Triazoles

Synthetic Route of 1001401-62-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-(2H-l,2,3-triazol-2-yl)benzoic acid (500 mg, 2.64 mmol) in SOCI2 (5 mL) was heated to reflux for 1 hour. After cooling to RT, the mixture was concentrated in vacuo to give a residue. To a solution of ((3R,6R)-6-methylpiperidin-3- yl)methanol hydrochloride (437 mg, 2.65 mmol) in toluene (5 mL) was added 1 N NaOH (5.3 mL), followed by a solution of the reaction residue in toluene (5 mL) dropwise. The resulting mixture was stirred at 10C for 12 h, then poured into water (5 mL) and extracted with EtOAc (5 mL x 3). The combined organic layers were dried over sodium sulfate, filtered, and concentrated in vacuo. The residue was purified by flash column chromatography on silica gel (20-50 % EtOAc in petroleum ether) to afford the title compound as a solid. LRMS m/z (M+H) 301.1 found, 301.2 required.

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 1001401-62-2.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; KUDUK, Scott, D.; LUO, Yunfu; MENG, Na; YU, Tingting; (83 pag.)WO2016/69510; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5-Phenyl-1H-1,2,4-triazol-3-amine

Example 38; STEP A; To the solution of 3-phenyl-1H-1 ,2,4-triazol-5-amine (32 mg, 0.2 mmol) in DMA (0.5 ml_) was added ethyl 4-chloro-4,4-difluoro-3-oxobutanoate (40 mg, 0.2 mmol). The reaction mixture was stirred in microwave at 180 0C for 20 minutes, and then cooled to room temperature. The product, compound 38-1 , was purified by reverse phase HPLC.

If you are hungry for even more, make sure to check my other article about 4922-98-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SCHERING CORPORATION; SHIPPS, JR., Gerald, W.; CHENG, Cliff, C.; HUANG, Xiaohua; ACHAB, Abdelghani, Abe; ORTH, Peter; VOIGT, Johannes, H.; SOUCY, Kyle, Ann; WO2010/56631; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 2.5 M solution of n-butyllithium in hexanes (9.60 mL, 24.0 mmol) was added dropwise to a stirring solution of 1-methyl-1H-1,2,3-triazole (2.00 g, 24.0 mmol, prepared according to PCT Int. Appl., 2008098104) in dry THF (100 mL) at -50 C. The reaction became heterogeneous and yellow during addition. After 15 min, a solution of tert-butyl 3-formylazetidine-1-carboxylate (4.45 g, 24.0 mmol) in dry THF (10 mL) was added dropwise by syringe. The reaction mixture became homogeneous and was allowed to slowly warm to 0 C. Water (10 mL) and ethyl acetate (100) mL were added. The biphasic mixture was warmed to 23 C. The mixture was partitioned between half-saturated aqueous sodium chloride solution (100 mL) and ethyl acetate (300 mL). The layers were separated. The organic layer was dried with sodium sulfate and the dried solution was filtered. Celite (14 g) was added to the filtrate and the solvents were removed by rotary evaporation to provide a free-flowing powder. The powder was loaded onto a silica gel column. Elution with ethyl acetate initially, grading to 5% methanol-ethyl acetate provided the title compound as a white foam.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 1533519-84-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, molecular formula is C15H13N3S, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The reaction flask was added to 250mL of 4- (4-cyclopropyl-naphthalen-1-yl) -4H-1,2,4- triazole-3-thiol (compound A, 5g,0.018mol), potassium carbonate (3.74g, 0.027mol, 1.5eq), DMF (50ml). Stirring solution of ethyl bromoacetate (3.3g,0.022mol, 1.2eq). Dropping was completed, the reaction was stirred room temperature for 1.5h. Sample testing of raw materials after completion of the reaction, to the reaction mixture was stirred atWas added dropwise in ice water 100ml, white solid was precipitated. Stirring 30min, filtration, washing with water. After drying the filter cake with acetic acidRecrystallized from ethyl to give a white solid 4g, i.e. intermediates B.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, hurry up and to see.

Reference:
Patent; Zhejiang Jingxin Pharmaceutical Co., Ltd.; Huang, yue; Xu, hui; Zhangyu, bin; Zheng, fei; (19 pag.)CN105399694; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 4928-88-5

Step 1 Preparation of 1-trityl-1H-[1,2,4]triazole-3-carboxylic acid methyl ester A solution of 1H-[1,2,4]triazole-3-carboxylic acid methyl ester (3.0 g, 0.23 mol) in N,N-dimethylformamide (76 mL) at 25° C. was treated with triphenylmethylchloride (7.2 g, 0.23 mol) and triethylamine (6.41 mL, 0.23 mol). The reaction mixture was stirred at 25° C. for 4 days and then diluted with ethyl acetate. The mixture was then washed with a dilute aqueous hydrochloric acid solution. At this time, methanol was added to the organic layer. A precipitate formed and was removed by filtration. The organics were further washed with a saturated aqueous sodium chloride solution, dried over magnesium sulfate, filtered, and concentrated in vacuo. The resulting solid was triturated with diethyl ether. The solid was collected by filtration and washed again with diethyl ether to afford 1-trityl-1H-[1,2,4]triazole-3-carboxylic acid methyl ester as a white solid (2.45 g, 84percent) which was used without further purification: LR-FAB for C23H19N3O2 (M+) at m/z=369.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of Methyl 1H-1,2,4-triazole-3-carboxylate ,and how the biochemistry of the body works.

Reference:
Patent; Dunten, Peter W.; Foley, Louise H.; Huby, Nicholas J.S.; Pietranico-Cole, Sherrie L.; Yun, Weiya; US2004/14766; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 13273-53-5, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a 50 mL round bottle flask was added 1,1?-Bis(diphenylphosphino)ferrocenedichloro Palladium(II) (0.1equiv), bromide (1.0equiv) and vinylboronic acid pinacol ester (2.0equiv) in 20mL dioxane. The mixture was degassed for 5min, and sodium carbonate aqueous solution (2.0M, 10equiv) was added. The mixture was then heated to 85C for 14h. After cooled to rt, the reaction mixture was filtered through a short Celite pad and washed with EtOAc. The organic solution was concentrated under reduced pressure and the residue was loaded into combi flush for purification to afford the product as oil.

In the meantime we’ve collected together some recent articles in this area about 13273-53-5 to whet your appetite. Happy reading!

Reference:
Article; Lian, Yajing; Burford, Kristen; Londregan, Allyn T.; Tetrahedron; vol. 71; 50; (2015); p. 9509 – 9514;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a 50 mL round-bottomed flask equipped with a magnetic stirbar was added 1-H-l, 2. 3-triazole (0.192 g. 2.78 mmol) and DMF (10 mL) and then cooled to O0C while stirring. Then. sodium hydride (60% dispersion in mineral oil) (0.133 g. 3.33 mmol) is added to the reaction mixture and was slowly allowed to warm to ambient temperature. Then, l-iodo-4 pentyne (0.647 g, 3.33 mmol) was added dropwise. The reaction mixture was then heated to 800C and allowed to stir for 2.5 hours. Water (20 mL) was then added to the reaction mixture and then extracted with ethyl acetate (2 x 20 mL). The organic phase was dried with sodium sulfate and concentrated de vacuo followed by a purification by column chromatography (ethyl acetate/hexane) to produce l-Pent-4-ynyl-lH-[1.2.3]triazole (0.349 g. 93%) as a colorless oil. iH NMR (300 MHz, CDCb) delta 7.67 (s, IH). delta 7.59 (s. IH). delta 4.53 (t. 2H). delta 2.20 (t, 2H). delta 2.17 (m. 2H), delta 2.04 (s, IH) ppm: ?C NMR (75 MHz. CDCb) delta 133.9. 123.9. 82.2, 70.4. 48.7, 28.9. 15.7 ppm: HRMS (ESI) calcd for C7H10N3 (M-) 136.0869, found 136.0866

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; NORTH CAROLINA STATE UNIVERSITY; MELANDER, Christian; CAVANAGH, John; RITCHIE, David, F.; ROGERS, Steven, A.; HUIGENS, III, Robert, W.; WO2010/77603; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 27996-86-7, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a stirred solution of 4-(1 H-1 ,2,4-triazol-1-yl)benzaldehyde (400 mg, 2.28 mmol) in dry MeOH (5 ml_), NaBH4 (93 mg, 2.74 mmol) was added at 0 C and the resulting mixture was stirred at RT for 2 h. After completion of the reaction, ice water was added and the mixture was extracted with EtOAc (2 x 20 ml_). The combined organic layer was washed with brine (2 ml_), dried over Na2S04 and concentrated under vacuum. The resulting crude product was purified by flash chromatography (Eluent: 34% EA in pet ether) to get the title product. Yield: 67% (271 mg, white solid). 1H NMR (400 MHz, DMSO-cfe): d 9.27 (s, 1 H), 9.25 (s, 1 H), 7.78 (d, J = 8.6 Hz, 2H), 7.13 (d, J = 8.6 Hz, 2H), 4.85 (s, 1 H), 3.96 (s, 2H). LCMS: (Method A) 176.1 (M+H), Rt.1.04 min, 99.79% (Max).

In the meantime we’ve collected together some recent articles in this area about 27996-86-7 to whet your appetite. Happy reading!

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; WISHART, Grant; KULKARNI, Santosh S.; RAKESH, Paul; (338 pag.)WO2020/39027; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 41253-21-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of Intermediate 1d (12 mmol) in DMF (75 mL) was added the sodium salt of 1,2,4-triazole (5.5 g, 60 mmol). The resultant suspension was heated at 100-110 C. for 40 hr. After cooling the reaction mixture was poured into water (200 mL) and extracted with EtOAc (2200 mL). The combined extracts were washed with brine, dried over Na2SO4 and evaporated to afford a clear colorless oil. Chromatography through silica eluting with 2:3 hexanes/EtOAc furnished the BOC-protected amine as a clear colourless oil.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Sodium 1,2,4-triazol-1-ide.

Reference:
Patent; Merck & Co., Inc.; US6350760; (2002); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-[1,2,3]Triazole-4-carboxylic acid

lH-l,2,3-triazole-4-carboxylic acid (24.6 mg, 217 muiotaetaomicron) was combined with HATU (83 mg, 217 muiotaetaomicron) in DMF (0.3 mL) and stirred at room temperature for 15 minutes. Compound 2 (89 mg, 197 muiotaetaomicron) and DIPEA (103 mu, 592 muiotaetaomicron) were then added. The resulting solution was stirred at room temperature for 15 minutes; LC/MS showed the mass of the desired product. The solvent was removed in vacuo and the crude residue was dissolved in EtOH (3.0 mL). A solution of IN LiOH in water (1.6 mL, 1.6 mmol) was added, and the mixture was stirred overnight at 40C. LC/MS showed the mass of the desired product. The solvent was removed in vacuo and the crude residue was purified by preparative HPLC to yield the title compound (5 mg) as a TFA salt. MS m/z [M+H]+ calc’d for C25H29CIFN5O4, 518.19; found 518.2.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-[1,2,3]Triazole-4-carboxylic acid ,and how the biochemistry of the body works.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics