Triazoles

Reference of 288-88-0,Some common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Weigh 0.691 g (10 mmol) of 1,2,4-triazole,Para-fluorobenzaldehyde 1.240 g (10 mmol) and anhydrous potassium carbonate 2.760 g (20 mmol) were weighed out,Was dissolved in 25 mL of N, N-dimethylformamide,Add to a thermometer,In a 50 mL four-necked flask equipped with a stirrer,80 under the reaction after 10h stop heating,Filtered to remove potassium carbonate,Ethyl acetate extraction,After the solvent was removed by rotary evaporation,An off-white solid,Recrystallized three times with ethanol,Get pure,Drying at 50 C in vacuo for 6h gave 4- (1-1,2,4-triazolyl) benzaldehyde.

The synthetic route of 288-88-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zibo Vocational Institute; Zhang Ye; Liu Hongming; (14 pag.)CN104119286; (2017); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 815588-93-3,Some common heterocyclic compound, 815588-93-3, name is 1-Methyl-1H-1,2,4-triazole-5-carboxylic acid, molecular formula is C4H5N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[00160] To a stirring solution of 7 (300 mg, 0.97 mmol) in DCM (30 mL) were added N, iV-diisopropylethyl amine (0.44 mL, 2.42 mmol), Int-J (147 mg, 1.16 mmol), followed by HATU (442 mg, 1.10 mmol) at 0 ¡ãC and stirred at RT for 16 h. After consumption of the starting material (by TLC), the reaction mixture was concentrated under reduced pressure to give crude product, which was purified by column chromatography by 4percent MeOH/DCM toafford yellow syrup which was further purified by preparative HPLC to afford Compound F (80 mg, 19.7percent) as colorless thick syrup. H-NMR: (400 MHz, DMSO-i): delta 9.15 (s, 1H), 8.52 (t, J= 8.0 Hz, 1H), 8.08 (s, 1H), 5.19- 5.16 (m, 1H), 4.04 (s, 2H), 4.02 (s, 3H), 3.94-3.84 (m, 5H), 3.44-3.41 (m, 1H), 2.27-2.21 (m, 2H), 1.93-1.85 (m, 2H), 1.10-1.08 (m, 3H) LCMS m/z: 419 [M++l] HPLC: 96.64percent

The synthetic route of 815588-93-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NAUREX, INC.; LOWE, John, A.; KHAN, M., Amin; WO2014/120800; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 27808-16-8, name: 4-Methyl-1H-1,2,3-triazole

[0009071 To a stirred solution of compound 6 (0.4mL, 1 eq) in dry DMF (3 mL), NaH (0.211 g, 1.5 eq) was added at 0 C and stirred for 15 mm followed by the addition of compoundS (0.380 g, 1.1 eq). The reaction mixture was stirred at room temperature for 30 mm. The progress of the reaction was monitored by TLC. After completion of the reaction, the reaction mixture was quenched with water and extracted with ethyl acetate (3 X 50 mL). Combined organic extracts were washed with brine, dried over anhydrous sodium sulfate and evaporated under reduced pressure. The crude product was purified by column chromatography on silica gel 100-200 mesh using 0-5% EtOAc-hexane to afford the title compound. LCMS (mlz): 205 (M + 1).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Methyl-1H-1,2,3-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BIOMARIN PHARMACEUTICAL INC.; BHAGWAT, Shripad; WANG, Bing; LUEDTKE, Gregory R.; SPYVEE, Mark; (490 pag.)WO2016/57834; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, A new synthetic method of this compound is introduced below., Product Details of 4922-98-9

General procedure: 4.1.1.1. General procedure. An equimolar mixture of compound 3, 7a-c and N-(4-acetylphenyl)-2-bromoacetamide 9 (0.25 g,1 mmol) in acetonitrile (50 ml) and TEA (0.10 g, 1.2 mmol) was heated at reflux for 4-8 h. The reaction mixture was evaporated to dryness. The residue was crystallized from aqueous ethanol affording products 10a-d.

The synthetic route of 4922-98-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; El-Sherief, Hany A.M.; Youssif, Bahaa G.M.; Abbas Bukhari, Syed Nasir; Abdelazeem, Ahmed H.; Abdel-Aziz, Mohamed; Abdel-Rahman, Hamdy M.; European Journal of Medicinal Chemistry; vol. 156; (2018); p. 774 – 789;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 1 ,2,3-trazole (10 g, 145 mmol) in 150 ml of THF were added potassium carbonate (40 g, 290 mmol) and MeI (13.58 ml, 217 mmol). The resulting reaction mixture was stirred at rt for 3hr. The reaction mixture was filtered and the filtrate was concentrated to afford the title compound (9.2 g, 78%). 1 H NMR (400 MHz, CDCI3) deltappm 7.71 (s, 1 H), 7.55 (s, 1 H), 4.14 (s, 3H).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2008/98104; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Intermediate A 2-(2H-l .2.3-Triazol-2-yl)benzoyl acid A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF (1.0 mL) was treated with 1,2,3-triazole (1.5 g, 21.7 mmol), copper(I) iodide (0.25 g, 1.2 mmol), Cs2C03 (7.08 g, 21.7 mmol), and fras-N,N’-dimethylcyclohexane-l ,2-diamine (0.31 g, 2.17 mmol). The mixture was heated at 120 C for 12h. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on Si02 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the title compound.1HNMR (500 MHz, DMSO-d6) delta 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. LRMS m/z (M+H) 190.2 found, 190.2.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C8H8N4

General procedure: 3-Amino-1,2,4-triazole 8a?f (1.0 mmol), o-hydroxybenzaldehyde9a?e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150¡ãC for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3¡Á1 ml), and dried. Compounds 1a?w were obtainedin a form of white solids.

The synthetic route of 5-Phenyl-1H-1,2,4-triazol-3-amine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5, These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The title compound was prepared according to the patent application WO2008/135826. To a 50 mL 2-necked flask containing 1-methyl-1H-1,2,3-triazole (1.0 g, 12.0 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (45 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 4.8 mL, 12.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -30 to -20 C. for 45 minutes, then neat DMF (3 mL, 38.5 mmol) was introduced at -10 C. The mixture was allowed to warm up to room temperature and stirred for 60 minutes, followed by pouring into water. The aqueous portion was extracted with EtOAc (4*50 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The aqueous portion was back-extracted with DCM (3*50 mL) and dried as above. The combined organics were concentrated to give a light brown oil that was much more UV active than the starting material. TLC in either 25% CH3CN-DCM or 25% EtOAc-DCM showed the product to have a slightly higher Rf than the starting material. Chromatography on silica gel (100% DCM increasing to 25% CH3CN-DCM) provided the title compound as a colorless oil.

Statistics shows that 1-Methyl-1H-1,2,3-triazole is playing an increasingly important role. we look forward to future research findings about 16681-65-5.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; US2015/105372; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 3641-13-2,Some common heterocyclic compound, 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

The synthetic route of 3641-13-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 252742-72-6,Some common heterocyclic compound, 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, molecular formula is C3H4ClN3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of benzyl[(2S,3S)-2-phenyl-3-piperidinyl]carbamate (100 mg) in a mixture of N,N- dimethylformamide (0.66 ml) and water (0.01 ml) were added potassium carbonate (27 mg) and 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (45 mg), and the whole was stirred at room temperature for 1 hour. The mixture was poured into cold water (30 ml) and stirred for 10 minutes. The resulting precipitates was collected by filtration, washed with water, and dried to give the title compound (108 mg) . MASS (ES+): 408 (M+H)+

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, its application will become more common.

Reference:
Patent; FUJISAWA PHARMACEUTICAL CO., LTD.; WO2004/111000; (2004); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics