Triazoles

Reference of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

7.1 : 1 -Methyl-1 H-[1 ,2,3]triazole (1 .50 g; 17.150 mmol) was dissolved in dry THF (30.0 mL) under argon and cooled to -65 C. Butyllithium (2.5 M in hexane; 6.86 mL; 17.150 mmol) was added dropwise over a period of 10 min. The temperature was hold between -65 C and -60 C. A colorless suspension was formed, which was stirred at – 65 C for 1 h. 1 -Methyl-1 H- pyrazole-4-carbaldehyde (1 .89 g; 17.150 mmol), dissolved in dry THF (10.0 mL), was added dropwise at -65 C and the mixture stirred at – 65 C for 15 min. The reaction mixture was slowly warmed to 0 C within 1 .5 h and then quenched with methanol (10 ml_) and evaporated to dryness. The crude residue was dissolved in dry THF (50.0 ml_) and water (15.0 ml_). (0380) Manganese(IV) oxide (2.98 g; 34.299 mmol) was added, and the mixture was stirred at 80 C overnight. Manganese(IV) oxide (2.98 g; 34.299 mmol) was added and the mixture was stirred for further 24 h at 80 C. The mixture was filtered over kieselguhr. The residue was washed with dichloro- methane/methanol(30%). The combined filtrates were evaporated to an aqueous residue. A precipitate was formed, which was filtered by suction and washed with little water, acetonitrile and MTBE and dried under vacuum at 50 C for 1 h. The filtrate was diluted with water and extracted with ethyl acetate. The combined organic layers were washed with sodium sulfate, filtered by suction and evaporated to dryness. The solid residue was triturated with little acetonitrile, filtered by suction and washed with little acetonitrile and MTBE, and dried under vacuum at 50 C for 1 h. Yield: 2.38 g colorless solid; (0381) LC/MS, Rt: 1 .29 min; (M+H) 192.2

This is the end of this tutorial post, and I hope it has helped your research about 16681-65-5!

Reference:
Patent; MERCK PATENT GMBH; BUCHSTALLER, Hans-Peter; (101 pag.)WO2018/87021; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 16681-70-2

[0635] Compound 1 (500 mg, 1.4 mmol) was combinedwith HATU (656 mg, 1.7 mmol), 3H-[1,2,3]triazole-4-carboxylicacid (195 mg, 1.7 mmol) and DMF (3 mL). DIPEA(803 f.LL, 4.6 mmol) was added and the mixture was stirred for30 minutes. Saturated aqueous NH4Cl (10 mL) and EtOAc(40 mL) were added. The organic layer was separated anddried over MgS04 . The solvent was evaporated and the residuepurified by normal phase chromatography (0-1 00%EtOAc/hexanes) to yield Compound 2 (650 mg).

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-[1,2,3]Triazole-4-carboxylic acid ,and how the biochemistry of the body works.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 7170-01-6

The 5-chloro-6-methyl-pyrazolo [1,5-a] pyrimidine-3-carboxylic acid butyl 3rd (607 mg) for N, N- dimethyl formamide (39.8 ml) is added a solution of 4-methyl -1H-1, 2, 3-triazole (208 mg) and potassium carbonate (378 mg). The reaction mixture is stirred at room temperature for 2 hours, to be added, and the mixture is extracted with ethyl acetate. Extract water and saturated salt water cleaning, drying with anhydrous sodium sulfate, and the evaporation of the solvent under reduced pressure. Aid hemostasis by silica gel column chromatography purification (hexane/ethyl acetate), in order to produce the title compound (167 mg).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-Methyl-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; TAKED A PHARMACEUTICAL COMPANY LIMITED; KAWASAKI, MASANORI; MIKAMI, SATOSHI; NAKAMURA, SHINJI; NEGORO, NOBUYUKI; IKEDA, SHUHEI; ASHIZAWA, TOMOKO; MARUI, SHOGO; TANIGUCHI, TAKAHIKO; (135 pag.)TW2016/520; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 41253-21-8

e) Preparation of 2,2′-[5-(1H-1,2,4-triazole-1-yl-methyl)-1,3-phenylene]di(2-methyl propionitrile) (1)A mixture of 2,2′-(5-bromomethyl-1,3-phenylene)di(2-methylpropionitrile) (V) (4 gm, 0.013 moles) and 1,2,4-triazole sodium salt (2.40 gm, 0.026 moles) in N,N-dimethylformamide (28 ml) was heated under stirring at 45-50 C. for 4 hour. The reaction mixture was cooled, poured into the ice-water and extracted with ethyl acetate. The ethyl acetate layer was separated and concentrated to give a residue. This residue was diluted with water, acidified with concentrated hydrochloric acid (adjusted the pH tol-2). The reaction mixture was heated at 50 C. and subsequently filtered the hot solution. The mother liquor was treated with ammonia solution at 0-5 C. (adjusted the pH to 8-9) and extracted with ethyl acetate. The ethyl acetate layer was separated and concentrated to obtain a residue (3.0 g).f) Purification of Anastrozole by Column Chromatography and CrystallizationThis residue was purified through column chromatography by using silica gel column and ethylacetate-hexane (740 ml: 950 ml) as eluent. The solid (2.0 g) obtained was recrystallized using a mixture of acetone-water (12 ml: 20 ml) or ethylacetate-hexane mixture (9 ml to 18 ml) to obtain 2,2′-[5-(1H-1,2,4-triazole-1-ylmethyl)-1,3-phenylene]di(2-methyl propionitrile) (1). [Yield: 34.0%, purity, 99.9%].

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 41253-21-8

Reference:
Patent; Radhakrishnan, Tarur Venkatasubramanian; Baban, Bhise Nandu; Govind, Sathe Dhananjay; Janardan, Chaudhari Chhayendra; Ashokkumar, Joshi Mehul; US2008/207915; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1455-77-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of Zn(NO3)2·6H2O (0.030 g, 0.1 mmol), H3btc (0.024 g, 0.1 mmol), Hdatrz (0.01 g, 0.10 mmol), NaHCO3 (0.025 g, 0.3 mmol) and H2O (10 mL) was placed in a 23 ml Teflon-lined stainless steel reactor under autogenous pressure at 160 °C for 60 h and then cooled to the room temperature slowly. Colorless prism crystals were obtained in 34percent yield based on Zn(NO3)26H2O. Anal. calcd. for C11H7N5O6Zn2 (436.00): C, 30.28; H, 1.61; N, 16.06percent. Found: C, 30.31; H, 1.58; N, 16.02percent. IR (KBr, cm?1) 3387(s), 3175(m), 1607(s), 1566(s), 1395(s), 1366(m), 1307(w), 1224(m), 1077(s), 853(w), 718(s), 688(m), 647(w).

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 3,5-Diamino-1,2,4-triazole is helpful to your research.

Reference:
Article; Cui, Penglei; Li, Xiaohui; Journal of Molecular Structure; vol. 1081; (2015); p. 182 – 186;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,4-Triazole

To a solution (3 ML) of 1,2,4-triazole (0.259 g, 3.75 mmol) in N,N-dimethylformamide was added small portions of sodium hydride (60% dispersion in oil, 0.12 g, 3.0 mmol) at about 20 C., and the mixture was stirred for about 3 hr until hydrogen was not generated.To a solution of sodium salt of 1,2,4-triazole thus obtained was added dropwise a solution (5.5 ML) of the total amount of (2R,3R)-3-(2′,4′-difluorophenyl)-3,4-epoxy-2-methanesulfonyoxybutane obtained above in N,N-dimethylformamide at room temperature.The mixture was stirred at 75-80 C. for 1.5 hr.The reaction mixture was added dropwise to water (20 ML), and the mixture was extracted 3 times with ethyl acetate (20 ML).The extracted ethyl acetate layers were mixed, and the mixture was washed twice with saturated brine (10 ML) and dried over anhydrous magnesium sulfate.After filtration, the filtrate (ethyl acetate solution) was concentrated and the obtained concentrate was subjected to silica gel column chromatography (SiO2, 5 g) and eluted with n-heptane-ethyl acetate (10:1)ethyl acetate.The objective fraction was concentrated to give a pale-yellow oil (0.297 g).The obtained pale-yellow oil was crystallized from a mixed solvent of ethyl acetate (1 ML)-n-heptane (4 ML) to give the title compound (0.185 g, yield from (2R)-2′,4′-difluoro-2-hydroxypropiophenone: 44%).As a result of analysis by HPLC, the optical purity was 100% e.e.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Patent; Sumika Fine Chemicals Co., Ltd.; US2003/236419; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4928-87-4, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (113 mg, 1.19 mmol) and 3- (trifluoromethoxy)benzylamine (250 mg, 1.31 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (200 mg, 1.31 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’- ethylcarbodiimide) (251 mg, 1.31 mmol) followed by N- methylmorpholine (0.52 mL, 4.76 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using DCM and EtOAc (10:90) as eluents to get the desired amide 9 (108.7 mg, 32 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.67 (br s, 1H), 9.28 (br s, 1H), 8.53 (br s, 1H), 7.48- 7.44 (m, 1H), 7.36-7.34 (m, 1H), 7.30 (br s, 1H), 7.24-7.22 (m, 1H), 4.50 (d, J= 6.4 Hz, 2H); 19F -NMR (376 MHz, DMSO-de): <5 -56.70 ppm. MH+ = 287.2 m/z. The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1,2,4-Triazole-3-carboxylic acid is helpful to your research. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,3-Triazole

Potassium carbonate (14.0 g, 101 .35 mmol) was added to solution of 2,3-dichloro-5- nitropyridine (10.0 g, 51 .82 mmol) in THF (60 mL) followed by addition of 2H-1 ,2,3-triazole (3.4 mL, 58.7 mmol). The resulting mixture was stirred at rt until reaction was deemed completed as judged by TLC (-16 h), then diluted with water (300 mL). The aqueous layer was extracted with EtOAc (2 x 300 mL), the organic layer was dried over sodium sulphate, filtered and (0326) concentrated under reduced pressure. The crude product was purified by column (0327) chromatography on silica (100-200 mesh), eluted at 20% EtOAc in p.ether which gave the title compound (7.0 g, 60%) as a solid with 99.42% LCMS purity. MS (ES+) 226.03 [M+H]+.

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MEDIVIR AB; ALBERTELLA, Mark; OeBERG, Fredrik; (96 pag.)WO2018/141749; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 3641-13-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 3641-13-2, name is 5-Amino-4H-1,2,4-triazole-3-carboxylic acid, molecular formula is C3H4N4O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of benzil (0.01 mol), aldehydes (0.01 mol), 3-amino-1,2,4-triazole-5-carboxylic acid (0.01 mol), ammonium acetate (0.01 mol) and ceric ammonium nitrate (15 mol%) as a catalyst were refluxed in ethanol (15 mL) for about 3-4 h. The progress of the reaction was monitored by TLC. After completion of reaction, the mixture was cooled to room temperature. The solid formed was filtered and dried. The crude products were recrystallized by ethanol.

I am very proud of our efforts over the past few months and hope to 5-Amino-4H-1,2,4-triazole-3-carboxylic acid help many people in the next few years.

Reference:
Article; Nikalje, Anna Pratima G.; Ghodke, Mangesh S.; Kalam Khan, Firoz A.; Sangshetti, Jaiprakash N.; Chinese Chemical Letters; vol. 26; 1; (2015); p. 108 – 112;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 41253-21-8, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of phenol 11a (200 mg, 0.441 mmol) and cesium carbonate (158 mg, 0.485 mmol) in DMF (10 mL) was added 1,2-dibromoethane (96 muL, 1.11 mmol). The resulting mixture was stirred at room temperature for 60 h. After dilution with water, the mixture was extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, filtered and concentrated in vacuo. The residue was carried on to the next step without further purification.To a solution of the crude bromide in DMF (10 mL) was added 1,2,4-triazole sodium derivative (122 mg, 1.34 mmol). The mixture was stirred at room temperature for 15 h. After dilution with water, the mixture was extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, filtered and concentrated in vacuo. The residue was purified using RP preparative HPLC to provide the titled compound 11g (78 mg, 33%, 2 steps). 1H NMR (400 MHz, DMSO-d6) delta 8.59 (s, 1H), 8.02 (s, 1H), 7.95 (s, 1H), 7.77-7.71 (m, 1H), 7.47 (s, 1H), 7.13 (s, 1H), 6.78 (d, J = 3.2 Hz, 1H), 6.62-6.58 (m, 1H), 5.02-4.92 (m, 2H), 4.71-4.35 (m, 8H), 3.71-3.61 (m, 1H), 3.49-3.41 (m, 1H), 3.38-3.15 (m, 5H); MH+ 549.

I am very proud of our efforts over the past few months and hope to Sodium 1,2,4-triazol-1-ide help many people in the next few years.

Reference:
Article; Lee, Suk Ho; Kim, Min Ju; Lee, Sung-Han; Kim, Jeongmin; Park, Hyun-Ju; Lee, Jinhwa; European Journal of Medicinal Chemistry; vol. 46; 7; (2011); p. 2662 – 2675;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics