Triazoles

Synthetic Route of 16681-70-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

lH-l,2,3-triazole-4-carboxylic acid (3.8 mg, 34 muiotaetaomicron) was combined with HATU (12.9 mg, 34 muiotaetaomicron) in DMF (2 mL) and stirred at room temperature for 15 minutes. (1374) Compound 3 (60 mg, 137 muiotaetaomicron) and DIPEA (16 mu^, 92 muiotaetaomicron) were then added. The solution was stirred at room temperature for 15 minutes, at which time LCMS showed reaction completion. The solvent was removed in vacuo and the crude residue was purified by reverse phase chromatography to yield Compound b (18.5 mg) as a TFA salt. MS m/z [M+H]+ calc’d for C26H31CIF 5O4, 532.21 ; found 532.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-[1,2,3]Triazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 135242-93-2

f 6-(1-Methyl-1H-1,2,4-triazol-3-ylmethoxy)-7-phenyl-3-(pyrazin-2-yl)-1,2,4-triazolo[4,3-b]pyridazine To a solution of (1-methyl-1H-1,2,4-triazol-3-yl)methanol (prepared using the conditions described in EP-A-421210; 0.044 g, 0.39 mmol) in dimethyl formamide (10 ml) was added sodium hydride (0.016 g of a 60% dispersion in oil, 0.390 mmol) and the reaction mixture was stirred at room temperature under nitrogen for 0.5 h. After this time, the product from Example 1 step e) (0.1 g, 0.325 mmol) was added and the reaction mixture stirred for 2.5 h. The solvent was removed under high vacuum. Water (5 ml) was added to the residue and the solid produced was collected by filtration. The solid was recrystallized from ethyl acetate/ethanol to give the required product (0.049 g, m.p. 256.9-257.8 C.). 1H NMR (360 MHz, CDCl3) delta 3.94 (3H, s), 5.62 (2H, s), 7.47 (3H, m), 7.67 (2H, m), 8.04 (1H, s), 8.10 (1H, s), 870 (1H, s), 8.84 (1H, s), 9.80 (1H, s) MS (ES+) m/e 386 [MH+].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 135242-93-2, its application will become more common.

Reference:
Patent; Merck Sharp & Dohme Ltd.; US6297235; (2001); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 31250-99-4, name is 1-Trityl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 31250-99-4, Product Details of 31250-99-4

EXAMPLE 2 This Example illustrates the preparation of 1-trityl-1,2,4-triazole-5-carboxaldehyde. A solution of 1-trityl-1,2,4-triazole (62.2 g, prepared as described in Example 1) and N,N,N’,N’-tetramethylethylenediamine (23.2 g, 30 ml) in dry tetrahydrofuran (1 l) was cooled to -70 C. under nitrogen. n-Butyllithium (140 ml, 1.6M solution in hexane) was added dropwise, with stirring, at such a rate that the internal temperature was maintained below -60 C. The dark red solution was stirred at -70 C. for at least thirty minutes, treated dropwise with N,N-dimethylformamide (25 ml), allowed to warm to -30 C., then quenched with water (500 ml). The mixture was extracted with ethyl acetate (500 ml), containing a little dichloromethane if any solid precipitated. The extracts were washed with water (6*500 ml), dried over magnesium sulphate, evaporated under reduced pressure and the crude product triturated with ether-hexane (1:1, 150 ml) to give the title compound (60 g, m.p. 134-136 C.). This can be contaminated with 1,2,4-triazole itself, but subsequent stages are not adversly affected and the impurity can be removed at a later stage. NMR (CDCl3): delta7.1-7.4 (15H,m), 8.1(1H,s), 9.15(1H,s).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8, SDS of cas: 41253-21-8

First, 1H-1,2,4-triazole sodium salt (13.1 mmol) was dissolved in NMP (7 ml) and an internal temperature of thus obtained mixture was raised to 115C. Into this mixture, Compound IX-1 (8.76 mmol) was added and the mixture was washed with NMP (1.8 ml). Then, after the internal temperature rises back to 115C, sodium t-butoxide (5.26 mmol) and trimethylsulfoxonium bromide (1.476 mmol) were added in parts over approximately 3 hours. After addition of these sodium t-butoxide and trimethylsulfoxonium bromide had completed, stirring was carried out for 75 minutes at the internal temperature of 115C. Subsequently, after thus obtained reaction solution was cooled down to 35C, water was added to the reaction solution. Then, extraction with ethyl acetate was carried out. Further, an organic layer was washed with water and saturated brine, and dried with anhydrous sodium sulfate. Subsequently, a solvent was distilled away. Thereafter, by purification of a resultant residue by silica gel column chromatography, a target substance was obtained. [0291] Yield: 71%

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Sodium 1,2,4-triazol-1-ide, and friends who are interested can also refer to it.

Reference:
Patent; Kureha Corporation; TATEISHI, Hideaki; ARAKI, Nobuyuki; YAMAZAKI, Toru; MIYAKE, Taiji; SUDO, Keiichi; KANNO, Hisashi; EP2719281; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows. Recommanded Product: 1H-1,2,3-Triazole

In the reactor,Add 250mL of acetone,Stirring,26.2 g of 2-iodo-5-methylbenzoic acid,Then 34.5 g of potassium carbonate was added,0.38 g copper iodide (Cul),1,2,3-triazole 7.6g.External temperature was raised to 70 C,During the heating process, a large amount of gas is generated,The reaction was refluxed for 5 hours.Then the reaction mixture was distilled under reduced pressure, the reaction system is more viscous, add 30mL of water, continue to reduce the steam distillation to no acetone (no acetone gas phase). 300mL of water was added to the residue after distillation, and 6mo 1 / L hydrochloric acid was added dropwise at room temperature to adjust the pH of the system to 1-2, resulting in a khaki-colored suspension liquid. Stirred for 15 minutes, filtered, washed with water three times,Each 50mL. The resulting solid was dried at 70 C in vacuo to dryness,Have pale green solid 19.45g,For crude compound (1-1), the purity was 95.20%.With stirring, 7.5 kg of acetone, 0.94 kg of crude compound (1-1) and 0.194 kg of sodium hydroxide were added to the reaction kettle. Stirred at 20 C-30 C for 14 hours. Centrifugation, The filter cake was washed 3 times with acetone, each time 3kg. The resulting solid was transferred to the reaction kettle , 5.65 kg of water was added, 0.14 kg of diatomaceous earth was added and stirred for 1 hour. Filtration, the filtrate was transferred to the reaction kettle, hydrochloric acid was added dropwise to adjust the pH to 1-2, a large amount of white solid formed and stirred for 1 hour. Filtered, the filter cake was washed with water three times, each time 3kg. The resulting solid was dried at 60 C in vacuo to dryness, 0.71 kg white solid, represents Compound (I-1), purity 99.97%, Isomeric compound (1-2) less than 0.1%.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Fan Yuping; (6 pag.)CN104649983; (2018); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 64922-04-9, name is Ethyl 1H-1,2,4-triazole-5-carboxylate, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 64922-04-9, Formula: C5H7N3O2

(C-67) To a suspension of 1H-[1,2,4]triazole-3-carboxylate ethyl ester(Farmako, 1997, 52, p429)(1.0 g, 7.09 mmol)in ethanol(25 ml), were added 20% sodium ethoxide ethanol solution 3.3 ml and 4-fluorobenzylbromide(0.93 ml, 7.46 mmol) under ice-cooling and the mixture was stirred for 1.5 hour, Further, the mixture was stirred at room temperature for 30 minutes and at 80C for 40 minutes.. After cooling, water was added to the solution and the mixture was extracted with ethyl acetate.. The extract was washed with saturated brine and dried, then the solvent was evaporated under reduced pressure.. The residue was purified with silica gel column chromatography(ethyl acetate:n-hexane=1:1-1:3)to give 1-(4-fluorobenzyl)-1H-[1,2,4]triazole-3-carboxylate ethyl ester(754 mg, yield:42%). NNR(CDCl3)delta: 1.44(3H, t, J=7.2Hz), 4.48(2H, t, J=7.2Hz), 5.39(2H, s), 7.00-7.13(2H, m), 7.25-7.34(2H, m), 8.08(1H, s).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; SHIONOGI & CO., LTD.; EP1422218; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 27996-86-7

Example 94: Preparation of l-(4-Vinylphenyl)-lH-l,2,4-triazole (DI59) To a stirred solution of 4-[l,2,4]triazol-l-yl-benzaldehyde (9.0 g, 52 mmol) in 1,4- dioxane (100 rriL), were added K2CO3 (10.76 g, 78 mmol) and methyl triphenyl phosphonium bromide (22.2 g, 62.4 mmol) at room temperature. The resultant reaction mixture was heated to 70 C for 18 h. After completion of the reaction (TLC), the reaction mixture was cooled to room temperature and filtered and the obtained filtrate was concentrated under reduced pressure. Purification by flash chromatography (Si02, 100-200 mesh; 25-30% EtOAc in petroleum ether) to afforded the title compound as a white solid (5.6 g, 63%): ESIMS m/z 172.09 ([M+H]+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 27996-86-7, its application will become more common.

Reference:
Patent; DOW AGROSCIENCES LLC; LO, William C.; HUNTER, James E.; WATSON, Gerald B.; PATNY, Akshay; IYER, Pravin S.; BORUWA, Joshodeep; WO2014/100163; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, These common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 212.1 : To a solution of 3-methyl-1H-1,2,4-triazole (1 g) in MeCN (40ml) was added Cs2CO3 (3.72g) followed by benzyl bromoacetate (1.89ml_). The reaction mixture was stirred at RT for 1 h and evaporated to dryness. The residue was taken up in EA and washed with water, sat. NH4Cl and brine. The aq. layers were extracted with EA, the combined org. layers were dried (MgSO4), filtered off and evaporated in vacuo. The residue was purified by CC (Biotage, SNAP 100g cartridge, solvent A: DCM; solvent B: DCM/MeOH 8/2; gradient in %B: 15 for 12CV, 15 to 25 over 2CV, 25 for 3CV) to afford 2.23g of oil. The oil was purified by preparative chiral HPLC (II) to afford the two regioisomers, both as mixture of benzyl and ethyl ester that formed during the evaporation of the fractions after HPLC purification. The second eluting compound also contains the methyl ester analog due to the addition of MeOH to the fractions before evaporation. First eluting compound: (5-Methyl-[1,2,4]triazol-1-yl)-acetic acid benzyl ester (1.07g, brown oil, contains 16% of the ethyl ester analog). LC-MS (B): tR = 0.68min; [M+H]+: 232.16. 1H-NMR (CDCl3): 7.83 (s, 1 H); 7.40-7.33 (m, 5H); 5.23 (s, 2H); 4.93 (s, 2H); 2.43 (s, 3H). Roesy signal seen between CH2 at 4.93 ppm and CH3 at 2.43 ppm. Second eluting compound: (3-Methyl-[1,2,4]triazol-1-yl)-acetic acid benzyl ester (1.15g, yellow oil, contains 30% of the ethyl ester and 20% of the methyl ester analogs). LC-MS (B): tR = 0.67min; [M+H]+: 232.16. 1H-NMR (CDCl3): 8.05 (s, 1 H); 7.40-7.30 (m, 5H); 5.23 (s, 0.95H, CH2 of benzyl ester); 4.93-4.88 (3s, 2H); 4.27 (q, 0.58H, CH2 of ethyl ester); 3.81 (s, 0.65 H, CH3 of methyl ester); 2.42 (s, 3H). Roesy signal seen between CH at 8.05ppm and CH2 at 4.93-4.88ppm.

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; CAROFF, Eva; KELLER, Marcel; KIMMERLIN, Thierry; MEYER, Emmanuel; WO2013/114332; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, A new synthetic method of this compound is introduced below., Recommanded Product: 41253-21-8

Example 121; 4-[[2-(1 H-Lambda ,2,4-TriazoM -yl)ethyl](2,2,2-trif luoroethyl)amino]-2- (trifluoromethyl)benzonitrile; A mixture of 2-[[4-cyano-3-(trifluoromethyl)phenyl](2,2,2-trifluoroethyl)amino]ethyl methanesulfonate, Example 15C (0.050 g, 0.128 mmol) and 1 ,2,4-triazole sodium salt (0.023 g, 0.256 mmol) in DMF (2 ml_) was heated at 6O0C under N2 for 45 min. Upon cooling, the mixture was partitioned between Et2O and water. The organic phase was washed with water and the combined aqueous phases were extracted twice with Et2O. The combined organic phases were washed with brine, dried (Na2SO4), and concentrated in vacuo. The residue was purified by silica gel chromatography (5-80% EtOAc/hexanes gradient followed by 1-10% MeOH/EtOAc gradient) and the product was crystallized from CH2CI2/hexanes to give the title compound as a white solid (0.038 mg, 83% yield): MS (ES) m/z 364 (M+1 ).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2006/44707; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, These common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of (E)-3-(4-chloro-2-((5-methyl-2 H-tetrazol-2-yl)methyl)phenyl)- 1 -(4-(pi peridi n-4- yl)piperazin-i-yl)prop-2-en-i-one, dihydrochloride salt (Example 149, step 2)(130 mg, 0.259 mmol), DIPEA (0.316 ml, 1.810 mmol) and 1H-i ,2,3-triazole-4-carboxylic acid (38.0 mg, 0.336 mmol) in DMF (1.5 ml) was added T3P, 50% solution in EtOAc (0.302 ml, 0.517mmol). The resultant mixture was stirred at room temperature over the weekend. Water (0.5 ml) was added and the solvent removed in vacuo. The residue was purified by reverse phase preparative HPLC to afford the title compound as the trifluoroacetate salt;LC-MS: Rt 0.87 mins; MS mlz 525.3 (M+H)+; Method 2minLowpHvo2

Statistics shows that 1H-[1,2,3]Triazole-4-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 16681-70-2.

Reference:
Patent; NOVARTIS AG; BEATTIE, David; BAETTIG, Urs; LEGRAND, Darren Mark; LISTER, Andrew Stuart; MCKENNA, Jeffrey; PEARCE, David William; SANDHAM, David Andrew; STEWARD, Oliver Ross; THOMSON, Christopher; WO2015/8230; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics