Triazoles

Reference of 61-82-5, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

We very much hope you enjoy reading the articles and that you will join us to present your own research about 61-82-5, Happy reading!

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 46: 6-Methyl-2-[1 ,2,3]triazol-2-yl-nicotinic acid.To a 100 ml round bottom flask containing 2-chloro-6-methylnicotinic acid (3 g, 17.4 mmol), copper iodide (0.16 g, 0.5 mol%), and cesium carbonate (1 1 .4 g, 35 mmol) was added a mixture of dioxane (20 ml_) and H2O (0.1 ml, 5.25 mmol). Next triazole (2.03 ml_, 35 mmol) and finally (R,R)-(-)-N,N’-dimethyl-1 ,2- cyclohexanediamine ligand (0.56 ml_, 3.5 mmol) were added. The resulting clumpy yellow slurry was stirred until evenly dispersed. Upon heating to 100 C the reaction mixture changed from a yellow slurry to pale green. As heating progressed the slurry became less thick and was stirred more easily. The light green slurry was stirred for 4 hr at 100 C and left to stir at room temp overnight. At this point the reaction mixture appeared as a cobalt blue slurry which was then diluted with 20 ml_ ether and 20 ml_ H2O. The resulting solution was thoroughly stirred and transferred to a seperatory funnel then the RBF was subsequently rinsed with 20 ml_ ether and H2O each. The aqueous layer was separated from the organic layer and acidified to pH 1 with 6 ml_ cone. HCI.The now brown/ lime green aqueous layer was extracted twice with EtOAc. The bright yellow organic layers were combined and dried with Na2SO4 and then cone, into a yellow powder under reduced pressure. To the yellow powder was added EtOAc to form a yellow slurry. The solids were filtered off and washed with EtOAc to give a very pale yellow powder, which was found by 1H NMR to be Intermediate 53 (25% yield). The filtrate was cone, into a yellow solid and purified by FCC using 0-5% MeOH in DCM w/ 0.5% AcOH to give the title compound in a 20% yield. MS (ESI): mass calculated for C9H8N4O2, 204.18; m/z found 205.3 [M+H]+. 1 H NMR (400 MHz, CD3OD): 8.21 – 8.18 (m, 1 H), 7.98 (s, 2H), 7.51 (d, J = 7.9 Hz, 1 H), 2.64 (s, 3H).Intermediate 49: 6-Methyl-2-[1 ,2,3]triazol-1 -yl-nicotinic acid.The title compound was isolated from the procedure used to prepareIntermediate 46 with a 25% yield. MS (ESI): mass calculated for ?9?8?4?2, 204.18; m/z found 205.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 8.48 (d, J = 1 Hz, 1 H), 8.25 (dd, J = 7.9, 3.8 Hz, 1 H), 7.88 (d, J = 1 .1 Hz, 1 H), 7.54 (d, J = Hz, 1 H), 2.64 (s, 3H).

I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50202; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step A Synthesis of 8-methoxy-2-methyl-4-(5-methyl-l//-l,2,4-triazol-l-yl)quinoline and 8- methoxy-2-methyl-4-(3 -methyl- H- 1 ,2,4-triazol- 1 -yl)quinoline4-chloro-8-methoxy-2- methylquinoline (100 mg, 0.481 mmol) was reacted with 3-methyl- IH-l, 2,· 4-triazole (46.0, 0.554 mmol) according to the synthesis of 4-(4-fluoro- 1 /Y-pyrazol- 1 -yl)-8-mcthoxy-2-mcthylquinolinc to give a mixture of the title compounds. MS (m/z): 255.3 [M+H+] Step B Synthesis of 2-methyl-4-(3-methyl-l//-l,2,4-triazol-l-yl)quinolin-8-ol and 2-methyl- 4-(5-methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-ol (0284) A mixture of 8-mcthoxy-2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc and 8- mcthoxy-2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc (153 mg, 0.602 mmol) was demethylated according to the synthesis of 4-(4-fluoro-l//-pyrazol-l-yl)-2-methylquinolin-8-ol to give a mixture of the title compounds. MS (m/z): 241.1 [M+H+] Step C. Synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((2-methyl-4-(5-methyl-l//-l,2,4-triazol-l- yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (0286) A mixture of 2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol and 2-methyl-4-(5- mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol (48.3 mg, 0.201 mmol) was reacted with (5)-2-(l-(3- chloro-2-(chloromethyl)-5-fluorophenyl)ethyl)isoindoline-l,3-dione (70.7 mg, 0.201 mmol) according to the synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((4-(4-fluoro-l/7-pyrazol-l-yl)-2- methylquinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline-l,3-dione to give a mixture of the title compounds. MS (m/z): 556.4 [M+H+] Step D. Synthesis of (5′)- 1 -(3-chloro-5-fluoro-2-((2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 – yl)quinolin-8-yloxy)methyl)phenyl)ethanamine and (5)- 1 -(3-chloro-5-fluoro-2-((2-methyl-4-(3- methyl- H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethanamine (0287) A mixture of (S)-2-( 1 -(3-chloro-5-fluoro-2-((2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 – yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (111 mg, 201 miho) was deprotected according to the synthesis of (5)-l-(3-chloro-5- fluoro-2-((4-(4-fluoro- l/ -pyrazol- 1 -yl)-2-methylquinolin-8-yloxy)methyl)phenyl)ethanamine to give the title compounds. MS (m/z): 448.3 [M+Na+]

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3-Methyl-1H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; PHARVARIS B.V.; GIBSON, Christoph; SAUPE, Joern; AMBROSI, Horst-Dieter; HAUSTEDT, Lars Ole; (99 pag.)WO2019/101906; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2-(2H-1.2,3-triazol-2-yl>5-methylbenzoic acid (A-3)A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 1200C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO^ filtered and concentrated. The residue was purified by gradient elution on Sitheta2 (0 to 10% MeOH in water with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-3, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-3 : 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

In the meantime we’ve collected together some recent articles in this area about 288-36-8 to whet your appetite. Happy reading!

Reference:
Patent; MERCK & CO., INC.; WO2008/8518; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

2-iodobenzoic acid (1 g, 4.03 mmol), 2H-l,2,3-triazole (0.334 g, 4.84 mmol), copper(I) iodide (0.768 g, 4.03 mmol), cesium carbonate (2.63 g, 8.06 mmol) were reacted in DMF at 120 C under microwave irradiation for 20 minutes. Then the reaction was monitored confirming the presence of the required product. Large amount of starting material resulted left. The reaction was further irradiated for 20 minutes at 120 C. Solvent was then removed under vacuum, poured into water (100 ml) and neutralised with 37% HC1. Aqueous phase was extracted with Et20 (3×100 ml), and the collected organic phases were concentrated to give 1 g of crude material. This was purified with Biotage SP1 (over a 340g C18 column) eluting with a gradient of ACN and water (modified with 0.5% HCOOH). Fractions were collected and concentrated under vacuum to give the title compound D43 as colourless solid (140 mg). UPLC (GEN QC Basic): rt = 0.29 minutes, peak observed: 188 (M-l) C9H7N302 requires: 189. 1H NMR (400 MHz, CHLOROFORM-d) delta ppm 6.47 (br. s., 1 H) 7.47 – 7.59 (m, 1 H) 7.66 (t, 1 H) 7.75 – 7.87 (m, 3 H) 7.91 (d, 1 H)

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXO GROUP LIMITED; DI FABIO, Romano; WO2012/89606; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (200 mg, 2.41 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (20 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 1.0 mL, 2.5 mmol) was added drop wise which afforded a dark reddish-brown viscous solution. The mixture was stirred at -30 C. for 35 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,4-dimethyloxazol-5-yl)methanone (500 mg, 1.05 mmol, in 4 mL THF, Intermediate 51: step b) was introduced at -20 C. The reaction mixture became a dark brown color and was then placed in an ice-water bath and allowed to warm gradually to room temperature. After 45 minutes, the mixture was quenched with aqueous NH4Cl solution and extracted with EtOAc:THF (10:2), 4*50 mL. The combined organics were washed with brine, dried over Na2SO4, filtered and concentrated to provide a brown oil. Chromatography on silica gel (3% MeOH-DCM increasing to 5% MeOH-DCM) to provide the title compound as a faint amber solid. MS m/e 558.2 [M+H]+. 1H NMR (400 MHz, CDCl3) delta ppm 8.15 (d, J=2.0 Hz, 1H), 7.86 (d, J=8.8 Hz, 1H), 7.54-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.14 (s, 1H), 4.35 (s, 2H), 4.10 (s, 3H), 4.03 (s, 1H), 3.92 (s, 3H), 2.40 (s, 3H), 1.54 (s, 3H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1-Methyl-1H-1,2,3-triazole, in my other articles.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 217448-86-7, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 4 Preparation of Rufinamide (I). Mixture of 10 g (0.039 mol) of methyl-1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, and 150 ml of methanolic ammonia solution was stirred at ambient temperature. The reaction mixture was heated to 45 C. for 22 hours. Cooled to ambient temperature. Solid was filtered, washed with methanol and dried under reduced pressure. Yield 69 g (87%); HPLC purity: 99.83%.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate.

Reference:
Patent; LUPIN LIMITED; Siyan, Rajinder Singh; Aher, Yogesh Subhas; Bhise, Nandu Baban; Singh, Girij Pal; Gohel, Sunilkumar Vinubhai; US2014/357871; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C3H6N4

(2S,3S)-2-(Fluoromethyl)-7-(methylcarbamoyl)-3-phenyl-2,3-d ihyd robenzofuran-5-carboxylic acid (80 mg, 0.24 minol) and HATU (111 mg, 0.292 minol) were dissolved in DMSO (0.85 mL), andthe resulting solution was treated with DIPEA (0.127 mL, 0.729 minol) and the reaction minxture wasleft to stir at rt for 5 min 1-Methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added andthe reaction was left to stir for 1 h at rt. Further HATU (111 mg, 0.292 minol) and DIPEA (0.127 mL,0.729 minol) were added and the reaction minxture was left to stir for 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added and reaction minxture stirred for 2 h at rt. FurtherHATU (111 mg, 0.292 minol) and DIPEA (0.127 mL, 0.729 minol) were added and the reaction minxturewas left to stir for 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was addedand reaction minxture stirred for 2 h at rt and was then left to stand overnight. HATU (111 mg, 0.292minol) and DIPEA (0.127 mL, 0.729 minol) were again added and the reaction minxture was left to stirfor 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added and reaction minxture stirred for 3 h then left to stand over the weekend. The reaction minxture had separated and become solid and not all of the reactants seemed to have gone into solution therefore further DMSO (1 mL) was added to the reaction minxture and it was left to stir at rt for 3 h. 1-Methyl-1H-1,2,4-triazol- 3-amine (23.8 mg, 0.243 minol) was added and the reaction minxture was left to stir at rt for 1 h thenleft to stand overnight. Further HATU (iii mg, 0.292 minol), DIPEA (0.127 mL, 0.729 minol) and 1- methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) were added and the reaction left to stir at rt for 1 h. Further HATU (iii mg, 0.292 minol), DIPEA (0.127 mL, 0.729 minol) and 1-methyl-1H-1,2,4- triazol-3-amine (23.8 mg, 0.243 minol) were added and the reaction left to stir at rt for 1 h. The reaction minxture was then purified by MDAP (method high pH) to give (2S,3S)-2-(fluoromethyl)-N7-methyl-N5-( 1-methyl-i H-1,2,4-triazol-3-yl)-3-phenyl-2,3-d ihydrobenzofuran-5,7-dicarboxaminde (24.8 mg 25percent) as a white solid.LCMS (method forminc): Retention time 0.79 min [M+H] = 410

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 49607-51-4

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ATKINSON, Stephen, John; DEMONT, Emmanuel, Hubert; HARRISON, Lee, Andrew; PRESTON, Alexander, G.; SEAL, Jonathan, Thomas; WALL, Ian, David; WATSON, Robert, J.; WOOLVEN, James, Michael; (214 pag.)WO2017/174620; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 1H-1,2,4-Triazol-5-amine

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazol-5-amine, in my other articles.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4,5-Dibromo-2H-1,2,3-triazole

Step 1 : A mixture of A-24.1 (2.00 g, 1 1 .0 mmol), A-24.2 (3.80 g, 17.0 mmol), Cul (0.13 g, 0.68 mmol), A-24.3 (0.14 mL, 1 .00 mmol) and K2C03 (2.30 g, 17.0 mmol) in dry DMF (10 mL) is heated to 120°C by microwave irradiation and stirred for 40 min. The mixture is poured into water and extracted with Et20. The aq. phase is acidified with HCI (4N aq. solution) and extracted with EA. The combined organic phases are dried and concentrated to give the crude product which is purified by flash column chromatography on silica gel (using a solvent gradient from 100percent EA to EA/MeOH = 9/1 ) to provide 3.6 g of A-24.4. APCI+/-: 365 [M+H]+; HPLC (Rt): 1 .10 min (Method N).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 22300-52-3, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta; NICHOLSON, Janet Rachel; PEKCEC, Anton; (102 pag.)WO2017/178344; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics