Category: Triazoles

Adding a certain compound to certain chemical reactions, such as: 288-36-8, name is 1H-1,2,3-Triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-36-8, Computed Properties of C2H3N3

To 2-iodo-5-methylbenzoic acid (1.5 g, 5.72 mmol), copper(I) iodide (1.090 g, 5.72 mmol) and (lR,2R)-N,N’-dimethyl-l,2-cyclohexanediamine (0.814 g, 5.72 mmol) was added DMF (10 ml) under nitrogen and then 2H-l,2,3-triazole (0.474 g, 6.87 mmol). The reaction mixture was heated at 120 C at the microwave Personal Chemistry for 15 minutes. UPLC- MS monitor showed that the reaction was complete. After cooling at room temperature water was added and the aqueous washed with EtOAc. Then the aqueous acidified to pH =1 with aqueous 1 M HC1 and extracted with EtOAc. The phases were separated on a hydrophobic frit, the combined organic solvent was removed to give the crude product (2.4 g).The crude compound was purified by silica gel chromatography (SNAP KP-Sil lOOg cartridge) eluted with 5 CV of a mobile phase prepared with DCM (959.04 ml), acetic acid (0.96 ml) and MeOH (40 ml). The evaporation of proper fractions gave a yellow oil which was triturated with toluene (4 x 50 ml) and the title compound D44 was obtained as yellow solid (540 mg).UPLC (Basic GEN QC): rt = 0.35 minutes, peak observed: 204 (M+l) Ci0H9N3O2 requires: 203.1H NMR (400 MHz, DMSO-d6) delta ppm 2.44 (s, 3 H) 7.52 (dd, 1 H) 7.59 (s, 1 H) 7.64 (d, 1 H) 8.06 (s, 2 H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; GLAXO GROUP LIMITED; DI FABIO, Romano; WO2012/89606; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1455-77-2, A common heterocyclic compound, 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 312-amino-6- [(4-fluorophenyl)methyl] -5-methyl-4H- [ 1 ,2,4] triazolo [5,1-b] pyrimidin-7- oneEthyl 2-[(4-flourophenyl)methyl]-3-methyl-3-oxo-propanoate (314 mg , 1.32 mmol was added to 3-amino-5-amino-triazole (100 mg, 1.2 mmol) followed by glacial acetic acid (2.0 mL) and the reaction was heated at 120 ¡ãC under microwave irradiation for 15 minutes The solvent was evaporated and then basified with sodium hydrogencarbonate. The formed precipitate was filtered and washed with water, dichloromethane and MeCN to give the title compound (160 mg 49percent)1H NMR (400 MHz, DMSO-d6) 2.27 (3H, s), 3.77 (2H, s), 5.95 (2H, s), 7.06 (2H, d), 7.23- 7.25 (2H, m). m/z (ES) (M+H)+ 274.

The synthetic route of 1455-77-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; BENGTSSON, Boel, Ase; BLACKABY, Wesley; CUMMING, John; FAULL, Alan, Wellington; LARSSON, Joakim; NASH, Ian, Alun; OLDHAM, Keith; PAPE, Andrew; WO2011/114148; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 16681-70-2, A common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

D. (2S,4R)-5-Biphenyl-4-yl-2-hydroxymethyl-2-methyl-4-[(3H-[1,2,3]triazole-4-carbon)-amino]-pentanoic acid 2-morpholin-4-yl ethyl ester (R4=H; R7=-(CH2)2-morpholine) (2S,4R)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-2-methyl-pentanoic acid (300 mg, 726 mumol, 1.0 eq.), EDCI (770 muL, 6.0 eq.) and HOBt (590 mg, 4.4 mmol, 6.0 eq.) were dissolved in DCM (6 mL). After stirring for 2 minutes, 4-morpholineethanol (879 muL, 10.0 eq.) was added, and the resulting mixture was stirred for 3 hours at room temperature. The mixture was diluted with DCM and washed with saturated sodium bicarbonate. The organic layer was separated, dried and concentrated. The material was purified (reverse phase column: 5-60% MeCN in water with 0.05% TFA over 30 min; compound eluted between 35-45% MeCN in water) and the clean fractions were combined and lyophilized. MeCN (7.2 mL) and 4 M of HCl in dioxane (720 muL) were added to the lyophilized material. The resulting mixture was stirred at room temperature for 0.5 hour and then the solvent was removed to yield the intermediate. 1,2,3-Triazole-4-carboxylic acid (82 mg, 726 mumol, 1.0 eq.), HATU (280 mg, 720 mumol, 1.0 eq.) and DMF (5.8 mL) were combined and the resulting mixture was stirred for 5 minutes. DIPEA (505 muL, 4.0 eq.) and the intermediate were added, and the mixture was stirred for 30 minutes. The reaction was quenched with AcOH and the product was purified by preparative HPLC to yield the title compound (60 mg, 95% purity). MS m/z [M+H]+ calc’d for C28H35N5O5, 522.26. found 522.4.

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 7170-01-6 as follows. category: Triazoles

A mixture of 1.66 g (20 mmol) of 3-methyl-1,2,4-triazole and 16.6 ml of tetrahydrofuran was added dropwise, and 2.29 g (10 mmol) of pure 2-bromoisobutyryl bromide was added dropwise over 30 minutes, The mixture was further stirred for 2 hours, filtered and the insoluble material was filtered off and the filtrate was concentrated to dryness under reduced pressure. 5 ml of methyl tert-butyl ether was added, stirred for 30 minutes, filtered, and the cake was dried to obtain 2.09g of product, yield 90%.

According to the analysis of related databases, 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Ningbo Baisijia Pharmaceutical Technology Co., Ltd.; Jin Chunhua; Tang Jianbo; Wang Kedi; Zhu Qinfeng; (13 pag.)CN106866558; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1001401-62-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

A solution of (3R, 6R)-6-methylpiperidin-3-ol (5.31 g, 46.1 mmol), 2-(2H-l,2,3- triazol-2-yl)benzoic acid (10.5 g, 55.3 mmol), EDC (17.7 g, 92.0 mmol), l-hydroxy-7- azabenzotriazole (12.6 g, 92.0 mmol), and triethylamine (19.3 mL, 138 mmol) in DMF (300 mL) was stirred at 50 C overnight, then diluted with saturated aqueous sodium bicarbonate and extracted 3x with ethyl acetate. The organics were washed with brine, dried over magnesium sulfate, filtered, and concentrated. The crude material was purified by silica gel gradient chromatography (0-100% ethyl acetate in hexanes), providing the titled compound as a pale yellow solid. LRMS m/z (Mu+Eta) 287.3 found, 287.1 required.

The synthetic route of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; SKUDLAREK, Jason, W.; WO2014/137883; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 10570-40-8, name is 4-Methyl-4H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 4-Methyl-4H-1,2,4-triazole

Step 2. 40 mmol of 4-methyl-1,2,4-triazole and 120 mmol of propargyl chloride were stirred under nitrogen at 90 C, and condensed and refluxed for 48 h to complete the quaternization reaction.The reaction product is washed with carbon tetrachloride and steamed to obtain a pale yellow liquid.1,2-Dipropargyl-4-methyl-1,2,4-triazole chloride 8.35 g.

The synthetic route of 4-Methyl-4H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nanjing Tech University; Guan Guofeng; Ding Jing; He Yuting; Li Xue; Yuan Dashui; Wan Hui; Wang Lei; (9 pag.)CN108250227; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Safety of 3-Methyl-1H-1,2,4-triazole

Example 23a 5-(3-Methyl-1H-1,2,4-triazol-1-yl)pyridin-2-amine CuI (285 mg, 20 mol %), L-proline (345 mg, 40 mol %) and potassium carbonate3 (2.07 g, 15.00 mmol) were added to a solution of 5-bromo-pyridin-2-ylamine (CAS 1072-97-5, 1.30 g, 7.50 mmol) and 3-methyl-1H-[1,2,4]triazole (CAS 7170-01-6, 935 mg, 11.3 mmol) in anhydrous DMSO (5 mL). The reaction mixture was heated at 120 C. for 5 days, cooled to r.t., diluted with DCM and filtered through a pad of Celite. The filtrate was concentrated under reduced pressure and the residue was purified by a reversed phase purification (C18-column) using stepped gradients of 20 to 50% MeOH in water (containing 1% NH4OH) to give the title product (153 mg, 12%). 1H NMR (400 MHz, MeOD) delta ppm 2.41 (s, 3H) 6.67 (d, 1H) 7.75 (dd, 1H) 8.24 (d, 1H) 8.72 (s, 1H). MS (ES) m/z 176.2 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; US2012/122843; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C2HBr2N3

3,5-Dibromo-1H-1,2,4-triazole (lnt-1, 834 mg, 3.68 mmol) was dissolved in DMF (15 mL), sodium hydride (60% dispersion in mineral oil, 221 mg, 5.51 mmol) was added carefully in one portion (gas evolution), and the reaction mixture was stirred at room temperature for 30 min. Then, chloro(methoxy)methane (355 mg, 4.41 mmol) was added dropwise and the reaction mixture was stirred at room temperature for 6 h. After that, the reaction mixture was poured into water (40 mL) and extracted with MTBE (2 x 100 mL). The combined organic layers were washed with water (50 mL) and brine (50 mL), dried over sodium sulphate and concentrated in vacuo. The crude product was purified by column chromatography (silica gel, 24 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 30:70 v/v), followed by preparative HPLC (YMC- Actus Triart C18, 100 x 30 mm x 5 muiotaeta, eluting with acetonitrile / (water + 0.1% triethylamine), gradient 20:80 to 98:2 v/v) to yield the title compound as a white solid (798 mg, 80%). HPLC (method LCMS_fastgradient) tR = 0.85 min. 1H NMR (CDCl3, 300 MHz): 3.46 (s, 3 H), 5.43 (s, 2 H). MS (ES+) m/z 270.2, 272.2, 274.2 [M+H, 2 Br isotopes].

The synthetic route of 3,5-Dibromo-1H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1455-77-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1455-77-2 name is 3,5-Diamino-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a stirred solution of IH- 1 ,2,4-triazole-3,5-diamine (1.0 g, 10.1 mmol), methyl 3-oxobutanoate (1.17 g, 10.1 mmol), and 2,4-dichlorobenzaldehyde (1.35 g, 10.1 mmol) in THF (30 mL) and heptane (8 mL) was added piperidine (30 mg, 0.3 mmol) and the reaction was heated to 70 ¡ãC for 2 days. The reaction was concentrated to afford crude methyl 2-amino-7-(2,4-dichlororhohenyl)-5-methyl-4,7-dihydro-[1,2,4]- triazolo[1,5-alpha]pyrimidine-6-carboxylate as a light yellow solid. [00202] HPLC Phenomenex LUNA C-18 4.6 x 50 mm, 0 to 100percent B over 4 minutes, 1 minutes hold time, A = 90percent water, 10percent methanol, 0.1percent TFA, B = 10percent water, 90percent methanol, 0.1percent TFA, RT = 3.03 min, 97percent homogeneity index.[00203] To a stirred solution of crude methyl 2-amino-7-(2,4-dichlorophenyl)-5- methyl-4,7-dihydro-[1,2,4]-triazolo[1,5-fl]pyrimidine-6-carboxylate (10.1 mmol) in CH2Cl2 (100 mL) was added DDQ (2.75 g, 12.1 mmol). The reaction was kept at room temperature for 1 h and was quenched by satd aq NaHCO3 solution. The organic layer was washed with satd aq NaHCO3 and brine prior to drying over anhydrousMgSO4. Filtration, concentration under reduced pressure and purification by silica gel chromatography afforded methyl 2-amino-7-(2,4-dichlorophenyl)-5-methyl-[ 1,2,4]- triazolo[1,5-fir]pyrimidine-6-carboxylate (2.0 g, 56percent) as a light yellow solid. [00204] 1H NMR (400 MHz, CDCl3) delta 7.59 (d, J= 1.8 Hz, 1H), 7.43 (dd, J= 1.8, 7.9 Hz, 1H), 7.29 (d, J= 7.9 Hz, 1H), 4.72 (s, 2H), 3.64 (s, 3H), 2.77 (s, 3H). [00205] HPLC Phenomenex LUNA C-18 4.6 x 50 mm, 0 to 100percent B over 4 minutes, 1 minutes hold time, A = 90percent water, 10percent methanol, 0.1percent TFA, B = 10percent water, 90percent methanol, 0.1percent TFA, RT = 2.85 min, 100percent homogeneity index. [00206] LCMS: Anal. Calcd. for C14H11Cl2N5O2 351.03; found: 352.11 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Diamino-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2006/71752; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, molecular formula is C2H2BrN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 5-Bromo-1H-1,2,4-triazole

Example 6 Preparation of 3-bromo-1-(4-(trifluoromethoxy)phenyl)-1H-1,2,4-triazole A dry round bottom flask was charged with 3-bromo-1H-1,2,4-triazole (5 g, 33.8 mmol), CuI (0.644 g, 3.38 mmol), and Cs2CO3 (11.01 g, 33.8 mmol). The flask was evacuated/backfilled with N2, then DMSO (33.8 mL) and 1-iodo-4-(trifluoromethoxy)benzene (4.87 g, 16.90 mmol) were added. The reaction mixture was heated to 100¡ã C. for 36 h. The reaction mixture was cooled to RT, diluted with EtOAc, filtered through a plug of Celite? and further washed with EtOAc. Water was added to the combined organics, and the layers were separated. The aqueous phase was neutralized to pH 7, and further extracted with EtOAc. The combined organics were concentrated in vacuo. Purification via flash column chromatography EtOAc/hexanes yielded the title compound as an off white solid (3.78 g, 73percent): mp 67-69¡ã C.; 1H NMR (400 MHz, CDCl3) delta 8.43 (s, 1H), 7.70 (m, 2H), 7.38 (m, 2H); 19F NMR (376 MHz, CDCl3) delta-58.02.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7343-33-1, its application will become more common.

Reference:
Patent; Dow AgroSciences LLC; GIAMPIETRO, Natalie C.; CREEMER, Lawrence C.; US2014/275503; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics