crude product was purified by prep. HPLC (method F) to give the title compound as a white solid. LC-MS D: tR = 0.93 min; [M+H]+ = 474.91 .

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOLLI, Martin; BOSS, Christoph; BROTSCHI, Christine; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2013/68935; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 74205-82-6,Some common heterocyclic compound, 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

The synthetic route of 74205-82-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 1, 2, 3-triazole (3.45g, 50mmol), 2-iodo-5-methyl benzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘-dimethyl -1 , 2-cyclohexanediamine (0.51g, 3. 6mmol), cuprous iodide (0.38g, 2mmol) and N, N-dimethyl formamide (30 ml) are sequentially added to the 100 ml round bottom flask in a single port, the resulting reaction mixture under the protection of nitrogen is gradually heated up to 100 C, reaction 4 hours. Stop the reaction, cooling to room temperature to be reacted, water (150 ml) is diluted, and using ethyl acetate (200 ml ¡Á 2) extraction . Remove organic layer, the aqueous layer with concentrated hydrochloric acid (the mass fraction is 36.5%) acidified to pH to 1-2, then using ethyl acetate (200 ml ¡Á 2) extraction, and combined with the organic layer dried with anhydrous sodium sulfate. Filtering, the filtrate concentrated under reduced pressure, the resulting residue is purified by silica gel column chromatography (dichloromethane / methanol (v / v) = 50/1) to obtain the title compound as yellow solid (2.76g, 68%) .

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd.; Jinchuan, Fei; Gao, Heng; Zhang, Ji; Zhang, Yingjun; (84 pag.)CN105461699; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 6523-49-5, These common heterocyclic compound, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Formamidine from step 1(2.96 g, 9.6 mmol) and 4-triazolylaniline (1.54 g, 9.6 mmol) in AcOH (10 ml) were heated to reflux for 3 h. The cooled solution was diluted with ether (200 ml) and the resulting precipitate filtered off. The filter cake was washed with ether, dried under suction then slurried with 2N NaOH (100 ml) with stirring for 30 minutes. The resulting solid was again isolated by filtration, washed with water and dried to give a pale yellow solid (3.81 g, 93 %). 1H NMR deltaltheta.11 (IH, s), 9.30 (IH, s), 8.80 (IH, s), 8.65 (IH, s), 8.26 (IH, s),8.23 (IH, s), 8.10 (2H, d, J 10Hz)5 7.92 (2H5 d, J 10Hz ), 7.88 (IH, d, J7.5Hz), 7.47 (2H, overlapping s), 7.16 (IH, d, J7.5Hz), 3.93 (3H, s), 3.85 (3H, s); LC-MS rt 2.17 m/z 425 ES+.

The synthetic route of 6523-49-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics