Triazoles

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 3,5-Dibromo-1H-1,2,4-triazole

To a solution of 3,5-dibromo-1H-1,2,4-triazole (Int-1, 5.0 g, 22.0 mmol) in DMF (70 mL) was added sodium hydride (793 mg, 33.1 mmol) at 0C under argon atmosphere. After complete addition reaction was allowed to stir at 25C for 30 min. Then 2-iodopropane (2.6 mL, 26.4 mmol) was added followed by stirring at 40C for 4 h. After complete consumption of starting material (as monitored by TLC) reaction mixture was poured into ice-water followed by extraction with MTBE. The organic layer was separated and dried over sodium sulphate. Solvent was evaporated under reduced pressure to afford the title compound as yellow liquid (5.4 g, crude) which was sufficiently pure for use in next step. 1H NMR (DMSO-d6, 400 MHz): 1.39 (d, J = 6.6 Hz, 6 H), 4.64-4.71 (m, 1 H). MS (ES+) m/z 270.0 [M+H].

If you are hungry for even more, make sure to check my other article about 7411-23-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 956317-36-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The 5 – methyl -2 – (2 H – 1, 2, 3 – triazole -2 – yl) benzoic acid (2.03 g, 10 mmol) is added to the 100 ml round bottom flask in the single port, for anhydrous dichloromethane (20 ml) dissolved, then slowly adding thionyl chloride (15 ml, 200 mmol) and pyridine (0.15 ml, 2 mmol). The reaction solution gradually heating to reflux, the reaction 3 hours after stopping the reaction, cooling, slowly evaporating the solvent under reduced pressure, the obtained product can be directly into the next step.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 956317-36-5, Happy reading!

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Zhang Yingjun; Xue Yaping; Lao Jinhua; Nie Biao; Xu Juan; (35 pag.)CN107759620; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 13273-53-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixture of 2-morpholino-N-(6-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)isoquinolin-3-yl)acetamide (LXV) (675.4 mg, 1.7 mmol), 4-bromo-1-methyl-1H-1,2,3-triazole (LXVI) (0.55 g, 3.4 mmol) and SPhos Pd G4 (135 mg, 0.17 mmol) in dioxane (10 mL) was added 2 N aqueous K3PO4 (1.7 mL, 3.4 mmol). N2 gas was bubbled into the mixture for 10 min and then heated to 90 C. for 24 h. The reaction mixture was partitioned between EtOAc and aqueous saturated NaHCO3. Insoluble solids were removed by filtration and the organic layer separated and washed with water and brine. The organic layer was separated, dried (MgSO4) and concentration to dryness under vacuum. The crude was then combined with the insoluble solid, dissolved in a mixture of chloroform/MeOH, absorbed on silica gel and was purified by column chromatography (0%?70% CHCl3/10% 7N NH3 MeOH in CHCl3) to give N-(6-(1-Methyl-1H-1,2,3-triazol-4-yl)isoquinolin-3-yl)-2-morpholinoacetamide 11 as a brown solid (170.0 mg, 0.482 mmol, 28.4% yield). 1H NMR (499 MHz, DMSO-d6) delta ppm 2.55-2.61 (4H, m), 3.25 (2H, s), 3.63-3.69 (4H, m), 4.14 (3H, s), 8.04 (1H, dd, J=8.51, 1.65 Hz), 8.13 (1H, d, J=8.78 Hz), 8.33 (1H, s), 8.50 (1H, s), 8.74 (1H, s), 9.13 (1H, s), 10.07 (1H, s); ESIMS found for C18H20N6O2 m/z 353.2 (M+1).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4-Bromo-1-methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; Samumed, LLC; KC, Sunil Kumar; Mittapalli, Gopi Kumar; Chiruta, Chandramouli; Hofilena, Brian Joseph; Mak, Chi Ching; Eastman, Brian Walter; Bollu, Venkataiah; (158 pag.)US2019/119263; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C3H5N3

General procedure: 1-Methylimidazole (0.49 g, 6.05 mmol) was added to a stirred solution of Key Intermediate-1 (2.3 g, 4.03 mmol) in acetonitrile (25 mL) at RT. The reaction mixture was heated to 90 C for 16 h and concentrated under reduced pressure. The crude material was triturated with diethyl ether (2 x 10 mL) to afford a brown solid (2.4g) which was used in the next steps without further purification. M/z 616.38 (M)+ TFA: H2O (9:1, 20 mL) was added to the brown solid (2.4 g) at RT. The reaction mixture was stirred for 3 h and concentrated under reduced pressure. The resulting crude product was triturated with diethyl ether (2 x 5 mL) and dried under high vacuum. The crude product was purified by preparative HPLC affording the title product as off-white solid (515 mg, 30% over 2 steps).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 16681-65-5, and we look forward to future research findings.

Reference:
Patent; Antabio SAS; DAVIES, David; LEIRIS, Simon; (56 pag.)EP3572411; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1-Methyl-1H-1,2,3-triazole

Intermediate 13: bis(1-methyl-1H-1,2,3-triazol-5-yl)methanoneA solution of 1 -methyl- lH-1, 2, 3-triazole (0.954 g, 11.4 mmol, prepared according to PCX Int. AppL, 2008098104) in THF (22 mL) was stirred at-70 C under argon while -BuLi (2.56 M in hexanes, 4.29 mL, 11.0 mmol) was added dropwise over 5 minutes. After stirring for another 5 minutes, a solution of ethyl mefhoxy(methyl)carbamate (0.665 g, 4.99 mmol) in THF (3 mL) wras added dropwise over 5 minutes. After stirring at ~-70 C for an additional 5 minutes, the cold bath was removed and the light slurry was allowed to warm to room temperature with stirring for 1 hour 20 minutes. The reaction was then quenched at room temperature with 5 M aqueous H4CI (3 mL) and the aqueous layer was extracted with THF (1 x 6 mL). The combined organic layers were dried (Na2S04), filtered, and concentrated. A portion of the residue was crystallized from -’30 mL toluene to provide, after washing the filter cake with ether (1 > 3 mL) and heptane (1 x 3 mL), to yield the title compound as blunt needles.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 6086-21-1, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 6086-21-1, name is 1-Methyl-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 133.; Preparation of 8-(1-ethyl-propyl)-3-[3-methoxy-5-(2-methyl-2H-[1,2,4]triazol-3-yl)- thiophen-2-yl]-2,6-dimethyl-imidazo[1,2-b]pyridazine.; A. 5-Bromo-1-methyl-1H-[1,2,4]triazole.; EPO To a -78 °C solution of l-methyl-1H-[1,2,4]triazole (1.0 mL, 13.20 mmol) and TEtaF (100 mL) is added 1.6 M n-BuLi (8.70 mL, 13.86 mmol). After 45 minutes 1,2- dibromo-l,1,2,2-tetrafluoro-ethane (1.76 mL, 14.52 mmol) is added, the solution is warmed to ambient temperature and stirred for 2 hours. The solution is diluted with EtOAc (200 mL), washed with water (150 mL), brine (150 mL), dried over MgSO4, filtered and concentrated to furnish the title compound (1.37 g, 8.46 mmol, 64percent). 1H NMR (CDCl3) delta 3.82 (s, 3H), 7.78 (s, 1H). LC/MS (m/z): calcd. for C3H4BrN3 (M+H)+: 162.0; found: 161.9.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1,2,4-triazole help many people in the next few years.

Reference:
Patent; ELI LILLY AND COMPANY; WO2006/102194; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7343-33-1, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, molecular formula is C2H2BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3-bromo-1H-1,2,4-triazole (32.1 mg, 0.217 mmol) and BF3OEt2 (54 mul, 0.426 mmol) were added to a stirred solution of Intermediate 6 (26.0 mg, 0.043 mmol) in 1,2- dichloroethane (0.43 ml). The reaction mixture was a light yellow solution that was heated to 50°C. After 1.75 hr, LCMS and 1H NMR showed complete consumption of Intermediate 6. The reaction mixture was cooled to room temperature, the solvent was evaporated, and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and separated using a single HPLC run on a 19 x 150 mm Sunfire Prep C18 OBD 10 mum column by eluting with acetonitrile/water + 0.1percent TFA. The HPLC fractions containing the fastest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6A (3.6 mg) as a white solid. The HPLC fractions containing the second eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6B (13.1 mg) as a white solid. The HPLC fractions containing the slowest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6C (5.8 mg) as a white solid.EXAMPLE 6A:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.81 (d, 3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.94 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.40-1.44 (m), 1.46-1.65 (m), 1.73-1.96 (m), 2.11-2.22 (m), 2.43 (broad dd, 1H, H13), 2.79 (broad d, 1H), 2.84 (s, 1H, H7), 3.49 (d, 1H), 3.53 (d, 2H), 3.60 (d, 1H), 3.73 (broad d, 1H), 3.94 (d, 1H), 5.50 (dd, 1H, H5), 5.72-5.80 (broad m, 1H, H14), 9.29 (broad s, 1H, triazole). Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6B:1H NMR (CD3OD, 600 MHz, ppm) delta 0.75 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (d, 3H, Me), 0.83 (d, 3H, Me), 0.84 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.91 (s, 3H, Me), 1.13 (s, 3H, Me), 1.19 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.43 (m), 1.46-1.56 (m), 1.58-1.64 (m), 1.72-1.95 (m), 2.09-2.21 (m), 2.30 (dd, 1H, H13), 2.83 (s, 1H, H7), 2.85 (d, 1H), 3.48 (d, 1H), 3.48 (d, 1H), 3.54 (dd, 1H), 3.60 (d, 1H), 3.88 (d, 1H), 3.95 (d, 1H), 5.47 (dd, 1H, H5), 5.71-5.77 (m, 1H, H14), 8.10 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6C:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.77 (d, 3H, Me), 0.82 (d, 3H, Me), 0.85 (d, 3H, Me), 0.86 (s, 3H, Me), 0.86 (d, 3H, Me), 0.89 (d, 3H, Me), 0.92 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.44 (m), 1.48-1.65 (m), 1.76-1.96 (m), 2.11-2.22 (m), 2.41 (dd, 1H, H13), 2.72 (d, 1H), 2.84 (s, 1H, H7), 3.47 (d, 1H), 3.50 (d, 1H), 3.52 (dd, 1H), 3.58 (d, 1H), 3.72 (d, 1H), 3.91 (d, 1H), 5.48 (dd, 1H, H5), 5.51-5.57 (m, 1H, H 14), 8.52 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).

I am very proud of our efforts over the past few months and hope to 5-Bromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 3,5-Dibromo-1H-1,2,4-triazole

In a 100 mL round-bottomed flask. 3.5-dibromo- 1 H- 1.2.4-triazole (5g, 22.0 mmol. Eq: 1.00), 1 – (chloromethyl)-4-methoxybenzene (3.45 g. 22.0 mmol. Eq: 1) and N-ethyl-N-isopropylpropan-2- amine (5.7 g. 44. 1 mmol. Eq: 2) were combined with acetonitrile (101 ml ) to give a light yellow solution. Potassium iodide (1.83 g, 11.0 mmol, Eq: 0.5) was added. The mixture was heated to reflux for 2 hours. The reaction mixture was cooled and diluted with EtOAc (100 mL), washed with H20 (50 mL) and brine (50 mL). The organic layer was dried over anhydrous MgS04, filtered and volatiles were removed under reduced pressure to yield an oil from which the compound was isolated by column chromatography (Hexanes/EtOAc = 70/30) to give 7.3 g of desired product (95%).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 7411-23-6.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Zhi; CHIN, Elbert; ERICKSON, Shawn David; GABRIEL, Stephen Deems; MERTZ, Eric; WEIKERT, Robert James; WO2014/135483; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1- (3-CHLORO-PROPOXY)-4-NITRO-BENZENE (7 g, 32.5 mmol) is dissolved in 2-methyl- 2-butanol (35 ml) followed by the addition of 1H-1, 2,3-triazole (3.43 g, 48.7 mmol), potassium iodide (0.54 g, 3.25 mmol) and sodium hydroxide (1.95 g, 48.7 mmol). The mixture is stirred for 20 h at 120 C, evaporated to dryness and suspended in toluene. Washing with water, drying over sodium sulfate and concentration in vacuo yields a crude product, which is washed with ether yielding L- [3- (4-NITRO-PHENOXY)-PROPYL]-LH- [L, 2,3] triazole as a colorless solid. Yield 6 g (75 %) MS: M = 249.3 (API+) H-NMR (400 MHz, CDC13) : 2.48 (m, 2H), 4.07 (t, J = 5.77 Hz, 2H), 4.64 (t, J = 6.7 Hz, 2H), 6.93 (d, J = 9.3 Hz, 2H), 7.56 (s, 1H), 7.72 (s, 1H), 8.20 (d, J = 9.2 Hz, 2H).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,3-Triazole.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/96796; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-1,2,4-triazole (0.45 g). After hydrogen gas evolution ceased, 2-chloro-4-fluorophenyl-(5H,11H-pyrrolo[2,1-c][1,4]benzo-diazepine-10-yl)-methanone (1.70 g) was added and the reaction mixture was heated in a sand bath at 110 C. for 18 hours. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 1.25 g of the title compound as colorless crystals, m.p. 191-193 C., MS m/z: 404.1 (M+H)+.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Patent; American Cyanamid Company; US6831079; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics