Triazoles

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde, A new synthetic method of this compound is introduced below., Safety of 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde

To a flask containing 6-bromo-4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinoline (1.45 g, 3.37 mmol, Intermediate 5: step d) was added THF (25 mL) and the solution was cooled to -75 C. n-BuLi (2.5 M in hexanes, 1.3 mL, 3.25 mmol) was then added dropwise. After 2 minutes, 1-methyl-1H-1,2,3-triazole-5-carbaldehyde (580 mg, 5.22 mmol, in 3 mL THF) was introduced. The reaction mixture was allowed to warm to -20 C. over 45 minutes at which time the reaction was quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (5*40 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated to dryness. Chromatography on silica gel (5% CH3CN-DCM increasing to 30% CH3CN +2% MeOH) provided the title compound as an off white amorphous solid.

The synthetic route of 202931-88-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; (53 pag.)US2017/258782; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, This compound has unique chemical properties. The synthetic route is as follows., category: Triazoles

3,5-bis(1-cyano-1-methylethyl) benzyl bromide obtained in Step IV (600 g, 1.965 mol) was heated with 4-amino-1,2,4-triazole (247.9 g, 2.948 mol) in isopropanol (4.5 L) for 7 to 7.5 hours at 80 C. to 85 C. The reaction mass was gradually cooled to 20 C. to 25 C. The reaction mass was stirred for 1 hour. The reaction mass was further cooled to 0 C. to 5 C., stirred for 2 hours, filtered, and washed with dichloromethane (2¡Á500 ml). The reaction mass was sucked dry. The dried cake was further dried at 40 C. to 45 C. under vacuum to obtained 2,2′-[5-(4-amino-1,2,4-triazolium-1-ylmethyl)-1,3-phenylene]di(2-methylpropio-nitrile)bromide (497.5 g, 65.0% yield). MP-198-203 C. IR (In cm-1, KBr): 3204, 3116, 3080, 2987, 2229, 1643, 1607, 1565, 1469, 1438, 1196, 1004 H1NMR (in CDCl3,delta (ppm)]: 10.31 (1H,s),9.20 (1H,s),7.66-7.63 (3H,s),6.984 (2H,s),5.657 (2H,s),1.71 ( 12H,s). M+[309] (free base)

According to the analysis of related databases, 584-13-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Glenmark Pharmaceuticals Limited; US2006/189670; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

To a stirred solution of compound GX (i g, 2.91 mmol) in DMF (10 mL) under argon atmosphere were added potassium carbonate (602 nig, 4.36 mmol) and 3-methyl-lH-l ,2,4- triazoie (483 mg, 5.82 mmo) at RT. The reactioii mixture was stirred at 80 C for 16 Ii. The reaction mixture was diluted with water (50 mL) and extracted with EfOAc (2 x 50 mL). The combined organic layers were dried over anhydrous NaiSC^ and concentrated under reduced pressure. The crude material was purified by silica gel column chromatography (eluent: 50% EtOAc/Hexane) which was further purified by preparative HPLC to afford compound JL (550 nig, 1.29 mmol, 44%) & compound JM (550 nig. 1.2 mniol, 44%) as an off-white solids. JL data: 5H NMR (500 MHz, DMSO-(): 5 8.71 (s, 1H), 8.15 (dd, J= 8.7, 2.3 Hz, 1H), 8.01 (s, 1H), 7.37 (d, J = 8.1 Hz, 1H), 7.31-7.24 (ni. IH), 7.24-7.18 (in, 1H), 7.17-7.14 (m, 1H), 7.09- 7.05 (m, 1H), 6.79 (s, IH), 5.15 (d, J = 14.5 Hz, 1H), 4.75 (d, J= 15.1 Hz, IH), 2.04 (s, 3H); JM data: 1H NMR (500 MHz, DMSO-?): S 8.71 (s, 1H), 8.17 (dd, J= 8.1, 2.3 Hz, 1H)5 7.56 (s, 1H), 7.44 (d J= 8.1 Hz, lH), 7.33-7.27 (ni, 1H), 7.26-7.22 (m, IH), 7.19-7.16 (m, 1H), 7.10-7.06 (m, 1H), 6.66 (s, 1H). 4.98 (d, /= 14.49 Hz, IH), 4.86 (d. /= 13.91 Hz, IH), 2.22 (s, 3H).

The synthetic route of 3-Methyl-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VIAMET PHARMACEUTICALS, INC.; YATES, Christopher, M.; SHAVER, Sammy, R.; HOEKSTRA, William, J.; (455 pag.)WO2017/117393; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1001401-62-2,Some common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 6: (2-(2H-1 ,2,3-triazol-2-yl)phenyl)((2R,5R)-5-hydroxy-2-methylpiperidin-1-yl)methanone (6) A solution of (3R, 6R)-6-methylpiperidin-3-ol (5.31 g, 46.1 mmol), 2-(2H-1,2,3- triazol-2-yl)benzoic acid (10.5 g, 55.3 mmol), EDC (17.7 g, 92.0 mmol), 1-hydroxy-7- 30 azabenzotriazole (12.6 g, 92.0 mmol), triethylamine (19.3 mL, 138 mmol) in DMF (300 mL) was stirred at 50 C overnight, then diluted with saturated aqueous sodium bicarbonate and extracted 3x with ethyl acetate. The organics were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-100% ethyl acetate in hexanes), providing the titled compound as a pale yellow solid. LRMS m/z (M+H) 287.3 found, 287.1 required.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2015/88864; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C2H5N5

Example 142-Amino-5-cyclopropyl-6- [(3,4-dichlorophenyl)methyl] -4H- [ 1 ,2,4] triazolo [5,1- b] pyrimidin-7-oneEthyl 3-cyclopropyl-2-[(3,4-dichlorophenyl)methyl]-3-oxo-propanoate (200 mg, 634.5 mmol, Method II) and lH-l,2,4-triazole-3,5-diamine (57.2 mg, 577 mmol) were added to tri-n-butylamine (228 mu) and the resulting mixture stirred at 160 ¡ãC for 48 h. The mixture was evaporated and the residue recrystallised from isopropanol to give the title compound (43 mg, 21percent) as a white solid.1H NMR (400.13 MHz, DMSO-d6) delta 0.90-1.05 (4H, m), 2.05-2.17 (1H, m), 4.00 (2H, s), 6.25 (2H, br s), 7.28 (1H, d), 7.52 (2H, d), 12.20 (1H, br s); m/z (ES) (M+H)+ = 350.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1455-77-2.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; BENGTSSON, Boel, Ase; BLACKABY, Wesley; CUMMING, John; FAULL, Alan, Wellington; LARSSON, Joakim; NASH, Ian, Alun; OLDHAM, Keith; PAPE, Andrew; WO2011/114148; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5,Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Add 1.0 mmol of p-nitrobenzaldehyde, 1.0 mmol of ethyl acetoacetate, 1.0 mmol of 3-amino-1,2,4-triazole, and 0.18 g of magnetic nanosulfonic acid to 9 ml of ethanol-dimethylformamide, respectively. In an aqueous solution (V (ethanol): V (dimethylformamide): V (water) = 7: 2: 1) in a 50 ml three-necked flask with a stirrer and a condenser tube, stir well at room temperature. Heating to 86 C for 146min, TLC (thin plate chromatography) detection, raw material spots disappeared, magnetic nanosulfonic acid catalyst was adsorbed with a magnet while hot, the remaining reaction solution was cooled to room temperature, a large amount of solids were precipitated, the solids were crushed, and left to stand , Suction filtration, the obtained filter residue was washed with ethanol and vacuum-dried to obtain 7- (4-nitrophenyl) -5-methyl-4,7-dihydro- [1,2,4] triazolo [1, 5-a] Pyrimidine-6-carboxylic acid ethyl ester, the purity by liquid chromatography was 99.1%, and the calculated purity was 83%. The adsorbed magnetic nanosulfonic acid was put into the filtrate after suction filtration without any treatment, and p-nitrobenzaldehyde, ethyl acetoacetate, and 3-amino-1,2,4-triazole were directly added for repeated use.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,4-Triazol-5-amine, its application will become more common.

Reference:
Patent; Ma’anshan Tai Bo Chemical Technology Co., Ltd.; Lu Hua; Shen Jianzhong; (11 pag.)CN110540540; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-70-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

G. (2S,4R)-5-Biphenyl-4-yl-2-hydroxymethyl-2-methyl-4-[(3H-[1,2,3]triazole-4-carbonyl)-amino]-pentanoic acid 2-methanesulfonyl-ethyl ester (R4=H; R7=-(CH2)2-SO2CH3) (2S,4R)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-2-methyl-pentanoic acid (207 mg, 501 mumol, 1.0 eq.), HOBt (0.2 g, 1.5 mmol, 3.0 eq.), and EDCI (260 muL, 3.0 eq.) were dissolved in DCM (4 mL). After stirring for 2 minutes, 2-(methylsulfonyl)ethanol (0.5 g, 4.0 mmol, 8.0 eq.) and 4-methylmorpholine (220 muL) were added. The mixture was stirred at room temperature for 2 hours. The reaction was quenched with water. The DCM layer was separated and concentrated, then purified by flash chromatography (10-100% EtOAc/hexanes). MeCN (2 mL) and 4 M of HCl in dioxane (0.5 mL) were added and the resulting mixture was stirred at room temperature for 1 hour. The solvent was removed to provide the intermediate HCl salt, which was used in the following coupling step. 1,2,3-Triazole-4-carboxylic acid (56.6 mg, 501 mumol, 1.0 eq.), HATU (190 mg, 501 mumol, 1.0 eq.) were dissolved in DMF (1 mL) and the resulting solution was stirred for 5 minutes, followed by the addition of DIPEA (262 muL) and the intermediate HCl salt. After 10 minutes, the reaction was quenched with AcOH and the product was purified by preparative HPLC to yield the title compound (28 mg; purity 95%). MS m/z [M+H]+ calc’d for C25H30N4O6S, 515.19. found 515.4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-[1,2,3]Triazole-4-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 103755-58-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 103755-58-4 name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(1-Phenyl-1H-1,2,3-triazol-4-yl)methanol (0.37 g, 2.0 mmol) was added at 0 C to a mixture of potassium hydroxide (0.64 g, 5.0 mmol) and p-toluenesulfonyl chloride (0.45 g, 2.2 mmol) in tetrahydrofuran (8 mL). The mixture was stirred at room temperature for 3 h. The mixture was then diluted with ethyl acetate (20 mL) and washed with water (2 x 20 mL). The organic layer was dried over with MgSO4, concentrated in vacuo and the obtained crude product was purified by column chromatography (ethyl acetate/hexanes, 3:7) on a silica gel to give compound 2 (0.33 g, 50%) as a white solid; m.p. 104-106 oC. 1H NMR (300 MHz, CDCl3): delta = 8.00 (s, 1 H), 7.82 (d, J = 8.3 Hz, 2 H), 7.69-7.65 (m, 2 H), 7.56-7.43 (m, 3 H), 7.34 (d, J = 8.0 Hz, 2 H), 5.30 (d, J = 0.3 Hz, 2 H), 2.43 (s, 3 H). 13C NMR (75 MHz, CDCl3): delta = 145.3, 141.8, 136.8, 133.1, 130.1, 130.0, 129.3, 128.1, 122.3, 120.7, 63.2, 21.7. HRMS (ESI): calcd. for C16H16N3O3S [M + H]+ 330.0912; found 330.0913.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, and friends who are interested can also refer to it.

Reference:
Article; Kwon, Young-Do; Son, Jeongmin; Yun, Mijin; Chun, Joong-Hyun; Tetrahedron Letters; vol. 59; 29; (2018); p. 2848 – 2852;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, A new synthetic method of this compound is introduced below., SDS of cas: 4928-87-4

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (100 mg, 0.87 mmol) and 4- Methoxy-3- (trifluoromethyl)benzylamine (200 mg, 0.97 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (146 mg, 0.97 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (186 mg, 0.97 mmol) followed by N- methylmorpholine (0.38 mL, 3.48 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc as eluents to get the desired amide 10 (62.8 mg, 24 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.66 (br s, 1H), 9.23 (br s, 1H), 8.49 (br s, 1H), 7.60-7.58 (m, 2H), 7.22 (d, J= 8.4 Hz, 1H), 4.43 (d, J= 6 Hz, 2H), 3.86 (s, 3H); 19F -NMR (376 MHz, DMSO-de): <5 -60.82 ppm. MH+ = 301.4 m/z. The synthetic route of 4928-87-4 has been constantly updated, and we look forward to future research findings. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 626248-56-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 626248-56-4, name is 3-(2H-1,2,3-Triazol-2-yl)aniline belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

A mixture of tert-butyl (1S,2R)-2-(5-bromo-6-cyanopyridin-3-ylamino)cyclohexylcarbamate (90 mg, 0.227 mmol), 3-(2H-1,2,3-triazol-2-yl)aniline (40 mg, 0.250 mmol), NaOPh trihydrate (50 mg, 0.294 mmol), xantphos (30 rng, 0.051 mmol) and Pd2dba3 (18 mg, 0.019 mmol) in dioxane (3 mL) was degassed with Ar, then was stirred at 110 C for 20 h. Water and EtOAc were added. Organic phase was separated, washed with aq. 1N NaOH, dried over Na2SO4, concentrated in vacuo to give tert-butyl (1S,2R)-2-(5-(3-(2H-1,2,3-triazol-2-yl)phenylamino)-6-cyanopyridin-3-ylarnino)cyclohexylcarbamate, which was then dissolved in trifluoroacetic acid (5 mL). The solution was allowed to stand for 2 h. Excess of trifluoroacetic acid was removed in vacuo. The residue was purified by HPLC to give 3-(3-(2H-1,2,3-triazolyl)phenylamino)-5-((1R,2S)-2-aminocyclohexy]amino)picolinonitrile (70 mg).

The synthetic route of 3-(2H-1,2,3-Triazol-2-yl)aniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PORTOLA PHARMACEUTICALS, INC.; SONG, Yonghong; XU, Qing; SRAN, Arvinder; BAUER, Shawn M.; JIA, Zhaozhong J.; KANE, Brian; PANDEY, Anjali; WO2013/192046; (2013); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics