S News New downstream synthetic route of 7343-33-1

I am very proud of our efforts over the past few months and hope to 5-Bromo-1H-1,2,4-triazole help many people in the next few years.

Related Products of 7343-33-1, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, molecular formula is C2H2BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

3-bromo-1H-1,2,4-triazole (32.1 mg, 0.217 mmol) and BF3OEt2 (54 mul, 0.426 mmol) were added to a stirred solution of Intermediate 6 (26.0 mg, 0.043 mmol) in 1,2- dichloroethane (0.43 ml). The reaction mixture was a light yellow solution that was heated to 50°C. After 1.75 hr, LCMS and 1H NMR showed complete consumption of Intermediate 6. The reaction mixture was cooled to room temperature, the solvent was evaporated, and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and separated using a single HPLC run on a 19 x 150 mm Sunfire Prep C18 OBD 10 mum column by eluting with acetonitrile/water + 0.1percent TFA. The HPLC fractions containing the fastest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6A (3.6 mg) as a white solid. The HPLC fractions containing the second eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6B (13.1 mg) as a white solid. The HPLC fractions containing the slowest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6C (5.8 mg) as a white solid.EXAMPLE 6A:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.81 (d, 3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.94 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.40-1.44 (m), 1.46-1.65 (m), 1.73-1.96 (m), 2.11-2.22 (m), 2.43 (broad dd, 1H, H13), 2.79 (broad d, 1H), 2.84 (s, 1H, H7), 3.49 (d, 1H), 3.53 (d, 2H), 3.60 (d, 1H), 3.73 (broad d, 1H), 3.94 (d, 1H), 5.50 (dd, 1H, H5), 5.72-5.80 (broad m, 1H, H14), 9.29 (broad s, 1H, triazole). Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6B:1H NMR (CD3OD, 600 MHz, ppm) delta 0.75 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (d, 3H, Me), 0.83 (d, 3H, Me), 0.84 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.91 (s, 3H, Me), 1.13 (s, 3H, Me), 1.19 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.43 (m), 1.46-1.56 (m), 1.58-1.64 (m), 1.72-1.95 (m), 2.09-2.21 (m), 2.30 (dd, 1H, H13), 2.83 (s, 1H, H7), 2.85 (d, 1H), 3.48 (d, 1H), 3.48 (d, 1H), 3.54 (dd, 1H), 3.60 (d, 1H), 3.88 (d, 1H), 3.95 (d, 1H), 5.47 (dd, 1H, H5), 5.71-5.77 (m, 1H, H14), 8.10 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6C:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.77 (d, 3H, Me), 0.82 (d, 3H, Me), 0.85 (d, 3H, Me), 0.86 (s, 3H, Me), 0.86 (d, 3H, Me), 0.89 (d, 3H, Me), 0.92 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.44 (m), 1.48-1.65 (m), 1.76-1.96 (m), 2.11-2.22 (m), 2.41 (dd, 1H, H13), 2.72 (d, 1H), 2.84 (s, 1H, H7), 3.47 (d, 1H), 3.50 (d, 1H), 3.52 (dd, 1H), 3.58 (d, 1H), 3.72 (d, 1H), 3.91 (d, 1H), 5.48 (dd, 1H, H5), 5.51-5.57 (m, 1H, H 14), 8.52 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).

I am very proud of our efforts over the past few months and hope to 5-Bromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

9/29/2021 News New learning discoveries about 64922-04-9

In the meantime we’ve collected together some recent articles in this area about 64922-04-9 to whet your appetite. Happy reading!

Application of 64922-04-9, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 64922-04-9, name is Ethyl 1H-1,2,4-triazole-5-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of Intermediate 1: 4-(3-Methanesulfonyloxymethyl-[l,2,4]triazol-l- yl)-piperidine-l-carboxylic acid tert-butyl esterStep 1: 4-(3-Methoxycarbonyl-[l,2,4]triazol-l-yl)-piperidine-l-carboxylic acid tert-butyl ester; To a solution of IH-[1, 2,4]triazole-3-carboxylic acid ethyl ester (1.05 g, 8.23 mmol) in dimethylformamide (50 rnL) was added sodium hydride (60%, 0.395 g, 9.88 mmol). The solution was stirred at room temperature for 20 minutes followed by 1 hour at 70 0C. 4-methanesulfonyloxy-piperidine-l-carboxylic acid tert-butyl ester (2.3 g, 8.23 mmol) was then added in a single portion and heated at 70 0C for 40 hours. The solution was cooled to 0 0C and the salt precipitate was removed by filtration. The filtrate was diluted with dichloromethane and washed with water, brine, dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by flash chromatograph on silica gel with Hexanes and EtOAc to afford the desired product. 1H NMR (CDCl3): 5 8.18 (IH, s), 4.40 (IH, m), 4.22 (2H, m), 3.96 (3H, s), 2.82 (2H, m), 2.12 (2H, m), 1.94 (2H, m), 1.41 (9H, s).

In the meantime we’ve collected together some recent articles in this area about 64922-04-9 to whet your appetite. Happy reading!

Reference:
Patent; METABOLEX, INC.; WO2009/14910; (2009); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

September 29, 2021 News Never Underestimate The Influence Of 956317-36-5

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, hurry up and to see.

Application of 956317-36-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride(WSCHCl) (37.4 g, 0.20 mol) was added to a solution of Nethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanaminedihydrochloride (50 g, 0.16 mol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (33.9 g, 0.18 mol), 1-hydroxy-1H-benzotriazolehydrate (HOBtH2O) (26.4 g, 0.20 mol) and triethylamine (TEA)(39.5 g, 0.39 mol) in THF (500 mL) at 0 C, followed by stirring atroom temperature for 20.5 h. The solvent of the reaction solutionwas distilled off under reduced pressure. An aqueous NaHCO3 solutionand EtOAc were added to the resulting residue, followed byextraction with EtOAc. The organic layer was washed with water,and the solvent was distilled off under reduced pressure to yieldthe crude product (72 g). An additional 196.7 g of the crude productwas synthesized using the same method from N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanamine dihydrochloride(140 g, 0.46 mol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoicacid (94.8 g, 0.50 mol). The obtained crude product (268.7 g) wasrecrystallized with heptane and EtOAc. The deposited solid wasthen collected by filtration. The obtained solid was dried by heatingunder reduced pressure to yield the title compound 27e as acolorless powder (217.3 g).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, hurry up and to see.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S-21 News Simple exploration of 7170-01-6

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-1,2,4-triazole (0.45 g). After hydrogen gas evolution ceased, 2-chloro-4-fluorophenyl-(5H,11H-pyrrolo[2,1-c][1,4]benzo-diazepine-10-yl)-methanone (1.70 g) was added and the reaction mixture was heated in a sand bath at 110 C. for 18 hours. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 1.25 g of the title compound as colorless crystals, m.p. 191-193 C., MS m/z: 404.1 (M+H)+.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Patent; American Cyanamid Company; US6831079; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

September 29, 2021 News Interesting scientific research on 16681-65-5

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 16681-65-5

Intermediate 13: bis(1-methyl-1H-1,2,3-triazol-5-yl)methanoneA solution of 1 -methyl- lH-1, 2, 3-triazole (0.954 g, 11.4 mmol, prepared according to PCX Int. AppL, 2008098104) in THF (22 mL) was stirred at-70 C under argon while -BuLi (2.56 M in hexanes, 4.29 mL, 11.0 mmol) was added dropwise over 5 minutes. After stirring for another 5 minutes, a solution of ethyl mefhoxy(methyl)carbamate (0.665 g, 4.99 mmol) in THF (3 mL) wras added dropwise over 5 minutes. After stirring at ~-70 C for an additional 5 minutes, the cold bath was removed and the light slurry was allowed to warm to room temperature with stirring for 1 hour 20 minutes. The reaction was then quenched at room temperature with 5 M aqueous H4CI (3 mL) and the aqueous layer was extracted with THF (1 x 6 mL). The combined organic layers were dried (Na2S04), filtered, and concentrated. A portion of the residue was crystallized from -’30 mL toluene to provide, after washing the filter cake with ether (1 > 3 mL) and heptane (1 x 3 mL), to yield the title compound as blunt needles.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-65-5

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

28-Sep-2021 News Discover the magic of the 956317-36-5

In the meantime we’ve collected together some recent articles in this area about 956317-36-5 to whet your appetite. Happy reading!

Electric Literature of 956317-36-5, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A round bottom flask equipped with a magnetic stirrer bar was successively charged with5-methyl-2-(2H-1,2,3-triazole-2-yl)benzoic acid (3.0 g, 14.8 mmol, 1 equiv),N-hydroxysuccinimide (1.84 g, 15.54 mmol, 1.05 equiv), EDC hydrochloride (3.04 g, 15.54 mmol, 1.05 equiv), and dichloromethane (74 mL). The reaction mixture was stirred at ambient temperature for 1.5 h, followed by addition of H20 (74 mL). The aqueous layer was separated and extracted twice with dichloromethane (74 mL). The combined organiclayers were washed in brine, dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure, yielding 2,5 -dioxopyrrolidin- 1 -yl 5 -methyl-2-(2H- 1 ,2,3-triazole-2-yl)benzoate (4.4 g, 99 %) as a brownish solid.?H NMR (500 MHz, CDC13) oe = 7.84 (s, 2H), 7.79 (d, J = 8.25 Hz, 1H), 7.77 (d, J = 1.35 Hz, 1H), 7.52 (dd, J = 1.40, 8.25 Hz, 1H), 2.85 (br s, 4H), 2.48 (s, 3H)?3C NMR (125 MHz, CDC13) oe = 168.9, 162.3, 139.0, 136.7, 136.2, 134.3, 131.2, 124.1,121.4, 25.8, 21.1

In the meantime we’ve collected together some recent articles in this area about 956317-36-5 to whet your appetite. Happy reading!

Reference:
Patent; SANDOZ AG; HOeFERL-PRANTZ, Kathrin; BARTH, Roland; RICHTER, Frank; ZUPANCIC, Borut; (126 pag.)WO2016/20403; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S News Now Is The Time For You To Know The Truth About 6818-99-1

If you are hungry for even more, make sure to check my other article about 6818-99-1, the application of this compound in the production field has become more and more popular.

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 6818-99-1, name is 3-Chloro-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 6818-99-1

A solution of 4-[5-(6-chloro-3-ethylsulfonyl-2-pyridyl)-4-methyl-1 ,2,4-triazol-3-yl]-6-(trifluoromethyl) pyrimidine (300 mg, 0.693 mmol) and 3-chloro-1 H-1 ,2,4-triazole (107.6 mg, 1.04 mmol) in pyridine (3 ml) unter argon was heated in the microwave at 120C for 30 minutes. After cooling, the reaction mixture was poured onto iced water (20 ml), the suspension filtered and the solid washed with cold water. This residue was dissolved in dichloromethane, dried over sodium sulfate, filtered and concentrated to dryness to afford the title compound 4-[5-[6-(3-chloro-1 ,2,4-triazol-1-yl)-3-ethylsulfonyl-2- pyridyl]-4-methyl-1 ,2,4-triazol-3-yl]-6-(trifluoromethyl)pyrimidine (compound P48) as a solid, mp 261- 263C. LCMS (method 1 ): 500/502 (M+H)+; retention time: 0.96 min. H-NMR (CDCI3, ppm) 1.38 (t, 3H), 3.72 (q, 2H), 4.14 (s, 3H), 8.25 (d, 1 H), 8.73 (d, 1 H), 8.79 (s, 1 H), 9.07 (s, 1 H), 9.48 (s, 1 H).

If you are hungry for even more, make sure to check my other article about 6818-99-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; MUEHLEBACH, Michel; JUNG, Pierre, Joseph, Marcel; EDMUNDS, Andrew; EMERY, Daniel; BUCHHOLZ, Anke; (145 pag.)WO2017/16910; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

28-Sep News Chemical Properties and Facts of 151899-62-6

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 151899-62-6, and we look forward to future research findings.

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 151899-62-6, name is 3-Iodo-1-trityl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 3-Iodo-1-trityl-1H-1,2,4-triazole

Nitrogen gas was bubbled through a solution of 3-iodo-1-trityl-1H-1,2,4-triazole (i-28, 37.3 g, 85.35 mmol) and triethylamine (17.8 ml, 128 mmol) in anhydrous DMF (300 ml) heated at 35 C. for 30 mins. Pd(PPh3)2Cl2 (2.4 g, 3.4 mmol) and CuI (651 mg, 3.4 mmol) were added followed by addition of ethynyltrimethylsilane (18 ml, 128 mmol) in anhydrous DMF (18 ml) over 15 hours via syringe pump. After complete addition the mixture was heated at 35 C. for a further 5 hours. The mixture was poured into water (700 ml) and extracted with EtOAc (3×300 ml). Combined EtOAc layers were washed with water (2×500 ml), sat. NaCl (250 ml), dried over Na2SO4, filtered and evaporated. The residue was purified by MPLC on silica gel eluting with a gradient from 100% hexanes to 10% EtOAc in hexanes to afford the title compound. 1HNMR (500 MHz, CDCl3) delta: 7.96 (s, 1H), 7.37 (m, 9H), 7.14 (m, 6H), 0.27 (s, 9H)

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 151899-62-6, and we look forward to future research findings.

Reference:
Patent; Morriello, Gregori J.; DeVita, Robert J.; US2008/280836; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S-21 News Why Are Children Getting Addicted To 82767-64-4

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 82767-64-4.

Electric Literature of 82767-64-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 82767-64-4, name is 3-Bromo-5-cyclopropyl-1H-1,2,4-triazole, molecular formula is C5H6BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 294; cis-4-(5-Cyclopropyl-1 H-[1 ,2,4]triazol-3-yl)-4-hydroxy-1 – phenylcyclohexanecarbonitrile and trans-4-(5-cyclopropyl-1 H-[1 ,2,4]triazol-3-yl)-4- hydroxy-1-phenylcyclohexanecarbonitrile1.0 g of 3-bromo-5-cyclopropyl-1 H-[1 ,2,4]triazole was dissolved in 25 ml of anhydrous THF and 4.7 ml of a 2.7 M solution of n-butyllithium in HEP were added dropwise at -75C. The mixture was stirred at -65C to -75C for 2 h, and then a solution of 1.3 g of 4-oxo-1 -phenylcyclohexanecarbonitrile in 10 ml of anhydrous THF was added dropwise. The mixture was stirred at -65C to -75C for 1 h, subsequently warmed to room temperature and added to 100 ml of a saturated aqueous sodium hydrogencarbonate solution. The mixture was extracted three times with 50 ml each of EA. The combined organic phases were dried over magnesium sulfate and the solvent was removed in vacuo. Chromatography on reversed phase silica gel yielded 590 mg of the title compound (cis/trans mixture) as an amorphous solid. MS (ESI+): 309

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 82767-64-4.

Reference:
Patent; SANOFI-AVENTIS; WO2008/148468; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

S News New downstream synthetic route of 930-33-6

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazol-3(2H)-one.

Synthetic Route of 930-33-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one, molecular formula is C2H3N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

5-[5-Amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-(5-oxo-4,5-dihydro[1,2,4]triazol-1-yl)benzonitrile (I-A-Q1-002) 2,4-Dihydro[1,2,4]triazol-3-one (11 mg, 0.13 mmol) and potassium carbonate (18 mg, 0.13 mmol) are added to a solution of 5-[5-amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-fluorobenzonitrile (50 mg, 0.11 mmol) in DMF (2 ml). The reaction mixture is stirred at 80 C. for 15 min, cooled to room temperature, poured into water (5 ml) and extracted with ethyl acetate (5 ml). The organic phase is washed with water (5 ml), dried over sodium sulphate and concentrated using a rotary evaporator. Purification by chromatography on silica gel using cyclohexane/ethyl acetate 2/1 to 1/3 gives 5-[5-amino-4-(3-chloro-5-trifluoromethylphenyl)-3-trifluoromethylpyrazol-1-yl]-2-(5-oxo-4,5-dihydro[1,2,4]triazol-1-yl)benzonitrile (8 mg, 0.016 mmol, 12%).log P(HCOOH): 3.451H NMR (DMSO-d6): 8.28 (d, 1H, J=2.3 Hz), 8.24 (d, 1H, J=1.2 Hz), 8.12 (dd, 1H, J=8.8 and 2.4 Hz), 7.87 (d, 1H, J=8.8 Hz), 7.79 (s, 1H), 7.69 (s, 1H), 7.60 (s, 1H), 5.96 (s, 2H)

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazol-3(2H)-one.

Reference:
Patent; Bayer Crop Science AG; US2011/190365; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics