Triazoles

1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C2H5N5

2-Hydroxybenzaldehyde (0.02 mol L1, 2 mL) in ethanol (10 mL)was added to a magnetically stirred solution of 3,5-diamino-1,2,4-triazole (0.01 mol L1, 0.99 mg) in ethanol (20 mL). The mixture was refluxed for 2 h. The reaction was monitored through TLC.During refluxing yellow precipitates started forming. It was refluxed for another half an hour. It was then cooled to room temperature, filtered, washed with cold ethanol (2 10 mL) thenwith ether (2 5 mL), dried and recrystallized in a mixture of hot ethanol and ether (2:1).2.3. 2-{(E)-[(3-{[(Z)-(2-hydroxyphenyl)methylidene]amino}-1H-1,2,4-triazol-5-yl)imino]methyl}phenol (L)Yield: (1.63 g, 75percent); mp: 244 ¡ãC; color (yellow): IR (cm-1): 3429(OH), 3195 (N-H), 1634 (HC=N), 1604 (C=N) and 1023 (N-N); 1HNMR (ppm DMSO?d6): d 12.81 (s, 1H, NH), 12.14 (s, 1H, OH), 9.16 (s,2H, C7-H, C7,-H), 6.97-7.69 (m, Ar-H); 13C NMR (DMSO?d6):d 157.19 (C8,C8,), 160.67 (C7,C7,), 168.54 (C1, C1,), 117.05-133.93(Ar-C); Mass Spectrum EIMS m/z (percent): 307.31: [M], 308.0(10),277.1(17), 204.1(13), 185.1(100), 171.1(6), 157.0(4). Anal. Calc. for C16H13N5O2 (307.31): C, 62.53 (62.45); H, 4.26 (4.20); N, 22.79(22.72).

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sumrra, Sajjad Hussain; Kausar, Samia; Raza, Muhammad Asam; Zubair, Muhammad; Zafar, Muhammad Nadeem; Nadeem, Muhammad Arif; Mughal, Ehsan Ullah; Chohan, Zahid Hussain; Mushtaq, Fazila; Rashid, Umer; Journal of Molecular Structure; vol. 1168; (2018); p. 202 – 211;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 13423-60-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows.

EXAMPLE 111 1-phenyl-4-(tetradec-1-yl)triazolium bromide 0.300 g (0.002 mol) 1-phenyltriazole 1 and 1.500 g (0.006 mol) 1-bromotetradecane 2 were dissolved in a pressure tube in 7 ml THF. The reaction mixture was stirred 4 d at 110 C. THF was removed because of the parallel positive experiences of solvent-free synthesis and the mixture stirred for 4 h at 110 C. To the obtained solid 10 ml petroleum ether was added. The product is filtered off, washed with petroleum ether, and dried in high vacuum. M 422.53 C22H36N3Br Yield: 0.4632 g (59%) 1H-NMR DM-108 (300 MHz/DMSO): (ppm)=0.86 (t, 3H, 20-H); 1.25 (m, 24H, 9-19-H); 1.94 (q, 2H, 8-H); 4.32 (t, 2H, 7-H); 7.70 (m, 3H, 5/5’/6H); 7.96 (d, 2H, 4/4′-H); 9.50 (s, 1H, 1-H); 10.97 (s, 1H, 2-H) 13C-NMR DM-108 (75.475 MHz/DMSO):

The chemical industry reduces the impact on the environment during synthesis 1-Phenyl-1H-1,2,4-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, A new synthetic method of this compound is introduced below., SDS of cas: 584-13-4

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7343-34-2, Computed Properties of C4H7N3

Intermediate 2 4-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)-6-iodo-2-methylpyrimidine (Intermediate 2) A mixture of 4,6-dichloro-2-methylpyrimidine (505 mg, 3.1 mmol), 3,5-dimethyl-lH-l,2,4- triazole (300 mg, 3.1 mmol) and CS2CO3 (1.54 g, 4.7 mmol) in THF (20 mL) was heated at reflux overnight. The mixture was filtered and the filtrate was concentrated to give 4-chloro-6- (3,5-dimethyl-lH-l,2,4-triazol-l-yl)-2-methylpyrimidine that was used without further purification. MS: m/z = 224.1 (M+H). To a mixture of 4-chloro-6-(3,5-dimethyl-lH-l,2,4-triazol-l-yl)-2-methylpyrimidine (2.00 g, 8.9 mmol), KI (4.44 g, 26.8 mmol) was added 57percent aq. HI solution (20 mL, 89.2 mmol). After heating at 70 ¡ãC for 5 min, water (20 mL) was added to the reaction mixture. The white solid was filtered, rinsed with water, and dried under vacuum to give Intermediate 2 as a white solid. XH NMR (400 MHz, DMSO) delta 8.06 (s, 1H), 2.78 (s, 3H), 2.62 (s, 3H), 2.30 (s, 3H). MS: m/z = 316.1 (M+H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dimethyl-4H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; MCCOMAS, Casey, C.; REGER, Thomas, S.; WO2014/78216; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2 Preparation of 4,5-dibromo-2H-1,2,3-triazole NBS (123 g, 690 mmol), K2CO3 (0.8 g, 5.8 mmol) and IPAc (300 mL) are added into a round bottom flask with the internal temperature of the flask keep at 20 C. Then, 1H-1,2,3-triazole (19 mL, 330 mmol) is slowly added in the flask by keeping internal temperature of the reaction mixture below 40 C. The reaction mixture is stirred at 20 C. for 5 h, and then filtered. The filter cake is washed with IPAc (30 mL), and then the filter cake is discarded. The filtrate is washed with 2% NaS2O3 (100 mL). The solvent of the resulting organic layer is distilled under vacuum and the internal temperature of the solvent is kept below 45 C. After the distillation, the obtained product is recrystallized by hexanes (600 mL). The resulting solid is filtered, and the filter cake is washed with hexanes (60 mL). The resulting solid is dried under vacuum at a temperature of no more than 35 C. to afford 70.8 grams of the product. Other R1 heterocycles as contemplated in the present invention can be brominated via similar preparation procedures as outlined above.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Boehringer Ingelheim International GmbH; Eriksson, Magnus Carl Arne; Krishnamurthy, Dhileepkumar; Wang, Xiao-Jun; Zhang, Li; US8410091; (2013); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 202931-88-2, SDS of cas: 202931-88-2

A solution of n-butyllithium in hexanes (1.6 M, 0.71 mE, 1.1 mmol) was added dropwise to a stirring solution of 3-(4-(i R-pyrazol- 1 -yl)benzyl)-6-bromo-4-chloro-2-meth- oxyquinoline (490 mg, 1.1 mmol, Intermediate 4: step d) in tetrahydrofuran (ii mE) at -78C. Afier 2 minutes, a solution of i-methyl-i R-i ,2,3-triazole-5-carbaldehyde (140 mg, 1.1 mmol, Intermediate 18) in tetrahydrofuran (1 mE) was added dropwise. After 5 minutes, the flask was placed into an ice- water bath. Afier 1 hour, water (10 mE) and ethyl acetate (60 mE) were added. The biphasic mixture was stirred for 10 minutes. Ralf-saturated aqueous sodium chloride solution (50 mE) was added and the layers were separated. The organic layer was dried with sodium sulfate and the dried solution was filtered. Silica gel (4 g) was added to the filtrate and the mixture was concentrated by rotary evaporation to afford a free-flowing powder. The powder was loaded onto a silica gel column for flash column chromatography purification. Elution with 100% hexanes initially, grading to 100% ethyl acetate provided the title compound as a white foamwhich was impure. The foam was suspended in methanol (20 mE) and the suspension was sonicated for 5 minutes. The solids were collected by filtration and rinsed with methanol (5 mE). The collected solids were dried to provide the title compound as a white solid. ?H NMR (600 MHz, DMSO-d5) oeppm 8.42 (d, J=2.5 Hz, 1H), 8.21 (d, J=i.8 Hz, 1H), 7.86 (d, J=8.6 Hz, 1H), 7.75-7.71 (m, 2H), 7.72-7.67 (m, 2H), 7.37- 7.32 (m, 3H), 6.55 (d, J=5.2 Hz, 1H), 6.53-6.49 (m, 1H), 6.22 (d, J=5.2 Hz, 1H), 4.30 (s, 2H), 4.04 (s, 3H), 3.97 (s, 3H); MS (ESI): mass calcd. for C24H2,C1N602, 460.1; mlz found, 461.1 [M+H].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; US2015/105372; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 16681-70-2

H. (2S,4R)-5-Biphenyl-4-yl-2-hydroxymethyl-2-methyl-4-[(3H-[1,2,3]triazole-4-carbonyl)-amino]-pentanoic acid isopropyl ester (R4=H; R7=-CH(CH3)2) (2S,4R)-4-Amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid (76 mg, 242 mumol) in MeCN (0.4 mL, 8 mmol) and 4 M HCl in 1,4-dioxane (242 muL, 969 mumol) was combined with propan-2-ol (0.5 mL) at 60 C. The resulting mixture was stirred until solid precipitation was observed (~30 minutes). The solvent was evaporated under vacuum and the solids were azeotroped in toluene and dried under vacuum. 1,2,3-Triazole-4-carboxylic acid (0.0274 g, 0.242 mmol), DIPEA (169 muL, 969 mumol) and HATU (92 mg, 242 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with the dried solids, predissolved in DMF (0.2 mL) and DIPEA (0.5 eq.). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product was purified by preparative HPLC and lyophilized to yield the title compound (38 mg; purity 95%). MS m/z [M+H]+ calc’d for C25H30N4O4, 451.23. found 451.4.

According to the analysis of related databases, 16681-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, A new synthetic method of this compound is introduced below., HPLC of Formula: C15H13N3S

Acetonitrile 600g is first added to a 1L four-neck flask at room temperature.Compound IV (106.9 g, 0.4 mol) was added with stirring.Compound Vc (57.9 g, 0.22 mol) was added. Slowly warm up to 50-55C under nitrogen protection.The solid was completely dissolved and 48g of potassium bicarbonate was added portionwise over 60-80 minutes.After the addition, the reaction was incubated at 50-55C for 3-4 hours. The disappearance of the raw material at TLC indicated that the reaction was complete.After the reaction was completed, insoluble material was removed by hot filtration, and the resulting filtrate was slowly cooled to -5C.A large number of white solids precipitated, and 50 ml of deionized water was added dropwise to the reaction flask over 1-2 hours to crystallize sufficiently.And remove inorganic salts. After deionized water is added, it is crystallized at -5C for 2 hours and filtered.The filter cake was washed with 100 ml of 95% glacial acetonitrile. The resulting compound (IIIc) was vacuum-dried,Dry at a temperature of 50-55C for 24 hours. 120.3 g of compound (IIIc) was obtained with a yield of 83%.

The synthetic route of 1533519-84-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Xin Donggang Pharmaceutical Co., Ltd.; Yan Jianbo; Ma Liangxiu; Lin Yi; Hong Huabin; (16 pag.)CN107739344; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7343-33-1 as follows. Recommanded Product: 5-Bromo-1H-1,2,4-triazole

To a 250 mL reaction flask was added 3-bromo-1H-1,2,4-triazole (5 g, 33.8 mmol), CuI (0.644 g, 3.38 mmol) and Cs2CO3 (11.01 g, 33.8 mmol). The flask was evacuated/backfilled with nitrogen gas, and then DMSO (33.8 ml) and 1-iodo-4-(trifluoromethoxy)benzene (4.87 g, 16.90 mmol) were added. The reaction mixture was heated to 100¡ã C. for 20 hours (h). The reaction wascooled to room temperature (RT), diluted with EtOAc and filtered through a plug of Celite?. The Celite? was further washed with EtOAc. Water was added to the combined organics, and the layers were separated. The aqueous phase was neutralized to pH 7, and further extracted with EtOAc. The combined organics were concentrated in vacuo. Purification via flash column chromatography using EtOAc/hexanes as eluent provided the title compound as an off-white solid (3.78 g, 73percent): mp 69-70¡ã C.; 1H NMR (400 MHz, CDCl3) delta 8.44 (s, 1H), 7.70 (d, J=8.9 Hz, 2H), 7.38 (d, J=8.5 Hz, 2H); 19F NMR (376 MHz, CDCl3) delta-58.04; EIMS m/z 307 ([M]+)

According to the analysis of related databases, 7343-33-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; GIAMPIETRO, Natalie C.; CROUSE, Gary D.; US2014/275556; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., Application In Synthesis of 1,2,4-Triazole-3-carboxylic acid

To a mixture of 1H-1,2,4-triazole-3-carboxylic acid (118 mg, 1.044 mmol) and HATU (429 mg, 1.13 mmol) in DMF (2.2 mL) was added DIPEA (325 muL, 1.87 mmol) and the mixture was stirred for 15 min. Then tert-butyl 2,2-dimethylpiperazine-1- carboxylate (200 mg, 0.93 mmol) is added followed by DIPEA (240 muL, 1.38 mmol) and the mixture was stirred for another 90 min. Saturated NH4Cl was added (5 mL), followed by EtOAc (10 mL). The layers were separated and the aqueous layer extracted with EtOAc (2 x 5 mL). The combined organic extracts were washed with brine (5 mL), dried over Na2SO4, filtered and concentrated. The residue was purified by flash chromatography on silica gel eluting with 0-15% MeOH: DCM affording the title compound (263 mg, 91% yield) as an off-white solid. ESI-MS m/z calc.309.18008, found 310.35 (M+1)+ Retention time: 1.22 minutes using method C

According to the analysis of related databases, 4928-87-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; SAYEGH, Camil Elie; STURINO, Claudio; FOURNIER, Pierre-Andre; LACOSTE, Jean-Eric; DIETRICH, Evelyne; MARTEL, Julien; VALLEE, Frederic; (494 pag.)WO2016/154075; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics