Category: Triazoles

41253-21-8, Adding a certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8.

A suspension of 2,5-diflurobenzonitrile (4.5 g, 32.35 mmol) and 1,2,4-triazole sodium salt (3.6 g, 40 mmol) in dimethylformamide (40 mL) was heated at 80 C. for 15 h. The reaction mixture was then cooled, diluted with CH2Cl2 (200 mL), washed with water (3×30 mL) and brine (30 mL), then dried (Na2SO4), filtered and concentrated to give a white solid which was purified by flash column chromatography (SiO2) using 1:1 to 3:1 ethyl acetate/Hexanes to afford the title compound (2.98 g, 49% yield) as a white powder. 1H NMR (500 MHz, CDCl3) ?: 8.70 (1H, s), 8.18 (1H, s), 7.76 (1H, dd, J=9.0, 4.8 Hz), 7.55 (1H, dd, J=7.3, 2.8 Hz), 7.51-7.47 (1H, m). LCMS (M+H) calcd for C9H6FN4: 189.17; found: 189.10.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Sodium 1,2,4-triazol-1-ide, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Naidu, B. Narasimhulu; Banville, Jacques; Beaulieu, Francis; Connolly, Timothy P.; Krystal, Mark R.; Matiskella, John D.; Ouellet, Carl; Plamondon, Serge; Remillard, Roger; Sorenson, Margaret E.; Ueda, Yasutsugu; Walker, Michael A.; US2005/267105; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life.

In the reactor,Add 250mL of acetone,Stirring,26.2 g of 2-iodo-5-methylbenzoic acid,Then 34.5 g of potassium carbonate was added,0.38 g copper iodide (Cul),1,2,3-triazole 7.6g.External temperature was raised to 70 C,During the heating process, a large amount of gas is generated,The reaction was refluxed for 5 hours.Then the reaction mixture was distilled under reduced pressure, the reaction system is more viscous, add 30mL of water, continue to reduce the steam distillation to no acetone (no acetone gas phase). 300mL of water was added to the residue after distillation, and 6mo 1 / L hydrochloric acid was added dropwise at room temperature to adjust the pH of the system to 1-2, resulting in a khaki-colored suspension liquid. Stirred for 15 minutes, filtered, washed with water three times,Each 50mL. The resulting solid was dried at 70 C in vacuo to dryness,Have pale green solid 19.45g,For crude compound (1-1), the purity was 95.20%.With stirring, 7.5 kg of acetone, 0.94 kg of crude compound (1-1) and 0.194 kg of sodium hydroxide were added to the reaction kettle. Stirred at 20 C-30 C for 14 hours. Centrifugation, The filter cake was washed 3 times with acetone, each time 3kg. The resulting solid was transferred to the reaction kettle , 5.65 kg of water was added, 0.14 kg of diatomaceous earth was added and stirred for 1 hour. Filtration, the filtrate was transferred to the reaction kettle, hydrochloric acid was added dropwise to adjust the pH to 1-2, a large amount of white solid formed and stirred for 1 hour. Filtered, the filter cake was washed with water three times, each time 3kg. The resulting solid was dried at 60 C in vacuo to dryness, 0.71 kg white solid, represents Compound (I-1), purity 99.97%, Isomeric compound (1-2) less than 0.1%.

The chemical industry reduces the impact on the environment during synthesis 1H-1,2,3-Triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; He Bifei; Fan Yuping; (6 pag.)CN104649983; (2018); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

6086-21-1, Adding some certain compound to certain chemical reactions, such as: 6086-21-1, name is 1-Methyl-1,2,4-triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6086-21-1.

Example 133.; Preparation of 8-(1-ethyl-propyl)-3-[3-methoxy-5-(2-methyl-2H-[1,2,4]triazol-3-yl)- thiophen-2-yl]-2,6-dimethyl-imidazo[1,2-b]pyridazine.; A. 5-Bromo-1-methyl-1H-[1,2,4]triazole.; EPO To a -78 ¡ãC solution of l-methyl-1H-[1,2,4]triazole (1.0 mL, 13.20 mmol) and TEtaF (100 mL) is added 1.6 M n-BuLi (8.70 mL, 13.86 mmol). After 45 minutes 1,2- dibromo-l,1,2,2-tetrafluoro-ethane (1.76 mL, 14.52 mmol) is added, the solution is warmed to ambient temperature and stirred for 2 hours. The solution is diluted with EtOAc (200 mL), washed with water (150 mL), brine (150 mL), dried over MgSO4, filtered and concentrated to furnish the title compound (1.37 g, 8.46 mmol, 64percent). 1H NMR (CDCl3) delta 3.82 (s, 3H), 7.78 (s, 1H). LC/MS (m/z): calcd. for C3H4BrN3 (M+H)+: 162.0; found: 161.9.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6086-21-1.

Reference:
Patent; ELI LILLY AND COMPANY; WO2006/102194; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 7170-01-6

EXAMPLE 103 [4-(3-Methyl-1,2,4-triazol-1yl)-2-trifluoromethyl-phenyl](5H,11H-pyrrolo[2,1-c][1,4]benzodiazepin-10-yl)-methanone To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-12,4-triazole (0.45 g).. After hydrogen gas evolution ceased, 4-fluoro-2-trifluoromethyl-phenyl-(5H,11H-pyrrolo[2,1-c][1,4]-benzodiazepine-10-yl)-methanone (1.76 g) was added and the reaction mixture was heated in a sand bath at 110 C for 18 hours.. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane.. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate.. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 0.81 g of the title compound as colorless crystals, m.p. 148-150 C, MS m/z: 438.2 (M+H)+, 875.8 (2M+H)+.

Statistics shows that 7170-01-6 is playing an increasingly important role. we look forward to future research findings about 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; Wyeth; EP1000062; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7170-01-6, A common compound: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

General procedure: In a 10 mL round-bottomed flask, (2S,4R)-4-(2-chloro-4-fluorophenylsulfonyl)-N-(1- cyanocyclopropyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 8b)) (400 mg, 788 imol, Eq: 1.00) was combined with DMA (5 mL) to give a colorless solution. 1H-1,2,4-triazole (111 mg, 1.58 mmol, Eq: 2.00) and cesium carbonate (513 mg, 1.58 mmol, Eq: 2.00) were added. The reaction mixture was heated to 80 C and stilTed for 3h. The reaction mixture was poured into water and extracted with EtOAc (2x). The organic layers were combined, washed with saturated aqueous NaHCO3 solution (lx),water (3x) and brine (lx). The organic layers were dried over Na2SO4 and concentrated in vacuo.The crude material was purified twice by flash chromatography (silica gel, 20g, DCM/MeOH 98/2, 19/1) and (silica gel, 20g, Heptan/AcOEt 1/2, 1/3, 1/4) to yield the title compound as a white foam (264 mg; 60%).: _Example 11 was obtained as a byproduct during the synthesis of example 10 as a white solid (34 mg; 7%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C10H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 956317-36-5.

To a stirred solution of 7(184 mg,0.86 mmol) in DMF (5 ml) was added 92) (174 mg, 0.86 mmol), EDCI (198 mg, 1.03 mmol), HOAt (140 mg, 1.03 mmol), and N-methylmorpholine(0.5 ml, 4.30 mmol), the resulting mixture was stirred for 16 h at room temperature. The reaction mixture was diluted with EtOAc, sat.NaHCO3 aq, and organic phase was separated, the aqueous mixture was extracted with EtOAc. The organic phase and extracts were combined, dried over Na2SO4, and concentrated in vacuo. The residue was chromatographed on SiO2(Hexane- EtOAc = 2 : 1) to give 8 (300mg,87%) as a colorless oil. The 1H NMR and 13C NMR data for this compound was extremely complicated due to its existence as rotamers.1H NMR (500 MHz, CDCl3):delta 7.92-7.75 (3H, m), 7.33-7.10 (2H, m), 4.87-2.90 (7H, m), 2.41 (3H, s),2.19-1.88 (1H, m), 1.71-1.37 (10H, m), 1.31-1.10 (3H, m); 13C NMR(125 MHz, CDCl3): delta 169.59, 169.43, 168.98, 168.76, 154.89, 154.69,154.44, 138.16, 138.11, 137.81, 135.36, 135.24, 133.65, 133.57, 133.30, 130.12,129.52, 129.44, 129.03, 128.93, 128.27, 128.11, 127.95, 122.22, 122.13, 121.90,121.83, 79.54, 79.39, 52.02, 51.30, 48.16, 47.53, 46.39, 46.16, 45.49, 45.10,44.76, 44.41, 43.40, 42.96, 42.43, 42.03, 41.53, 41.16, 39.44, 36.85, 36.40,35.81, 35.02, 34.76, 34.47, 33.89, 29.40, 28.24, 28.16, 20.73, 20.67, 19.76,19.5517.96, 17.57, 17.33, 16.67; IR (neat): 1683, 1635 cm-1; MS (EI)m/z 399 (M+);HRMS (EI) calcd for C21H29N5O3:399.2270 (M+), found: 399.2273; [alpha]17 D -34.9 (c0.9, CHCl3).

The synthetic route of 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Article; Minehira, Daisuke; Takahara, Satoyuki; Adachi, Isao; Toyooka, Naoki; Tetrahedron Letters; vol. 55; 42; (2014); p. 5778 – 5780;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

16681-65-5, These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A suspension of 6-bromo-3-chloroisoquinoline (60 mg, 0.25 mmol), 1 -methyl- 1 H-1 ,2,3-triazole (41 mg, 0.50 mmol), Pd(OAc)2 (2.22 mg, 9.9 umol) and KOAc (49 mg, 0.50 mmol) in DMA (4 mL) was stirred at 150^ under microwave irradiation for 60 minutes. The reaction mixture was diluted with brine and extracted with EtOAc. The combined organic layers were washed with water and dried with Na2S04 and concentrated in vacuo. The residue was purified using Biotage silica gel column chromatography eluting with 40% EtOAc in cyclohexane to afford the title compound as a white solid (19 mg, 31 %). 1 H NMR (500 MHz, CDCI3) : delta .17 (t, J = 0.9 Hz, 1 H), 8.15 (dt, J = 8.5, 0.9 Hz, 1 H), 7.94 – 7.85 (m, 2H), 7.82 (d, J = 1 .1 Hz, 1 H), 7.67 (dd, J = 8.5, 1 .6 Hz, 1 H), 4.19 (s, 3H). LCMS (ESI) Rt = 2.00 minutes MS m/z 245 [M+H]+

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16681-65-5.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; HOELDER, Swen; BLAGG, Julian; CHEUNG, Jack; ATRASH, Butrus; SHELDRAKE, Peter; WO2014/37751; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 41253-21-8

To a solution of 2,4-difluorobenzonitrile (10 g, 72 mmol) dissolved in tetrahydrofuran (20 mL), and dimethylformamide (40 mL) was added the sodium salt of 1,2,4-triazole (6.3 g, 70 mmol) and the mixture was stirred at 90 C. for 3 h, filtered and concentrated. The residue was adsorbed onto Silica gel and purified by flash chromatography eluting with 0%-10%-30% ethylacetate/hexanes to give 4-fluoro-2-(1H-1,2,4-triazol-1-yl)benzonitrile as colorless needles (2.46 g, 18%) and 4-(1H-1,2,4-triazol-1-yl)-2-fluorobenzonitril as a white solid (0.746 g, 6%). 4-Fluoro-2-(1H-1,2,4-triazol-1-yl)benzonitrile. Colorless needles (2.46 g, 18% yield) 1H NMR (500 MHz, CDCl3) delta 8.89 (1H, s), 8.19 (1H, s), 7.85 (1H, dd, J=8.7, 5.6 Hz), 7.60 (1H, dd, J=8.8, 2.4 Hz), 7.28-7.24 (1H, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13. 4-(1H-1,2,4-Triazol-1-yl)-2-fluorobenzonitrile. White solid (0.746 g, 6% yield) 1H NMR (500 MHz, CDCl3) delta 8.66 (1H, s), 8.15 (1H, s), 7.79 (1H, dd, J=8.5, 6.7 Hz), 7.69 (1H, dd, J=9.5, 1.8 Hz), 7.65-7.63 (1H, m). LCMS (M+H) calcd for C9H6N4F: 189.05; found: 189.13.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41253-21-8, its application will become more common.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, A new synthetic method of this compound is introduced below., 6523-49-5

A mixture of the formamidine from step 1 (528 mg) and 4-triazolylaniline (294 mg) in AcOH (5 ml) was heated to 125 for 3 h. After cooling, the mixture was diluted and basified with IN NaOH (80 ml). The resulting cream ppt was isolated by filtration, and dried to give the title compound (495mg, 70%).1H NMR delta 10.3 (IH, br s), 9.34 (IH, s), 8.9 (IH, s), 8.67 (IH, s), 8.31 (IH, s),8.23 (IH, dd, J 8.85, 1.9Hz), 8.15 (2H, d, J 8.85Hz), 7.92 (4H, m), 7.19 (2H, d, J8.85Hz), 4.2 (2H, m), 2.72 (2H, m), 2.3 (6H, s); LC-MS rt 1.96 m/z 452 ES+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common compound: 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to Triazoles compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 7343-33-1

3-Bromo-1H-1,2,4-triazole (3 g, 20.28 mmol), copper (II) acetate (7.37 g, 40.56 mmol), phenylboronic acid (4.945 g, 40.56 mmol), pyridine (3.208 mL, 40.56 mmol), and crushed and activated 4 A molecular sieves (15 g) were combined in a 1000 mL round bottom flask. The mixture was diluted with dichloromethane (300 mL), and stirred over the weekend with the cap loose at room temperature. The reaction mixture was filtered through Celite and washed with methanol (approximately 100 mL). Celite was added and the mixture was concentrated to dryness under reduced pressure and purified by silica gel chromatography (80 gram Gold column (ISCO); 0-100percent ethyl acetate/hexane). Possible regioisomer observed in 1H NMR and in LC/MS (impurity runs faster). No separation on normal phase. Combined the desired fractions and concentrated to dryness under reduced pressure. The enriched material was diluted with dimethylsulfoxide and purified by reverse phase chromatography (275 gram Gold C-18 column (ISCO); 10-100percent acetonitrile/water with trifluoroacetic acid modifier). The pure fractions were concentrated to dryness under reduced pressure to give 3-bromo-1-phenyl-1,2,4- triazole (1.72 g, 38percent). 1H NMR (400 MHz, OMSO-de) delta 9.31 (s, 1H), 7.88 – 7.76 (m, 2H), 7.65 – 7.52 (m, 2H), 7.46 (t, J = 7.4 Hz, 1H) ppm. ESI-MS m/z calc. 222.9745, found 223.97 (M+l)+; Retention time: 2.66 minutes.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 7343-33-1, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; BETHIEL, Randy Scott; CAO, Jingrong; COLLIER, Philip, N.; DAVIES, Robert J.; DOYLE, Elisabeth; FRANTZ, James Daniel; GOLDMAN, Brian Anthony; GREY, Ronald Lee; GRILLOT, Anne-laure; GU, Wenxin; KOLPAK, Adrianne Lynne; KRAUSS, Paul Eduardo; LIAO, Yusheng; MAGAVI, Sanjay Shivayogi; MESSERSMITH, David; PEROLA, Emanuele; RYU, Elizabeth, Jin-Sun; SYKEN, Joshua; WANG, Jian; (491 pag.)WO2018/106646; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics