Triazoles

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 626248-56-4, name is 3-(2H-1,2,3-Triazol-2-yl)aniline, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C8H8N4

Step 1 : To a solution of 4-chloro-2-(ethylthio)-6-(methylthio)pyrimidine-5- carbonitrile (930 mg, 1.83 mmol) in DMF (10 mL) was added 3-(2H-l,2,3-triazol-2- yl)aniline (750 mg, 4.69 mmol). After heating at 65 C for 5 h, it was diluted with EtOAc, washed with IN HC1, Sat NaHC03, brine, dried and concentrated to give 4-(3-(2H-l ,2,3- triazol-2-yl)phenylamino)-2-(ethylthio)-6-(methylthio)pyrimidine-5 -carbonitrile as crude product (1.27 g).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 626248-56-4.

Reference:
Patent; PORTOLA PHARMACEUTICALS, INC.; PANDEY, Anjali; XU, Qing; HUANG, Wolin; JIA, Zhaozhong J.; SONG, Yonghong; WO2012/61415; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-88-0, name is 1H-1,2,4-Triazole, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 288-88-0

To a 500 ml three-necked flask, 21.0 g of 1,2,4-triazole was added.And adding 150.0 g of diethylene glycol monomethyl ether and 7.0 g of potassium hydroxide,Heating in an oil bath, controlling the internal temperature at 100-110 C;then,60.0 g of the reaction starting material A was slowly added dropwise, and the dropping time was 1 h.After the completion of the dropwise addition, the mixture was stirred at 100 to 120 C for 10 hours, and the reaction of the starting material A was monitored by TLC.Then, the reaction solution was allowed to stand to cool to room temperature, incubated in an ice water bath for 1 h, suction filtration, and the filtered mother liquor was collected and applied, and the filter cake was taken.Rinse with 50 ml of a mixed solvent of n-hexane and petroleum ether.Drying in vacuo, the product quality of tebuconazole is 68.6g.The purity was 98.2%, and the total yield was 92.1%.The tebuconazole product characterization data is the same as in Example 1.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-88-0.

Reference:
Patent; Shanghai Sheng Nong Biochemical Goods Co., Ltd.; Ye Zhenjun; Wang Tao; Xu Haiyan; Bi Qiang; Han Haiping; (6 pag.)CN109705048; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., category: Triazoles

[0680] Compound 3a (7.0 mg, 16 f.tmol) was combinedwithDMF (0.5 mL), lH-1,2,3-triazole-5-carboxylic acid (2.0mg, 18 flillOl), HATU (6.8 mg, 18 flillOl) and DIPEA (8.5 f.LL,49 f.tmol). The mixture was stirred for 30 minutes after whichtime LCMS showed the desired product formation. The solutionwas concentrated in vacuo to yield Compound 4a whichwas used directly in the next step.

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 41253-21-8,Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 46′ 2-(lH-l,2,4-triazol-l-yl)benzonitrile: A suspension of 2-fluorobenzylnitrile(3.0 g, 25 mmol) and 1,2,4-triazole sodium complex (2.4 g, 27 mmol) were stirred in THF (7 mL) and DMF (14 mL) at 95 C for 18 h. After cooling and concentrating, the product was crystallized from hot CH2Cl2/hexane (1:1) to give the title compound as a white solid (4.25 g, 100% yield). 1H-NMR (300 MHz, CDCl3) delta: 8.74 (IH, s), 8.16 (IH, s), 7.82 (IH, dd, J= 4.9,1.3 Hz), 7.77-7.25 (2H, m), 7.57-7.51 (IH, m). LCMS [M+H]+ calcd for C9H7N4: 171.06; found: 171.12.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Sodium 1,2,4-triazol-1-ide, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2007/58646; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C8H8N4

3-Phenyl-1,2,4-triazol-5-amine (12, 3.20 g, 20 mmol) was dissolved in cold DMF (8 mL). Carbondisulphide (1.2 mL, 20 mmol) was added drop-wise, followed by 10 N KOH solution (2 mL, 20 mmol).The reaction mixture was stirred for 1 h on an ice-bath. Iodomethane (1.25 mL, 20 mmol) was added,and stirring was continued for 10 min. Subsequently, the ice-bath was removed and the reactionmixture was stirred for 2 h. Cold water (15 mL) was added to the mixture, the yellow precipitate wasfiltered, washed with water, dried and recrystalized from EtOH. Yield 80 mg, 32%; mp 207-209 C(EtOH). 1H-NMR (300 MHz, DMSO-d6): 2.63 (3H, s, SMe), 7.47-7.57 (3H, m, H-30, H-40 and H-50),8.03 (2H, dd, J = 6.8, 3.0 Hz, H-20 and H-60), 8.64 (2H, s, NH2). 13C-NMR (75 MHz, DMSO-d6): 18.8,126.6 (2C), 128.8 (2C), 129.1, 130.6, 157.5, 158.8, 199.5. Combustion elemental analysis calculated forC10H10N4S2: C, 47.98; H, 4.03; N, 22.38. Found: C, 48.06; H, 4.12; N, 22.14.

The synthetic route of 5-Phenyl-1H-1,2,4-triazol-3-amine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Junaid, Ahmad; Lim, Felicia Phei Lin; Zhou, Yvonne Peijun; Chui, Wai Keung; Dolzhenko, Anton V.; Molecules; vol. 24; 8; (2019);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 135242-93-2,Some common heterocyclic compound, 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

b N,N-Diethyl-N-[6-(1-methyl-1 H-1,2,4-triazol-3-ylmethoxy)-3-phenyl-1,2,4-triazolo[4,3-b]pyridazin-7-yl]amine To a solution of N-(6-chloro-3-phenyl-1,2,4-triazolo[4,3-b]pyridazin-7-yl)-N,N-diethylamine (180 mg, 0.33 mmol) and (1-methyl-1 H-1,2,4-triazol-3-yl)methanol (68 mg) in dry DMF (5 ml) was added sodium hydride (60% dispersion in oil, 34 mg, 0.36 mmol). The mixture was stirred at room temperature for 3 hours. The reaction mixture was diluted with water (50 ml) and extracted with dichloromethane (3*25 ml). The combined extracts were washed with brine, dried over magnesium sulphate, filtered and evaporated. The solid was recrystallized from ethyl acetate, and collected by filtration to afford the title pyridazine (81 mg, 36%). 1H NMR (500 MHz, DMSO-d6) delta1.08 (6 H, t, J=8.5 Hz), 3.31 (4 H, q, J=8.5 Hz), 3.87 (3 H, s), 5.50 (2 H, s), 7.22 (1 H, s), 7.47-7.59 (3 H, m), 8.37 (2 H, d, J=8.5 Hz), 8.51 (1 H, s). MS (ES+) 379 [MH]+.

The synthetic route of 135242-93-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck Sharp & Dohme Limited; US6255305; (2001); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, belongs to triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C3H6N4

To a solution of 3-methyl- lH-l ,2,4-triazol-5-amine (150 mg, 1.52 mmol) in diphenyl ether (2 ml) was added ethyl 3-(l -acetyl- lH-indazol-5-yl)-3- oxopropanoate (710 mg, 2.59 mmol), TsOH (1 1 mg, 0.06 mmol), and the mixture was stirred for 1 h at 170C. The resulting solution was diluted with petroleum ether (8 ml), and solids were collected by filtration and washed with ethyl ether (3 ml) to afford 5-(l -acetyl- lH-indazol-5-yl)-2-methyl-[l ,2,4]triazolo[l ,5-fl]pyrimidin- 7(4H)-one as a crude brown solid(100 mg, crude). LC/MS (ES, m/z): [M+H]+ 309.0

The synthetic route of 4923-01-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BIOENERGENIX; MCCALL, John; KELLY, Robert, C.; ROMERO, Donna, L; WO2014/66743; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, These common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 1 3,5-Dibromo-lH-l,2,4-triazole lH-l,2,4-Triazole (3.9 g, 56 mmol) was mixed in water (50 mL) and DCM (15 mL) at 0C. A solution of dibromine (6.1 mL, 119 mmol) in DCM (15 mL) and a solution of sodium hydroxide (6.78 g, 169 mmol) in water (20 mL) were added dropwise simultaneously while keeping the reaction temperature below 20C. The mixture was stirred at ambient temperature over night. Hydrochloric acid (cone, 2.0 mL, 66 mmol) was added. The solid was isolated by filtration, washed with water and dried under vacuum to yield the title compound as a solid (8.3 g, 65%). MS (ESI ) m/z 224 [M-H]”.

Statistics shows that 1H-1,2,4-Triazole is playing an increasingly important role. we look forward to future research findings about 288-88-0.

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6523-49-5, HPLC of Formula: C8H8N4

3 (160 mg, 1.00 mmol), MeOH (30 mL), Tnt-i (also called Tnt-A, see above 900 mg,1.25 mmol), AcOH (Cat.), NaCNBH3 (1.5 eq), RI, 20 h. Work up and column purification afforded 700 mg of 4.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(1,2,4-Triazol-1-yl)aniline, and friends who are interested can also refer to it.

Reference:
Patent; UNITHER VIROLOGY, LLC; RAMSTEDT, Urban; WARFIELD, Kelly Lyn; TRESTON, Anthony; (147 pag.)WO2016/73652; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole, A new synthetic method of this compound is introduced below., Computed Properties of C4H7N3

(S)-3-Bromo-7-chloro-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H- pyrrolo[2,3-b:4,5-b’]dipyridine (300 mg, 0.657 mmol), l,4-dimethyl-lH-l,2,3-triazole (77 mg, 0.788 mmol), Me4NOAc (87 mg, 0.657 mmol), and PdCl2(PPh3)2 (32.3 mg, 0.046 mmol) were weighed into a vial, and 12 mL NMP was added, and the air was replaced with argon. The sealed reaction vial was heated at 100 C with stirring overnight. The next morning, LC/MS showed the mono-alky lated product as the major peak and a significant amount of the dialkylated product. It was cooled to room temperature and diluted with EtOAc and washed twice with brine. The organic layer was dried over MgS04, and concentrated to obtain a crude mixture. The crude material was purified via preparative LC/MS with the following conditions: Column: XBridge C18, 19 x 200 mm, 5-muiotaeta particles; Mobile Phase A: 5:95 ACN: water with 10-mM NEUOAc; Mobile Phase B: 95:5 ACN: water with 10-mM NH4OAc; Gradient: 20-60% B over 15 min, then a 5- min hold at 100% B; Flow: 20 mL/min. Fractions containing the title compound were combined and dried via centrifugal evaporation. Estimated purity by LC/MS analysis was 99%. An analytical LC/MS injection was used to determine the final purity. Conditions: Column: Waters BEH CI 8, 2.0 x 50 mm, 1.7-muiotaeta particles; Mobile Phase A: 5:95 ACN:water with 10 mM NH4OAc; Mobile Phase B: 95:5 ACN:water with 10 mM NH4OAc; Temperature: 50 C; Gradient: 0%B, 0-100% B over 3 min, then a 0.5-min hold at 100% B; Flow: 1 mL/min; Detection: UV at 220 nm; RT = 1.51 min, LC/MS (M+H) = 534.5. NMR (500MHz, DMSO-c e) delta 8.82 (d, J=8.1 Hz, 1H), 8.67 (s, 1H), 8.57 (br. s., 1H), 7.77 – 7.71 (m, 3H), 7.35 – 7.29 (m, 2H), 7.27 – 7.21 (m, 1H), 6.06 (br. s., 1H), 4.38 (s, 3H), 4.03 (s, 3H), 3.90 (s, 1H), 3.74 (d, J=10.6 Hz, 1H), 3.62 (br. s., 1H), 3.40 (s, 1H), 3.24 (t, J=11.2 Hz, 1H), 2.54 (s, 3H), 2.31 (s, 3H), 1.62 (br. s., 1H), 1.51 – 1.39 (m, 1H), 1.35 – 1.21 (m, 1H), 1.14 (d, J=12.5 Hz, 1H); LC/MS (M+H) = 534.3 [Column: Waters Aquity BEH CI 8 2.1 X 50 mm 1.7u; Mobile Phase A: water with 0.05% TFA; Mobile Phase B: ACN with 0.05% TFA; Temperature: 40 C; Gradient: 2- 98% B over 1.5 min; Flow: 0.8 mL/min].

The synthetic route of 60166-43-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; NORRIS, Derek J.; VACCARO, Wayne; DEBENEDETTO, Mikkel V.; DEGNAN, Andrew P.; DELUCCA, George V.; DESKUS, Jeffrey A.; HAN, Wen-Ching; KUMI, Godwin Kwame; SCHMITZ, William D.; STARRETT, John E., JR.; HILL, Matthew D.; HUANG, Hong; (563 pag.)WO2016/183118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics