Triazoles

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, Recommanded Product: 1H-[1,2,3]Triazole-4-carboxylic acid

[0839] lH-1,2,3-triazole-4-carboxylic acid (3.8 mg, 34f.tmol)was combined withHATU (12.9 mg, 34 flillOl) inDMF(2 mL) and stirred at room temperature for 15 minutes. Compound3 (13 mg, 31 f.tmol) and DIPEA (16 f.LL, 92 flillOl) werethen added. The solution was stirred at room temperature for15 minutes, at which time LCMS showed reaction completion. The solvent was removed in vacuo and the crude residuewas purified by reverse phase chromatography to yield Compoundb (15 mg) as a TFA salt. MS m/z [M+Ht calc’d forC25H29CIFN50 4 , 518.19. found 518.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-[1,2,3]Triazole-4-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 61-82-5

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

According to the analysis of related databases, 61-82-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

The 1, 2, 3-triazole (3.45g, 50mmol), 2-iodo-5-methyl benzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘-dimethyl -1 , 2-cyclohexanediamine (0.51g, 3. 6mmol), cuprous iodide (0.38g, 2mmol) and N, N-dimethyl formamide (30 ml) are sequentially added to the 100 ml round bottom flask in a single port, the resulting reaction mixture under the protection of nitrogen is gradually heated up to 100 C, reaction 4 hours. Stop the reaction, cooling to room temperature to be reacted, water (150 ml) is diluted, and using ethyl acetate (200 ml ¡Á 2) extraction . Remove organic layer, the aqueous layer with concentrated hydrochloric acid (the mass fraction is 36.5%) acidified to pH to 1-2, then using ethyl acetate (200 ml ¡Á 2) extraction, and combined with the organic layer dried with anhydrous sodium sulfate. Filtering, the filtrate concentrated under reduced pressure, the resulting residue is purified by silica gel column chromatography (dichloromethane / methanol (v / v) = 50/1) to obtain the title compound as yellow solid (2.76g, 68%) .

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd.; Jinchuan, Fei; Gao, Heng; Zhang, Ji; Zhang, Yingjun; (84 pag.)CN105461699; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 15294-81-2, These common heterocyclic compound, 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 14e (0554) 4,5-Dibromo-2-methyl-2H-l,2,3-triazole Batch 1 : To a solution of 4,5-dibromo-lH-triazole (Intermediate 14f; 490.00 g, 2.16 mol) in DMF (3.2 L) was added potassium carbonate (358.23 g, 2.59 mol). The mixture was cooled to -10C under a nitrogen atmosphere and iodomethane (147.91 mL, 2.38 mol) was added dropwise. The reaction was then stirred at 25C for 16 hours. Batch 2: To a solution of 4,5-dibromo-lH-triazole (Intermediate 14f; 400 g, 1.76 mol, 1.00 eq) in DMF (2.8 L) was added potassium carbonate (291.9 g, 2.11 mol). The mixture was cooled to – 10C under a nitrogen atmosphere and iodomethane (131.48 mL, 2.11 mol) was added dropwise. The reaction was then stirred at 25C for 16 hours. Batches 1 and 2 were then combined and the reaction was quenched by the addition of water (4.2 L) and the aqueous phase extracted with MTBE (7 L x 3). The organic extract was concentrated under vacuum to approximately 700 mL and isopropanol (2 L) was added dropwise. This mixture was then stirred at 25 C for 2 hours and the resulting precipitate filtered and dried under vacuum to afford undesired 4,5-dibromo-l-methyltriazole (220 g, 23.5%) as a solid which showed the following NMR spectral data: FontWeight=”Bold” FontSize=”10″ H NMR (400MHz, CDCb) delta 4.09 (s, 3H). 13CNMR (400MHz, CDCb) delta 123.03, 113.09, 37.00. The filtrate was concentrated under vacuum to afford an oil, isopropanol (1 L) was added and resulting solution was warmed to 50 C and then water (3 L) was added dropwise. The mixture was cooled to 25C and stirred for 5 hours and the resulting precipitate was collected by filtration, washed with water (300 mL x 2) and, dried under vacuum at 50C for 16 hours to afford 4,5-dibromo-2- methyl-2H-l,2,3-triazole (Intermediate 14e; 570 g, 60.8% yield) as a solid. FontWeight=”Bold” FontSize=”10″ H NMR (400MHz, CDCb) delta 4.18 (s, 3H). 13C NMR (400MHz, CDCb) delta 124.25, 43.07.

The synthetic route of 15294-81-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 41253-21-8 as follows.

To a solution of 4-cyclohexyl-4-methansulfonyloxymethyl-piperidine-1-carboxylic acid tert-butyl ester (39 g, 103.8 mmol) in N,N-dimethylformamide (200 mL) is added sodium triazole (38 g, 415.2 mmol). The resulting solution is heated to 100 C. for 24 hours then cooled to room temperature. The solvent is removed under reduce pressure and the crude product purified over silica (80:20 EtOAc:hexane) to afford 28.7 g (79.7% yield) of the desired compound as a colorless solid. 1H NMR (CD3OD) delta 0.95-1.90 (m, 15H), 1.46 (s, 9H), 3.45-3.55 (m, 4H), 4.34 (s, 2H), 7.99 (s, 1H), 8.48 (s, 1H). MS (ESI) m/z 349, (M+H+), 371(M+Na+)

According to the analysis of related databases, 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; The Procter & Gamble Company; US2003/236230; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 162848-16-0, name is 4-[1,2,4]Triazol-1-yl-benzoic acid, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 162848-16-0

A mixture of Co(NO3)2¡¤6H2O (29 mg, 0.1 mmol) and 4-Htba(19mg, 0.1mmol) in 8 mL mixed solvent (DMF 2 mL, CH3OH4 mL, H2O 2 mL) was firstly stirred at room temperature for 15 min; then, the mixed solution was sealed into a pressure glassbottle (15 mL) equipped with a Teflon lid and heated at 100 C for 48 h. Pink block crystals of complex 4 were obtained (yield73%, based on ligand). Anal. Calcd. (%) for C18H20N6O8Co: C,42.61; H, 3.97; N, 16.57. Found (%): C, 42.58; H, 3.92; N,16.50. IR (KBr, cm-1): 3400(br, m), 3117(m), 1531(s),1387(s), 1150(m), 978(m), 785(m), 673(w), 509(w).

According to the analysis of related databases, 162848-16-0, the application of this compound in the production field has become more and more popular.

Reference:
Article; Wang, Da-Wei; Wang, Tao; Du, Lin; Zhou, Jie; Yan, Tong; Zhao, Qi-Hua; Structural Chemistry; vol. 29; 4; (2018); p. 1013 – 1023;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-67-7, These common heterocyclic compound, 16681-67-7, name is 4-Bromo-2-methyl-2H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a microwave tube equipped with a stifling bar, (R)-4-((R)-1-((1-cyclopropyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-benzo[d]imidazol-7-yl)oxy)ethyl)pyrrolidin-2-one (120 mg, 0.292 mmol), 4-bromo-2-methyl-2H-1,2,3-triazole (94.5 mg, 0.584 mmol), 1,2-dimethoxyethane (3 mL), 1 N Na2CO3 aqueous solution (0.96 mL, 0.96 mmol) were added, the mixture was bubbled N2 for 5 minutes before Pd(PPh3)4 (33.7 mg, 0.029 mmol) was added. The tube was sealed and heated in microwave at 140 C. for 15 minutes. DCM (200 mL) was added and the resulting mixture was washed with saturated NaHCO3 aqueous solution (20 mL¡Á4), brine (20 mL¡Á1), dried over anhydrous Na2SO4, filtered, removed solvents in vacuo. The resulting residue was passed a ISCO silica gel column (MeOH:DCM=5:95) to give off-white solids, 81.7 mg (yield 76.4%).

Statistics shows that 4-Bromo-2-methyl-2H-1,2,3-triazole is playing an increasingly important role. we look forward to future research findings about 16681-67-7.

Reference:
Patent; Gilead Scientific Systems, Inc.; Cory, Kevin S; Doo, Jimin; Farrand, Julie; Guerrero, Juan A; Katana, Ashley A; Cato, Daryl; Laisaweed, Scott I; Lee, Jiayao; Lingco, John O; Nicolaus, May; Notte, Gregory; Phyen, Hyeoung-Jung; Sangy, Michael; Sumit, Arun C; Adam J, Surayyah; Stephens, Cork L; Venkatraman, Chandrasekar; Watkins, William J; Yang, Jong Yu; Jabloki, Jeff; Jifel, Shiela; Ro, Jennifer; Lee, Sung H; Jao, Chung Dong; Grove, Jeffery; Su, Jianjun; Blomgren, Peter; Mitchell, Scott A; Shyung, Jin Ming; Chandrasekar, Jayaraman; (460 pag.)KR2016/37198; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., category: Triazoles

5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (11.94 gm, 0.058 moles) and DCM (15 ml) were charged in round bottom flask at room temperature. The reaction mixture was cooled to 0-5 C. and oxalyl chloride (5.07 mL, 0.058 moles) was added under inert atmosphere followed by the addition of DMF (1.18 mL, 0.0152 moles). The temperature of reaction mixture was raised to RT and stirred for 2 h. (R)-1-benzyl-5-methyl-1,4-diazepane (12 g, 0.058 moles, formula VII. DBT salt was neutralized with NaOH to obtain free base), triethyl amine (16.57 mL, 0.1176 moles) and DCM (500 mL) were taken in another RBF at 0-5 C. and stirred at room temperature for 2 h. The resulting mixture was slowly added to mixture containing triazole at 0-5 C. and stirred. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was diluted with water and extracted with DCM (2*7.5 mL). The combined organic layer was dried over Na2SO4 and concentrated under reduced pressure to give crude material. The obtained crude material was purified by column chromatography using silica gel (60-120 mesh), 2% MeOH-DCM as an eluent to give (R)-(4-benzyl-7-methyl-1,4-diazepan-1-yl)(5-methyl-2-(2H-1,2,3-triazol-2-yl)phenyl)methanone (Formula IX, 18 g) as a brown color liquid. The obtained crude compound was used for the next step without any further purification.

The synthetic route of 956317-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DR. REDDY’S LABORATORIES LIMTED; IQBAL, Javed; DAHANUKAR, Vilas Hareshwar; ORUGANTI, Srinivas; KANDAGATLA, Bhaskar; (23 pag.)US2016/168138; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4928-87-4, A common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 1 was prepared using the branched tube method [11]: 1H-1,2,4-triazole-3-carboxylic acid (0.117 g, 1 mmol), potassium iodide (0.166 g, 1 mmol) and lead(II) nitrate (0.331 g, 1 mmol) were placed in the arm to be heated. Water was carefully added to fill both arms, and then the arm to be heated was placed in a bath at 60 C. After 10 days, yellow crystals were deposited in the cooler arm which were filtered off, washed with water and air dried. (0.28 g, yield 63%), m.p. > 300 C. Anal. Calc. for C3H2IN3O2Pb: C, 8.07; H, 0.45; N, 9.41. Found: C, 8.15; H, 0.43; N, 9.63%. IR (cm-1) selected bands: 810(m), 981(m), 1280(m), 1453(vs), 1622(vs), 3102(br) and 3444(br).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Safarifard, Vahid; Morsali, Ali; Inorganica Chimica Acta; vol. 398; (2013); p. 151 – 157;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-88-5, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 16 A mixture of methyl 1,2,4-triazole-3-carboxylate (1.27 g, 0.01 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (3.18 g, 0.01 mole) was melted and then 0.076 g of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for 3 hours, while maintaining the temperature of the reaction mixture at 95+-5¡ã C. And then, the reaction mixture was crystallized with 20 ml of isobutanol to give 2.92 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 92percent).

The chemical industry reduces the impact on the environment during synthesis Methyl 1H-1,2,4-triazole-3-carboxylate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics