Triazoles

Some common heterocyclic compound, 31250-99-4, name is 1-Trityl-1H-1,2,4-triazole, molecular formula is C21H17N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C21H17N3

EXAMPLE 4 This Example illustrates the preparation of 1-trityl-5-iodo-1,2,4-triazole. A stirred solution of 1-trityl-1,2,4-triazole (9.95 g, prepared as described in Example 1) and N,N,N’,N’-tetramethylethylenediamine (3.71 g) in dry tetrahydrofuran (200 ml) was cooled to -70 C. under nitrogen and treated dropwise with n-butyllithium (22.0 ml, 1.6M solution in hexane). The solution was stirred for ten minutes, then treated rapidly with a solution of iodine (10.0 g) in dry tetrahydrofuran (40 ml). After a further one minute, the mixture was quenched at -50 C. with 0.1M sodium thiosulphate (100 ml) and portioned between dichloromethane and water. The organic layer was washed with water, dried over magnesium sulphate, evaporated under reduced pressure and the residue chromatographed on silica, using dichloromethane-ether (25:2) as eluant to give the title compound (11.73 g, m.p. 248-250 C.). NMR (CDCl3): delta7.1-7.3 (15H,m), 8.0(1H,s). 13 C NMR confirmed position of substitution. M/S: M+ 437

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 31250-99-4, its application will become more common.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7170-01-6,Some common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2- [6-Chloro-3- (ethanesulfonyl) pyridin-2-yl] -3-methyl-6- (trifluoromethyl)-3H-imidazo [4,5-b] pyridine 500 mg, 60% sodium hydride (oil) 60 mg, and the mixture DMF2.5mL, under ice-cooling 3-methyl-1H-1,2,4-triazole (synthesized by the method described in U.S. Patent application Publication 2006/0293304 Pat.) 113mg was added. After the mixture was stirred under ice-cooling for 2.5 hours, a saturated aqueous solution layer was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The organic layer was washed with water, and saturated brine, and dried with anhydrous sodium sulfate. The resulting organic layer was dried under reduced pressure. The resulting residue was subjected to silica gel chromatography to obtain 153mg of the compound of the present invention beta4 referred to below.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Methyl-1H-1,2,4-triazole, its application will become more common.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; NAKAJIMA, YUJI; OKAWARA, YUICHI; (263 pag.)JP2016/102104; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 3: 4-(2H-1.2.3-Triazol-2-yl)thiophene-3-carboxylic acid (Intermediate F) To a mixture of the product from step 2 (7.9 g, 38 mmol), cesium carbonate (24.8 g,76 mmol) and Cul (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[l,2,3]triazole (5.24 g,76 mmol) and N,N’-dimethyl-cyclohexane-l,2-diamine (0.9 g, 6.5 mmol) and the mixture was heated to 110 C overnight. The cooled reaction mixture was adjusted to ~pH=12 with 1M sodium hydroxide aqueous solution and extracted with EtOAc (50 mL x 3). The aqueous layer was adjusted to ~pH=4 with 1M HC1 aqueous solution and extracted with EtOAc (50 mLx4). The extracts was dried over Na2SC>4, filtered. The filtrate was concentrated in vacuo and the residue was purified by chromatography on silica (petroleum ether : EtOAc =10: 1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 584-13-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 584-13-4 as follows.

The ligand 4-(1H-imidazol-5-ylmethylene-amino)-4H-1,2,4-triazole (5-imztrz) (Fig. 1) was prepared by the condensation reaction of a modified literature procedure [21]. The dissolved 4-amino-1,2,4-triazole (1.68 g, 0.02 mol, 1.0 eq.) in ethanol was heated to boiling (80 C). Then, the second reactant 1H-imidazole-4-carbaldehyde (2.11 g, 0.022 mol, 1.1 eq.) dissolved in ethanol was added dropwise though a dropping funnel. After the complete addition few drops of catalytic H2SO4 were added. The reaction mixture was kept for refluxing for another 10 h. After cooling down to r.t., the excess of solvent was removed by rotary evaporator at 35 C. The obtained product was washed with small amounts of cold ethanol, diethyl ether and then dried in the desiccator with phosphorus pentoxide as dry agent. A light-yellow powder was obtained. Yield: 2.98 g (91.89%). m.p. 253.5-265.7 C. IR (KBr, cm1): 3109 (s),2838 (w), 1625 (vs), 1504 (vs), 1434 (s), 1386 (s), 1299 (s), 1214 (w),1175 (vs), 1060 (vs), 995 (s), 945 (w), 853 (s), 691 (m), 630 (vs), 510(m). 1H NMR (Fig. S1) (d6-DMSO): 9.07 (s, 2H, triazole), 8.92 (s, 1H,HACN), 7.91 (s, 1H, imidazole ring), 7.79 (s, 1H, imidazole ring).

According to the analysis of related databases, 584-13-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Li, Ai-Min; Rentschler, Eva; Polyhedron; vol. 154; (2018); p. 364 – 372;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C3H6N4

General procedure: 3-Amino-1,2,4-triazole 8a-f (1.0 mmol), o-hydroxybenzaldehyde9a-e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3¡Á1 ml), and dried. Compounds 1a-w were obtainedin a form of white solids.2,5-Dimethyl-11,12-dihydro-5,11-methano[1,2,4]triazolo[1,5-c][1,3,5]benzoxadiazocine (11a). Yield 48%,mp 310-311C. IR spectrum, nu, cm-1: 757, 1091, 1138,1325, 1485, 1548, 1625, 2885, 2922, 3070, 3421. 1H NMRspectrum, delta, ppm: 7.76 (1H, s, NH); 7.33-7.26 (1H, m,H Ar); 7.20-7.12 (1H, m, H Ar); 6.98-6.90 (1H, m, H Ar);6.82-6.76 (1H, m, H Ar); 4.52 (1H, s, 11-CH); 2.30 (2H, s,13-CH2); 2.02 (3H, s, 2-CH3); 1.91 (3H, s, 5-CH3).13C NMR spectrum, delta, ppm: 157.3 (C); 153.9 (C); 151.0(C); 130.0 (CH); 129.4 (CH); 124.4 (C); 121.2 (CH); 116.7(CH); 82.3 (C); 44.3 (CH); 32.3 (CH2); 24.0 (CH3); 14.2(CH3). Mass spectrum, m/z: 242 [M]+. Found, %: C 64.34;H 5.54; N 23.29. C13H14N4O. Calculated, %: C 64.45;H 5.82; N 23.12.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4923-01-7, its application will become more common.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: Triazoles

A mixture of 50 mg (0.045 mmol) of compound 136 hydrochloride, 18.8 mg (0.166 mmol) of 1 H-1,2,4-triazol-22.4 mg (0.166 mmol)H0Bt and 31.8 mg EDCISuspended in 4mlTwo gas a burning,Add 58.8 mg(0.581 mmol) of triethylamine,Stirred at room temperature overnight,TLC (DCM: Me0H = 10: l)Showing that most of the raw materials did not react,Additional10 mg of 1H-1,2,4-triazole-3-carboxylic acid,47 mg of HATU and 30 mg of triethylamine,Stirred at room temperature overnight,TLC (DCM: Mu0Eta =10: 1) shows most of the raw material reaction finished,Add 15ml saturated sodium bicarbonate solution for 0.5 hours, the organic phase, the water phase(5: 10) dichloromethane methanol mixture (about 10: 1) extraction, and then 2 1 10 ml of dichloromethane extraction, combined organic phase, dryDry, filtered, evaporated to dryness, preparative TLC purification (dichloromethane: methanol = 10: 1)To give the title compound of Example 51,11mg light yellowThe yield was 21.2%.

The synthetic route of 4928-87-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1001401-62-2 as follows. name: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of 2-(2H-l,2,3-triazol-2-yl)benzoic acid (P. Coleman, J. Schreier,WO2007/126934) (500 mg, 2.64 mmol) in SOCl2(5 mL) was heated to refluxed for 1 hour, cooled and concentrated in vacuo. The oil was dissolved in toluene (5 mL) and added to a solution of ((3i?,6i?)-6-methylpiperidin-3-yl)methanol hydrochloride (M. Giradin et al, Org. Proc. Res. Dev. 2013, 17, 61-68) (437 mg, 2.65 mmol) in toluene (5 mL), then aq. sodium hydroxide (5.3 mL, 1 mol/L) was added. The mixture was stirred at 10C for 12 h, poured into water (5 mL) and extracted with EtOAc (5 mL x 3). The combined organic layers were dried over Na2S04, filtered and concentrated in vacuo and the residue purified by chromatography on silica (petroleum ether: EtOAc =5: 1 to petroleum ether: EtOAc =1 :1) to afford the title compound. LRMS m/z (Mu+Eta) 301.2 found, 301.2 required.

According to the analysis of related databases, 1001401-62-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas C.; KUDUK, Scott D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/20933; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 151899-62-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 151899-62-6, name is 3-Iodo-1-trityl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 17 This Example illustrates the preparation of diethyl 3(1-trityl-1,2,4-triazol-3-yl)prop-2-yne phosphonate having the structural formula (XVII). A stirred solution of 1-trityl-3-iodo-1,2,4-triazole (26.24 g, prepared as described in Example 5), propargyl alcohol (3.56 ml) and triethylamine (40 ml) in dry N,N-dimethylformamide (750 ml) was treated successively with tetrakis(triphenylphosphine)palladium (2.77 g) and cuprous iodide (1.0 g). It was stirred for four hours at room temperature under nitrogen and allowed to stand overnight but the reaction had not proceeded to completion. Stirring was continued for a further four periods of seven hours, then the mixture was poured into water (11) and extracted with chloroform (5*250 ml). The extracts were dried over magnesium sulphate, evaporated under reduced pressure and chromatographed on silica, using ethyl acetate-hexane (4:1) as eluant. Trituration with ether gave 1-hydroxy-3(1-trityl-1,2,4-triazol-3-yl)prop-2-yne (12.20 g). Recrystallisation from chloroform gave material m.p. 211 C. NMR (CDCl3): delta 4.45(2H,s), 7.1-7.3(15H,m), 7.95(1H,s).

The synthetic route of 3-Iodo-1-trityl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7411-23-6,Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 250 mL round bottomed flask sodium hydride (60% dispersion in mineral oil) (264 mg, 6.61 mmol) was added to a colorless solution of 3,5-dibromo-1H-1,2,4-triazole (Int-1, 1 g, 4.41 mmol) in DMF (22 ml) The resulting suspension was stirred at room temp during 30 min and 1-iodo-2-methylpropane (973 mg, 5.29 mmol) was added and the reaction was stirred at 40C over night.The reaction mixture was poured into 50 mL H20 and extracted with EtOAc. The organic layers were washed with sat NaCl (3 x 50 mL), dried over MgS04 and concentrated in vacuo. The title compound was isolated as a light red liquid (1.033 g, 82.8 % yield). MS (ES+) m/z: 283.9 [(M+H)+].

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 1H-1,2,3-Triazole

in a polar solvent,DMF, 9,10-dibromoanthracene, triazole, potassium carbonate and copper oxide inthe preparation of the organic compound under heating; 9,10-dibromoanthracenewherein: three azole: potassium carbonate: copper oxide molar ratio of 2: 10:30: 1; The reaction temperature is1500 C, the reaction time of 18 hours

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 288-36-8, its application will become more common.

Reference:
Patent; Tianjin Normal University; WANG, YING; (12 pag.)CN104497023; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics