Category: Triazoles

A common heterocyclic compound, 288-88-0, name is 1H-1,2,4-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-88-0.

A flask was charged with K2CO3 (12.1689 g, 88 mmol), 1H-1,2,4-triazole (2.0042 g, 29 mmol), Cu2O(430 mg, 3 mmol) and 1,10-phenanthroline (1.0452 g, 5.8 mmol) and then evacuated and back-filled with N2. Then, anhydrous DMF (20 ml) and iodobenzene (8.9764 g, 4.92 ml, 44 mmol) were added and the resulting mixture was heated to 120 C for 64 h and then diluted with CH2Cl2 (40 ml). The mixture was filtered through a pad of Celite and the residue washed with CH2Cl2 (20 ml). The resulting organic layer was washed with water (20 ml) and brine (20 ml), dried over MgSO4 and concentrated under reduced pressure. The crude mixture was purified by column chromatography (cyclohexane/ethyl acetate 8/0?2/0) to yield the product as a pale yellow solid (2.986 g, 71%).

The synthetic route of 1H-1,2,4-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Paul, Susann; Schweizer, W. Bernd; Rugg, Graham; Senn, Hans Martin; Gilmour, Ryan; Tetrahedron; vol. 69; 27-28; (2013); p. 5647 – 5659;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

The chemical industry reduces the impact on the environment during synthesis 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, I believe this compound will play a more active role in future production and life. 7170-01-6

A solution of 2,4-difluorobenzonitrile (7.07 g, 50.8 mmol) and 3-methyl-1H-1,2,4-triazole (4.22 g, 50.8 mmol) in N,N-dimethylformamide (45 ml) was treated with powdered anhydrous potassium carbonate (10 g) and the resulting mixture stirred at 22 C. for 18 h. The solid was then filtered and the filtrate concentrated in vacuo. The residue was diluted with ethyl acetate, washed with water and brine, then dried over anhydrous magnesium sulfate and concentrated. The resulting mixture was purified by a combination of chromatography on silica gel (elution gradient of ethyl acetate in hexane) and reversed phase silica gel to yield intermediates 81-84. 4Fluoro-2-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 117-118 C. 1HNMR 400 MHz (CDCl3) ? ppm: 2.54 (3H, s, CH3), 7.24 (1H, m, CH), 7.62 (1H, dd, J=2.5 Hz and J=9.1 Hz, CH), 7.84 (1H, dd, J=5.6 Hz and J=8.6 Hz, CH), 8.82 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40, H, 3.49, N, 27.71; Found: C, 59.25; H, 3.32; N, 27.81. 4-Fluoro-2-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 120-121 C. 1HNMR 400 MHz (CDCl3) ? ppm: 2.56 (3H, s, CH3), 7.30 (1H, dd, J=2.5 Hz and J=8.1 Hz, CH), 7.39 (1H, m, CH), 7.91 (1H, dd, J=5.5 Hz and J=8.6 Hz, CH), 8.06 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40, H, 3.49, N, 27.71; Found: C, 59.35; H, 3.70; N, 27.77. 2-Fluoro-4-(3-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 133-134 C. 1HNMR 400 MHz (CDCl3) ? ppm: 2.52 (3H, s, CH3), 7.61 (1H, dd, J=2 Hz and J=9.1 Hz, CH), 7.67 (1H, dd, J=2 Hz and J=9.6 Hz, CH), 7.79 (1H, dd, J=6.5 Hz and J=8.6 Hz, CH), 8.56 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71; Found: C, 59.42; H, 3.24; N, 28.41. 2-Fluoro-4-(5-methyl-1H-1,2,4-triazol-1-yl)benzonitrile. White crystals (ethyl acetate-hexane); mp 89-90 C., 1HNMR 400 MHz (CDCl3) ? ppm: 2.69 (3H, s, CH3), 7.49-7.55 (2H, m, 2xCH), 7.83 (1H, dd, J=6.8 Hz and J=8.8 Hz, CH), 8.00 (1H, s, CH). Anal. Calcd for C10H7FN4: C, 59.40; H, 3.49; N, 27.71; Found: C, 59.17, H, 3.22, N, 28.01.

The chemical industry reduces the impact on the environment during synthesis 7170-01-6. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Naidu, B. Narasimhulu; Banville, Jacques; Beaulieu, Francis; Connolly, Timothy P.; Krystal, Mark R.; Matiskella, John D.; Ouellet, Carl; Plamondon, Serge; Remillard, Roger; Sorenson, Margaret E.; Ueda, Yasutsugu; Walker, Michael A.; US2005/267105; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 288-36-8

DMF (1.5 ml) was added to a mixture of methyl S-iodo-beta-methyl-l-pyridinecarboxylate D36 (100 mg), lH-l,2,3-triazole (49.9 mg, 0.722 mmol), (lR,2R)-N,N’-dimethyl-l,2- cyclohexanediamine (10.27 mg, 0.072 mmol), CuI (3.44 mg, 0.018 mmol) and Cs2CO3 carbonate (235 mg, 0.722 mmol) in a microwave vial. The mixture was degassed via three vacuum/nitrogen cycles then irradiated in a single mode microwave reactor to 120 0C for 20 minutes. The mixture was irradiated in a single mode microwave reactor to 120 0C for a further 40 minutes. The reaction mixture was cooled and filtered washing the solids with EtOAc. The solids were dissolved in pH = 3 buffer solution (5 ml); UPLC check of this aqueous solution showed it contained a considerable quantity of 6-methyl-3-(2H- l,2,3-triazol-2-yl)-2-pyridinecarboxylic acid. The aqueous phase was extracted repeatedly with DCM; the combined DCM extracts were diluted with MeOH (50 ml) and treated with TMS-diazomethane. The volatiles were evaporated to give a yellow residue that was purified by flash chromatography on silica gel (Biotage, SNAP 1O g column, 10 %-50 % EtOAc/Cy) to give the title compound D39 (38 mg) as a white solid. UPLC (BasicQC_POS_50-800): rt = 0.57 minutes, peak observed: 219 (M+l). C10H10N4O2 requires 218. 1H NMR (400 MHz, CDCl3) delta ppm 8.20 (d, 1 H), 7.87 (s, 2 H), 7.44 (d, 1 H), 3.94 (s, 3 H), 2.71 (s, 3 H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 288-36-8.

Reference:
Patent; GLAXO GROUP LIMITED; ALVARO, Giuseppe; AMANTINI, David; CASTIGLIONI, Emiliano; DI FABIO, Romano; PAVONE, Francesca; WO2010/63662; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

288-36-8, The chemical industry reduces the impact on the environment during synthesis 288-36-8, name is 1H-1,2,3-Triazole, I believe this compound will play a more active role in future production and life.

1,2,3-Triazole (3.45 g, 50 mmol),2-iodo-5-methylbenzoic acid (5.24 g, 20 mmol),Cesium carbonate (11.72 g, 36 mmol),Trans-N, N’-dimethyl-1,2-cyclohexanediamine (0.51 g, 3.6 mmol),Cuprous iodide (0.38 g, 2 mmol),N, N-dimethylformamide (30 mL) were sequentially added into a 100 mL single-necked round bottom flask, and the mixture was gradually heated to 100 C. under a nitrogen atmosphere for reaction for 4 hours. The reaction was stopped, cooled, diluted with tap water and extracted with ethyl acetate (200 mL x 2). The aqueous layer was acidified with concentrated hydrochloric acid (pH = 1-2) and extracted with ethyl acetate (200 mL x 2). The combined organic layers were combined and dried over anhydrous sodium sulfate and filtered. The filtrate was evaporated to dryness under reduced pressure and subjected to column chromatography Purification (dichloromethane / methanol (v / v) = 50/1) afforded the title compound (yellow solid, 2.76 g, 68%).

The chemical industry reduces the impact on the environment during synthesis 1H-1,2,3-Triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, molecular formula is C13H22N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 423165-07-5.

General procedure: To an aqueous solution of active hydrogen containing amide, few drops of aqueous ammonia solution (1 eq.) and secondary amine (1 eq.) were added in drops in an ice-cold solution under constant stirring for dissolution. Aromatic aldehydes dissolved in methanol, added dropwise to the above mixture and stirring was continued for 2 h. The formation of compounds were observed within 30 min. Reaction was monitored by TLC, after completion of reaction, the product was filtered and washed with distilled water and dried at 45-50 C.

The synthetic route of exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane has been constantly updated, and we look forward to future research findings.

Reference:
Article; Viveka, T. Lakshmi; Sharada, L. Nalanda; Asian Journal of Chemistry; vol. 30; 9; (2018); p. 2029 – 2034;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 16681-65-5

Compound 6. To a solution of compound 4 (5 g, 60 mmol, 1 eq.) in THF (120 mL) was added LDA (2M in THF, 45 mL, 1.5 eq.) dropwise at -78 C under N2. After the mixture was stirred at -78 C for 1 h, compound 5 (6.33 g, 90.3 mmol, 6.7 mL, 1.5eq.) was added dropwise at -78 C. The mixture was stirred at -78 C for additional 2 h under N2. The reaction mixture was then poured into ice sat. NH4Cl (100 mL) and extracted with DCM (150 mL x 5). The combined organics were washed with brine (200 mL), dried over Na2SO4, filtered, concentrated, and purified by column chromatography (SiO2, petroleum ether/ethyl acetate (1:1 to 0:1)) to afford compound 6 as a yellow solid. 1H-NMR (CDCl3, 400 MHz) delta 7.61 (s, 1H), 4.16-4.12 (m, 1H), 4.11 (s, 3H), 2.82 (d, J = 5.1 Hz, 1H), 1.37 (tq, J = 4.9, 8.2 Hz, 1H), 0.78-0.66 (m, 2H), 0.57-0.48 (m, 1H), 0.42-0.30 (m, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16681-65-5.

Reference:
Patent; YISSUM RESEARCH DEVELOPMENT COMPANY OF THE HEBREW UNIVERSITY OF JERUSALEM LTD.; SNIR-ALKALAY, Irit; VACCA, Joseph; BEN-NERIAH, Yinon; (238 pag.)WO2019/155468; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

584-13-4, The chemical industry reduces the impact on the environment during synthesis 584-13-4, name is 4H-1,2,4-Triazol-4-amine, I believe this compound will play a more active role in future production and life.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The chemical industry reduces the impact on the environment during synthesis 4H-1,2,4-Triazol-4-amine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

A common heterocyclic compound, 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 217448-86-7.

ExampIe-4: Preparation of l-(2, 6-difIuorobenzyl)-lH-l, 2, 3-triazole-4- carboxylic acid[0029] A mixture of Methyl l -(2, 6-difluorobenzyl)-l H- l, 2, 3-triazole-4- carboxylate. (50 gms) and a solution of sodium hydroxide ( 1 1.76 gms in 100ml water) were stirred at room temperature contents till it becomes clear. Hydrochloric acid (30ml) in DM water (70 ml) was charged to above reaction mass. Adjusted the PH of the reaction till 2-3 by adding the hydrochloric acid solution at 25-30C. After the completion, reaction mass was filtered and dried the material at 65C-70C for 15 hours. Yield: 40gms Example

The synthetic route of Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DAVULURI, Ramamohan Rao; WO2012/25936; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1533519-84-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

In a 100 ml three-necked flask equipped with a stirrer and a thermometer, 25 ml of DMF was added, the intermediate (III)2.67 g, stirred at room temperature, 1.45 g of potassium carbonate was added, and 1.61 g of methyl bromoacetate was added dropwise at 25 C,Stirring was continued for 3 hours; 50 ml of water was added and extracted with ethyl acetate 50 ml x3 to combine the organic phase,The ethyl acetate was concentrated and concentrated, and 50 ml of methanol was added thereto. The crystals were recrystallized, filtered and dried to give 3.22 g of product,Namely intermediate (IV), yield 99.5%.

The synthetic route of 1533519-84-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chengdu Baoyu Pharmaceutical Co., Ltd.; Lei, Lang; Li, Shanwei; Xiong, Bo; (10 pag.)CN105906576; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

1533519-84-4, Adding some certain compound to certain chemical reactions, such as: 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1533519-84-4.

Example 9. Preparation of phenyl 2-((4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate [074] To a round bottom flask was added 4-(4-cyclopropyl-l-yl)-4H-l, 2,4-triazole-3-thiophenol (40.0 g), isopropanol (620 mL) and triethylamine (16.6 g) to form a mixture at room temperature, after stirred for 20 min, the mixture was cooled to 0C, then was added drop wise a solution of phenyl bromoacetate in isopropanol (33.8 g of phenyl bromoacetate was dissolved in 200 mL of isopropanol), during the addiction the mixture was maintained at about 0C, after the addition, the mixture was warm to 20C, after stirred for about 2 hours, the reaction was complete, filtered, the filter cake was washed with isopropanol (100 mL). The filter cake was added purified water (700 mL) to give a slurry, the slurry was stirred for 1 hour, then the purified water was removed by vacuum filtration, the filter case was dried under vacuum at about 50C for about 24 hours to obtain phenyl 2-((4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate, yield 92%, the HPLC purity (area) 99.0%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1533519-84-4.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; CHEN, Weiqiang; LUO, Jian; LIU, Lixue; FAN, Yuping; WO2014/198241; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics