Triazoles

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Quality Control of 3-Methyl-1H-1,2,4-triazole

To a mixture of 3-methyl- lH- l,2,4-triazole (330 mg, 3.97 mmol), 5-chloro-2-fluoro- benzaldehyde (425 mg, 2.68 mmol) in DMSO (5.0 mL) is added K2C03 (725 mg, 5.25 mmol). The reaction mixture is stirred at 100 C for 2 hours. The reaction mixture is allowed to cool to room temperature, diluted with CH2C12 (100 mL), and washed with H20 (75 mL x2). The organic layer is dried with Na2S04 and filtered. The filtrate is concentrated under reduced pressure and the residue is purified by silica gel flash column chromatography with 5% MeOH in EtOAc as the eluent to afford an impure mixture of 5-chloro-2-(3-methyl- l,2,4-triazol-l-yl)-benzaldehyde plus regiosiomer (270 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; CHEN, Zhidong; HAO, Ming-Hong; LIU, Weimin; LO, Ho-Yin; LOKE, Pui Leng; MAN, Chuk, Chui; MORWICK, Tina, Marie; NEMOTO, Peter, Allen; TAKAHASHI, Hidenori; TYE, Heather; WU, Lifen; WO2011/68821; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16681-70-2 as follows.

[0427] To a stirred solution of (2S,4S)-4-amino-5-bipheny1-4-y 1-2-(3 -hydroxypropoxymethy l)pentanoic acid ethy Iester (18 mg, 47 flillOI) in DMF (0.3 mL), was added IH-1,2,3-triazole-4-carboxylic acid (5.3 mg, 47 f.tmol) and HATU (18mg, 47 f.tmol), followed by DIPEA(25 f.LL, 141 f.tmol). Themixture was stirred for 30 minutes, then concentrated underreduced pressure to yield crude Compound I, which was usedin the next step without purification.

According to the analysis of related databases, 16681-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Application In Synthesis of 1H-1,2,3-Triazole

Intermediate 14f (0556) 4,5-Dibromo-lH-triazole (0557) Br2 (930 g, 5.82 mol) was added dropwise to a stirred solution of lH-triazole (300.00 g, 4.34 mol, 252.10 mL) in H20 (2 L) at 40 to 45 C. The resulting solution was stirred for a further 1 hour. The precipitate was filtered off and further Br2 (617.28 g, 3.86 mol) was added to the filtrate, then it was kept at 25 C for 16 hours. A second precipitate was filtered off. The combined filtered off solids were washed with water (1 L x 3), dried under vacuum and re-crystallized from MeOH (-400 mL) to give 4,5-dibromo-lH-triazole (Intermediate 14f; 890 g, 90.39% yield) as an off-white solid, m/z (ES+) [M+H]+ (0558) 226/228/230.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ASTRAZENECA AB; WARD, Richard, Andrew; JONES, Clifford, David; FERON, James, Lyman; (80 pag.)WO2017/80980; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 103755-58-4, These common heterocyclic compound, 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Phosphorus(III) bromide, 9.7 mL (0.05 mol), was added with vigorous stirring to a solution of 8.75 g (0.05 mol) of (1-phenyl-1H-1,2,3-triazol-4-yl)metha-nol (11) in 200 mL of anhydrous benzene. The mixture was heated for 2 h and cooled, 50 g of crushed ice was added, and the mixture was neutralized with a saturat-ed solution of sodium carbonate. The organic layer was separated and washed with a saturated solution of sodium carbonate, and the solvent was evaporated under reduced pressure. Yield 10.0 g (84%), mp 124-126C. 1 H NMR spectrum (500 MHz, DMSO-d 6 ), delta, ppm: 4.84 s (2H, CH 2 ), 7.52 t (1H, p-H, J = 7.2 Hz), 7.62 t (2H, m-H, J = 7.2 Hz), 8.92 s (1H, 5-H), 7.91 d (2H o-H, J = 7.2 Hz). Mass spectrum, m/z (I rel , %): 238 (100), 240 (97) [M + H] + . Found, %: C 45.23; H 3.30; N 17.62. C 9 H 8 BrN 3 . Calculated, %: C 45.40; H 3.39; N 17.65.

Statistics shows that (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol is playing an increasingly important role. we look forward to future research findings about 103755-58-4.

Reference:
Article; Pokhodylo; Tupychak; Shyyka, O. Ya.; Obushak; Russian Journal of Organic Chemistry; vol. 55; 9; (2019); p. 1310 – 1321; Zh. Org. Khim.; vol. 55; 9; (2019); p. 1393 – 1405,13;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%). :_Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, HPLC of Formula: C2H3N3

To a mixture of the product from step 2 (7.9 g, 38 mmol), Cs2C03 (24.8 g,76 mmol) and Cul (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[l,2,3]triazole (5.24 g,76 mmol) and N,N’-dimethyl-cyclohexane- 1,2-diamine (0.9 g, 6.5 mmol) and the mixture was stirred at 110 C overnight. The cooled mixture was adjusted to pH ~12 with 1M sodium hydroxide and extracted withEtOAc (50 mL x 3). The aqueous layer was adjusted to pH ~4 with 1M HC1 and extracted with EtOAc (50 mLx4). The extracts were dried over Na2S04, filtered, the filtrate concentrated in vacuo and the residue purified by chromatography on silica (Petroleum ether:EtOAc =10:1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; KUDUK, Scott D.; BESHORE, Douglas; LUO, Yunfu; MENG, Na; YU, Tingting; (114 pag.)WO2016/65585; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 1001401-62-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1001401-62-2 name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

10818] To 2-(2H-1,2,3-triazol-2-yl)benzoic acid (125 g, 0.6 mmol) and DMF (4 mE) was added (i-Pr)2NEt (0.23 mE, 1.3 mmol) and HBTU (155 g, 0.6 mmol). Afier 10 mm, the title compound from step B (146 g, 0.4 mmol) was added. After stirring overnight at it, saturated NaHCO3 (aq.) was added and the mixture extracted with EtOAc (3x). The combined organics were dried (Mg504) and concentrated. Purification via preparative HPEC gave the title compound (89 mg, 47%) as a beige solid. MS (ESI) mass calcd. for C2QH18F3N70, 429.2; mlz found 430 [M+H]. 1H NMR (DMSO-D5): 8.47 (s, 0.3H), 8.24 (s, 0.7H), 8.14-8.05 (m, 2.2H), 8.02 (s, 0.7H), 7.85 (d, J=7.2 Hz, 1.3H), 7.72-7.55 (m, 1.7H), 7.49-7.34 (m, 1.4H), 7.13 (t, J=7.4 Hz, 0.7H), 4.58 (t, J4.3 Hz, 0.7H), 4.44 (d, J=4.7 Hz, 0.3H), 4.04-3.93 (m, 0.3H), 3.82 (t, J=4.1 Hz, 0.3H), 3.79-3.70 (m, 0.7H), 3.54 (d, J4.8 Hz, 0.7H), 2.07-1.90 (m, 1H), 1.85-1.07 (m, 5H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, and friends who are interested can also refer to it.

Reference:
Patent; Janssen Pharmaceutica NV; COATE, Heather R.; DVORAK, Curt A.; FITZGERALD, Anne E.; LEBOLD, Terry P.; PREVILLE, Cathy; SHIREMAN, Brock T.; (473 pag.)US2016/46640; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2, These common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of ( R,4R^-4-Amino-5-biphenyl-4-yl-2-hydroxypentanoic acid ethyl ester (200 mg, 638 muiotaetaomicron), HATU (291 mg, 766 muiotaetaomicron), 3H-[l,2,3]triazole-4- carboxylic acid (87 mg, 766 muiotaetaomicron), and DMF (3 mL), was added DIPEA (357 mu, 2.0 mmol), and the mixture was stirred at room temperature for 30 minutes. A saturated aqueous NH4C1 was added and the mixture was extracted with EtOAc. The organics were combined, dried over a2S04, and the solvent was evaporated. The crude residue was purified by normal phase chromatography (0-100% EtOAc/hexanes) to yield Compound 1 (76 mg).

Statistics shows that 1H-[1,2,3]Triazole-4-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 16681-70-2.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 1H-1,2,3-Triazole

A solution of 2-bromo-3-thiophene carboxylic acid (1.50 g, 7.24 mmol), 1H-1,2,3-triazole (0.600 g, 8.69 mmol), potassium carbonate (2.00 g, 14.5 mmol), and copper iodide (0.138 g, 0.724 mmol) in DMF (36.2 mL) was sparged with nitrogen and heated to 75C for 96 h. The cooled reaction mixture was diluted with water, washed with ether, and acidified with cone. HCl. The acidic aqueous solution was extracted 3x with EtOAc and the combined organic fractions washed with brine, dried over MgS04, filtered, and concentrated in vacuo. The crude material was purified by silica gel chromatography [0-70% (1% acetic acid in EtOAc) in hexanes], to provide the title compound as an off-white solid. LRMS m z (M+H) 196.2 found, 196.1 required.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas C.; KUDUK, Scott D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/18027; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4320-91-6,Some common heterocyclic compound, 4320-91-6, name is 2H-1,2,3-Triazole-2-acetic acid, molecular formula is C4H5N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Oxalyl chloride (0. 95 mL, 11 mmol) was added dropwise to a suspension OF 2- (1-1, 2, 3-triazolyl)) acetic acid (Step B, 1.27 g, 10 mmol) in 10 ML CH2C12 containing 0.05 ML DMF. Vigorous effervescence was observed. This mixture was stirred at room temperature for 4 h and cooled TO-78C. A solution OF N. O- dimethylhydroxylamine hydrochloride (1.2 g, 13 mmol) and diisopropylethyl amine (6.0 mL, 35 mmol) in 10 ML CH2CL2 was added slowly over 3 min. The mixture was then allowed to warm to room temperature and stirred overnight. The reaction mixture was then diluted with ether until no additional precipitate appeared. The solid was filtered and washed with ether. The filtrate was concentrated and the residue was purified on silica gel using EtOAc as solvent to provide the title compound as amorphous solid. 1H NMR (400 MHz, CDC13) : S 3.252 (s, 3H0, 3.812 (s, 3H), 5.379 (s, 2H), 7.753 & 7.761 (s’s, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2H-1,2,3-Triazole-2-acetic acid, its application will become more common.

Reference:
Patent; MERCK & CO., INC.; WO2005/27837; (2005); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics