Category: Triazoles

Adding some certain compound to certain chemical reactions, such as: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41253-21-8. 41253-21-8

A mixture of 2,3-difluorobenzylnitrile (2.27 g, 16.3 mmol) and triazole sodium salt (1.33 g, 14.8 mmol) in tetrahydrofaran (5 mL) and dimethylformamide (10 mL) was stirred at 85 C. for 4 h. After concentration, the residue was purified by flash chromatography (SiO2) eluting with 25%-50% ethyl acetate/hexane. The isolated product was recrystallized from hot ethyl acetate/hexane to give the title compound as white needles (1.51 g, 54% yield). 1H-NMR (500 MHz, CDCl3) delta ppm: 8.50 (1H, d, J=2.4 Hz), 8.25 (1H, s), 7.69-7.67 (1H, m), 7.60-7.57 (2H, m). LCMS [M+H]+ calcd for C9H6N4F: 189.16; found: 189.14.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Sodium 1,2,4-triazol-1-ide.

Reference:
Patent; Bristol-Myers Squibb Company; US2007/111984; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 956317-36-5, 956317-36-5

Example 5: Preparation of Compound 5 (S)-(5-methyl-2-(2H-1,2,3-triazol-2-yl)phenyl)(5-(((5-(trifluoromethyl)pyridin-2-yl)amino)methyl)-6-azaspiro[2.5]octan-6-yl)methanone; [Show Image] 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (1eq; prepared according to WO 2008147518), HOBT (1 eq) and EDCl.HCl (1.5eq) dissolved in dichloromethane (5ml/mmol) were stirred at 25C for 0.5-2hours, then intermediate 2 (1 eq) dissolved in dichloromethane was added. After 18 hours the mixture was poured in an aqueous saturated solution of NaHCO3 and extracted with dichloromethane. The crude was purified by silica gel column chromatography (DCM to DCM/MeOH = 9/1) to obtain the title compound with yield of 52%. 1 HNMR (CDCl3) delta ppm 8.22-8.38 (m, 1 H), 7.94-8.14 (m, 1 H), 7.79-7.86 (m, 1 H), 7.69 (m, 1 H), 7.50-7.62 (m, 1 H), 7.28-7.37(m, 1 H), 7.0-7.24(m, 1 H), 6.48-6.66 (m, 1 H), 5.20(m, 1 H), 4.34-4.84 (m, 1 H), 3.89-4.0 (m, 1 H),3.65-3.75 (m, 1 H), 3.21-3.44 (m, 2H), 3.01-3.11 (m, 1 H), 2.26-2.46 (m, 3H), 1.89-2.17 (m, 1 H), 1.02-1.28 (m, 1 H), 0.19-0.63(m, 4H) MS= ESI + m/z 439 [M+H]+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ROTTAPHARM S.P.A.; EP2484674; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, Adding some certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (113 mg, 1.19 mmol) and 3- (trifluoromethoxy)benzylamine (250 mg, 1.31 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (200 mg, 1.31 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’- ethylcarbodiimide) (251 mg, 1.31 mmol) followed by N- methylmorpholine (0.52 mL, 4.76 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using DCM and EtOAc (10:90) as eluents to get the desired amide 9 (108.7 mg, 32 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.67 (br s, 1H), 9.28 (br s, 1H), 8.53 (br s, 1H), 7.48- 7.44 (m, 1H), 7.36-7.34 (m, 1H), 7.30 (br s, 1H), 7.24-7.22 (m, 1H), 4.50 (d, J= 6.4 Hz, 2H); 19F -NMR (376 MHz, DMSO-de): <5 -56.70 ppm. MH+ = 287.2 m/z. Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4928-87-4. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding some certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6. 7170-01-6

b) Trityl chloride (19.0 g) was added portionwise to a stirred solution of 3-methyl-1,2,4-triazole (5.6 g, commercial) and triethylamine (9.5 ml) in dichloromethane (200 ml). The mixture was diluted with dichloromethane (100 ml), washed with water (50 ml), dried over magnesium sulphate and evaporated under reduced pressure to give 1-trityl-3-methyl-1,2,4-triazole (19.0 g).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Methyl-1H-1,2,4-triazole.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 7343-33-1

Example 6 Preparation of 3-bromo-1-(4-(trifluoromethoxy)phenyl)-1H-1,2,4-triazole A dry round bottom flask was charged with 3-bromo-1H-1,2,4-triazole (5 g, 33.8 mmol), CuI (0.644 g, 3.38 mmol), and Cs2CO3 (11.01 g, 33.8 mmol). The flask was evacuated/backfilled with N2, then DMSO (33.8 mL) and 1-iodo-4-(trifluoromethoxy)benzene (4.87 g, 16.90 mmol) were added. The reaction mixture was heated to 100¡ã C. for 36 h. The reaction mixture was cooled to room temperature, diluted with EtOAc, filtered through a plug of Celite? and further washed with EtOAc. Water was added to the combined organics, and the layers were separated. The aqueous phase was neutralized to pH 7, and further extracted with EtOAc. The combined organics were concentrated in vacuo. Purification via flash column chromatography (EtOAc/hexanes) yielded the title compound as an off white solid (3.78 g, 72.6percent): mp 67-69¡ã C.; 1H NMR (400 MHz, CDCl3) delta 8.43 (s, 1H), 7.70 (m, 2H), 7.38 (m, 2H); 19F NMR (376 MHz, CDCl3) delta -58.02. Example 5 Preparation of 3-bromo-1-(4-(trifluoromethoxy)phenyl)-1H-1,2,4-triazole A dry round bottom flask was charged with potassium phosphate (K3PO4, 7.74 g, 36.5 mmol), CuI (0.165 g, 0.868 mmol), and 3-bromo-1H-1,2,4-triazole (2.83 g, 19.10 mmol). The flask was evacuated/backfilled with N2 (3*). DMF (34.7 mL) was added, followed by trans-(1R,2R)-N,N’-bismethyl-1,2-cyclohexane diamine (0.274 ml, 1.736 mmol) and 1-iodo-4-(trifluoromethoxy)benzene (5.000 g, 17.36 mmol). The solution was heated to 110¡ã C. After 48 h, the reaction mixture was cooled to room temperature, diluted with EtOAc and filtered through Celite?. The filtrate was washed with water (100 mL) containing HCl (1 M, 10 mL. The organics were separated, and the aqueous phase was further extracted with EtOAc (3*). The organics were combined, dried, and concentrated in vacuo. Purification via flash column chromatography (EtOAc/hexanes) yielded the title compound as a tan solid (1.86 g, 34percent): 1H NMR (400 MHz, CDCl3) delta 8.44 (s, 1H), 7.70 (d, J=8.9 Hz, 2H), 7.38 (d, J=8.5 Hz, 2H); 19F NMR (376 MHz, CDCl3) delta -58.04; EIMS m/z 307.

Statistics shows that 7343-33-1 is playing an increasingly important role. we look forward to future research findings about 5-Bromo-1H-1,2,4-triazole.

Reference:
Patent; Dow AgroSciences LLC; GIAMPIETRO, Natalie C.; CREEMER, Lawrence C.; CROUSE, Gary D.; US2014/275502; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 184177-83-1, name is 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 184177-83-1, 184177-83-1

Example -3: Preparation of 4-(4-(4-(4-(((3R,5R)-5-((lH-l,2,4-triazol-l-yl)methyl)-5- (2,4-difluorophenyl)tetrahydrofuran-3-yl)methoxy)phenyl)piperazin-l-yl)phenyl)-l- ((2S,3S)-2-(benzyloxy)pentan-3-yl)-lH-l,2,4-triazol-5(4H)-one of the structural formula (III) of crystalline Form B-3 l-((2S,3S)-2-(benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-l-yl)phenyl)- lH-l,2,4-triazol-5(4H)-one (4.0 Kg, 1.0 eq.) of the structural formula (II) was dissolved in Dimethyl sulfoxide (6.0 vol.) at 25¡À2C under nitrogen and cooled to 15-20 C. 25% aqueous sodium hydroxide solution (1.3 eq.) was added to the reaction mixture and was stirred for 10 minutes. ((3S,5R)-5-((lH-l,2,4-triazol-l-yl)methyl)-5-(2,4- difluorophenyl)tetrahydrofuran-3-yl)methyl 4-methylbenzenesulfonate of the structural formula (I) (4.02 Kg) was added to the reaction mixture and continued to stir for lh at 15- 20 C. Reaction temperature was raised to 28¡À2C and stirred for 45-50 h. Ethyl acetate (5.0 vol.) was added to the reaction mass and cooled to 15-20 C followed by addition of water (5.0 vol.), reaction mass was slowly warmed to 25¡À2C and stirred. Layers were separated; organic layer was collected. Aqueous layer was again extracted with Ethyl acetate (3 vol.). Combined organic layers were washed with water (3 vol.) and organic layer was concentrated partially to contain 5.0 Vol. of Ethyl acetate. Cooled the partially concentrated solution to 25¡À2C and was added n-Heptane (5.0 vol.), stirred at 28¡À2C for 30 min and further diluted with n- Heptane (2.0 vol.) heated to 42¡À2C, stirred for 30 min and then slowly cooled to 28¡À2C and continue to stir at 28¡À2C for 2h. The above mixture was cooled to 0-5 C and stirred for lh. Solid was filtered; washed with Heptane (5 vol.). Dried under VTD at 60+5 C to yield 4-(4-(4-(4-(((3R,5R)-5-((lH-l,2,4-triazol- 1 -yl)methyl)-5-(2,4-difluorophenyl)tetrahydrofuran-3-yl)methoxy)phenyl)piperazin- 1 – yl)phenyl)-l-((2S,3S)-2-(benzyloxy)pentan-3-yl)-lH-l,2,4-triazol-5(4H)-one of the structural formula (III) of crystalline Form B-3 with 96% yield. Characteristic Physico-Chemical Data of Crystalline Form B-3 of the Compound of Structural Formula III Physical appearance: Off-white to white solid X-ray Powder Diffraction Pattern: See Figure 3 and Table 3 DSC: See Figure 4 IR: See Figure 5

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BIOCON LIMITED; CHARYULU, Palle, Venkata, Raghavendra; GOWDA, Dharshan, Jakkali, Chandre; RAJMAHENDRA, Shanmughasamy; RAMAN, Manikandan; (41 pag.)WO2017/51342; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

4928-87-4, These common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and (R)- (+)-a-methyl benzyl amine (0.27 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (75:25) as eluents to get the desired amide 17 (88 mg, 20 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): 1H), 7.42-7.40 (m, 2H), 7.34-7.30 (m, 2H), 7.25-7.21 (m, 1H), 5.19-5.12 (m, 1H), 1.50 (d, J= 6.8 Hz, 3H) ppm. MH+ = 217.1 m/z.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4928-87-4.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The iodide 19 (6.04 kg, 23.0 mol), THF (45 E) and DMF (9.0 E) were charged to a vessel. Copper iodide (218 g, 1.15 mol) and potassium carbonate (7.94 kg, 57.4 mol) were added and the mixture heated to an internal temperature of40 C. 1,2,3-Triazole (3.16 kg, 46.0 mol) was added as asolution in THF (6.0 E) over half an hour (no exotherm) andheating continued to 65 C. (again no exotherm observed) and the reaction monitored by HPEC. Once complete N,Ndimethylethylenediamine (244 mE, 2.30 mol) was addedand mixture cooled to RT. Aqueous 3.6 M HC1 (36 E) wasadded (exotherm) and the mixture extracted twice with ethylacetate (2×30 E). The combined organics were washed with EiC1 solution (2×20 E). The acid solution assayed for 3.79 kg of 5 (81%) and 4.64 kg of 5 and 20 combined (99%). A solution of acids 5 and 20 (approx. 4.64 kg, 22.9 mol) in THF and EtOAc (approx. 110 E) was concentrated to lowvolume. THF (90 E) was added and the solvent composition checked by ?H NMR to ensure most ethyl acetate had been removed. Sodium tert-butoxide (2.42 kg, 25.2 mol) was added slowly as a solid over 1-2 h (slight exotherm), allowing the sodium salt to form and stirred overnight at RT. The liquors showed a 45:55 ratio of product:starting material and the solid was collected by filtration, washed with THF (2×20 E) and dried in a vacuum oven (T=40 C.) for 15 h to afford 4.22 kg of crude sodium salt. The crude sodium salt (4.22 kg, 14.9 mol) was charged to a 50 E vessel and 3.6 M HC1 (21.2 E) was added with cooling. The slurry was thenstirred at room temperature for 16 h and the off-white solidisolated by filtration. The cake was washed with water (11E) and iPAc/Heptane (2×5 E), then dried in a vacuum oven(T=35 C.) for 15 h to give 3.10 kg of crude acid 5 (97.9ECAP, 92 wt %, corrected weight 2.85 kg, 61% yield from19). The acid 5 (2.85 kg corrected, 14.0 mol) was chargedto a 50 E vessel and EtOAc (28 E) and dilute 0.22 M HC1 (14 E) were added and the mixture stirred until two clear phases resulted. The aqueous layer was removed and the organic layer filtered to remove any particulate matter. Theethyl acetate was reduced to about 8 E and then heptane (15.6 E) was added over 1 h and the liquors sampled to check for appropriate losses. The solid was isolated by filtration, washed with heptane:ethyl acetate (3:1, 4 E) and dried on the filter under nitrogen to give 2.81 kg of acid 5.m.p. 167.5 C. ?H NMR (400 MHz, d5-DMSO): oe 12.09 (brs, 1H), 8.04 (s, 1H), 7.62 (d, 1H, J=8.4 Hz), 7.58 (d, 1H, J=1.2 Hz), 7.49 (dd, 1H, J=8.4, 1.2 Hz), 2.41 (s, 3H). ?3C NMR (100.6 MHz, d5-DMSO): oe 168.0, 139.2, 136.4, 135.8, 132.5, 130.3, 128.7, 124.8, 20.9. HRMS (ESI): mlz [M+H] calcd for C,0H9N302: 204.0773; found: 204.0781.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-36-8.

Reference:
Patent; MERCK SHARP & DOHME CORP.; Fleitz, Fred; Mangion, Ian; Yin, Jingjun; (11 pag.)US9441254; (2016); B2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 7170-01-6

5-(3-Methyl-[1,2,4]triazol-1-yl)-pyrazine-2-carboxylic acid A mixture of methyl 5-chloropyrazine-2-carboxylate (0.75 g), K2CO3 (1.8 g) and 3-methyl-1H-1,2,4-triazole (1.2 g) in N,N-dimethylformamide (6 mL) is heated to 100 C. overnight. Analysis of the crude mixture by LCMS shows saponified product. The product is acidified with 1 N hydrochloric acid and the precipitate is filtered and washed with water and diethyl ether to afford the title compound. LC (method 20): tR=1.21 min; Mass spectrum (APCI): m/z=206 [M+H]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7170-01-6.

Reference:
Patent; Neurocrine Biosciences, Inc.; Boehringer Ingelheim International GmbH; NOSSE, Bernd; ECKHARDT, Matthias; HIMMELSBACH, Frank; LANGKOPF, Elke; ASHWEEK, Neil J.; HARRIOTT, Nicole; US2014/45823; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-88-0, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-88-0 as follows.

Example 1.17 [0636] Preparation of 1-phenyl-1H-1,2,41 triazole [0637] Operating protocol A (82 C., 48 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 ?l of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. [0638] The degree of transformation and selectivity were 100% and 98% respectively. [0639] The residue obtained following treatment was purified by silica gel chromatography (eluent: hexane/dichloromethane, 100/0 to 50/50). [0640] 264 mg of a dark yellow solid was obtained in a yield of 91%. [0641] Pale yellow needles were obtained after re-crystallisation from chloroform. [0642] The compound obtained had the following formula: [CHEMMOL-00056] [0643] The characteristics were as follows: [0644] MPt: 46 C. (CHCl3) (Lit: 46-47 C. given by Micetich, R G; Spevak, P; Hall, T W; Bains, B K; Heterocycles 1985, 23, 1645-1649); [0645] H NMR/CDCl3:? 8.52 (wide s, 1H, HI), 8.04 (wide s, 1H, H2), 7.53-7.65 (m, 2H, H4,8), 7.26-7.51 (m, 3H, H5,6,7); [0646] 13C NMR/CDCl3: ? 152.55 (C1), 140.88 (C2), 139.96 (C3), 129.73 (C5 and C7), 128.15 (C6), 119.99 (C4 and C8); [0647] GC/MS: Rt=14.02 min, M/Z=145, purity=100%; [0648] Rf=0.21 (eluent: dichloromethane/ethyl acetate, 90/10). Example 1.18 [0649] Preparation of 1-phenyl-1H-[1,2,4]triazole [0650] Operating protocol A (82 C., 24 hours) was followed using 117 mg of Chxn-Py-Al (0.4 mmoles), 336 ?l of iodobenzene (3 mmoles), 138 mg of 1,2,4-triazole (2 mmoles), 1.042 g of caesium carbonate (3.2 mmoles) and 1.2 ml of DMF. [0651] The degree of transformation and selectivity were 79% and 99% respectively. [CHEMMOL-00057] Example 1.19 [0652] Preparation of 1-phenyl-1H-[1,2,4]triazole Example 1.18 was repeated, operating at 50 C. (72 hours). The degree of transformation and selectivity for 1-phenyl-1H-[1,2,4-triazole] were 75% and 99% respectively. [0653] [CHEMMOL-00058]

According to the analysis of related databases, 1H-1,2,4-Triazole, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Cellier, Pascal Philippe; Cristau, Henri-Jean; Spindler, Jean-Francis; Taillefer, Marc; US2003/236413; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics