Category: Triazoles

Adding a certain compound to certain chemical reactions, such as: 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7170-01-6, Quality Control of 3-Methyl-1H-1,2,4-triazole

A suspension of 6-bromo-7-(dimethoxymethyl)-I ,2,3,4-tetrahydro-I ,8-naphthyridine (intermediate12) (300 mg, 1.045 mmol), 3-methyl-I H-I ,2,4-triazole (104 mg, 1.254 mmol), Cs2CO3 (720 mg,2.210 mmol) and Cul (40 mg, 0.210 mmol) in DMF (2 ml) was heated to 120 C for approximately 6 h. The reaction mixture was diluted with ethyl acetate and water, layers were separated and the aqueous layer was extracted with ethyl acetate (3x). Organic layers were combined, washed with water and brine, dried using Na2SO4, filtered, evaporated. The crude product was purified by silica gel column chromatography eluting with a gradient of MeOH (1-10%) in DCM. Product fractionswere combined, evaporated and dried to yield the title compound as an orange resin. (UPLC-MS 3)tR 0.57 mm; ESI-MS 290.1 [M+H]+. 1H NMR (400 MHz, CDCI3) 5 8.21 (s, I H), 7.21 (s, I H), 5.35 (s, I H), 4.95 (s, I H), 3.51 – 3.41 (m, 2H), 3.36 (s, 6H), 2.75 (t, 2H), 2.47 (s, 3H), 1.97 – 1.86 (m, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; NOVARTIS AG; BUSCHMANN, Nicole; FAIRHURST, Robin Alec; FURET, Pascal; KNOePFEL, Thomas; LEBLANC, Catherine; MAH, Robert; NIMSGERN, Pierre; RIPOCHE, Sebastien; LIAO, Lv; XIONG, Jing; ZHAO, Xianglin; HAN, Bo; WANG, Can; WO2015/59668; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 135242-93-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 135242-93-2 as follows.

To a mixture of (l-methyl-l/-/-l,2,4-triazol-3-yl)methanol (400 mg, 3.54 mmol) and iodobenzene diacetate (1.25 g, 3.89 mmol) in dichloromethane (10 mL) was added TEMPO ((2, 2,6,6- tetramethylpiperidin-l-yl)oxyl) (56 mg, 354 pmol). The mixture was stirred at 15-20C for 2h. The mixture was concentrated in vacuo. The residue was purified by silica gel chromatography (petroleum ethenethyl acetate = 1:2) to give l-methyl-l/-/-l,2,4-triazole-3-carbaldehyde (300 mg, 2.70 mmol, 76% yield). XH NMR (chloroform-d 400 MHz) d 10.01 (s, 1H), 8.19 (s, 1H), 4.06 (s, 3H).

According to the analysis of related databases, 135242-93-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; H. LUNDBECK A/S; KEHLER, Jan; JUHL, Karsten; MARIGO, Mauro; VITAL, Paulo, Jorge, Vieira; JESSING, Mikkel; LANGGARD, Morten; RASMUSSEN, Lars, Kyhn; CLEMENTSON, Carl, Martin, Sebastian; (275 pag.)WO2019/115566; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., name: 1H-1,2,3-Triazole

But-3-yn-1-ol (49.57 g, 707.2 mmol) and triethylamine (107.7 mL, 777 mmol, dried over KOH) were dissolved in dry dichloromethane (500 mL) under a nitrogen atmosphere and cooled to 0 C. Methanesulfonyl chloride (54.8 mL, 708 mmol), dissolved in 500 mL of dry dichloromethane was added within 90 minutes while keeping the temperature below 5 C. The mixture was stirred for 3.5 hours at room temperature, then poured onto 2.5 L of ice water. The organic phase was separated and washed with 2¡Á500 mL of water and 1¡Á250 mL of brine and dried over sodium sulfate. The volatiles were removed to yield 94.18 g of the methane sulfonate (631.2 mmol, 89.2%) as a yellow liquid. A suspension of NaOH (37.86 g, 946.5 mmol), sodium iodide (94.65 g, 631.5 mmol) and 1H-[1,2,3]Triazole (61.03 g, 883.6 mmol) in 2-methyl-2-butanol (750 mL) was refluxed for 1 h under an inert atmosphere. After cooling to room temperature the methane sulfonate (94.18 g, 631.2 mmol) was added within 5 minutes. The resulting suspension was then heated to reflux for 3 hours, cooled to room temperature and concentrated on a rotary evaporator at 45 C. Water (500 mL) and dichloromethane (1 L) were added and the organic phase was separated, dried over sodium sulfate and the volatiles removed at 30 C. The residue was distilled at 1 mmHg . A forerun was collected at 20-70 C. The main fraction distilled at 123-129 C. as a colorless, turbid liquid. After filtration over Celite (filtration over a pad of diatomite) 1-But-3-ynyl-1H-[1,2,3]triazole was obtained as a colorless liquid (29.8 g, 40%). The content according to GC/FID was >98%. 1H-NMR (CDCl3) delta=2.05 (t, 1H, C?CH), 2.75 (dt, 2H, CH2-C?CH), 4.5 (t, 2H, CH2-triazole), 7.65 (s, 1H, triazole), 7.70 (s, 1H, triazole).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bossenmaier, Birgit; Friebe, Walter-Gunar; Georges, Guy; Rueth, Matthias; Voss, Edgar; US2005/197370; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 21-3 (0.2g, 0.36mMol), HOBT (0.05g, 0.4mMol), and 1H-1,2,3- triazole-4-carboxylic acid (0.05g, 0.4mMol) in anhydrous DMF (2mL) was added DIEA (0.18mL,1. ImMoI) followed by EDC (0.08g, 0.4mMol). The solution was heated in the microwave reactor for 12 minutes at 800C. The solution was then treated with 0.5mL of acetic acid and was heated to 800C in the microwave reactor for and additional 10 minutes. Upon cooling to room temperature, the solution was passed through a syringe filter and purified on a Cl 8 reverse phase HPLC to yield 21-4 as the HCl salt. Mass (M+l) calculated: observed: LC/MS (M+l) calculated: 554.6; observed: 554.3.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-[1,2,3]Triazole-4-carboxylic acid, its application will become more common.

Reference:
Patent; MERCK & CO., INC.; WO2006/135627; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, A new synthetic method of this compound is introduced below., Recommanded Product: 3,5-Dibromo-1H-1,2,4-triazole

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C2H4N4

General procedure: Synthesis of triazole Schiff?s bases was reportedpreviously [44]. Briefly, 4-arylimino-1,2,4-triazoles (1-14)and 3-arylimino-1,2,4-triazoles (15-23) were synthesized byrefluxing 4-amino-1,2,4-triazoles, or 3-amino-1,2,4-triazoles(2 mM) with equimolar amounts of substituted benzaldehydeand H2SO4 (2 mL) in ethanol (15 mL) for 4-10 h. Reactionprogress was monitored by TLC under UV light at 254 and365 nm or via exposure to iodine vapours. After completionof reaction, the solvent was vaporised under reducedpressure on a rotary evaporator. Resulting compounds werewashed with hexane and crystallized from ethanol to obtain apure compounds.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 584-13-4, its application will become more common.

Reference:
Article; Choudhary, Muhammad I.; Imad, Rehan; Khan, Khalid M.; Naqeeb, Uzma; Shaikh, Muniza; Siddiqui, Salman; Subzwari, Fakiha; Zafar, Humaira; Medicinal Chemistry; vol. 16; 4; (2020); p. 575 – 591;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 23579-79-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 23579-79-5 as follows.

In a 25 mL round bottomed flask, 3,5-dibromo-1-methyl-1H-1,2,4-triazole (Int-41, 442 mg, 1.84 mmol) was dissolved in DMF (4 mL) and potassium carbonate (483 mg, 3.5 mmol), followed by 3-fluorophenol (200 mg, 1.75 mmol) were added. The reaction mixture was stirred for 18 h at 100 C. After cooling, it was concentrated in vacuo, the residue was purified directly by column chromatography (silica gel, 70 g, eluting with ethyl acetate / n-heptane, gradient 0: 100 to 20:80 v/v) to afford the title compound as white solid (397 mg, 83%). HPLC (method LCMS_fastgradient) tR= 1.05 min. 1H NMR (CDCl3, 300 MHz): delta 3.78 (s, 3 H), 6.94-7.02 (m, 1 H), 7.06-7.14 (2 H), 7.34-7.43 (m, 1 H). MS (ES+) m/z 272.1, 274.1 [M+H, Br isotopes].

According to the analysis of related databases, 23579-79-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; BERCHTOLD, Stefan; GALLEY, Guido; GOERGLER, Annick; JAKOB-ROETNE, Roland; KRUMMENACHER, Daniela; LIMBERG, Anja; NEIDHART, Werner; RATNI, Hasane; REUTLINGER, Michael; RODRIGUEZ SARMIENTO, Rosa Maria; SCHNIDER, Christian; (309 pag.)WO2018/87018; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1001401-62-2, Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

General procedure: A mixture of the primary amine, 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid 31 (0.33 g, 1.6 mmol), N,N-diisopropylethylamine(DIPEA, 2.5 mL, 14.7 mmol), and 1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(HATU, 0.91 g, 2.4 mmol) in DMF (3.2 mL) was stirredat room temperature for 17 h. The reaction was quenched by theaddition of water, and the mixture was extracted with EtOAc.The organic layer was washed with brine, dried over Na2SO4, filtered,and concentrated under reduced pressure. The resulting residuewas purified by preparative HPLC to obtain the title compound7a as a colorless solid (0.18 g, 28% over 2 steps).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Futamura, Aya; Nozawa, Dai; Araki, Yuko; Tamura, Yunoshin; Tokura, Seiken; Kawamoto, Hiroshi; Tokumaru, Yuichi; Kakihara, Sora; Aoki, Takeshi; Ohtake, Norikazu; Bioorganic and Medicinal Chemistry; vol. 25; 20; (2017); p. 5203 – 5215;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

118863-62-0, name is 3-(4-Bromophenyl)-1H-[1,2,4]triazole, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C8H6BrN3

To a solution of 1-iodo-4-(trifluoromethoxy)benzene (15.0 g, 52.0 mmol) in dimethylformamide (90 mL) and water (10 mL) was added 3-(4-bromophenyl)-1H-1,2,4-triazole (C51) (11.0 g, 49.0 mmol), cesium carbonate (34.0 g, 104 mmol), copper(I) iodide (2.80 g, 14.7 mmol), and 8-hydroxyquinoline (2.20 g, 15.0 mmol), and the solution was heated at 140 C. for 8 hours. The cooled solution was decanted from a layer of solid, diluted with a ammonium hydroxide (1N, 100 mL) solution, and extracted with of diethyl ether (2*100 mL). The combined organic layer was dried and concentrated, and the brown solid was eluted through a short silica gel column using 20% ethyl acetate/hexanes as eluent to give the title compound as a light tan solid (9.50 g, 50%): mp 111-113 C., 1H NMR (400 MHz, CDCl3) delta 8.56 (s, 1H), 8.07 (d, J=8.6 Hz, 2H), 7.79 (d, J=8.8 Hz, 2H), 7.62 (d, J=8.6 Hz, 2H), 7.39 (d, J=8.8 Hz, 2H); ESIMS m/z 384 ([M+H]+).

The synthetic route of 118863-62-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DOW AGROSCIENCES LLC; Fischer, Lindsey G.; Baum, Erich W.; Crouse, Gary D.; DeAmicis, Carl; Lorsbach, Beth; Petkus, Jeff; Sparks, Thomas C.; Whiteker, Gregory T.; US2014/274688; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 60166-43-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 60166-43-0 name is 1,4-Dimethyl-1H-1,2,3-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

In a pressure vessel equipped with a magnetic stirring bar, was added (Patent; BRISTOL-MYERS SQUIBB COMPANY; NORRIS, Derek J.; VACCARO, Wayne; DEBENEDETTO, Mikkel V.; DEGNAN, Andrew P.; DELUCCA, George V.; DESKUS, Jeffrey A.; HAN, Wen-Ching; KUMI, Godwin Kwame; SCHMITZ, William D.; STARRETT, John E., JR.; HILL, Matthew D.; HUANG, Hong; (563 pag.)WO2016/183118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics