Triazoles

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The 1, 2, 3-triazole (3.45g, 50mmol), 2-iodo-5-methyl benzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘-dimethyl -1 , 2-cyclohexanediamine (0.51g, 3. 6mmol), cuprous iodide (0.38g, 2mmol) and N, N-dimethyl formamide (30 ml) are sequentially added to the 100 ml round bottom flask in a single port, the resulting reaction mixture under the protection of nitrogen is gradually heated up to 100 C, reaction 4 hours. Stop the reaction, cooling to room temperature to be reacted, water (150 ml) is diluted, and using ethyl acetate (200 ml × 2) extraction . Remove organic layer, the aqueous layer with concentrated hydrochloric acid (the mass fraction is 36.5%) acidified to pH to 1-2, then using ethyl acetate (200 ml × 2) extraction, and combined with the organic layer dried with anhydrous sodium sulfate. Filtering, the filtrate concentrated under reduced pressure, the resulting residue is purified by silica gel column chromatography (dichloromethane / methanol (v / v) = 50/1) to obtain the title compound as yellow solid (2.76g, 68%) .

I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd.; Jinchuan, Fei; Gao, Heng; Zhang, Ji; Zhang, Yingjun; (84 pag.)CN105461699; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1186050-58-7, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C9H6FN3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Dissolve 2-fluoro-6- (2H- 1,2,3 -triazol-2-yl) benzoic acid (0.69 g, 3.33 mmol) with anhydrous dichloromethaneThionyl chloride (8 mL, 109.0 mmol) and DMF (0.04 mL, 0.5 mmol) were slowly added and the reaction was gradually warmed to reflux for 3 hours. The reaction was stopped, cooled and the solvent was slowly evaporated under reduced pressure. The resulting product was used directly in the next step.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1186050-58-7, Happy reading!

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A 50 mL flask containing 1-methyl-1H-1,2,3-triazole (0.47 g, 5.71 mmol) in dry THF (3 mL) was cooled to -43 C. (CH3CN-CO2 bath). n-Butyllithium (2.5 M in THF, 2.43 mL, 6.08 mmol) was then added dropwise resulting in a light blue suspension. The suspension was stirred at -40 C. for 40 minutes, and then a homogeneous solution of 6-(trifluoromethyl)nicotinaldehyde (1 g, 5.71 mmol) in THF (7 mL) was introduced at -40 C. The resulting homogeneous colorless solution was allowed to warm gradually to room temperature, and after 30 minutes, LC/MS showed that the reaction was complete. The mixture was quenched with water and aqueous NH4Cl and extracted with EtOAc (2*). The combined organic extracts were washed with brine, dried over Na2SO4, filtered and concentrated to provide the title compound as a semi-solid which was carried on to the next step without further purification.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of 504 mg (2 mmol) 8-(phenylsulfonyl)-3,8- diazabicyclo[3.2.1 ]octane (Intermediate 2) in 6 mL NMP were added at RT 452 mg (2 eq, 4 mmol) 1 H-1 ,2,3-triazole-5-carboxylic acid, 1045 mu (3 eq, 6 mmol) DIPEA and 1 .52 g (2 eq, 4 mmol) HATU and the mixture was stirred for 6 h. The mixture was taken up in ethyl acetate, washed with water, dried with sodium sulfate, evaporated and the residue was subjected to flash chromatography using ethyl acetate and hexane to yield 787 mg (1 .93 mmol, 96 %) of the title compound 3,8-diazabicyclo[3.2.1 ]oct-3-yl(1 H- 1 ,2,3-triazol-4-yl)methanone.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-70-2, Happy reading!

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; KOPPITZ, Marcus; SIEBENEICHER, Holger; STEUBER, Holger; TER LAAK, Antonius; NUBBEMEYER, Reinhard; ROTTMANN, Antje; IRLBACHER, Horst; BADER, Benjamin; PETERS, Michaele; WAGENFELD, Andrea; TEREBESI, Ildiko; (123 pag.)WO2017/202817; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of aromaticaldehyde (1.0 mmol) and dimedone(1.0 mmol) with 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol) was stirred in acetic acid (5 mL) at 60 Cfor the appropriate time (Tables 3, 4). The progress of thereaction was monitored by TLC. After completion of thereaction, a thick precipitate was obtained. The solid productwas filtered off and washed with acetic acid (3 × 2 mL) togive the pure products 4 and 6, and subsequently dried in air.The pure products were characterized by conventional spectroscopicmethods. Physical and spectral data for the compounds,4b, 4c, 4h, 4j, 6a, 6c, and 6h are represented below:

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazol-5-amine help many people in the next few years.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Hazeri, Nourallah; Habibi-Khorassani, Sayyed Mostafa; Journal of the Iranian Chemical Society; vol. 12; 8; (2015); p. 1419 – 1424;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 103755-58-4

General procedure: Into a round-bottom flask equipped with a magnetic stirring bar already containing a solution of 10mmolof 1,2,3-triazoles type 12 in 27.5mL of DMSO was added 11mmolof IBX. This mixture was stirred at room temperature for 4h. Next, distilled water (20mL) was added, and stirring was continued for 15minat room temperature. Subsequently, the mixture was filtered, extracted with ethyl acetate and dried over with MgSO4. The product was purified via silica-gel column chromatography using gradient mixture of hexane-ethyl acetate to afford the pure derivatives 11 and 15a-b.

If you are hungry for even more, make sure to check my other article about 103755-58-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Gonzaga, Daniel; Senger, Mario Roberto; Da Silva, Fernando De Carvalho; Ferreira, Vitor Francisco; Silva Jr., Floriano Paes; European Journal of Medicinal Chemistry; vol. 74; (2014); p. 461 – 476;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 3641-13-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 5-Amino-4H-1,2,4-triazole-3-carboxylic acid is helpful to your research.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1-methyl-1H-1,2,3-triazole was prepared according to the literature reference WO2008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to give a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 16681-65-5, Happy reading!

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 5-Phenyl-1H-1,2,4-triazol-3-amine

General procedure: 3-Amino-1,2,4-triazole 8a?f (1.0 mmol), o-hydroxybenzaldehyde9a?e (1.0 mmol), acetone (10) (0.22 ml,3.0 mmol), and abs. EtOH (2 ml) were mixed in amicrowave process vial, and then 4 N solution of HCl indioxane (0.07 ml, 0.3 mmol) was added. The mixture wasirradiated at 150°C for 30 min. The reaction mixture wascooled by an air flow and stirred for 24 h at roomtemperature for complete precipitation of the product. Theprecipitate was filtered off, washed with EtOH (1 ml) andEt2O (3×1 ml), and dried. Compounds 1a?w were obtainedin a form of white solids.

If you are hungry for even more, make sure to check my other article about 4922-98-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Guemue?, Mustafa K.; Gorobets, Nikolay Yu.; Sedash, Yuriy V.; Chebanov, Valentin A.; Desenko, Sergey M.; Chemistry of Heterocyclic Compounds; vol. 53; 11; (2017); p. 1261 – 1267; Khim. Geterotsikl. Soedin.; vol. 53; 11; (2017); p. 1261 – 1267,7;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one

EXAMPLE 10: ALTERNATIVE PROCESS FOR THE PREPARATION OF APREPITANT (FORMULA I)10 g of the compound of Formula IIb obtained from Example 6 and 30 ml of N,N-dimethylformamide (DMF) were charged into a clean and dry 4 neck round bottom flask followed by stirring for about 10 minutes. The reaction solution was cooled to about 0 0C and a mixture of 3.5 g of potassium carbonate and 1 ml of water was charged. To the resultant reaction mixture a solution of 3.7 g of 3- chloromethyl-1 ,2,4-triazolin-5-one of Formula (IIe) dissolved in 10 ml of N1N- dimethylformamide (DMF) was charged followed by stirring at about 0 0C for about 4 hours. After the completion of the reaction, 100 ml of water was charged followed by stirring for about 30 minutes. The separated solid was filtered and the solid was washed with 20 ml of water. The solid obtained was dried at about 60 0C for about 3 hours to afford 8 g of aprepitant of Formula I. Specific optical rotation (SOR): [alpha]D25 = +61.18° (C = 0.68percent MeOH); Purity by RS HPLC: 94.36percent; Purity by chiral HPLC: (+)-cis isomer: 97.12percent; (-)-cis isomer: 2.87percent.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, in my other articles.

Reference:
Patent; DR. REDDY’S LABORATORIES LTD.; DR. REDDY’S LABORATORIES, INC.; WO2007/44829; (2007); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics