Triazoles

Some common heterocyclic compound, 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde, molecular formula is C4H5N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 202931-88-2

[00377] (¡ê’)-3-(l-methyl-lH-l,2,3-triazol-5-yl)-l-(thiazol-2-yl)prop-2-en-l-one was prepared from l-(thiazol-2-yl)-2-(triphenyl- 5-phosphanylidene)ethan-l-one and 1-methyl- lH-l,2,3-triazole-5-carbaldehyde via Wittig reaction using synthetic procedures described for the preparation of the analog SW209415. ESI-MS (m/z): 221.1 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 202931-88-2, its application will become more common.

Reference:
Patent; CASE WESTERN RESERVE UNIVERSITY; BOARD OF REGENTS OF THE UNIVERSITY OF TEXAS SYSTEM; MARKOWITZ, Sanford D.; READY, Joseph; ZHANG, Yongyou; ANTCZAK, Monika; WILLSON, James K.V.; POSNER, Bruce A.; GREENLEE, William; (254 pag.)WO2016/168472; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life.

1,2,3-triazole (3.45 g, 50 mmol), 2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol), cesium carbonate (0.57 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol), trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol), N, N-dimethylformamide (30 mL)was added sequentially to a 100 mL single-necked round bottom flask and gradually heated under nitrogen to 100 C for 4 hours. The reaction was quenched, cooled, diluted with tap water and washed with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1~2) and extracted with ethyl acetate (200 mL x 2). The organic layers were combined and dried over anhydrous sodium sulfate. The filtrate was evaporated under reduced pressure and purified by column chromatography (dichloromethane / methanol (v/v) = 50/1) to give the title compound (yellow solid, 2.76 g, 68%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Dongguan Dongyangguang Pharmaceutical Research And Development Co., Ltd.; Jin Chuanfei; Du Changfeng; Zhang Yingjun; Liu Yanping; Kou Yuhui; (38 pag.)CN106986859; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, A new synthetic method of this compound is introduced below., Recommanded Product: 4928-87-4

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and (3,4- dimethoxybenzyl)amine (0.32 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24 h, and then slowly diluted into iced water and extracted with DCM (50 mL x 2). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (70:30) as eluents to get the desired amide 2 (40.7 mg, 8% yield) as a white solid. 1H-NMR (400 MHz, DMSO-de): <514.74-14.50 (m, 1H), 9.06 (br s, 1H), 8.48-8.46 (m, 1H), 6.97 (m, 1H), 6.90-6.88 (m, 1H), 6.85-6.83 (m, 1H), 4.37 (d, J= 6.4 Hz, 2H), 3.73 (d, J= 3.6 Hz, 6H) ppm. MH+ = 263.2 m/z. The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., Quality Control of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid

General procedure: TEA (1.20 mL, 8.63 mmol) was added to a solution of N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-l-yl] ethanamine dihydrochloride(0.50 g, 1.63 mmol) in CHC13 (5 mL) at room temperature.5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (0.36 g, 1.79 mmol)and propylphosphonic acid anhydride (cyclic trimer) (50% solutionin DMF [approximately 1.6 mol/L], 1.32 mL, 2.12 mmol) wereadded to the reaction solution under cooling in ice water. Theresultant mixture was stirred at 50 C for 5 h. After standing untilcooled to room temperature, water was added thereto, followedby extraction with CHCl3. The organic layer was washed with brine.Then, the organic layer was dried over MgSO4 and the desiccantwas filtered off. Then, the solvent was distilled off under reducedpressure. The obtained residue was purified by column chromatography(20-80% EtOAc in hexanes) and washed with Et2O to yieldthe title compound 4a as a colorless powder (0.51 g, 75%).

The synthetic route of 956317-36-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 16681-65-5

To a flask containing 1-methyl-1H-1,2,3-triazole (125 mg, 1.5 mmol) was added THF (10 mL) and the colorless solution was cooled to -45 C. Then, n-BuLi (2.5 M in hexanes, 0.6 mL, 1.5 mmol) was added affording a suspension. The suspension was stirred between -40 C. and -10 C. for 30 minutes, then a THF solution of (2,4-dichloro-3-phenylquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (500 mg, 1.26 mmol, Intermediate 18: step b, in 5 mL THF) was introduced and the mixture was allowed to warm up to room temperature. After 1 hour, the reaction mixture was heated to 40 C. for 3 hours and then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (3*50 mL) and then with DCM (3*50 mL). The individual organic portions were washed with brine, dried over MgSO4, filtered, combined and concentrated to dryness. Chromatography on silica gel (5% MeOH-DCM increasing to 10% MeOH) provided material which was re-purified by preparative TLC (5% 2 M-NH3-MeOH-EtOAc) to provide the title compound as light tan solid. 1H NMR (500 MHz, CDCl3) delta 8.45-8.36 (m, 1H), 7.94 (d, J=8.8 Hz, 1H), 7.66-7.46 (m, 4H), 7.46-7.30 (m, 2H), 7.01 (s, 1H), 5.94 (s, 1H), 3.91 (s, 3H), 3.34 (s, 3H), 2.17 (s, 3H). MS (ESI): mass calcd. for C24H20Cl2N6O, 478.1, m/z found 479.1 [M+H]+.

The synthetic route of 16681-65-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 3-Methyl-1H-1,2,4-triazole

EXAMPLE 102 [2-Chloro-4-(3-methyl-1,2,4-triazol-1-yl)-phenyl](5H,11H-pyrrolo[2,1-c]-[1,4]benzodiazepin-10-yl)-methanone To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-1,2,4-triazole (0.45 g).. After hydrogen gas evolution ceased, 2-chloro-4-fluorophenyl-(5H,11H-pyrrolo[2,1-c][1,4]benzodiazepine-10-yl)-methanone (1.70 g) was added and the reaction mixture was heated in a sand bath at 110 C for 18 hours.. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane.. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate.. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 1.25 g of the title compound as colorless crystals, m.p. 191-193 C, MS m/z: 404.1 (M+H)+.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wyeth; EP1000062; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 143426-50-0,Some common heterocyclic compound, 143426-50-0, name is 4-(1,2,4-Triazol-1-yl)benzyl Alcohol, molecular formula is C9H9N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of (4-(1 H-1 ,2,4-triazol-1-yl)phenyl)methanol (133 mg, 0.76 mmol) in dry DCM (2 mL), SOCI2 (0.1 mL, 1.52 mol) was added at 0 C and the resulting mixture was stirred for 3 h at RT. The completion of the reaction was monitored by TLC. The reaction mixture was concentrated under vacuum and the resulting product was co-distilled with DCM (2 x 10 mL) to get the title compound that was used without any further purification. Yield: 60% (1 10 mg, pale yellow solid). 1H NMR (400 MHz, DMSO -cfe): d 9.33 (s, 1 H), 8.26 (s, 1 H), 7.89 (d, 8.8 Hz, 2H), 7.64 (d, J = 8.8 Hz, 2H), 4.85 (s, 2H). LCMS: (Method A) 194.1 (M+H), Rt.1.73 min, 79.10% (Max).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(1,2,4-Triazol-1-yl)benzyl Alcohol, its application will become more common.

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; WISHART, Grant; KULKARNI, Santosh S.; RAKESH, Paul; (338 pag.)WO2020/39027; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 3641-13-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 3641-13-2 as follows.

The organometallic complex [Mo(CO)3Br2(NCMe)2] was preparedaccording to literature methods [1,4,5]. A solution of Mo-II(2.3 g, 5.45 mmol) in ethanol (60 mL) was treated with 3-amino-1,2,4-triazole-5-carboxylic acid (ATZAc) (0.70 g, 5.45 mmol). Theresulting solutionwas stirred for 8 h under reflux and evaporated todryness. The solid obtained was washed with hexane and dried under vacuum (2.22 g of yield) [6]. Elemental Analysis forMoC7O3Br2N2H6 (421.94 g/mol): calculated C 19.90%, N 6.63%, H1.42%, Mo 22.73%; found C 19.76%, N 6.59%, H 1.31%, Mo 22.65%. IR(KBr pellet, cm-1): nu (?CO) =1879, 1974, 204, nu (C?O) =1679. EDS(Full scale 37854 ct cursor: -0.348 (octs), keV): C, N, O, Br, Mo.

According to the analysis of related databases, 3641-13-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Vieira, Eduardo Guimaraes; Dal-Bo, Alexandre Goncalves; Frizon, Tiago Elias Allievi; Dias Filho, Newton Luiz; Journal of Organometallic Chemistry; vol. 834; (2017); p. 73 – 82;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, A new synthetic method of this compound is introduced below., Application In Synthesis of 1H-1,2,4-Triazol-5-amine

General procedure: A mixture of aromaticaldehyde (1.0 mmol) and dimedone(1.0 mmol) with 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol) was stirred in acetic acid (5 mL) at 60 Cfor the appropriate time (Tables 3, 4). The progress of thereaction was monitored by TLC. After completion of thereaction, a thick precipitate was obtained. The solid productwas filtered off and washed with acetic acid (3 ¡Á 2 mL) togive the pure products 4 and 6, and subsequently dried in air.The pure products were characterized by conventional spectroscopicmethods. Physical and spectral data for the compounds,4b, 4c, 4h, 4j, 6a, 6c, and 6h are represented below:

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Hazeri, Nourallah; Habibi-Khorassani, Sayyed Mostafa; Journal of the Iranian Chemical Society; vol. 12; 8; (2015); p. 1419 – 1424;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 7411-23-6

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics