Triazoles

Synthetic Route of 64922-04-9, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 64922-04-9, name is Ethyl 1H-1,2,4-triazole-5-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of Intermediate 1: 4-(3-Methanesulfonyloxymethyl-[l,2,4]triazol-l- yl)-piperidine-l-carboxylic acid tert-butyl esterStep 1: 4-(3-Methoxycarbonyl-[l,2,4]triazol-l-yl)-piperidine-l-carboxylic acid tert-butyl ester; To a solution of IH-[1, 2,4]triazole-3-carboxylic acid ethyl ester (1.05 g, 8.23 mmol) in dimethylformamide (50 rnL) was added sodium hydride (60%, 0.395 g, 9.88 mmol). The solution was stirred at room temperature for 20 minutes followed by 1 hour at 70 0C. 4-methanesulfonyloxy-piperidine-l-carboxylic acid tert-butyl ester (2.3 g, 8.23 mmol) was then added in a single portion and heated at 70 0C for 40 hours. The solution was cooled to 0 0C and the salt precipitate was removed by filtration. The filtrate was diluted with dichloromethane and washed with water, brine, dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by flash chromatograph on silica gel with Hexanes and EtOAc to afford the desired product. 1H NMR (CDCl3): 5 8.18 (IH, s), 4.40 (IH, m), 4.22 (2H, m), 3.96 (3H, s), 2.82 (2H, m), 2.12 (2H, m), 1.94 (2H, m), 1.41 (9H, s).

In the meantime we’ve collected together some recent articles in this area about 64922-04-9 to whet your appetite. Happy reading!

Reference:
Patent; METABOLEX, INC.; WO2009/14910; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

To a solution of 2-iodobenzoic acid (3.0 g, 12.1 mmol) in DMF was added 1,2,3- triazole (1.5 g, 21.7 mmol), Cs2CO3 (7.1 g, 21.7 mmol), Cul (114 mg, 0.6 mmol), and trans-N,N?dimethylcyclohexane- 1 ,2-diamine (310 mg, 2.2 mmol). After heating at 120 C for 10 mm in amicrowave reactor, the mixture was cooled to room temperature, diluted with EtOAc, and filtered through Celite. The filtrate was concentrated in vacuo and the crude residue was purified by silica gel chromatography (MeOH in DCM with 0.1% AcOH) to give Intermediate N as the faster eluting isomer. ?H NMR (DMSO-d6, 500MHz) oe 13.05 (brs, 1 H), 8.12 (s, 2H), 7.8 1-7.52 (m, 4H).

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; ROECKER, Anthony, J.; (0 pag.)WO2016/85783; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 956317-36-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride(WSCHCl) (37.4 g, 0.20 mol) was added to a solution of Nethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanaminedihydrochloride (50 g, 0.16 mol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (33.9 g, 0.18 mol), 1-hydroxy-1H-benzotriazolehydrate (HOBtH2O) (26.4 g, 0.20 mol) and triethylamine (TEA)(39.5 g, 0.39 mol) in THF (500 mL) at 0 C, followed by stirring atroom temperature for 20.5 h. The solvent of the reaction solutionwas distilled off under reduced pressure. An aqueous NaHCO3 solutionand EtOAc were added to the resulting residue, followed byextraction with EtOAc. The organic layer was washed with water,and the solvent was distilled off under reduced pressure to yieldthe crude product (72 g). An additional 196.7 g of the crude productwas synthesized using the same method from N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanamine dihydrochloride(140 g, 0.46 mol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoicacid (94.8 g, 0.50 mol). The obtained crude product (268.7 g) wasrecrystallized with heptane and EtOAc. The deposited solid wasthen collected by filtration. The obtained solid was dried by heatingunder reduced pressure to yield the title compound 27e as acolorless powder (217.3 g).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, hurry up and to see.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

Example A32 a) Preparation of intermediate 84 CuI (1.71 g, 8.9 mmol) and N,7V-dimethylethylenediamine (1.91 ml, 17.92 mmol) were added to a mixture of 2-amino-5-iodopyridine (5.03 g, 22.4 mmol), 3-methyl- IH- 1,2,4- triazole (2.42 g, 29.1 mmol), and Cs2CO3 (14.60 g, 44.81 mmol) in DMF (40 ml). The r.m. was heated at 110 0C for 7 h., the r.m. was cooled, EtOAc was added and the mixure was washed with water. The water layer was extracted 5 times with EtOAc. The combined organic layers were dried (MgSO4), filtered and the solvent was evaporated in vacuo. The residue was purified by RP preparative EtaPLC [RP Shandon Etayperprep Cl 8 BDS (8 mum, 250 g, LD. 5 cm); mobile phase: a gradient of (0.25 % NH4HCO3 solution in water)/MeOH/CH3CN]. The product fractions were collected and the solvent was evaporated. Yield: 1.5 g of intermediate 84 (38 %).

If you are hungry for even more, make sure to check my other article about 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; GIJSEN, Henricus, Jacobus, Maria; BISCHOFF, Francois Paul; ZHUANG, Wei; VAN BRANDT, Sven, Franciscus, Anna; SURKYN, Michel; ZAJA, Mirko; BERTHELOT, Didier, Jean-Claude; DE CLEYN, Michel, Anna, Jozef; MACDONALD, Gregor, James; OEHLRICH, Daniel; WO2010/94647; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 956317-36-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1 ,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dirnethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 50% EtOAc in water with 0.1% TFA) to give the desired A-3. A portion of this acid (0.1 1 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 956317-36-5, Happy reading!

Reference:
Patent; MERCK & CO., INC.; WO2009/11775; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

[0861] lH-1,2,3-triazole-4-carboxylic acid (9.8 mg, 87f.tmol) and HATU (36.4 mg, 96 f.tmol) were combined in DMF(3.0 mL) and stirred at room temperature for 15 minutes.Compound 1 ( 40.3 mg, 87 fllllOI) and DIPEA ( 46 flL, 261f.tmol) were added and the resulting solution was stirred atroom temperature for 15 minutes, after which time LCMSindicated desired product formation. The solvent wasremoved in vacuo and the crude residue was purified byreverse phase chromatography to yield Compound a ( 5 .2 mg)as a TFA salt. MS m/z [M+Ht calc’d for C28H33CIFN50 4 ,558.22. found 558.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-[1,2,3]Triazole-4-carboxylic acid ,and how the biochemistry of the body works.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 1455-77-2, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A suspension of 3,5-diamino-1,2,4-triazole (0.1 g, 1 mmol) in absolute EtOH (10 mL) was added to a stirring solution of azo-coupled precursors, Ia-IVa, (2 mmol) in absolute EtOH (50 mL) during a period of 10 min at 60-70 °C. The mixture was heated in water bath for 15 h at 80 °C with stirring. The mixture was filtered whilst hot and the obtained solid was washed with hot ethanol (three time) and then with diethylether. The resulted product was dried in air.

In the meantime we’ve collected together some recent articles in this area about 1455-77-2 to whet your appetite. Happy reading!

Reference:
Article; Khanmohammadi, Hamid; Erfantalab, Malihe; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 86; (2012); p. 39 – 43;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 956317-36-5, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A round bottom flask equipped with a magnetic stirrer bar was successively charged with5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (3.0 g, 14.8 mmol, 1 equiv),N-hydroxysuccinimide (1.84 g, 15.54 mmol, 1.05 equiv), EDC hydrochloride (3.04 g, 15.54 mmol, 1.05 equiv), and dichloromethane (74 mL). The reaction mixture was stirred at ambient temperature for 1.5 h, followed by addition of H20 (74 mL). The aqueous layer was separated and extracted twice with dichloromethane (74 mL). The combined organiclayers were washed in brine, dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure, yielding 2,5 -dioxopyrrolidin- 1 -yl 5 -methyl-2-(2H- 1 ,2,3-triazole-2-yl)benzoate (4.4 g, 99 %) as a brownish solid.?H NMR (500 MHz, CDC13) oe = 7.84 (s, 2H), 7.79 (d, J = 8.25 Hz, 1H), 7.77 (d, J = 1.35 Hz, 1H), 7.52 (dd, J = 1.40, 8.25 Hz, 1H), 2.85 (br s, 4H), 2.48 (s, 3H)?3C NMR (125 MHz, CDC13) oe = 168.9, 162.3, 139.0, 136.7, 136.2, 134.3, 131.2, 124.1,121.4, 25.8, 21.1

In the meantime we’ve collected together some recent articles in this area about 956317-36-5 to whet your appetite. Happy reading!

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 41253-21-8, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Compound (II-1) (48.6mmol) N, N- dimethylacetamide ( 30 mL) And it was dissolved in water (2.3mL), and the temperature was raised to 65C . Here , compound (III-1) (63.3mmol), TMSOB (58.4mmol) and sodium hydroxide ( 12. 0mmol) was added and stirring . After 7 hours , 2 hours reaction is performed by elevating the temperature of the reaction temperature to 85C It was . After completion of the reaction , water was added to the reaction mixture, and the mixture was extracted with toluene to obtain a compound (I-1). 82.0% yield .

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Sodium 1,2,4-triazol-1-ide, hurry up and to see.

Reference:
Patent; KUREHA CORPORATION; SANO, RUMI; SAWA, TOMOHIRO; MASANO, TAIGA; (21 pag.)JP2016/3226; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 930-33-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one, molecular formula is C2H3N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

5-[5-Amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-(5-oxo-4,5-dihydro[1,2,4]triazol-1-yl)benzonitrile (I-A-Q1-002) 2,4-Dihydro[1,2,4]triazol-3-one (11 mg, 0.13 mmol) and potassium carbonate (18 mg, 0.13 mmol) are added to a solution of 5-[5-amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-fluorobenzonitrile (50 mg, 0.11 mmol) in DMF (2 ml). The reaction mixture is stirred at 80 C. for 15 min, cooled to room temperature, poured into water (5 ml) and extracted with ethyl acetate (5 ml). The organic phase is washed with water (5 ml), dried over sodium sulphate and concentrated using a rotary evaporator. Purification by chromatography on silica gel using cyclohexane/ethyl acetate 2/1 to 1/3 gives 5-[5-amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-(5-oxo-4,5-dihydro[1,2,4]triazol-1-yl)benzonitrile (8 mg, 0.016 mmol, 12%).log P(HCOOH): 3.451H NMR (DMSO-d6): 8.28 (d, 1H, J=2.3 Hz), 8.24 (d, 1H, J=1.2 Hz), 8.12 (dd, 1H, J=8.8 and 2.4 Hz), 7.87 (d, 1H, J=8.8 Hz), 7.79 (s, 1H), 7.69 (s, 1H), 7.60 (s, 1H), 5.96 (s, 2H)

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazol-3(2H)-one.

Reference:
Patent; Bayer Crop Science AG; US2011/190365; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics