Triazoles

Related Products of 584-13-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: In a typical procedure, 3-arylimino-1,2,4-triazoles and 4-arylimino-1,2,4-triazoles 1-25 were synthesized by mixing 3-amino-1,2,4-triazole or 4-amino-1,2,4-triazole (2 mmol), substituted benzaldehydes (2 mmol) and H2SO4 (2 mL) in ethanol (15 mL). The mixtures were refluxed for 4-10 h, while progress of the reaction was monitored through thin layer chromatography. When reaction was completed, solvent was evaporated on a rotary evaporator under reduced pressure and residue was washed with hot hexane. Resulting compounds were crystallized by ethanol to give title compounds in moderate to good yields.

The chemical industry reduces the impact on the environment during synthesis 4H-1,2,4-Triazol-4-amine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Khan, Khalid Mohammed; Siddiqui, Salman; Saleem, Muhammad; Taha, Muhammad; Saad, Syed Muhammad; Perveen, Shahnaz; Choudhary, M. Iqbal; Bioorganic and Medicinal Chemistry; vol. 22; 22; (2014); p. 6509 – 6514;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, molecular formula is C9H9N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol

General procedure: The 1-substituted-1,2,3-triazol-4-yl-methanol 1 (4mmol) was taken in dry acetone (10mL), cooled to 0C and the Jones reagent (CrO3+H2SO4+Acetone) (4mmol) was added slowly over a period of 15min. The reaction mixture was stirred for 20min at 0C. After completion of reaction, filtered through the short pad of celite and the filtrate was collected and concentrated under vacuum. The residue was purified by passing through a column packed with silica gel using petroleum ether/EtOAc (8:2) as eluents.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 103755-58-4, its application will become more common.

Reference:
Article; Sambasiva Rao; Kurumurthy; Veeraswamy; Santhosh Kumar; Poornachandra; Ganesh Kumar; Vasamsetti, Sathish Babu; Kotamraju, Srigiridhar; Narsaiah; European Journal of Medicinal Chemistry; vol. 80; (2014); p. 184 – 191;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-88-0, name is 1H-1,2,4-Triazole, This compound has unique chemical properties. The synthetic route is as follows., Formula: C2H3N3

Catalyst 1: sodium 1,2,4-triazolate 200 ml of dry methanol and 48 ml of a 30% solution of sodium methanolate in methanol, corresponding to 0.25 mol sodium methanolate, were put first into a three-necked flask agitator with a mechanical stirrer, internal thermometer and reflux cooler, with dry nitrogen. 17.4 g (0.25 mol) of 1,2,4-triazole was added in portions at room temperature. When the addition of the 1,2,4-triazole had been completed the reaction mixture was agitated for 4 hours at reflux temperature. The solvent was then distilled off at reduced pressure and the oily residue left was mixed with 200 ml of methylene chloride at room temperature. The mixture was agitated for 15 minutes at room temperature and the product precipitated as a solid was filtered off. 22.5 g sodium-1,2,4-triazolate (yield 98%) was obtained in the form of a colorless powder.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-88-0.

Reference:
Patent; Laas, Hans-Josef; Halpaap, Reinhard; Richter, Frank; Kocher, Jurgen; US2003/13872; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 423165-07-5, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To an aqueous solution of active hydrogen containing amide, few drops of aqueous ammonia solution (1 eq.) and secondary amine (1 eq.) were added in drops in an ice-cold solution under constant stirring for dissolution. Aromatic aldehydes dissolved in methanol, added dropwise to the above mixture and stirring was continued for 2 h. The formation of compounds were observed within 30 min. Reaction was monitored by TLC, after completion of reaction, the product was filtered and washed with distilled water and dried at 45-50 C.

The chemical industry reduces the impact on the environment during synthesis exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane. I believe this compound will play a more active role in future production and life.

Reference:
Article; Viveka, T. Lakshmi; Sharada, L. Nalanda; Asian Journal of Chemistry; vol. 30; 9; (2018); p. 2029 – 2034;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Safety of 1H-1,2,3-Triazole

The iodide 19 (6.04 kg, 23.0 mol), THF (45 L) and DMF (9.0 L) were charged to a vessel. Copper iodide (218 g, 1.15 mol) and potassium carbonate (7.94 kg, 57.4 mol) were added and the mixture heated to an internal temperature of 40 C. 1 ,2,3-Triazole (3.16 kg, 46., 0 mol) was added as a solution in THF (6.0 L) over half an hour (no exotherm) and heating continued to 65 C (again no exotherm observed) and the reaction monitored by HPLC. Once complete Nu,Nu-dimethylethylenedi amine (244 mL, 2.30 mol) was added and mixture cooled to RT. Aqueous 3.6 M HC1 (36 L) was added (exotherm) and the mixture extracted twice with ethyl acetate (2 x 30 L). The combined organics were washed with LiCl solution (2 x 20 L). The acid solution assayed for 3.79 kg of 5 (81%) and 4.64 kg of 5 and 20 combined (99%). A solution of acids 5 and 20 (approx. 4.64 kg, 22.9 mol) in THF and EtOAc (approx. 1 10 L) was concentrated to low volume. THF (90 L) was added and the solvent composition checked by 1H NMR to ensure most ethyl acetate had been removed. Sodium tert-butoxide (2.42 kg, 25.2 mol) was added slowly as a solid over 1-2 h (slight exotherm), allowing the sodium salt to form and stirred overnight at RT. The liquors showed a 45:55 ratio of product 5: starting material 19 and the solid was collected by filtration, washed with THF (2 x 20 L) and dried in a vacuum oven (T = 40 C) for 15 h to afford 4.22 kg of crude sodium salt. The crude sodium salt (4,22 kg, 14.9 mol) was charged to a 50 L vessel and 3.6 M HC1 (21.2 L) was added with cooling. The slurry was then stirred at room temperature for 16 h and the off-white solid isolated by filtration. The cake was washed with water (11 L) and iP Ac/Heptane (2 chi 5L), then dried in a vacuum oven (T = 35 C) for 15 h to give 3.10 kg of crude acid 5 (97.9 LCAP, 92 wt%, corrected weight 2.85 kg, 61% yield from 19). The acid 5 (2.85 kg corrected, 14.0 mol) was charged to a 50 L vessel and EtOAc (28 L) and dilute 0.22 M HC1 (14 L) were added and the mixture stirred until two clear phases resulted. The aqueous layer was removed and the organic layer filtered to remove any particulate matter. The ethyl acetate was reduced to about 8 L and then heptane (15.6 L) was added over 1 h and the liquors sampled to check for appropriate losses. The solid was isolated by filtration, washed with heptane :ethyl acetate (3: 1, 4 L) and dried on the filter under nitrogen to give 2.81 kg of acid 5. m.p. 167.5 C. NMR (400 MHz, d6-DMSO): delta 12.09 (br s, 1H)S 8.04 (s, 1H), 7.62 (d, 1H, J = 8.4 Hz), 7.58 (d, 1H, J – 1.2 Hz), 7.49 (dd, 1H, J = 8.4, 1.2 Hz), 2.41 (s, 3H). 13C NMR (100.6 MHz, d6-DMSO): delta 168.0, 139.2, 136.4, 135.8, 132.5, 130.3, 128.7, 124.8, 20.9. HRMS (ESI): m/z [M+ + H] calcd for C]0H9N3O2: 204.0773; found: 204.0781

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MERCK SHARP & DOHME LIMITED; BAXTER, Carl, A.; CLEATOR, Edward; KRSKA, Shane, W.; SHEEN, Faye; STEWART, Gavin; STROTMAN, Neil; WALLACE, Debra, J.; WRIGHT, Timothy; WO2012/148553; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Quality Control of 1H-1,2,3-Triazole

In a round-bottomed flask equipped with an overhead magnetic stirrer, reflux condenser, and nitrogen inlet were added 5-chloro-2-iodobenzoic acid (1 .15 g, 4.07 mmol), copper iodide (0.04 g, 0.2 mmol), and CS2CO3 (2.65 g, 8.14 mmol). To these solids were added dioxane (6 mL), water (0.05 mL), then 1 H-1 ,2,3-triazole (0.47 mL, 8.14 mmol), and finally trans-1 ,2-dimethylcyclohexane-1 ,2-diamine (0.3 mL, 0.81 mmol). The mixture was then warmed to 100 C for 4 hrs. Then the mixture was cooled and then MTBE and of water were added. After vigorous mixing, the layers were separated and the bottom aqueous layer was acidified to pH 2 with 6N HCI. The aqueous was then extracted twice with EtOAc. The combined organic layers were dried, filtered, and concentrated. The oil was stirred overnight in EtOAc (8 mL) and the resulting precipitate was removed by filtration affording a first crop of wanted product(100 mg). The mother-liquors were concentrated and purified by FC on S1O2 column (eluting from DCM to DCM : MeOH: 90: 10) to afford a second batch of the desired product that was mixed with the former to afford 5-chloro-2-(2H-1 ,2,3-triazol-2- yl)benzoic acid (p120, 620 mg, y=68%). MS (mlz): 223.9 [MH]+

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CHRONOS THERAPEUTICS LIMITED; MICHELI, Fabrizio; BERTANI, Barbara; GIBSON, Karl Richard; DI FABIO, Romano; RAVEGLIA, Luca; ZANALETTI, Riccardo; CREMONESI, Susanna; POZZAN, Alfonso; SEMERARO, Teresa; TARSI, Luca; LUKER, Timothy Jon; (275 pag.)WO2019/43407; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3179-31-5, name is 1H-1,2,4-Triazole-3-thiol, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 3179-31-5

Step C: Preparation of 3-(2-(4-(2,6-Difluorobenzyloxy)phenyl)-2-oxoethyl)thio-1H-1,2,4-triazole To a solution of 1H-1,2,4-Triazole-3-thiol (0.250 g, 2.4 mmol) and triethylamine (2.50 g, 2.4 mmol) in dry dichloromethane (20 ml) was added 2-Bromo-1-(4-(2,6-difluorobenzyloxy)phenyl)-1-Ethanone (Step B, 0.851 g, 2.4 mmol) in dry dichloromethane (5 ml) at room temperature. The reaction mixture was stirred for 50 minutes and then concentrated in vacuo. The crude residue was taken in EtOAc and washed with 0.1M HCl, and brine. The organic layer was dried over Na2SO4, filtered, concentrated and purified by flash chromatography on silica gel column (chloroform:methanol, 9:1) to provide the title compound. 1H NMR (270 MHz, CDCl3): 4.5 (s, 2H); 5.1 (s, 2H); 6.8-7.0 (m, 4H), 7.2 (m, 1H); 7.9 (d, 2H); 8.0 (s, 1H).

According to the analysis of related databases, 3179-31-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Wellstat Therapeutics Corporation; Sharma, Shalini; (66 pag.)US9133073; (2015); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Recommanded Product: 7411-23-6

Intermediate 2 -l-methyl-lH-l,2,4-triazole To 3,5-dibromo-lH-l,2,4-triazole (1.0 g, 4.41 mmol) in DMF (9 mL) was added sodium tert- pentoxide (0.485 g, 4.41 mmol). The mixture was stirred for 10 min at rt under nitrogen atmosphere, lodomethane (0.29 mL, 4.63 mmol) was added and the mixture was stirred at 40C for 2 hours. The mixture was poured onto water and extracted with diisopropylether (2x). The organic phase was washed with water (2x), brine and dried over sodium sulfate. The solvents were evaporated to give the title compound as a solid (0.83 g, 78%). MS (CI) m/z 242 [M+]. XH NMR (500 MHz, CDCI3) delta ppm 3.89 (s, 3 H).

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4, name: 1,2,4-Triazole-3-carboxylic acid

Example 5-5Preparation of ((1R, 3s, 5S)-3-(7-amino-6-isopropyl-3-( 6-phenylpyridin-3- yl)pyrazolo[1,5-a]pyrimidin-5-yl)-8-azabicyclo[3.2.1]octan-8-yl)(4H-1,2,4-triazol-3- yl)methanoneA mixture of 5-((1 R,3s,5S)-8-azabicyclo[3.2.1]octan-3-yl)-6-isopropyl-3-(6- phenylpyridin-3-yl)pyrazolo[1 ,5-a]pyrimidin-7-amine (30 mg, 0.068 mmol), 41-1-1 ,2,4- triazole-3-carboxylic acid (10.1 mg, 0.085 mmoL), EDC (26.0 mg, 0.14 mmoL), HOBt (18.4 mg, 0.14 mmoL) and DIEA (70.9 ul, 0.41 mmoL) in DMF (2 mL) was stirred at room temperature. Purification with prep-LC provided ((1 R,3s,5S)-3-(7-amino-6- isopropyl-3-(6-phenylpyridin-3-yl)pyrazolo[1 ,5-a]pyrimidin-5-yl)-8- azabicyclo[3.2.1]octan-8-yl)(4H-1 ,2,4-triazol-3-yl)methanone, LCMS tR = 2.25 Min (10 min run, UV254nm). Mass calculated for, M+ 533.2, observed LC/MS m/z 533.99 (M+H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1,2,4-Triazole-3-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCHERING CORPORATION; SIDDIQUI, M. Arshad; NAN, Yang; PATEL, Mehul, F.; REDDY, Panduranga Adulla P.; MANSOOR, Umar Faruk; MENG, Zhaoyang; VITHARANA, Lalanthi Dilrukshi; ZHAO, Lianyun; MANDAL, Amit, K.; LIU, Duan; TANG, Shuyi; MCRINER, Andrew; BELANGER, David, B.; CURRAN, Patrick, J.; DAI, Chaoyang; ANGELES, Angie, R.; YANG, Liping; DANIELS, Matthew Hersh; WO2011/90935; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

General procedure: 3-Amino-1,2,4-triazole 8a?f (1.0 mmol), o-hydroxybenzaldehyde9a?e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150¡ãC for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3¡Á1 ml), and dried. Compounds 1a?w were obtainedin a form of white solids.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4922-98-9, its application will become more common.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics