Triazoles

Related Products of 956317-36-5, These common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A round-bottom flask equipped with a magnetic stirrer bar was charged with 5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (5.0 g, 24.6 mmol, 1.0 equiv) and THF (250 mL). Theresulting solution was cooled to 0 C, followed by successive addition of triethyl amine (3.58 mL, 25.8 mmol, 1.05 equiv) and isobutyl chloroformate (3.35 mL, 25.8 mmol,1.05 equiv). The reaction mixture was stirred at ambient temperature for 1 h. Subsequently, the precipitate was filtered off and the filtrate was concentrated under reduced pressure.The residue was taken up in ethyl acetate and washed with saturated NaHCO3 solution. The organic layer was washed with H20, dried over anhydrous sodium sulfate and concentrated under reduced pressure, yielding (isobutyl carbonic) 5-methyl-2-(2H-1,2,3- triazole-2-yl)benzoic anhydride (6.6 g, 88%) as an orange-brown oil.?H NMR (500 MHz, CDC13) oe = 7.80 (s, 2H), 7.70 (d, J = 8.20 Hz, 1H), 7.64 (d, J = 1.45Hz, 1H), 7.45 (dd, J = 1.45, 8.20 Hz, 1H), 3.98 (d, J = 6.60 Hz, 2H), 2.42 (s, 3H), 1.96(sept, J = 6.71 Hz, 1H), 0.91 (d, J = 6.75 Hz, 6H)?3C NMR (125 MHz, CDC13) oe = 161.0, 148.6, 139.0, 136.4, 135.9, 133.8, 131.2, 124.3, 124.1, 75.4, 27.6, 20.9, 18.7

Statistics shows that 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid is playing an increasingly important role. we look forward to future research findings about 956317-36-5.

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 107534-96-3, name is 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol

Complex trans-[PdCl2L2] (I) was prepared at 20by methods A and B at different predetermined Pd(II):L molar ratios. Method A: The batch ratio was Pd(II) : L = 1 : 2.To a magnetically stirred aqueous solution (3 mL) containing K2[PdCl4] (0.30 g, 0.92 mmol), the reagent L (0.57 g, 1.84 mmol) dissolved in acetone (6.5 mL)was added. The brown color of the solution quickly changed to orange. The bulky yellow precipitate was formed in 5 h; in 16 h after the evaporation of acetone,the precipitate was filtered out, washed with water and then hexane, and dried in air. The yield was 97%. Method B: The predetermined ratio was Pd(II) : L =1 : 1. To an aqueous solution (3 mL) containing K2[PdCl4] (0.30 g, 0.92 mmol), the reagent (0.28 g,0.92 mmol) dissolved in acetone (6.5 mL) was added under stirring. A yellow precipitate was formed in few minutes. After stirring for 24 h the precipitate was filtered out, washed with water and hexane, and dried. The yield was 81% based on the reagent.

The synthetic route of 3-((1H-1,2,4-Triazol-1-yl)methyl)-1-(4-chlorophenyl)-4,4-dimethylpentan-3-ol has been constantly updated, and we look forward to future research findings.

Reference:
Article; Khisamutdinov; Shitikova; Anpilogova; Golubyatnikova; Mulagaleev; Murinov; Russian Journal of Inorganic Chemistry; vol. 60; 5; (2015); p. 638 – 646; Zh. Neorg. Khim.; vol. 60; 5; (2015); p. 710 – 718,9;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 27808-16-8,Some common heterocyclic compound, 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 5-chloro-6-methyl-pyrazolo [1,5-a] pyrimidine-3-carboxylic acid ethyl ester (400 mg), 4-methyl -1H-1, 2, 3-triazole (153 mg), potassium carbonate (277 mg) and N, N- dimethyl formamide (5 ml) stirring the mixture at room temperature overnight. The reaction mixture is poured into water at room temperature, the mixture and using ethyl acetate extraction. Organic layer using saturated salt water cleaning, in order to water-free magnesium sulfate drying, and the concentrated under reduced pressure. Aid hemostasis by silica gel column chromatography (ethyl acetate/hexane) purification in order to produce the title compound (106 mg).

The synthetic route of 27808-16-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAKED A PHARMACEUTICAL COMPANY LIMITED; KAWASAKI, MASANORI; MIKAMI, SATOSHI; NAKAMURA, SHINJI; NEGORO, NOBUYUKI; IKEDA, SHUHEI; ASHIZAWA, TOMOKO; MARUI, SHOGO; TANIGUCHI, TAKAHIKO; (135 pag.)TW2016/520; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 27996-86-7 as follows. Quality Control of 4-[1,2,4]Triazol-1-yl-benzaldehyde

To a stirred solution of 4-[1,2,4]-triazol-1-yl-benzaldehyde (9.0 g, 52 mmol) in 1,4-dioxane (100 mL), were added K2CO3 (10.76 g, 78 mmol) and methyl triphenyl phosphonium bromide (22.2 g, 62.4 mmol) at room temperature. The resultant reaction mixture was heated to 70 C. for 18 h. After completion of the reaction (TLC), the reaction mixture was cooled to room temperature and filtered and the obtained filtrate was concentrated under reduced pressure. Purification by flash chromatography (SiO2, 100-200 mesh; 25-30% EtOAc in petroleum ether) to afforded the title compound as a white solid (5.6 g, 63%): ESIMS m/z 172.09 ([M+H]+).

According to the analysis of related databases, 27996-86-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171308; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-88-5, Quality Control of Methyl 1H-1,2,4-triazole-3-carboxylate

In a 250 ml of clean three-necked reaction flask provided with a thermometer and mechanical stirrer, add 90 g beta-D-ribofuranose-1,2,3,5-tetraacetate. Oil bath heat until beta-D-ribofuranose-1,2,3,5-tetraacetate is completely melted. Then add 37.8 g 1,2,4-triazolecarboxylic acid methyl ester and 0.6 g bis(4-nitrophenyl)phosphate. Start strirring. At 103 ¡ãC maintain temperature and stir for 10 min. At 108 ¡ãC high vacuum, react for 2h. Cool to 90 ¡ãC, by adding methanol, continue to stir until 50 ¡ãC white crystal the storm analyzes right and left of the, in -15 ¡ã C stirring crystallization 4 hours. Filtering, ice-methanol washing, for 65 ¡ãC drying, (II) 91.2g obtaining white RBV condensates, yield 84.2percent (with four acetylmethylene ribose idea ), (II) the content of the white RBV condensates to 98.1percent, purity of 99.1percent ( unitary method HPLC chromatographic area),

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Hubei Yitai Pharmaceutical Co., Ltd.; Wu, Xiaoyu; Zou, Zude; Xiong, Zuxiang; Huang, Linjun; Guo, Liangchen; Chen, Jin; (6 pag.)CN105732750; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4923-01-7, Quality Control of 5-Methyl-4H-1,2,4-triazol-3-amine

General procedure: A solution of 21% (w/v) sodium ethoxide (9.13 mL, 24.46 mmol) in ethanol was added to a solution of 3-methyl-1H-1,2,4-triazol-5-amine (2 g, 20.39 mmol) and diethylmalonate (3.42 mL, 22.42 mmol) in Ethanol (10 mL) in a 100 mL round bottomed flask. The resulting mixture was stirred at 75 C overnight. The reaction mixture was cooled and the resulting precipitate was filtered and rinsed with EtOH. The solid was air dried to yield an off white solid (2.84g, 84%). 1H NMR (400 MHz, DEUTERIUM OXIDE) ppm 2.21 (s, 3 H) 4.87 (s, 1 H); LC/MS: MS(ES+) m/e 167 (MH+).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Methyl-4H-1,2,4-triazol-3-amine, and friends who are interested can also refer to it.

Reference:
Article; Sanchez, Robert M.; Erhard, Karl; Hardwicke, Mary Ann; Lin, Hong; McSurdy-Freed, Jeanelle; Plant, Ramona; Raha, Kaushik; Rominger, Cynthia M.; Schaber, Michael D.; Spengler, Michael D.; Moore, Michael L.; Yu, Hongyi; Luengo, Juan I.; Tedesco, Rosanna; Rivero, Ralph A.; Bioorganic and Medicinal Chemistry Letters; vol. 22; 9; (2012); p. 3198 – 3202;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 626248-56-4, name is 3-(2H-1,2,3-Triazol-2-yl)aniline, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 626248-56-4, Formula: C8H8N4

Step 3: To a suspension of ethyl 5-cyano-2,6-dichloronicotinate Q4 (1.10 g, 4.4 mmol) in ACN (20 ml) was added 3-(2H-l,2,3-triazol-2-yl)aniline Q5 (774 mg, 4.84 mmol) and DIPEA (1.18 mL, 6.6 mmol). The mixture was stirred at ambient temperature for 15 h, and diluted with water; the resulting precipitate was collected by filtration to giveintermediate, which was added THF (12 mL) and a solution of LiOH (106 mg, 8.8 mmol) in water (6 mL). After stirring at ambient temperature for 2 h, THF was removed byconcentration and the residue was acidified to pH 2, the resulting precipitate was collected by filtration to give 2-(3-(2H-l,2,3-triazol-2-yl)phenylamino-6-chloro-5-cyanonicotinic acid Q6 (870 mg).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; PORTOLA PHARMACEUTICALS, INC.; JIA, Zhaozhong, J.; SONG, Yonghong; XU, Qing; KANE, Brian; BAUER, Shawn, M.; PANDEY, Anjali; WO2012/61418; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 27996-86-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 5 mmol appropriate benzaldehyde and 5 mmol thiosemicarbazide in isopropanol was refluxed with a catalytic amount of acetic acid. The solid precipitate was filtered and crystallized from ethanol.

The synthetic route of 4-[1,2,4]Triazol-1-yl-benzaldehyde has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ozadali, Keriman; Unsal Tan, Oya; Yogeeswari, Perumal; Dharmarajan, Sriram; Balkan, Ayla; Bioorganic and Medicinal Chemistry Letters; vol. 24; 7; (2014); p. 1695 – 1697;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows.

General procedure: TBHP (3 eq.) was added to a solution of 3-phenyl-1,2,4-triazole (0.4 mmol) 1a, benzaldehyde 2a (0.6 mmol), followed by TBAI (20 mol%) in DCE(4 mL). The reaction mixture was stirred at 120 oC under nitrogen atmosphere for 5 h. After completion of the reaction confirmed by TLC, the reaction mixture was cooled to room temperature and partitioned between water and ethyl acetate. The organic and aqueous layers were then separated and aqueous layer was extracted with ethyl acetate twice. The combined organic extracts were dried over anhydrous Na2SO4 and concentrated under reduced pressure to afford the crude. The crude was further purified by silica gel chromatography using EtOAc/hexane as eluents to furnish the desired product 3 or 5.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Agisho, Habtamu Abebe; Esatu, Habdolo; Hairat, Suboot; Zaki, Mehvash; Tetrahedron Letters; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1338226-21-3, name is 3-(Chloromethyl)-4-methyl-1H-1,2,4-triazol-5(4H)-one, A new synthetic method of this compound is introduced below., Application In Synthesis of 3-(Chloromethyl)-4-methyl-1H-1,2,4-triazol-5(4H)-one

Step 8(f): 3-fluoro-1-[(4-methyl-5-oxo-4,5-dihydro-1H-1,2,4-triazol-3-yl)methyl]-4-(trifluoromethyl)pyridin-2(1 H)-one (8-8) To a solution of 3-fluoro-4-(trifluoromethyl)pyridin-2-ol (8-5; 50 mg; 0.34 mmol) in dioxane 1.7 mL) was added K2CO3 (51 mg; 0.373 mmol) and the mixture was stirred for 5minutes. 5-(chloromethyl)-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-one (8-4; 68 mg; 0.373 mmol) was then added, and the mixture was stirred for 2 hours at room temperature. The mixture was diluted with water, and extracted with CH2Cl2. The organic extracts were dried (MgSO4) and concentrated in vacuo. Purification by ISCO CombiFlash provided the title compound. 1H NMR (400 MHz, CDCl3): delta 10.14 (s, 1 H); 8.11 (d, J=5.2 Hz, 1 H); 7.18 (t, J=4.7 Hz, 1 H); 5.40 (s, 2 H); 3.41 (s, 3 H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Burch, Jason; Cote, Bernard; Nguyen, Natalie; Li, Chun Sing; St-Onge, Miguel; Gauvreau, Danny; US2011/245296; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics