Category: Triazoles

Related Products of 6523-49-5,Some common heterocyclic compound, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, molecular formula is C8H8N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of forniamidine from Step 1 (200 mg) and 4-triazolyl-aniline(112 mg, 1 eq) in AcOH (2 ml) was heated to 80 for 16 h. Cooled, concentrated and cautiously treated with sodium bicarbonate (aq). The resulting solid was isolated by filtration, washed with water then DCM:EtOH:NH3 (20:8:1) added and refiltered. The filtrate was concentrated until a precipitate formed which was filtered, washed with ether and dried to give the title compound (129mg, 47%).1H NMR delta 10.06 (IH, s), 9.29 (IH, s), 8.81 (IH, s), 8.63 (IH, s), 8.23 (2H, m),8.07 (2H, d, J 10.0Hz), 7.93 (IH, s), 7.88 (2H, m), 7.83 (IH, m), 7.73 (IH, d, J7.50Hz), 7.35 (IH, t, J 8.75Hz), 3.92 (3H, s); LC-MS rt 2.42 m/z 413 ES+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(1,2,4-Triazol-1-yl)aniline, its application will become more common.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 15988-11-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: General procedure for the synthesis oftriazolo[1,2-a]indazole-trione (1a-g) and2H-indazolo[2,1-b]phthalazine-triones (2a-g)To a well-ground mixture of arylaldehyde (1 mmol), dimedone(0.140 g, 1 mmol) and 4-phenylurazole (0.177 g, 1 mmol) or2,3-dihydrophthalazine-1,4-dione (0.162 g, 1 mmol), was added[Et3N-SO3H]HSO4[(0.028 g, 0.1 mmol) for the preparation of1a-gor (0.042 g, 0.15 mmol] for the synthesis of2a-g}. Theobtained mixture was firstly stirred magnetically at 90C, andafter solidification of the reaction mixture, it was stirred with asmall rod at same temperature. After the reaction was completed(as observed by TLC), the reaction mixture was cooled to roomtemperature, water (2 mL) was added, stirred for 3 min, andfiltered. The solid residue was recrystallized from EtOH/H2O(4/1) to give the pure product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Phenyl-1,2,4-triazolidine-3,5-dione, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Zare, Abdolkarim; Masihpour, Fatemeh; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 191; 8; (2016); p. 1160 – 1165;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 956317-36-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 956317-36-5 name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The amine DBT salt 16 (5,67 kg, 9.09 mol) was charged to a vessel and inerted. DCM (28 L) was added, followed by 4 N Sodium Hydroxide solution (prepared from 10 N NaOH [22,4 L] and water [36 L]), The slurry was then stirred at ambient temperature for 1 h until a solution was obtained. The layers were separated and the aqueous phase treated with sodium chloride solution (10.1 kg in 20 L water). DCM (5 L) was then added and the bi-phasic mixture stirred for 10 min before separating the layers. The combined organic layers were then concentrated under reduced pressure to a 10 L volume. The solution of the free amine was used directly in the next reaction. The triazole acid 5 (13.25 kg, 65.2 mol), DCM (88 L) and DMF (1.35 L, 17.4 mol) were charged to a vessel and the resulting suspension was cooled to 0 C. Oxalyl chloride (8.28 kg, 65,2 mol) was added portion wise keeping the internal temperature between 5 and 10 C (the anhydride formed above 10 C), then the reaction was aged for 30 min at thistemperature. HPLC analysis showed acid 5 remained; an additional charge of oxalyl chloride (160 g, 1.26 mol) was made, and the solution stirred at 5 C for 30 minutes. A solution of the amine (R)-ll (16.5 kg, 62.1 mol) and triethylamine (13.19 kg, 130.0 mol) in DCM (~8 L) was added to the acid chloride over 30 minutes, keeping the internal temperature less than 15 C, The resulting slurry was aged for 30 minutes and then quenched by the addition of water (167 L) over 10 minutes, keeping the internal temperature <15 C. The lower organic layer was removed, and then concentrated under atmospheric pressure to a volume of 100 L. Assay at this stage showed 27.3 kg 1, 98%. The solution was solvent switched to MeCN (ca. 560 L, 20 mL/g) by distillation under reduced pressure at <50 C. The MeCN solution was treated with ecosorb C-941 (2.8 kg) slurried in MeCN (10 L). The resulting slurry was aged for 30 min then filtered through a Solka Flok pad and a 0.1 um cartridge filter washing with MeCN (2 x 30 L). The MeCN filtrate was concentrated under reduced pressure at <50 C to a final volume of ca 112 L. The slurry was cooled to 25 C and water (280 L) added over 40 minutes. The resulting slurry was aged at 20 C for 1 hour, then filtered, washing the cake with 5:1 water: MeCN (60 L) followed by water (40 L). The solid was dried in the vacuum oven with nitrogen purge overnight at 50 C. The final target 1 was isolated as a white solid, 26.72 kg, 95%, 98.5% ee, 99.6 LCAP. m.p. 153.1 C.[Patent; MERCK SHARP & DOHME CORP.; MERCK SHARP & DOHME LIMITED; BAXTER, Carl, A.; CLEATOR, Edward; KRSKA, Shane, W.; SHEEN, Faye; STEWART, Gavin; STROTMAN, Neil; WALLACE, Debra, J.; WRIGHT, Timothy; WO2012/148553; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16681-70-2, HPLC of Formula: C3H3N3O2

1 .92 g (50 % purity, 3.00 mmol) 8-{[2-(trifluoromethyl)phenyl]sulfonyl}-3,8- diazabicyclo[3.2.1 ]octane (Intermediate 3) were reacted in analogy to example 1 , procedure 1 .2 with 0.678 g (6 mmol, 2 eq) 1 H-1 ,2,3-triazole-5-carboxylic acid to yield after work-up and purification 792 mg (62%) of the title compound 1 H-1 ,2,3-triazol-4- yl[(8-{[2-(trifluoromethyl)phenyl]sulfonyl}-3,8-diazabicyclo[3.2.1 ]oct-3-yl]methanone. (0504) LC-MS (Method 1 ): Rt = 0.96 min; MS (ESIpos): m/z = 416 [M+H]+ (0505) 1 H-NMR (400 MHz, DMSO-d6) delta [ppm]: 1 .602 (2.82), 1 .629 (2.52), 1 .689 (12.16), 1 .980 (0.53), 2.073 (1 .54), 2.327 (1 .17), 2.669 (1.20), 2.673 (0.87), 2.934 (3.84), 2.964 (4.10), 3.379 (5.16), 4.293 (5.08), 4.355 (9.64), 4.386 (4.07), 4.519 (0.72), 7.890 (1 .47), 7.908 (5.87), 7.913 (7.23), 7.920 (16.00), 7.927 (6.81 ), 7.932 (7.53), 7.936 (7.64), 7.950 (2.37), 7.955 (1 .54), 8.018 (0.79), 8.030 (7.57), 8.037 (6.89), 8.053 (5.61 ), 8.295 (7.27), 8.31 1 (6.51 ), 8.317 (6.21 ), 15.524 (0.53).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; KOPPITZ, Marcus; SIEBENEICHER, Holger; STEUBER, Holger; TER LAAK, Antonius; NUBBEMEYER, Reinhard; ROTTMANN, Antje; IRLBACHER, Horst; BADER, Benjamin; PETERS, Michaele; WAGENFELD, Andrea; TEREBESI, Ildiko; (123 pag.)WO2017/202817; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8,Some common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 50 mL round-bottomed flask equipped with a magnetic stirbar was added 1-H-l, 2. 3-triazole (0.192 g. 2.78 mmol) and DMF (10 mL) and then cooled to O0C while stirring. Then. sodium hydride (60% dispersion in mineral oil) (0.133 g. 3.33 mmol) is added to the reaction mixture and was slowly allowed to warm to ambient temperature. Then, l-iodo-4 pentyne (0.647 g, 3.33 mmol) was added dropwise. The reaction mixture was then heated to 800C and allowed to stir for 2.5 hours. Water (20 mL) was then added to the reaction mixture and then extracted with ethyl acetate (2 x 20 mL). The organic phase was dried with sodium sulfate and concentrated de vacuo followed by a purification by column chromatography (ethyl acetate/hexane) to produce l-Pent-4-ynyl-lH-[1.2.3]triazole (0.349 g. 93%) as a colorless oil. iH NMR (300 MHz, CDCb) delta 7.67 (s, IH). delta 7.59 (s. IH). delta 4.53 (t. 2H). delta 2.20 (t, 2H). delta 2.17 (m. 2H), delta 2.04 (s, IH) ppm: ?C NMR (75 MHz. CDCb) delta 133.9. 123.9. 82.2, 70.4. 48.7, 28.9. 15.7 ppm: HRMS (ESI) calcd for C7H10N3 (M-) 136.0869, found 136.0866

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NORTH CAROLINA STATE UNIVERSITY; MELANDER, Christian; CAVANAGH, John; RITCHIE, David, F.; ROGERS, Steven, A.; HUIGENS, III, Robert, W.; WO2010/77603; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 15294-81-2, A common heterocyclic compound, 15294-81-2, name is 4,5-Dibromo-1H-1,2,3-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 121: Preparation of 4,5-dibromo-l-methyl-lH-[l,2,3″|triazole and 4,5-dibromo- 2-methyl-2H-[l .2.31triazole(A) (B) To a solution of 4,5-dibromo- IH-[1, 2,3]triazole (2.26 g, 10 mmol) (Example 120) and triethyl amine (1.5 ml, 10 mmol) in dichloromethane (50 ml), was added methyl iodide (625 mul, 10 mmol). The reaction mixture was stirred at room temperature for 24 hours. More triethyl amine (0.75 ml, 5 mmol) and more methyl iodide (312 mul, 5 mmol) were added and the mixture was stirred for 3 hours. The reaction mixture was quenched by addition of aqueous ammonium chloride (saturated) (15 ml). The phases were separated and the organic phase was dried over magnesium sulfate and concentrated. The residue was purified by column chromatography on silica gel (eluent: 10-30percent ethyl acetate in hexane) to give 4,5-dibromo-2-methyl-2H-[l,2,3]triazole (isomer B) (625 mg, 26percent yield) and 4,5-dibromo- 1 -methyl- IH-[1, 2,3]triazole (isomer A) (825 mg, 34percent yield).Isomer A 1H-NMR (400 MHz, CDCl3): 4.09 (s, 3H, Me) ppm. Isomer B 1H-NMR (400 MHz, CDCl3): 4.18 (s, 3H, Me) ppm.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SYNGENTA LIMITED; WO2007/96576; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

584-13-4, name is 4H-1,2,4-Triazol-4-amine, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 4H-1,2,4-Triazol-4-amine

5-(4H-l,2,4-TriazoI-4-ylamino)-4l-methoxybiphenyl-2-carbonitrile (CAB06046) To a solution of 4No.-l ,2,4-triazol-4-amine (3.441 g, 40.928 mmol) in DMSO (40 mL) was added KOtBu (4.593 g, 40.928 mmol). The mixture was stirred for 0.5 hours at room temperature before CAB06042 (4.65 g, 20.468 mmol) was added and stirring was continued for 1 hour. The mixture was poured into crushed ice and neutralized with 2M KHSO4 solution. The precipitate was filtered off and recrystallised from acetone/Et2theta to afford CAB06046 (5.07 g, 85%) as a light yellow crystalline solid. Mp, 176-177 0C; 1H NMR (400 MHz5 OMSO-d6) delta 3.81 (s, 3H)5 6.47 (d, J = 2.4 Hz5 IH)5 6.54 (dd, J = 8.6, 2.4 Hz, IH)3 7.07 (AA5BB’, 2H)5 7.43 (AA’BB 2H), 777 (J = 8.6 Hz, IH), 8.86 (s5 2H), 10.28 (s5 IH); 13C NMR (100.6 MHz, DMSO-^) delta 55.3, 101.2, H LO, 1123, 114.2, 119,1, 129.7, 130.0, 135.6, 144.1, 146.1, 150.8, 159 8; LRMS (ES+): m/z 292.3 (100%, [IvH-H]+); HRMS (ES+) calcd for C16Hj4N5O [M+H]+: 292,1193, found 292.1180; Anal. Calcd for C16Hi3N5O: C, 65.97; H5 4.50; N5 24.04. Found C, 65.9; H5 4,56; N5 23.8.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; STERIX LIMITED; WOO, Lok Wai Lawrence; BUBERT, Christian; WOOD, Paul Michael; PUTEY, Aurelien; PUROHIT, Atul; POTTER, Barry Victor Lloyd; WO2011/23989; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 4928-88-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4928-88-5 name is Methyl 1H-1,2,4-triazole-3-carboxylate, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

EXAMPLE 15 A mixture of methyl 1,2,4-triazole-3-carboxylate (1.27 g, 0.01 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (3.18 g, 0.01 mole) was melted and then 0.076 g of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for 3 hours, while maintaining the temperature of the reaction mixture at 95+-5¡ã C. And then, the reaction mixture was crystallized with 20 ml of butanol to give 2.70 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 85percent).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Methyl 1H-1,2,4-triazole-3-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, A new synthetic method of this compound is introduced below., COA of Formula: C9H7N3O2

Step (vii): tert-butyl N-{4-[(4-methoxyphenyl)methoxy]-2-[2-(2H-l,2,3-triazol-2- yl)benzamido]cyclopentyl}carbamate To a solution of ieri-butyl N-{2-amino-4-[(4- methoxyphenyl)methoxy]cyclopentyl}carbamate (1.71 g, 5.08 mmol) in dry DMF (17 ml) was added 2-(2H-l,2,3-triazol-2-yl)benzoic acid (CAS number 1001401 -62-2; 1.058 g, 5.59 mmol), HATU (2.90 g, 7.62 mmol) and triethylamine (2.125 ml, 15.25 mmol). The reaction was stirred at room temperature for 72 hours. The reaction was partitioned between ethyl acetate and water, washed with brine, dried over magnesium sulfate, concentrated in vacuo and purified by column chromatography (silica, 0-100% ethyl acetate / petrol) to afford the title compound. 1H NMR (400 MHz, DMSO-d6) delta ppm 1.37 (s, 9 H), 1.46 – 1.59 (m, 1 H), 1.58 – 1.77 (m, 1 H), 1.86 – 1.97 (m, 1 H), 2.18 – 2.37 (m, 1 H), 3.67 – 3.79 (m, 4 H), 3.83 – 4.01 (m, 2 H), 4.32 (s, 2 H), 6.85 – 6.95 (m, 2 H), 7.17 – 7.31 (m, 2 H), 7.44 – 7.54 (m, 2 H), 7.55 – 7.66 (m, 1 H), 7.76 (s, 1 H), 7.96 – 8.05 (m, 2 H)MS ES+: 508

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; TAKEDA CAMBRIDGE LIMITED; TAKEDA PHARMACEUTICAL COMPANY LIMITED; FIELDHOUSE, Charlotte; GLEN, Angela; ROBINSON, John Stephen; FUJIMOTO, Tatsuhiko; WO2015/55994; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 15988-11-1, A common heterocyclic compound, 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, molecular formula is C8H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of dimedone (1, 1 mmol), 4-phenylurazole (2, 1 mmol), aromatic aldehyde (3a-h, 1mmol) and S-LCCO nano perovskite (0.01 g) was mixed in a high-pressure Teflon reactor, which was equipped with a magnetic stirrer and an optical fiber, which was implemented to control the reaction’s temperature. The reaction mixture was irradiated by 400 W microwave at 80 oC, for the specified reaction times. TLC with n-hexan:ethylacetate eluent was used to monitor the progress of the reactions. After reaction completion and cooling, the reaction mixtures were filtered and washed with ethanol to separate the catalyst. First, 10 mL water was added to the solution. Then, EtOH/H2O (4:1) was added to crystallize the water insoluble crude products. Then the crystals were filtered to achieve pure products (4a-h).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zahedi, Najmeh; Javid, Ali; Mohammadi, Mohammad Kazem; Tavakkoli, Haman; Bulletin of the Chemical Society of Ethiopia; vol. 32; 2; (2018); p. 239 – 248;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics