Triazoles

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, A new synthetic method of this compound is introduced below., name: 5-Methyl-4H-1,2,4-triazol-3-amine

General procedure: Solution A. A solution of KOH (0.56 g, 0.01 mol) and potassium salt of ethyl nitrocyanoacetate (1.96 g, 0.01 mol) in2 (8 ml) was stirred at room temperature for 3 h, then kept overnight. 4 M aqueous KOAc (8 ml, 0.03 mol) was added to the resulting solution, and the mixture cooled to 5. A mixture of 3-aminoazole 1a-i (0.010 mol), EtOH (10 ml),H2O (10 ml), and concentrated HCl (2.5 ml, 0.030 mol)was treated with a solution of NaNO2 (0.759 g, 0.011 mol)in H2O (3 ml) at -5 . The reaction mixture was kept at this temperature for 10 min, then added to the solution A. The mixture was kept at room temperature for 1 h; the formed precipitate was filtered, stirred with 40% aqueous H2SO4 (10 ml) (AcOH (10 ml) was used for compound 4e), filtered, and dried. The obtained hydrazone 3a-i was heated under reflux in DMF for 3 h. The solvent was evaporated, the residue triturated in water, filtered, and dried.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Voinkov, Egor K.; Ulomskiy, Eugeny N.; Rusinov, Vladimir L.; Chupakhin, Oleg N.; Gorbunov, Evgeny B.; Drokin, Roman A.; Fedotov, Victor V.; Chemistry of Heterocyclic Compounds; vol. 51; 11-12; (2015); p. 1057 – 1060; Khim. Geterotsikl. Soedin.; vol. 51; 11-12; (2015); p. 1057 – 1060,4;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under anhydrous operation, 1H-1,2,3-triazole (2.0 g, 28.9 mmol) was weighed into a 100 mL eggplant-shaped flask, and 30 mL of anhydrous THF was added.NaH (1.065 g, 43.1 mmol) was added portionwise under N2 aq ice bath and stirred at 0 C for half an hour.To the reaction system was added 2-(trimethylsilyl)ethoxymethyl chloride (SEM-Cl, 7.6 mL, 43.1 mmol).After the addition was completed, the mixture was stirred at room temperature for 10 h.The reaction was completed by TLC, quenched with water and extracted with ethyl acetate (2¡Á100 mL).The organic phases were combined, washed once with brine, dried over anhydrous sodium sulfate and evaporated.Separation using a column (petroleum ether: ethyl acetate = 10:1),3.6 g of a colorless liquid were obtained in a yield of 74.2%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,3-Triazole, its application will become more common.

Reference:
Patent; China Pharmaceutical University; Xiang Hua; Huang Ali; Wang Chong; (19 pag.)CN108707177; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 41253-21-8

1.4: tert-butyl 4-cyclohexyl-4-(1H-1,2,4-triazol-1-ylmethyl)piperidine-1-carboxylate 7.83 g of tert-butyl 4-cyclohexyl-4-{[(methylsulphonyl)oxy]methyl}-piperidine-1-carboxylate and 5.68 g of sodium 1,2,4-triazole are introduced into a 100 ml round-bottomed flask under N2. 42 ml of dimethylformamide are added. After reaction in a microwave at 150 C. for 1 h 30 min and with a power of 150 W, the product is hydrolyzed and extracted with ethyl acetate until the aqueous phase is completely depleted. The organic phase is washed with H2O and concentrated to dryness. After crystallization from hexane, 4.42 g of tert-butyl 4-cyclohexyl-4-(1H-1,2,4-triazol-1-ylmethyl)piperidine-1-carboxylate are obtained. 1.5: 4-cyclohexyl-4-(1H-1,2,4-triazol-1-yl-methyl)piperidine 11.2 g of tert-butyl 4-cyclohexyl-4-(1H-1,2,4-triazol-1-ylmethyl)-piperidine-1-carboxylate are placed in 80 ml of 4N hydrochloric acid in dioxane. The reaction medium is stirred for 16 h at ambient temperature. After evaporation to dryness, the precipitate obtained is filter-dried and rinsed with diethyl ether. The hydrochloride thus obtained is dried over P2O5 under reduced pressure. 9.65 g of 4-cyclo-hexyl-4-(1H-1,2,4-triazol-1-ylmethyl)piperidine are obtained.

The synthetic route of 41253-21-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SANOFI-AVENTIS; US2007/149562; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5,Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol), arylaldehyde (1.0 mmol), dimedone (1.0 mmol), and 15 mol % p-TsOH.H2O was stirred in 5 cm3 acetonitrile as solvent at 40-50 C for the appropriate time (Table 3). The progress of the reaction was monitored by TLC. After completion of the reaction, a thick precipitate was obtained. The solid product was filtered off and washed with acetonitrile and subsequently dried in air. The pure product was characterized by conventional spectroscopic methods.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,4-Triazol-5-amine, its application will become more common.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Monatshefte fur Chemie; vol. 145; 12; (2014); p. 1967 – 1973;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 49607-51-4, A common heterocyclic compound, 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-Chloro-4-methylfuran-2,5-dione (625 mg, 4.27 mmol, 1.00 equiv) and 1-methyl-1H-1,2,4-triazole-3-amine (419 mg, 4.15 mmol, 1.00 equiv) were dissolved in toluene (10 ml), 4-toluenesulfonic acid monohydrate (12 mg, 0.06 mmol, 0.02 equiv.) was added and the mixture was stirred under microwave conditions at a temperature of 100 C. for 30 minutes. After cooling to room temperature, water and ethyl acetate were added and the reaction mixture was extracted. The aqueous phase was repeatedly re-extracted vigorously with ethyl acetate, and the combined organic phases were then dried over magnesium sulfate, filtered and concentrated. Final purification by column chromatography of the resulting crude product (gradient ethyl acetate/heptane) gave 3-chloro-4-methyl-1-(1-methyl-1H-1,2,4-triazol-3-yl)-1H-pyrrole-2,5-dione in the form of a colorless solid (110 mg, 11% of theory). 1H-NMR (400 MHz, d6-DMSO delta, ppm) 8.13 (s, 1H), 3.80 (s, 3H), 2.09 (s, 3H).

The synthetic route of 49607-51-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bayer CropScience Aktiengesellschaft; Bayer Aktiengesellschaft; FRACKENPOHL, Jens; HELMKE, Hendrik; FRANKE, Jana; REINGRUBER, Anna Maria; MACHETTIRA, Anu Bheemaiah; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; LUEMMEN, Peter; (96 pag.)US2019/330192; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, category: Triazoles

Example 19 2-{(R)-3-(5?-Chloro-2?-fluorobiphenyl-4-yl)-2-[(3H-[1,2,3]triazole-4-carbonyl)amino]propyl}-2-hydroxymethylpent-4-enoic Acid (isomers a and b) [0449] 2-[(R)-2-Amino-3-(5?-chloro-2?-fluorobiphenyl-4-yl)propyl]-2-hydroxymethylpent-4-enoic acid (isomer a; 85 mg) was dissolved in DMF. 1H-1,2,3-triazole-4-carboxylic acid (2 eq.), DIPEA (2 eq.) and HATU (1 eq.) were also dissolved in DMF and stirred at room temperature for a few minutes. The solutions were then combined and the resulting mixture stirred at room temperature and when the reaction was complete (as determined by LC/MS analysis), the mixture was concentrated in vacuo and purified by preparative HPLC to yield the title compound (isomer a; 21.9 mg). LCMS (ESI): calc. C24H24ClFN4O4=486; obs. M+H=487.1. Retention time: 4.87 min. [0451] 2-[(R)-2-Amino-3-(5?-chloro-2?-fluorobiphenyl-4-yl)propyl]-2-hydroxymethylpent-4-enoic acid (isomer b; 60 mg) was dissolved in DMF (200 muL). 1H-1,2,3-triazole-4-carboxylic acid (35 mg, 310 mumol, 2.0 eq.), DIPEA (200 muL, 1.2 mmol, 7.6 eq.) and HATU (60 mg, 158 mumol, 1.1 eq.) were also dissolved in DMF (200 muL) and stirred at room temperature for a few minutes. The solutions were then combined and the resulting mixture stirred at room temperature and when the reaction was complete (as determined by LC/MS analysis), the mixture was concentrated in vacuo and purified by preparative HPLC to yield the title compound (isomer b; 24.3 mg). LCMS (ESI): calc. C24H24ClFN4O4=486; obs. M+H=487.1. Retention time: 4.92 min. [0452] LC/MS Method: flow rate: 1.5 mL/min; Buffer A: 0.1% TFA/H2O; Buffer B 0.1% TFA/MeCN; gradient elution from 5-100% B over 3.6 minutes, then 100% B for 1.0 minute, detection at 254 nm.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-[1,2,3]Triazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/209352; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 27996-86-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of i-(3,5-dichlorophenyl)ethanone (0.5 g, 2.6 mmol) in ethanol (20 mE) was added 4-(iH-i,2, 4-triazol-i -yl)benzaldehyde (0.46 g, 2.65 mmol) and the reaction was cooled to 0C. Sodium hydroxide (0.22 g, 5.29 mmol) in water (10 mE) was then added and the reaction was allowed to stir for 2 hat 0 C. The reaction was extracted with EtOAc and the combined organic layers were dried over Na2504 and concentrated under reduced pressure to afford the title compound (0.149 g, 17%):); ESIMS mlz 430.05 ([M+H]) 344.08

The chemical industry reduces the impact on the environment during synthesis 4-[1,2,4]Triazol-1-yl-benzaldehyde. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171312; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life.

To a solution of 2-chloro-5-nitro-3-(trifluoromethyl)pyridine (1.2 g, 6.84 mmol) and 2H-1,2,3-triazole (0.567 g, 8.20 mmol) in anhydrous DMA (5 mL) was added K2CO3 (1.89 g, 13.67 mmol). The reaction mixture was stirred at room temperature for 2 h. The mixture was filtered and washed with ethyl acetate (10 mL*3). The filtrate was concentrated to dryness to give a crude product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,3-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Janssen Biotech, Inc.; Lu, Tianbao; Allison, Brett Douglas; Barbay, Joseph Kent; Connolly, Peter J.; Cummings, Maxwell David; Diels, Gaston; Edwards, James Patrick; Kreutter, Kevin D.; Philippar, Ulrike; Shen, Fang; Thuring, Johannes Wilhelmus John Fitzgerald; Wu, Tongfei; (412 pag.)US2018/170909; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6086-21-1, name is 1-Methyl-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C3H5N3

[00161] To a stirred solution of SM-1 (2.0 g, 24.0 mmol) in THF (20 mL) was added n- butyl lithium (19 mL, 12.0 mmol) at -78 ¡ãC dropwise and stirred for 2 h. Then solid CO2 (2 g) was added and stirred at -78 ¡ãC for 1 h. The reaction mass was stirred at RT for 16 h. After consumption of the starting material (by TLC), the reaction mixture was quenched with water (3 mL) and the obtained solid was filtered. The solid was triturated with diethylether/n-pentane (10 mL/10 mL). The white color solid was dried under vaccum to afford Int-J (2.0 g, 65.7percent) as white solid. 1H-NMR: (500 MHz, DMSO-i): delta 7.70 (s, 1H), 4.01 (s, 3H) LCMS m/z: 128.3 [M++l]

The synthetic route of 6086-21-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NAUREX, INC.; LOWE, John, A.; KHAN, M., Amin; WO2014/120800; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6,Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a suspension of NaH (60% in mineral oil, 387.9 mg, 9.7 mmol) in THF (20 mL) at 0C is added a solution of A6a (2.0 g, 8.8 mmol, Matrix) in THF (20 mL). The reaction mixture is allowed to warm to RT and is stirred for 30 mm. It is then cooled again to 0C and A6b (1 .9 mL,10.6 mmol, Combi Blocks) is added. The reaction mixture is stirred overnight at RT and diluted with EtOAc (50 mL). The organic layer is washed with water (30 mL) and brine (30 mL), dried over MgSO4, and filtered. The filtrate is concentrated to give A6c which is used without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Dibromo-1H-1,2,4-triazole, its application will become more common.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; FADER, Lee; BILODEAU, Francois; POIRIER, Maude; PARISIEN, Mathieu; KUHN, Cyrille; THIBEAULT, Carl; TRINH, Thao; WO2014/70978; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics