Triazoles

Reference of 4922-98-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4922-98-9 as follows.

General procedure: Solution A. A solution of KOH (0.56 g, 0.01 mol) and potassium salt of ethyl nitrocyanoacetate (1.96 g, 0.01 mol) in2 (8 ml) was stirred at room temperature for 3 h, then kept overnight. 4 M aqueous KOAc (8 ml, 0.03 mol) was added to the resulting solution, and the mixture cooled to 5¡ã. A mixture of 3-aminoazole 1a?i (0.010 mol), EtOH (10 ml),H2O (10 ml), and concentrated HCl (2.5 ml, 0.030 mol)was treated with a solution of NaNO2 (0.759 g, 0.011 mol)in H2O (3 ml) at ?5 ¡ã. The reaction mixture was kept at this temperature for 10 min, then added to the solution A. The mixture was kept at room temperature for 1 h; the formed precipitate was filtered, stirred with 40percent aqueous H2SO4 (10 ml) (AcOH (10 ml) was used for compound 4e), filtered, and dried. The obtained hydrazone 3a?i was heated under reflux in DMF for 3 h. The solvent was evaporated, the residue triturated in water, filtered, and dried.

According to the analysis of related databases, 4922-98-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Voinkov, Egor K.; Ulomskiy, Eugeny N.; Rusinov, Vladimir L.; Chupakhin, Oleg N.; Gorbunov, Evgeny B.; Drokin, Roman A.; Fedotov, Victor V.; Chemistry of Heterocyclic Compounds; vol. 51; 11-12; (2015); p. 1057 – 1060; Khim. Geterotsikl. Soedin.; vol. 51; 11-12; (2015); p. 1057 – 1060,4;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7411-23-6,Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Dibromo-1H-1,2,4-triazole, its application will become more common.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

B. (2S,4S)-5-Biphenyl-4-yl-2-hydroxymethyl-4-[(3H-[1,2,3]-triazole-4-carbonyl)-amino]-pentanoic acid (R7=H) 1,2,3-Triazole-4-carboxylic acid (87.3 mg, 772 mumol, 1.5 eq.) was combined with HATU (293 mg, 772 mumol, 1.5 eq.) and DIPEA (179 muL, 2.0 eq.) and stirred for 5 minutes at room temperature in DCM (3 mL) to yield the activated acid. (2S,4S)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-pentanoic acid ethyl ester (220 mg, 514 mumol, 1.0 eq.) was combined with DCM and TFA (1 mL each), and stirred at room temperature for 1 hour. The mixture was evaporated and azeotroped with toluene (2*). The activated acid was added and the resulting mixture was stirred for 2 hours. The reaction was quenched with water and extracted with DCM. The layers were separated, and the organic layer was dried and evaporated. Two-thirds of the product was purified by preparative HPLC to yield compound A (R7=-CH2CH3) (60 mg, 98% purity), MS m/z [M+H]+ calc’d for C23H26N4O4, 423.40. found 423.2. One-third of the product was hydrolyzed by adding 1 M of NaOH in water (619 muL) in THF (1 mL). The mixture was stirred at room temperature for 1 hour. The solvent was evaporated and the resulting material purified by preparative HPLC to yield compound B (R7=H) (35 mg, 99% purity), MS m/z [M+H]+ calc’d for C21H22N4O4, 395.16. found 395.2.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-[1,2,3]Triazole-4-carboxylic acid, its application will become more common.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16681-70-2 as follows. Recommanded Product: 1H-[1,2,3]Triazole-4-carboxylic acid

1,2,3-Triazole-4-carboxylic acid (14 mg, 124 mumol), DIPEA (86.3 muL, 496 mumol) and HATU (47.1 mg, 124 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid butyryloxymethyl ester (51 mg, 120 mumol). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product purified by preparative HPLC and lyophilized to yield the title compound (1 mg; purity 95%). MS m/z [M+H]+ calc’d for C27H32N4O6, 509.23. found 509.4.

According to the analysis of related databases, 16681-70-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2H4N4

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

The synthetic route of 61-82-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF (1.0 mL) was treated with 1,2,3-triazole (1.5 g, 21.7 mmol), copper(I) iodide (0.25 g, 1.2 mmol), Cs2CO3 (7.08 g, 21.7 mmol), and trans-N,N?-dimethylcyclohexane-l ,2-diamine (0.31 g, 2.17 mmol). The mixture was heated at 120 CC for 12h. The reaction was cooled to ii, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on Si02 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the title compound.?HNMR (500 MHz, DMSO-d6) 3 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. LRMS m/z (M+H) 190.2 found, 190.2.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (97 pag.)WO2016/100157; (2016); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 81606-79-3, Formula: C4H4N4

General procedure: Using the procedure in Example 8, and starting with (2S,3R)-N-((S)-l-((2-fluoro-4- methylbenzyl)amino)-3-(3-formylphenoxy)-l-oxopropan-2-yl)-3-hydroxy-2-pivalamido- butanamide, the title compound was obtained. LC-MS (ES, m/z): 605.5 [M+H].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BRAMELD Kenneth; OWENS Timothy; WO2015/195950; A1; (2015);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, category: Triazoles

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Methyl-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, molecular formula is C3H4ClN3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one

Step 1(e): 3-chloro-5-({2-oxo-1-[(5-oxo-4,5-dihydro-1H-1,2,4-triazol-3-yl)methyl]-4-(trifluoromethyl)-1,2-dihydropyridin-3-yl}oxy)benzonitrile (1-6) A suspension of the 3-chloro-5-{[2-hydroxy-4-(trifluoromethyl)pyridin-3-yl]oxy}benzonitrile (1-4; 2.00 g; 6.36 mmol), 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (1-5; 0.849 g; 6.36 mmol) and K2CO3 (0.878 g; 6.36 mmol) in DMF (32 mL) was stirred for 2 hours at room temperature, at which point LCMS analysis indicated complete conversion. The mixture was diluted with 200 mL Me-THF and washed with 150 mL 1:1:1 H2O:brine:saturated aqueous NH4Cl, then further washed with 2.x.150 mL 1:1 H2O:brine. The aqueous fractions were further extracted with 150 mL Me-THF, then the combined organic extracts were dried (Na2SO4) and concentrated in vacuo. Purification by ISCO CombiFlash (80 g column; dry load; 100:0 to 90:10 EtOAc:EtOH over 25 minutes) provided the title compound (1-6) as a white solid. 1HNMR (400 MHz, DMSO): delta 11.46 (s, 1 H); 11.39 (s, 1 H); 7.93 (d, J=7.3 Hz, 1 H); 7.76 (s, 1 H); 7.58 (s, 1 H); 7.51 (s, 1 H); 6.67 (d, J=7.3 Hz, 1 H); 5.02 (s, 2 H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 252742-72-6, its application will become more common.

Reference:
Patent; Burch, Jason; Cote, Bernard; Nguyen, Natalie; Li, Chun Sing; St-Onge, Miguel; Gauvreau, Danny; US2011/245296; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, A new synthetic method of this compound is introduced below., Recommanded Product: 4928-87-4

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and 2-(4- methoxyphenyl)ethanamine (0.31 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3-Dimethylaminopropyl)-N’- ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using MeOH and DCM (6:94) as eluents to get the desired amide 21 (193 mg, 39 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.76-14.35 (br s, 1H), 8.80-8.30 (m, 2H), 7.15 (d, J= 8.8 Hz, 2H), 6.85 (d, J= 8.8 Hz, 2H), 3.72 (s, 3H), 3.48-3.40 (m, 2H), 2.78 (t, J= 7.6 Hz, 2H) ppm. MH+ = 247.1 m/z. The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics