Triazoles

Electric Literature of 16681-70-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

[0819] lH-1,2,3-triazole-5-carboxylic acid (3.4 mg, 30f.tmol) was combined with HATU (11 mg, 30 f.tmol) in DMF(0.3 mL) stirred at room temperature for 10 minutes; DIPEA(1 eq.) was added and the mixture was stirred for 1 minute.Compound 2 (10 mg, 30 f.tmol) was dissolved in DMF (0.5mL) and DIPEA (5.2 f.LL, 30 f.tmol) was added, followed byaddition of the activated acid solution. The mixture wasstirred at room temperature for 30 minutes, after which timeLCMS indicated desired product formation. Half of the crudeproduct was purified using reverse phase chromatography toyield Compound a (5.2 mg) as a TFA salt. MS m/z [M+Htcalc’d for C27H31ClFN50 4 , 544.21. found 544. Half of thecrude product was used in the next step without purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-[1,2,3]Triazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 20725-34-2,Some common heterocyclic compound, 20725-34-2, name is 1-(4-Bromophenyl)-5-methyl-1H-1,2,3-triazole-4-carboxylic acid, molecular formula is C10H8BrN3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of compound 7 (5 mmol) in POCl3(15 mL), a solution of compound 11 (5 mmol) in ethanol (25 mL) was added and the reaction mixture was heated under reflux for 14 h under anhydrous conditions. The solvent was distilled in vacuo, the residual mass was poured over crushed ice and the excess POCl3 was neutralized with 10% sodium bicarbonate solution. The solid thus separated was filtered, washed with 10% sodium bicarbonate solution and finally with water, dried and purified by recrystallization from ethanol to give pure compounds12a-j.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-(4-Bromophenyl)-5-methyl-1H-1,2,3-triazole-4-carboxylic acid, its application will become more common.

Reference:
Article; Sanjeeva Reddy; Vani Devi; Sunitha; Kalyani; Nagaraj; Indian Journal of Chemistry – Section B Organic and Medicinal Chemistry; vol. 55B; 5; (2016); p. 590 – 597;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., name: 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (150 mg, 1.81 mmol) was added THF (15 mL) and the colorless homogeneous solution was cooled to -43 C. using a CH3CN-CO2 bath. n-BuLi (2.5M in hexanes, 0.7 mL, 1.75 mmol) was added drop wise via syringe which afforded an opaque mixture. The suspension was stirred at -40 C. for 30 min, then a THF solution of tert-butyl-3-(4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline-6-carbonyl)azetidine-1-carboxylate (430 mg, 0.8 mmol, in 2 mL THF, Intermediate 66: step b) was introduced at -40 C. The reaction mixture was allowed to warm gradually to room temperature over 45 min and then quenched with NH4Cl solution. The aqueous portion was extracted with EtOAc (3*30 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated to provide an amber gum. Chromatography on silica gel (10% acetone-hexane increasing to 30% acetone) afforded the title compound (170 mg) as a white amorphous solid. 1H NMR (500 MHz, CDCl3) delta 8.24 (d, J=2.1 Hz, 1H), 7.78 (d, J=8.8 Hz, 1H), 7.56-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.35 (dd, J=8.7, 2.1 Hz, 1H), 4.35 (s, 2H), 4.20 (t, J=8.8 Hz, 1H), 4.07 (s, 3H), 4.00 (dd, J=9.3, 5.6 Hz, 1H), 3.92 (dd, J=8.9, 5.7 Hz, 1H), 3.67 (s, 3H), 3.62 (t, J=8.8 Hz, 1H), 3.52-3.38 (m, 1H), 1.38 (s, 9H). MS (ESI): mass calcd. for C30H31ClF3N5O4: 618.06, m/z found 619.9 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7411-23-6 as follows. Recommanded Product: 3,5-Dibromo-1H-1,2,4-triazole

General procedure: A mixture of salt 1a (1 g, 2.9 mmol), 3,5-dibromo-1,2,4-triazole (0.66 g, 2.9 mmol), and K2CO3 (1.20 g, 8.7 mmol) in DMF (10 ml) was refluxed for 2 h. The mixture was cooled and poured into water (50 ml). The precipitate formed was filtered off and recrystallized from DMF.

According to the analysis of related databases, 7411-23-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Osyanin; Osipov; Klimochkin, Yu. N.; Chemistry of Heterocyclic Compounds; vol. 47; 12; (2012); p. 1607 – 1609; Khim. Geterotsikl. Soedin.; vol. 47; 12; (2011); p. 1914 – 1916,3;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67545-00-0, name is 4-Amino-1-methyl-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C3H6N4

A solution of (2S,3S)-2-(fluoromethyl)-7-(methylcarbamoyl)-3-phenyl-2,3-d ihydrobenzofuran5-carboxylic acid (80 mg, 0.24 minol) and HATU (111 mg, 0.292 minol) in DMSO (0.85 mL) was treated at rt with DIPEA (0.127 mL, 0.729 minol) and the reaction minxture was stirred at this temperature for 5 min then was treated with 1-methyl-1H-1,2,3-triazol-4-amine (23.8 mg, 0.243minol). The resulting minxture was stirred for 1 h at rt. Further HATU (111 mg, 0.292 minol) and DIPEA (0.127 mL, 0.729 minol) were then added and the reaction minxture left to stir at rt for 5 min before being treated with 1-methyl-1H-1,2,3-triazol-4-amine (23.8 mg, 0.243 minol). The reaction minxture was then stirred for 1 h at rt then was left to stand over the weekend. It was then purified by MDAP (method high pH) to give (2S,3S)-2-(fluoromethyl)-N7-methyl-N5-(1-methyl- 1H- 1,2,3-triazol-4-yl)-3-phenyl-2,3-dihydrobenzofuran-5,7-dicarboxaminde (69.5 mg, 70%) as a yellow solid. LCMS (method forminc): Retention time 0.89 min [M+H] = 410

According to the analysis of related databases, 67545-00-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ATKINSON, Stephen, John; DEMONT, Emmanuel, Hubert; HARRISON, Lee, Andrew; PRESTON, Alexander, G.; SEAL, Jonathan, Thomas; WALL, Ian, David; WATSON, Robert, J.; WOOLVEN, James, Michael; (214 pag.)WO2017/174620; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 64922-04-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 64922-04-9 name is Ethyl 1H-1,2,4-triazole-5-carboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Preparation of Intermediate 1: 4-(3-Methanesulfonyloxymethyl-[l,2,4]triazol-l- yl)-piperidine-l-carboxylic acid tert-butyl esterStep 1: 4-(3-Methoxycarbonyl-[l,2,4]triazol-l-yl)-piperidine-l-carboxylic acid tert-butyl ester; To a solution of IH-[1, 2,4]triazole-3-carboxylic acid ethyl ester (1.05 g, 8.23 mmol) in dimethylformamide (50 rnL) was added sodium hydride (60%, 0.395 g, 9.88 mmol). The solution was stirred at room temperature for 20 minutes followed by 1 hour at 70 0C. 4-methanesulfonyloxy-piperidine-l-carboxylic acid tert-butyl ester (2.3 g, 8.23 mmol) was then added in a single portion and heated at 70 0C for 40 hours. The solution was cooled to 0 0C and the salt precipitate was removed by filtration. The filtrate was diluted with dichloromethane and washed with water, brine, dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by flash chromatograph on silica gel with Hexanes and EtOAc to afford the desired product. 1H NMR (CDCl3): 5 8.18 (IH, s), 4.40 (IH, m), 4.22 (2H, m), 3.96 (3H, s), 2.82 (2H, m), 2.12 (2H, m), 1.94 (2H, m), 1.41 (9H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ethyl 1H-1,2,4-triazole-5-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; METABOLEX, INC.; WO2009/14910; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., name: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

Step C: (¡À)-trans-(2-(2H-1,2,3-triazol-2-yl)phenyl)(3-((5-bromopyridin-2-yl)amino)-2-methylpiperidin-1-yl)methanone. The title compound from Step B (50 mg), DIPEA (1 mL), intermediate A-4 (100 mg) and HATU (200 mg) were stirred in THF at rt for 3 h. Upon completion of the reaction, purification was performed using preparative HPLC to give the title compound (20 mg, 55% yield). MS (ESI) mass calcd. for C20H21BrN6O, 440.2; m/z found 441.1 [M+H]+. 1H NMR (CDCl3): 8.11-7.26 (m, 8H), 7.11-5.91 (m, 1H), 5.19-4.55 (m, 1H), 4.26-2.68 (m, 3H), 2.11-0.71 (m, 7H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; Dvorak, Curt A.; Shireman, Brock T.; US2014/275095; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C3H6N4

3,4-Dimethylfuran-2,5-dione (550 mg, 4.36 mmol, 1.05 equiv) and 1-methyl-1H-1,2,4-triazole-3-amine (407 mg, 4.15 mmol, 1.00 equiv) were dissolved in concentrated acetic acid (15 ml) and stirred under reflux conditions for 7 h. After cooling to room temperature, water and ethyl acetate were added and the mixture was extracted. The aqueous phase was repeatedly re-extracted vigorously with ethyl acetate, and the combined organic phases were then dried over magnesium sulfate, filtered and concentrated. Final purification by column chromatography of the resulting crude product (gradient ethyl acetate/heptane) gave 3,4-dimethyl 1-(1-methyl-1H-1,2,4-triazol-3-yl)-1H-pyrrole-2,5-dione in the form of a colorless solid (90 mg, 10% of theory). 1H-NMR (400 MHz, d6-DMSO delta, ppm) 8.09 (s, 1H), 3.75 (s, 3H), 2.01 (s, 6H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 49607-51-4.

Reference:
Patent; Bayer CropScience Aktiengesellschaft; Bayer Aktiengesellschaft; FRACKENPOHL, Jens; HELMKE, Hendrik; FRANKE, Jana; REINGRUBER, Anna Maria; MACHETTIRA, Anu Bheemaiah; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; LUEMMEN, Peter; (96 pag.)US2019/330192; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7343-34-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7343-34-2 name is 3,5-Dimethyl-4H-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

5-cWoro-3-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)pyridazine (23-2): To a stirring solution of 3,5-dichloropyridazine (23-1, 5.00 g , 33.5 mmol, 1.0 eq.) in tetrahydrofuran (125 ml) at 0 ¡ãC was added cesium carbonate (17.7 g, 50.3 mmol, 1.5 eq.), followed by 3,5-dimethyl-lH-l,2,4~triazole (3.25 g, 33.5 mmol, 1.0 eq.) in tetrahydrofuran (125 mL) dropwise. The resulting reaction mixture was stirred for 1 hour at the same temperature and then warmed to room temperature and stirred for another 3 hours, then heated to 60 ¡ãC and stirred for 6 hours. The solvent was removed under reduced pressure and the residue was diluted with water (200 mL) and extracted with DCM (3 chi 80 mL). The combined organic layers were dried over Na2S04, filtered and concentrated. The residue was purified by silica gel column chromatography (70percent ethyl acetate in hexanes) to afford 5-chloro-3-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)pyridazine (23-2) as a white solid. 1H NMR (300 MHz, CDC13) delta 9.11 (d, 1H, J= 2.1 Hz), 8.20 (d, 1H, J= 2.1 Hz), 2.96 (s, 3H), 2.43 (s, 3H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dimethyl-4H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; DUDKIN, Vadim, Y.; KIM, June, J.; KUDUK, Scott, D.; MCVEAN, Carol; REGER, Thomas; STEEN, Justin; STEELE, Thomas; WO2013/52526; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7411-23-6, A common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Sodium hydrogen (423.17 mg) was added to a N,N-dimethylformamide solution (10 ml) of a compoundWX123-1 (2.0 g) at 0C, and the reaction was stirred for 0.5 hour at 0C. Isopropane iodide (1.57 g) was added to thereaction solution and the reaction was stirred at 25 C for 14 hours. After the reaction was completed, water (10 ml) wasadded to quench the reaction, and then water (20 ml) was added, and the solution was extracted with ethyl acetate (20ml) for three times. The mixed organic phase was washed with water (20 ml) twice, dried with anhydrous sodium sulfate,and then filtered and concentrated to obtain a crude product WX123-2. 1H NMR (400MHz, CHLOROFORM-d) delta = 3.88- 3.75 (m, 3H).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Shandong Danhong Pharmaceutical Co., Ltd.; LUO, Zhi; LI, Xiaolin; YANG, Yaxun; YANG, Lele; LI, Peng; HE, Haiying; LI, Jian; CHEN, Shuhui; (155 pag.)EP3626699; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics