Triazoles

Synthetic Route of 23579-79-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 23579-79-5 name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Bis(triphenylphosphine)palladium (II) chloride (2.487 mg, 3.54 .mol) was added to astirred mixture of 3-(tributylstannyl)-7-(triisopropylsilyl)-[1,2,3]triazolo[1,5-a]pyridine(10, 100 mg, 0.18 mmol) and 3,5-dibromo-1-methyl-1H-1,2,4-triazole (42.7 mg, 0.18mmol) and lithium chloride (22.53 mg, 0.53 mmol) dissolved in DME (1 mL) anddegased and purged with argon. The resulting mixture was heated at 130 C for 35minutes in the microwave. The mixture was evaporated under reduce pressure and theresidue was purified by preparative HPLC using a Waters X-Bridge reverse-phasecolumn (C-18, 5 microns silica, 19 mm diameter, 100 mm length, flow rate of 40 ml /minute) and decreasingly polar mixtures of water (containing 0.2% ammoniumcarbonate) and acetonitrile as eluent. The fractions containing the desired compound wereevaporated to dryness to afford 3-(3-bromo-1-methyl-1H-1,2,4-triazol-5-yl)-7-(triisopropylsilyl)-[1,2,3]triazolo[1,5-a]pyridine (42.4 mg, 55%) as a white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Article; Germain, Herve; Harris, Craig S.; Lebraud, Honorine; Tetrahedron Letters; vol. 52; 48; (2011); p. 6376 – 6378;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 202931-88-2, These common heterocyclic compound, 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 5a: (3-(4-(1H-Pyrazol-1-yl)benzyl)-4-chloro-2-methoxyquinolin-6-yl)(1-methyl-1,2,3-triazol-5-yl)methanolA solution of n-butyliithium in hexanes (1.6 M, 0.71 mL, 1.1 mmol) was added dropwise to a stirring solution of 3-(4-(1H-pyrazol-1-yl)benzyl)-6-bromo-4-chloro-2-methoxyquinoline (490 nig, 1.1 mmol, Intermediate 4: step d) in tetrahydrofuran (11 mL) at -78 C. After 2 minutes, a solution of 1-methyl-1H-1,2,3-triazole-5-carbaldehyde (140 mg, 1.1 mmol, Intermediate 18) in tetrahydrofuran (1 mL) was added dropwise. After 5 minutes, the flask was placed into an ice-water bath. After 1 hour, water (10 mL) and ethyl acetate (60 mL) were added. The biphasic mixture was stirred for 10 minutes. Half-saturated aqueous sodium chloride solution (50 mL) was added and the layers were separated. The organic layer was dried with sodium sulfate and the dried solution was filtered. Silica, gel (4 g) was added to the filtrate and the mixture was concentrated by rotary evaporation to afford a free-flowing powder. The powder was loaded onto a silica, gel column for flash column chromatography purification. Elution with 100% hexanes initially, grading to 100% ethyl acetate provided the title compound as a white foam which was impure. The foam was suspended in methanol (20 mL) and the suspension was sonicated for 5 minutes. The solids were collected by filtration and rinsed with methanol (5 mL). The collected solids were dried to provide the title compound as a white solid. 1H NMR (600 MHz, DMSO-d6) delta ppm 8.42 (d, J = 2.5 Hz, 1H), 8.21 (d, J = 1.8 Hz, 1H), 7.86 (d, J = 8.6 Hz, 1H), 7.75-7.71 (m, 2H), 7,72-7.67 (m, 2H), 7.37-7.32 (m, 3H), 6.55 (d, J = 5.2 Hz, 1H), 6.53-6.49 (m, 1 H), 6.22 (d, J = 5.2 Hz, 1H), 4.30 (s, 2H), 4.04 (s, 3H), 3.97 (s, 3H); MS (ESI): mass calcd. for C24H21ClN6O2; 460.1 ; m/z found, 461.1 [M+H]+.(3-(4-(1H-Pyrazol-1-yl)benzyl)-4-chloro-2-methoxyquinolin-6-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was purified by chiral SFC (Chiralpak A, 5 mum, 250 x 20 mm, mobile phase: 55% CO2, 45% methanol) to provide two enantiomers. Each enantiomer was further purified by preparative liquid chromatography (stationary phase: irregular 1 5-40 mum, 30 g Merck, mobile phase: 95% dichloromethane, 5% methanol). The first eluting enantiomer off the chiral column was Example 5b: 1H NMR (400 MHz, CDCl3) delta ppm 8.17 (d, J = 2,3 Hz, 1H). 7.90 – 7.82 (m, 2H), 7.68 (d, J = 1.7 Hz, 1H), 7.60 – 7.53 (m, 3H), 7.41 (d, J = 1.5 Hz, 1H), 7.40 – 7.33 (m, 2H), 6.46 – 6.39 (m, I H), 6.14 (s, 1H), 4.33 (s, 2H), 4.10 (s, 3H), 3.99 (s, 3H), 2.92 (br s, 1H): MS (ESI): mass calcd. for C24H21ClN6O2, 460.1 ; m/z found, 460.9 [M+H]+and the second eluting enantiomer was Example 5c: 1H NMR (400 MHz, CDCl3) delta ppm 8.17 (d, J = 1.9 Hz, 1H), 7.90- 7.82 (m, 2H). 7.68 i d. J = 1.7 Hz, 1H), 7.60 – 7.52 (m, 3H), 7.41 (s, 1H), 7.40 – 7.33 (m, 2H). 6.46 – 6.40 (m, 1H), 6.14 (s, 1H), 4.33 is. 2H), 4.10 (s, 3H), 3.99 (s, 3H), 2.92 (br s, 1H); MS (ESI): mass calcd. for C24H21ClN6O2, 460.1 ; m/z found, 460.9 [M+H]+.

Statistics shows that 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde is playing an increasingly important role. we look forward to future research findings about 202931-88-2.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi, A.; BARBAY, Kent; EDWARDS, James, P.; KREUTTER, Kevin, D.; KUMMER, David, A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald, L.; WOODS, Craig, R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell, D.; WO2015/57206; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 15988-11-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of malononitrile 1 (1 mmol), aldehyde 2(1 mmol), 4-phenylurazole 3 (1 mmol), and zeolite (0.05 g)was placed in a mortar. The reaction mixture was then heatedat 80 C for 60 min. After completion of the reaction as monitored by TLC analysis, the reaction mixture was cooled,and the solid was dissolved in acetone (15 mL), filtered and evaporated under vacuum to give the product, which was crystallized from ethanol to afford pure compound 4.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Phenyl-1,2,4-triazolidine-3,5-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Nejat, Razieh; Mahjoub, Mohammad Amin; Hekmatian, Zahra; Javidi, Mohammad Amin; Babashah, Sadegh; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1133 – 1143;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 31250-99-4, A common heterocyclic compound, 31250-99-4, name is 1-Trityl-1H-1,2,4-triazole, molecular formula is C21H17N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) A solution of 1-trityl-1,2,4-triazole (10.0 g, prepared as described in Example 1) and N,N,N’,N’-tetramethylethylenediamine (3.8 g) in dry tetrahydrofuran (250 ml) was cooled to -70 C. under nitrogen. n-Butyllithium (22.2 ml, 1.6M solution in hexane) was added dropwise, with stirring, at such a rate that the internal temperature was maintained below -60 C. The red solution was stirred at -70 C. for twenty-five minutes, then treated dropwise with diethyl 3-oxo-propane phosphonate (6.20 g, prepared by formic acid deacetalisation of the diethyl acetal, DE 2517448, and also described in, for example, Tetrahedron 1981, 37, 1377) whilst maintaining the temperature at that level. The mixture was stirred for two and a half hours at -70 C. then quenched, at that temperature, with saturated aqueous ammonium chloride solution. It was extracted with ethyl acetate and the organic phase washed with brine, dried over magnesium sulphate, and evaporated under reduced pressure to give crude diethyl 3-hydroxy-3(1-trityl-1,2,4-triazol-5-yl)propane phosphonate (10.81 g). Chromatography on silica, using dichloromethane-ethanol (19:1) as eluant, gave pure material, m.p. 154-155 C. NMR (CDCl3): delta1.3(6H,t), 1.9(2H,m), 1.7(2H,m), 3.1(1H,br), 4.0(4H,m), 4.1(1H,t), 7.1-7.3 (15H,m), 7.9(1H,s). M/S: M+ 505.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C2HBr2N3

Step 1 : A mixture of A-21.1 (2.00 g, 1 1 .0 mmol), A-21.2 (3.88 g, 17.1 mmol), Cul (0.13 g, 0.68 mmol), A-21.3 (0.15 mL, 1 .03 mmol) and K2C03 (2.36 g, 17.1 mmol) in dry DMF (10 mL) is heated to 120°C by microwave for 40 min. The mixture is poured into water and extracted with Et20. The aq. phase is acidified with HCI (4M aq. solution) and extracted with EA. The combined organic phases are dried and concentrated to give the crude product which is purified by flash column chromatography on silica gel (using a solvent gradient from 100percent EA to EA/MeOH = 9/1 ) to provide 3.6 g of A-21.4. APCI+/-: 365 [M+H]+; HPLC (Rt): 1.10 min (method (0304) N).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 15294-81-2.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta; NICHOLSON, Janet Rachel; PEKCEC, Anton; SCHEUERER, Stefan; (69 pag.)WO2017/178341; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, A new synthetic method of this compound is introduced below., Quality Control of 4-Phenyl-1,2,4-triazolidine-3,5-dione

General procedure: A mixture of dimedone (1 mmol), aldehyde or isatin (1 mmol) and 4-phenylurazole (1 mmol), and catalyst (0.01 g, 5 mol%) in water (5 mL) was refluxed. After completion of the reaction that was monitored by TLC (EtOAc:n-hexane, 1:3), the reaction mixture was cooled to room temperature. Then, the precipitated product was filtered and washed with water and cooled with ethanol to afford the pure product.

The synthetic route of 15988-11-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Seyyedhamzeh, Mozhdeh; Shaabani, Shabnam; Hamidzad Sangachin, Mona; Shaabani, Ahmad; Research on Chemical Intermediates; vol. 42; 4; (2016); p. 2845 – 2855;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

Step C: (2-(2H-1,2,3-triazol-2-yl)phenyl)((1S,4R,6R)-6-((3-(trifluoromethyl)pyridin-2-yl)oxy)-2-azabicyclo[2.2.1]heptan-2-yl)methanone To the title compound of step B (25 mg) and intermediate A-1 (18 mg, 0.093 mmol) in DMF (0.8 mL) was added DIPEA (75 muL, 0.44 mmol) and HATU (36 mg, 0.093 mmol), and the reaction mixture was stirred at room temperature for 1 h. The reaction was quenched by the addition of H2O and the aqueous layer was extracted with EtOAc (3*). The combined organics were washed with H2O, 5% aqueous LiCl, brine, dried with Na2SO4, filtered, and concentrated. Purification via silica gel chromatography (0-60% EtOAc in hexanes) gave the title compound (29 mg). MS (ESI) mass calcd. C21H18F3N5O2, 429.1; m/z found 430.1 [M+H]+. 1H NMR (400 MHz, Chloroform-d, Compound present as a mixture of rotamers, (0.76:0.24), major rotamer reported) delta 7.93-7.82 (m, 4H), 7.81 (s, 2H), 7.07 (dd, J=7.7, 1.5 Hz, 1H), 6.93-6.86 (m, 1H), 6.75 (td, J=7.6, 1.2 Hz, 1H), 5.04 (dt, J=10.2, 3.4 Hz, 1H), 4.15-4.04 (m, 1H), 3.66 (dt, J=10.9, 3.3 Hz, 1H), 3.38 (dd, J=10.9, 1.4 Hz, 1H), 2.66-2.60 (m, 1H), 2.27-2.15 (m, 1H), 1.48 (dt, J=13.3, 3.6 Hz, 1H), 1.44-1.37 (m, 1H), 1.36-1.28 (m, 1H).

The synthetic route of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; GELIN, Christine F.; LEBOLD, Terry P.; SHIREMAN, Brock T.; US2014/275118; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 6818-99-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6818-99-1, name is 3-Chloro-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

500 mg of intermediate 4, 60% sodium hydride(Oily) 60 mg, and DMF 2.5 mL,Under ice-cooling, 141 mg of 3-chloro-1 H-1,2,4-triazole was added. After stirring for 2.5 hours under ice cooling,Saturated multilayer aqueous solution was poured into the reaction mixture,And extracted with ethyl acetate. The organic layer was washed with water,And washed with saturated brine,And dried over anhydrous sodium sulfate.The obtained organic layer was dried under reduced pressure.The obtained residue was subjected to silica gel chromatography,435 mg of the present compound 9 described below was obtained.

The synthetic route of 3-Chloro-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sumitomo Chemical; Ikari, Kaori; (123 pag.)JP2019/6686; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 217448-86-7,Some common heterocyclic compound, 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 6: Preparation of Rufinamide Methyl l-(2, 6-difIuorobenzyl)-lH-l,2,3-triazole- 4-carboxylate (19 g) was dissolved in methanol (285 ml) at 65-70C. Added dropwise 20% liq NH3 (150 ml) over a period of 30 min. The mixture was then stirred at 65-70C for 5-6 hours. After the completion of reaction, as monitored by TLC, the reaction mixture was cooled to room temperature. The solid was filtered, washed with water and dried under vacuum at 65C to give rufinamide (13.3 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, its application will become more common.

Reference:
Patent; AARTI INDUSTRIES LIMITED; DESAI, Parimal, Hasmukhlal; SALVI, Narendra, Jagannath; SUBRAMANIAN, Seetharaman; WO2014/72992; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, belongs to triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of 4-Phenyl-1,2,4-triazolidine-3,5-dione

General procedure: Dimedone (0.14 g, 1 mmol), benzaldehyde (0.1 g, 1 mmol), and 4-phenylurazole (0.177 g, 1 mmol) were mixed with PEG-SO3H (0.6 g, 0.1 mmol) and the obtained mixture was stirred magnetically at 80 C for 40 min. After the completion of the reaction warm water (20 mL) was added and the mixture stirred for about 5 min. The insoluble crude product was filtered and recrystallized from EtOH/H2O 4:1 and the pure product was obtained (0.352 g, 91%). In order to recover the catalyst, the filtrate was dried under reduced pressure and recovered catalyst was washed with diethyl ether and reused after drying under reduced pressure. The equivalent procedure was used for the synthesis of triazolo[1,2-a]indazole-tetraones.

The synthetic route of 15988-11-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hasaninejad, Alireza; Zare, Abdolkarim; Shekouhy, Mohsen; Tetrahedron; vol. 67; 2; (2011); p. 390 – 400;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics