Triazoles

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C8H8N4

A mixture of formamidine from Step 3 (594 mg) and 4-triazolyl-aniline(279 mg, 1 eq) in AcOH (6 ml) was heated to 125 for 2 h. On cooling and dilution with water (20 ml), a yellow precipitate was isolated by filtration, slurried with IN NaOH and washed with water. After drying, this material was triturated with MeOH / water/ acetone ~ 10:5:5 to give, after filtration and drying, a pale cream solid (510mg, 64%).1H NMR delta 10.1 (IH, br s), 9.27(1H, s), 8.8 (IH, s), 8.58 (IH, s), 8.24(1H, s), 8.18 (IH, d, J 8.85Hz), 8.03 (2H, d, J8.85Hz), 7.84 (4H, m), 7.68 (IH5 d, J9.5Hz), 7.35 (IH, t, J 8.85Hz), 4.26 (2H, m), 3.72 (2H, m), 3.35 (3H, obscured by H2O); LC-MS rt 2.4 m/z 457 ES+.

The synthetic route of 6523-49-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 4923-01-7

A mixture of methyl 3-oxo-2-(4-(4-(trifluoromethoxy)phenyl)piperazin-1 -yl)butanoate (12B) (450 mg, 1 .249 mmol) and 3-methyl-1 H-1 ,2,4-triazol-5-amine (184 mg, 1 .873 mmol) in Acetic Acid (10 mL) was heated at 130 C for 2 h. Then reaction mixtre was diluted with water (25 mL) and adjusted to pH=6 by addition of Na2C03 solution. The resluting mixture was extracted with EtOAc twice. Organic layers were dried over Na2S04 and concentrated to give a crude product that was purified by ISCO with 0-100% EtOAc:EtOH (3:1 ) in hexanes to give two peaks of same mass. Peak two was the desired one based on NMR and LCMS. 1 H NMR (400 MHz, Methanol- d4) delta 7.44 – 7.21 (m, 5H), 5.16 (s, 2H), 4.19 – 3.98 (m, 2H), 3.61 – 3.39 (m, 2H), 3.23 – 2.97 (m, 2H), 2.85 – 2.58 (m, 2H), 2.50 (s, 3H), 2.42 (s, 3H). M/Z (M+H) = 409.1 .

The synthetic route of 5-Methyl-4H-1,2,4-triazol-3-amine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; CHIANELLI, Donatella; GIBNEY, Michael; LERARIO, Isabelle K.; LIANG, Fang; LIU, Xiaodong; MOLTENI, Valentina; NAGLE, Advait Suresh; SMITH, Jeffrey M.; SUPEK, Frantisek; XIE, Yongping; YEH, Vince; (64 pag.)WO2018/229683; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 27996-86-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, This compound has unique chemical properties. The synthetic route is as follows.

Example 94 Preparation of 1-(4-Vinylphenyl)-1H-1,2,4-triazole (DI59) To a stirred solution of 4-[1,2,4]triazol-1-yl-benzaldehyde (9.0 g, 52 mmol) in 1,4-dioxane (100 mL), were added K2CO3 (10.76 g, 78 mmol) and methyl triphenyl phosphonium bromide (22.2 g, 62.4 mmol) at room temperature. The resultant reaction mixture was heated to 70 C. for 18 h. After completion of the reaction (TLC), the reaction mixture was cooled to room temperature and filtered and the obtained filtrate was concentrated under reduced pressure. Purification by flash chromatography (SiO2, 100-200 mesh; 25-30% EtOAc in petroleum ether) to afforded the title compound as a white solid (5.6 g, 63%): ESIMS m/z 172.09 ([M+H]+).

The chemical industry reduces the impact on the environment during synthesis 4-[1,2,4]Triazol-1-yl-benzaldehyde. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171314; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16681-65-5 as follows. Quality Control of 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (111 mg, 1.34 mmol) was added THF (10 mL) and the solution was cooled to -45 C. using a CH3CN-CO2 bath. n-BuLi (2.5 M in hexanes, 0.5 mL, 1.25 mmol) was added dropwise to provide a white suspension. The suspension was stirred at -45 C. for 25 minutes. A pre-warmed THF solution of (2,4-dichloro-3-(2,2,2-trifluoroethyl)quinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (470 mg, 1.17 mmol in 7 mL THF, Intermediate 70) was introduced at -45 C. The reaction temperature was allowed to warm gradually to room temperature over 70 minutes then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (3*40 mL), and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (2% MeOH-DCM increasing to 8% MeOH) afforded the title compound as a tan amorphous solid. MS (ESI): mass calcd. for C20H17Cl2F3N6O, 484.1. found, 485.0 (M+H)+. 1H NMR (500 MHz, CDCl3) delta ppm 8.60 (s, 1H), 8.44-8.40 (m, 2H), 7.95 (d, J=8.8 Hz, 1H), 7.62 (dd, J=8.8, 1.8 Hz, 2H), 6.95 (s, 1H), 5.89 (s, 1H), 4.05 (q, J=9.6 Hz, 2H), 3.89 (s, 3H), 3.32 (s, 3H).

According to the analysis of related databases, 16681-65-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 41253-21-8, These common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 2mmol 3b dissolved in 10mLDMF, to the reaction solution was added 10mmol triazole sodium salt compound 4 and 2mmol DMPU, heated to 100-110 C and stirred for 24 hours. The mixture was quenched with water (1.5 L) and extracted with dichloromethane (50 mL * 2). The dichloromethane phase was washed once with saturated brine (20 mL), dried over Na2SO4 and concentrated to give a yellow oil which was purified by silica gel column chromatography Yellow solid 5b, yield 51%, purity 96%.

Statistics shows that Sodium 1,2,4-triazol-1-ide is playing an increasingly important role. we look forward to future research findings about 41253-21-8.

Reference:
Patent; Gansu Haotian Chemical Technology Co., Ltd.; Wei Pengfei; Wang Ning; Feng Weiwei; Wang Shixiang; Zhu Yingpu; (8 pag.)CN106397417; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., category: Triazoles

4,5-dibromo-2-methyl-2H-l,2,3-triazole. Iodomethane (19.0 g, 133.8 mmol) was added to a solution of 4,5-dibromo-2H-l,2,3-triazole (15.0 g, 66.7 mmol) and potassium carbonate (18.1 g, 131.2 mmol) in N,N-dimethylformamide (100 mL) at -10C. The mixture was warmed to room temperature and stirred for 12 hours. The reaction mixture was concentrated to give a residue. The residue was dissolved in ethyl acetate (200 mL), washed by brine (50 mL x 3), dried over anhydrous sodium sulfate and then filtered. The filtrate was concentrated and the residue was purified by column chramtography (silica gel, dichloromethane/methanol = 15 : 1) to afford 4,5-dibromo-2-methyl-2H-l,2,3-triazole as a white solid (5.9, 36.9 %).

According to the analysis of related databases, 22300-52-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CONSTELLATION PHARMACEUTICALS, INC.; ALBRECHT, Brian, K.; GEHLING, Victor, S.; HEWITT, Michael, C.; TAYLOR, Alexander, M.; HARMANGE, Jean-Christophe; WO2012/151512; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Sodium 1,2,4-triazol-1-ide

Production Example 3Synthesis of 5-(4-chlorobenzyl)-2-meth- oxymethoxymethyl-2-methyl- 1 -(1H- 1 ,2,4-triazole- 1-ylmethyl)cyclopentanol (Compound (4)): 10182] 1H-i,2,4-triazolesodium salt (13.1 mmol) was dissolved in NMP (7 ml), and then heated to an internal temperature of 115 C. To this, Compound (6) (8.76 mmol) was added, and the mixture was thoroughly washed with NMP (1.8 ml). After the internal temperature was returned to 115 C., sodium t-butoxide (5.26 mmol) and trimethyl sulfoxonium bromide (1.476 mmol) were gradually added to the mixture over a period of 3 hours. After the addition, the resulting mixture was stirred at a temperature of 115 C. for 75 minutes. After the reaction solution was cooled down to35 C., water was added to the reaction solution, and then extraction with ethyl acetate was performed. An organic layer of the extract was washed with water and saturated brine, and then dried with anhydrous sodium sulfate. The solvent was distilled off, followed by purification of the residue by silica gel column chromatography, and thus Compound (4), which was a mixture of isomers, was obtained.10183] Yield: 71%

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41253-21-8, its application will become more common.

Reference:
Patent; KUREHA CORPORATION; Miyake, Taiji; Araki, Nobuyuki; Yamazaki, Toru; US2014/94362; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1001401-62-2, The chemical industry reduces the impact on the environment during synthesis 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

General procedure: TBTU (1.1 mmol) was added to a solution of the required carboxylic acid A-1 (1.0 mmol) and DIPEA (2.0 mmol) in DMF (2.0 mL). After stirring at rt for 10 min a solution of the required amine B-3 (1 .0 mmol) in DMF (1.0 mL) was added. The resulting rxn mixture was stirred at rt for up to 3 d before being purified directly by prep. HPLC (method G) to furnish the desired product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOLLI, Martin; BOSS, Christoph; BROTSCHI, Christine; GUDE, Markus; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2014/57435; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 3 (30 mg, 199 muiotaetaomicron) was combined with 3H-[l,2,3]triazole-4- carboxylic acid (22 mg, 199 muiotaetaomicron), HATU (76 mg, 199 muiotaetaomicron) and DIPEA (104 mu, 596 muiotaetaomicron) in DMF (1 mL) and stirred at room temperature for 20 minutes then concentrated in vacuo and the crude residue was purified by normal phase chromatography (0-100% EtOAc/hexanes). The intermediate (30 mg, 67 muiotaetaomicron) was dissolved in THF (1 mL) and 10N NaOH (268 mu^, 268 muiotaetaomicron) and stirred at room temperature for 1 hour. The mixture was acidified with AcOH and purified by preparative HPLC to yield Compound 4 (10 mg).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-[1,2,3]Triazole-4-carboxylic acid, its application will become more common.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 67545-00-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67545-00-0, name is 4-Amino-1-methyl-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows.

Example 293c 5-Bromo-1-methyl-3-(1-methyl-1H-1,2,3-triazol-4-ylamino)pyridin-2(1H)-one 293c Following the procedure in Example 130c, and starting with 293b (500 mg, 5.10 mmol, 1.0 eq.) and 3,5-dibromo-1-methylpyridin-2(1H)-one (2.04 g, 7.65 mmol, 1.5 eq.) afforded 293c as a yellow solid (760 mg, 52%). MS-ESI: [M+H]+ 283.9.

The chemical industry reduces the impact on the environment during synthesis 4-Amino-1-methyl-1,2,3-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; F.Hoffmann-La Roche AG; CRAWFORD, James John; ORTWINE, Daniel Fred; WEI, BinQing; YOUNG, Wendy B.; EP2773638; (2015); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics