Triazoles

Application of 7170-01-6, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%).: _Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 16681-65-5

To a flask containing 1-methyl-1H-1,2,3-triazole (111 mg, 1.34 mmol) was added THF (10 mL) and the solution was cooled to -45 C. using a CH3CN-CO2 bath. n-BuLi (2.5 M in hexanes, 0.5 mL, 1.25 mmol) was added dropwise to provide a white suspension. The suspension was stirred at -45 C. for 25 minutes. A pre-warmed THF solution of (2,4-dichloro-3-(2,2,2-trifluoroethyl)quinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (470 mg, 1.17 mmol in 7 mL THF, Intermediate 70) was introduced at -45 C. The reaction temperature was allowed to warm gradually to room temperature over 70 minutes then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc (3*40 mL), and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. Chromatography on silica gel (2% MeOH-DCM increasing to 8% MeOH) afforded the title compound as a tan amorphous solid. MS (ESI): mass calcd. for C20H17Cl2F3N6O, 484.1. found, 485.0 (M+H)+. 1H NMR (500 MHz, CDCl3) delta ppm 8.60 (s, 1H), 8.44-8.40 (m, 2H), 7.95 (d, J=8.8 Hz, 1H), 7.62 (dd, J=8.8, 1.8 Hz, 2H), 6.95 (s, 1H), 5.89 (s, 1H), 4.05 (q, J=9.6 Hz, 2H), 3.89 (s, 3H), 3.32 (s, 3H).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1-Methyl-1H-1,2,3-triazole ,and how the biochemistry of the body works.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 4928-87-4, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step D – Synthesis ((1R,3s,5S)-3-(7-amino-6-(methylsulfonyl)-3-(6-phenylpyridin-3- yl)pyrazolo[1,5-a]pyrimidin-5-yl)-8-azabicyclo[3.2.1]octan-8-yl)(1H-1,2,4-triazol-3- yl)methanoneA mixture of 1 H-1 ,2,4-triazole-3-carboxylic acid (29.4 mg, 0.26 mmol), EDCI (76.7 mg, 0.4 mmol), and 1-hydroxybenzotriazole (27 mg, 0.2 mmol) in DMF (2 mL) was stirred at room temperature for 10 min. The 5-(8-azabicyclo[3.2.1]octan-3-yl)-6- (methylsulfonyl)-3-(6-phenylpyridin-3-yl)pyrazolo[1 ,5-a]pyrimidin-7-amine HCI (0.2 mmol) was added, followed by N,N-diisopropylethylamine (0.17 mL, 1 mmol). It was stirred further for 20 min at room temperature at which time LC/MS analysis confirmed full consumption of starting material. This crude compound was purification by HPLC to afford the desired title product.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1,2,4-Triazole-3-carboxylic acid.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCHERING CORPORATION; SIDDIQUI, M. Arshad; NAN, Yang; PATEL, Mehul, F.; REDDY, Panduranga Adulla P.; MANSOOR, Umar Faruk; MENG, Zhaoyang; VITHARANA, Lalanthi Dilrukshi; ZHAO, Lianyun; MANDAL, Amit, K.; LIU, Duan; TANG, Shuyi; MCRINER, Andrew; BELANGER, David, B.; CURRAN, Patrick, J.; DAI, Chaoyang; ANGELES, Angie, R.; YANG, Liping; DANIELS, Matthew Hersh; WO2011/90935; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of 1-fluoro-2-methoxy-4-nitrobenzene (2.5 g, 14.60 mmol) in DMF (25 mL) under an argon atmosphere were added potassium carbonate (4 g, 29.20 mmol) and 3-methyl-1H-1, 2, 4-triazole (1.2 g, 14.60 mmol) at room temperature. The reaction mixture was stirred at 85 oC for 16 h in a sealed tube. After consumption of the starting material (monitored by TLC), the reaction mixture was diluted with water (100 mL) and extracted with EtOAc (2 x 50 mL). The combined organic extracts were dried over sodium sulfate, filtered and concentrated in vacuo. The crude material was purified by column chromatography using 15-25% EtOAc:hexane to afford 1-fluoro-2-methoxy-4-nitrobenzene (1.2 g, 35%) as an off-white solid. 1H-NMR (CDCl3, 400 MHz): delta 8.87 (s, 1H), 8.10 (d, 1H), 8.00-7.97 (m, 2H), 4.10 (s, 3H), 2.50 (s, 3H); LCMS: 234.9 (M+1); (column; Ascentis Express C-18 (50 × 3.0 mm, 2.7 mum); RT 2.02 min. 0.025% Aq TFA+5% ACN: ACN+5% 0.025% Aq TFA; 1.2 mL/min); TLC: 30% EtOAc:hexane (Rf: 0.2).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; FORUM PHARMACEUTICALS INC.; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; MCRINER, Andrew, J.; WO2015/109109; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 3641-08-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 3641-08-5, name is 2H-1,2,4-Triazole-3-carboxamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 500 ml jacketed flask equipped with a mechanical stirrer, a temp probe, a circulation bath and a positive nitrogen atmosphere set up was placed with 1,2,4-triazole-3-carboxamide 25.3 gm (0.112 mole), 1,4-dioxane 225 gm, and pyridine 72.8 gm (0.92 mole). The mixture was chilled to -6.8 C. Trifluoroacetic anhydride 107.1 gm (0.51 mole) was added dropwise at -1.3 to -6.8 C. in 10 min. Then the mixture was warmed to ambient temperature and stirred for 30 min. Without work up, a sample was taken for HPLC analysis. The chromatogram showed that the product contained 93% 3-CNT and 0.2% 3-CAT.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 2H-1,2,4-Triazole-3-carboxamide.

Reference:
Patent; Ampac Fine Chemicals LLC; US2009/292122; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 584-13-4, name is 4H-1,2,4-Triazol-4-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 584-13-4

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

If you are hungry for even more, make sure to check my other article about 584-13-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-36-8

In the reactor,Add 90% acetone (volume fraction) 400mL,Stirring,26.2 g of compound (01)Then 34.5 g of potassium carbonate powder was added,0.38 g copper iodide (CuI),1,2,3-triazole.External temperature was raised to 70 ,During the heating process, a large amount of gas is generated,The reaction was stirred at reflux for 5 hours.The reaction mixture was then distilled under reduced pressure at 40 C,When the reaction system is more viscous, add 45mL of water and continue to reduce the steam to distillate without acetone (no acetone in the gas phase). Distilled residue was added 300mL of water, 25% sulfuric acid was added dropwise at room temperature to adjust the pH to 1-2, a yellow suspension.Stir for 30 minutes, filter, and the solids are washed three times with water, 60 mL each. The resulting solid was dried to dryness at 70 C in vacuo,Have pale green solid 19.48g,Compound (1), purity 95.06%.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Liu Guangyuan; Fan Yuping; (6 pag.)CN104557744; (2017); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-67-7, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-67-7, name is 4-Bromo-2-methyl-2H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a microwave tube equipped with a stifling bar, (R)-4-((R)-1-((1-cyclopropyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-benzo[d]imidazol-7-yl)oxy)ethyl)pyrrolidin-2-one (120 mg, 0.292 mmol), 4-bromo-2-methyl-2H-1,2,3-triazole (94.5 mg, 0.584 mmol), 1,2-dimethoxyethane (3 mL), 1 N Na2CO3 aqueous solution (0.96 mL, 0.96 mmol) were added, the mixture was bubbled N2 for 5 minutes before Pd(PPh3)4 (33.7 mg, 0.029 mmol) was added. The tube was sealed and heated in microwave at 140 C. for 15 minutes. DCM (200 mL) was added and the resulting mixture was washed with saturated NaHCO3 aqueous solution (20 mL×4), brine (20 mL×1), dried over anhydrous Na2SO4, filtered, removed solvents in vacuo. The resulting residue was passed a ISCO silica gel column (MeOH:DCM=5:95) to give off-white solids, 81.7 mg (yield 76.4%).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 4-Bromo-2-methyl-2H-1,2,3-triazole.

Reference:
Patent; Gilead Scientific Systems, Inc.; Cory, Kevin S; Doo, Jimin; Farrand, Julie; Guerrero, Juan A; Katana, Ashley A; Cato, Daryl; Laisaweed, Scott I; Lee, Jiayao; Lingco, John O; Nicolaus, May; Notte, Gregory; Phyen, Hyeoung-Jung; Sangy, Michael; Sumit, Arun C; Adam J, Surayyah; Stephens, Cork L; Venkatraman, Chandrasekar; Watkins, William J; Yang, Jong Yu; Jabloki, Jeff; Jifel, Shiela; Ro, Jennifer; Lee, Sung H; Jao, Chung Dong; Grove, Jeffery; Su, Jianjun; Blomgren, Peter; Mitchell, Scott A; Shyung, Jin Ming; Chandrasekar, Jayaraman; (460 pag.)KR2016/37198; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 64922-04-9, name is Ethyl 1H-1,2,4-triazole-5-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 64922-04-9

Example 1.10: Preparation of l-ethyl-lH-[l,2,,4~|triazole~3-carboxyric acid methyl ester and 1 -ethyl- IH-[1, 2,4]triazole-5-carboxylic acid methyl esterTo a suspension of IH-[1, 2,4]-triazole-3-carboxylic acid methyl ester (25 g, commercially available) in dry lambdazetaN-dimethylformamide (200 ml) at O0C under an atmosphere of nitrogen was added in portions sodium hydride (60% by weight dispersion in mineral oil) (8.66 g). On complete addition, the mixture was stirred for 1 hour at ambient temperature then re-cooled to O0C and ethyl iodide (15.5 ml) was added. The reaction mixture was stirred for 1 hour, stored for 18 hours then treated with aqueous ammonium chloride (IM) and concentrated to give a yellow oil. The oil was dissolved in chloroform (300 ml), washed with water (100 ml), dried over magnesium sulfate and concentrated. The oil that remained was washed with hexane and then triturated with diethyl ether to give a mixture of l-ethyl-lH-[l,2,4]triazole-3-carboxylic acid methyl ester and 1 -ethyl- IH-[1, 2,4]triazole-5-carboxylic acid methyl ester which was used without further purification.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 64922-04-9

Reference:
Patent; SYNGENTA LIMITED; WO2008/74991; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1001401-62-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 22 2-(2H-1,2,3-Triazol-2-yl)-N-(2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentyl)benzamide Triethylamine (0.099 ml, 0.71 mmol), 3H-[1,2,3]triazolo[4,5-b]pyridin-3-ol (0.039 g, 0.29 mmol) and EDC (0.055 g, 0.29 mmol) were added to a solution 2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentan-1-amine (Intermediate 12; 0.058 g, 0.24 mmol) and 2-(2H-1,2,3-triazol-2-yl)benzoic acid (CAS number 1001401-62-2; 0.054 g, 0.29 mmol) in DCM (3 ml). The reaction was stirred at room temperature for 24 hours and then diluted with DCM (40 ml) and washed with a saturated solution of sodium bicarbonate (10 ml). The organics were dried over magnesium sulfate, filtered through a hydrophobic frit and concentrated in vacuo. The crude product was purified by column chromatography (silica, 0-80% ethyl acetate/petrol) to afford the title compound. 1H NMR (400 MHz, DCM-d2) delta ppm 1.19-1.31 (m, 1H), 1.39-1.49 (m, 1H), 1.50-1.64 (m, 2H), 1.65-1.75 (m, 1H), 1.91-2.02 (m, 1H), 2.48-2.59 (m, 1H), 2.68-2.76 (m, 1H), 3.00-3.08 (m, 1H), 4.36-4.45 (m, 1H), 6.45-6.53 (m, 1H), 7.30-7.34 (m, 1H), 7.37 (s, 1H), 7.48-7.54 (m, 1H), 7.55-7.61 (m, 1H), 7.62-7.66 (m, 1H), 7.71-7.75 (m, 1H), 7.82 (s, 2H) and 8.59-8.62 (m, 1H). MS ES+: 416 Example 23 2-(2H-1,2,3-Triazol-2-yl)-N-(2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentyl)benzamide Prepared according to the procedure for 2-(2H-1,2,3-triazol-2-yl)-N-(2-{[4-(trifluoromethyl)pyridin-2-yl]methyl}cyclopentyl)benzamide (Example 22) except this was then was chirally separated using SFC (Waters prep30/MS system using 20% Ethanol, Daicel IA 10 mm id×250 mm long columns at 30 ml min, 40 C. and 100 bar) to afford the title compound as a single enantiomer. 1H NMR (300 MHz, DCM-d2) delta ppm 1.15-1.35 (m, 1H), 1.35-1.79 (m, 4H), 1.85-2.06 (m, 1H), 2.42-2.63 (m, 1H), 2.64-2.79 (m, 1H), 2.95-3.16 (m, 1H), 4.28-4.53 (m, 1H), 6.44-6.59 (m, 1H), 7.26-7.43 (m, 2H), 7.43-7.68 (m, 3H), 7.69-7.77 (m, 1H), 7.82 (s, 2H), 8.54-8.68 (m, 1H). MS ES+: 416

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1001401-62-2, Happy reading!

Reference:
Patent; Takeda Pharmaceutical Company Limited; Fieldhouse, Charlotte; Glen, Angela; Maine, Stephanie; Fujimoto, Tatsuhiko; Robinson, John Stephen; US2015/232460; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics