Triazoles

Synthetic Route of 6818-99-1, These common heterocyclic compound, 6818-99-1, name is 3-Chloro-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under an atmosphere of argon, (2S,4R)-N-(1-cyanocyclopropyl)-4-(4-fluorophenylsulfonyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 33, step b, 0.3 g, 634 imol) was combined with N,Ndimethylacetamide (12 mL) to give a colorless suspension. 3-Chloro-1H-1,2,4-triazole (134 mg, 1.27 mmol) and cesium carbonate (413 mg, 1.27 mmol, Eq: 2) were added. The reaction mixture was stirred over the weekend at ambient temperature, and wassubsequently heated to 140C for 30 mm in a microwave oven. The reaction mixture was poured into water (50 mL) and extracted with ethyl acetate (2 x 50 mL). The crude material was purified by preparative HPLC to yield the title compound as a colorless viscous oil (93.9mg, 26.6 %). mlz = 557.09 [M+H?i.

The synthetic route of 6818-99-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C9H7N3O2

A solution of (3S,6R)-6-methylpiperidin-3-ol (2.36 g, 20.5 mmol), 2-(2H- 1,2,3- triazol-2-yl)benzoic acid (4.65 g, 24.6 mmol), EDC (7.86 g, 41.0 mmol), l-hydroxy-7- azabenzotriazole (5.58 g, 41.0 mmol), and triethylamine (8.57 mL, 61.5 mmol) in DMF (130 mL) was stirred at 50 C overnight, then diluted with saturated aqueous sodium bicarbonate and extracted 5x with ethyl acetate. The organics were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-100% ethyl acetate in hexanes), providing the titled compound as a peach- colored solid. LRMS m/z (Mu+Eta) 287.4 found, 287.1 required.

The synthetic route of 1001401-62-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/95108; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7411-23-6, These common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Triazole 1, 85.0 g (0.38 mol), was dissolved in 500 mL of ethyl acetate, 2-3 drops of trifluoroacetic acid were added, the mixture was heated to 50 C, and 75.0 g (0.87 mol) of 3,4-dihydro-2H-pyran was added over a period of 2.5 h. The mixture was refluxed for 1 h with stirring and evaporated, and the residue was recrystallized from toluene. Yield 111.5 g (95 %), mp 116-117 C [15]. IR spectrum, nu,cm-1: 2951, 2901, 2869, 2361, 1448, 1418, 1364, 1310,1289, 1240, 1204, 1184, 1082, 1055, 1042, 1001, 982,939, 912, 880, 847, 820, 793, 700, 563. 1H NMR spectrum,delta, ppm: 1.43-1.60 m (2H), 1.61-1.79 m (1H),1.84-2.04 m (2H), 2.04-2.20 m (1H), 3.54-3.76 m(1H), 3.91 d.d (1H, 3J = 3.2, 2J = 8.7 Hz), 5.54 d.d (1H, 3J = 2.5, 9.2 Hz). 13C NMR spectrum, deltaC, ppm: 21.7(CH2), 24.7 (CH2), 28.7 (CH2), 67.3 (CH2O), 84.6(OCH), 132.0 (C3), 140.0 (C5). Mass spectrum, m/z(Irel, %): 86 (5.8), 85 (100), 67 (10.8), 57 (11.1), 55 (8.4), 43 (8.9), 41 (18.9), 39 (6.5), 29 (17.8), 27 (8.7).

Statistics shows that 3,5-Dibromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7411-23-6.

Reference:
Article; Tolstyakov; Russian Journal of Organic Chemistry; vol. 54; 10; (2018); p. 1537 – 1547; Zh. Org. Khim.; vol. 54; 10; (2018); p. 1525 – 1534,10;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1455-77-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows.

4′-methoxy acetophenone was used in place of 2-acetylthiophene in Reference Example 001 and heated to reflux in xylene in the presence of N,N-dimethylformamide diethyl acetal as in Reference Example 001, and 3-dimethylamino-1-(4-methoxyphenyl)propenone (yield 99percent) was obtained, which was subsequently reacted with 3,5-diamino-1,2,4-triazole in toluene in the presence of 10-camphor sulfonic acid and the title compound was obtained (yield 61percent).

The chemical industry reduces the impact on the environment during synthesis 3,5-Diamino-1,2,4-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; NIPPON KAYAKU KABUSHIKI KAISHA; EP1674454; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8,Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2,4-difluorobenzonitrile (10 g, 72 mmol) dissolved in tetrahydrofuran (20 mL), and dimethylformamide (40 mL) was added 1,2,4-triazole sodium salt (6.3 g, 70 mmol) and the mixture stirred at 90 0C for 3 h after which the mixture was filtered and the solvent removed. The resulting residue was adsorbed onto silica gel and intermediates 67 and 68 separated by flash chromatography, eluting with 0% to 30% ethyl acetate/hexanes.Intermediate 674-Fluoro-2-(lH-l,2,4-triazol-l-yl)benzonitrile. Colorless needles (2.46 g,18% yield) 1H NMR (500 MHz, CDCl3) delta: 8.89 (IH, s), 8.19 (IH, s), 7.85 (IH, dd, J = 8.7, 5.6 Hz), 7.60 (IH, dd, J= 8.8, 2.4 Hz), 7.28-7.24 (IH, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13. Intermediate e 684-(lH-l,2,4-Triazol-l-yl)-2-fluorobenzonitrile. White solid (0.746 g, 6% yield) 1H NMR (500 MHz, CDCl3) delta: 8.66 (IH, s), 8.15 (IH, s), 7.79 (IH, dd, J= 8.5, 6.7 Hz), 7.69 (IH, dd, J= 9.5, 1.8 Hz), 7.65-7.63 (IH, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Sodium 1,2,4-triazol-1-ide, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/64316; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 74733-90-7, name is 2-(4-Bromophenyl)-2H-1,2,3-triazole, molecular formula is C8H6BrN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 74733-90-7

Potassium acetate (391 mg, 3.98 mmol) was added to a solution of 2-(4- Bromophenyl)-2H-1 ,2,3-triazole (1.0 equivalent), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bi- 1 ,3,2-dioxaborolane (1.20 equivalents), and [1 , 1 ‘-bis-(diphenylphosphino)ferrocene]- dichloropalladium (II) dcm complex (0.30 equivalents) in 1 ,4-dioxane in a vial. The vial was capped and heated to 80C and stirred at this temperature overnight. [1 ,T-bis- (diphenylphosphino)ferrocene]-dichloropalladium (II) dcm complex (0.30 equivalents) was added to the reaction and the mixture was reheated to 80C and stirring was continued at this temperature overnight. The reaction was cooled, diluted with ethyl acetate and water, filtered through celite and the filter pad was washed with ethyl acetate. The organic layer was separated, and the aqueous layer was extracted with ethyl acetate. The combined organics were dried (MgSCb), filtered, and concentrated. The crude was purified via flash chromatography using an Analogix SF15-24g column and ethyl acetate in heptane (30-80%) as the eluant to afford the title compound was converted to the title product. The title compound was obtained as an orange solid (240.6 mg, 78%) LC-MS m/z 272.4 (M+1 ) 1 H NMR (CDCb, 400 MHz) d ppm 1 .37 (s, 12 H) 7.83 (s, 2 H) 7.94 (d, J=8.59 Hz, 2 H) 8.10 (d, J=8.59 Hz, 2 H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 74733-90-7, its application will become more common.

Reference:
Patent; PFIZER INC.; BROWN, Matthew, Frank; CHE, Ye; MARFAT, Anthony; MELNICK, Michael, Joseph; MONTGOMERY, Justin, Ian; JOHNSON, Timothy, Allan; EWIN, Richard, Andrew; UCCELLO, Daniel; REILLEY, USA; BRAISH, Tamim, Fehme; (77 pag.)WO2019/178305; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 217448-86-7, These common heterocyclic compound, 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 8Synthesis of Compound (I)1-(2,6-Difluorobenzyl)-1H-1,2,3-triazole-4-carboxyamide (Rufinamide); Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate (II) (10.6 g, 41.9 mmoles), prepared as reported in Example 7, is dissolved in methanol (10 ml) and treated at room temperature under stirring with a 30% ammonia aqueous solution (40 ml), then the reaction mixture is refluxed and kept under stirring for 3 hours. The mixture is cooled to 20 C., then diluted with water, filtered, and the resulting white solid is washed with water and dried in a static dryer at 50 C. Rufinamide (8.7 g) is obtained as a crystalline white solid in 87% yield.1H NMR (400 MHz, DMSO-d6), delta ppm: 8.56 (s, 1H), 7.87 (bs, 1H), 7.60-7.43 (m, 2H), 7.20 (m, 2H), 5.72 (s, 2H).

Statistics shows that Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate is playing an increasingly important role. we look forward to future research findings about 217448-86-7.

Reference:
Patent; DIPHARMA FRANCIS S.R.L.; US2010/234616; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 15988-11-1, These common heterocyclic compound, 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of dimedone (1 mmol), aldehyde or isatin (1 mmol) and 4-phenylurazole (1 mmol), and catalyst (0.01 g, 5 mol%) in water (5 mL) was refluxed. After completion of the reaction that was monitored by TLC (EtOAc:n-hexane, 1:3), the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water and cooled with ethanol to afford the pure product.

The synthetic route of 15988-11-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Seyyedhamzeh, Mozhdeh; Shaabani, Shabnam; Hamidzad Sangachin, Mona; Shaabani, Ahmad; Research on Chemical Intermediates; vol. 42; 4; (2016); p. 2845 – 2855;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), Cs2CO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-5, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-5: 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,3-Triazole, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; COLEMAN, Paul, J.; SCHREIER, John, D.; WO2010/48014; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., SDS of cas: 16681-70-2

1,2,3-Triazole-4-carboxylic acid (0.0274 g, 0.242 mmol), DIPEA (169 muL, 969 mumol) and HATU (92 mg, 242 mumol) were combined in DMF (0.2 mL) and stirred for 5 minutes at room temperature. This was then combined with (2S,4R)-4-amino-5-biphenyl-4-yl-2-hydroxymethyl-2-methyl-pentanoic acid 2-piperidin-1-yl-ethyl ester (103 mg, 242 mumol), predissolved in DMF (0.2 mL) and DIPEA (0.5 eq.). The resulting mixture was stirred for 15 minutes and the reaction was quenched with AcOH. The product was purified by preparative HPLC and lyophilized to yield the title compound (40 mg; purity 95%). MS m/z [M+H]+ calc’d for C29H37N5O4, 520.28. found 520.4.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics