Category: Triazoles

423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C13H22N4

General procedure: To an aqueous solution of active hydrogen containing amide, few drops of aqueous ammonia solution (1 eq.) and secondary amine (1 eq.) were added in drops in an ice-cold solution under constant stirring for dissolution. Aromatic aldehydes dissolved in methanol, added dropwise to the above mixture and stirring was continued for 2 h. The formation of compounds were observed within 30 min. Reaction was monitored by TLC, after completion of reaction, the product was filtered and washed with distilled water and dried at 45-50 C.

The synthetic route of 423165-07-5 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Viveka, T. Lakshmi; Sharada, L. Nalanda; Asian Journal of Chemistry; vol. 30; 9; (2018); p. 2029 – 2034;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, This compound has unique chemical properties. The synthetic route is as follows., Safety of 3,5-Dibromo-1H-1,2,4-triazole

To a solution of 3,5-dibromo-lH-l,2,4-triazole (5.00 g, 22.04 mmol) in CH3CN (50 ml) was added 2-(2-bromoethoxy)tetrahydro-2H-pyran (5.07 g, 24.24 mmol) and DIPEA (4.00 ml, 24.24 mmol). The resulting solution was heated at 90 C for 3 h.Subsequently, the mixture was cooled and diluted with EtOAc (100 ml). The resulting solution was then washed with a sat. aq. solution of NaHC03 and brine. The organic layer was dried (MgSC^) and concentrated under reduced pressure. The residue was purified by flash column chromatography over silica gel (eluent: DCM/MeOH(NH3) from 100/0 to 97/3). The product fractions were collected and concentrated in vacuo, yielding 6.00 g of intermediate 56 (77 %).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 7411-23-6.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; DE CLEYN, Michel, Anna, Jozef; VAN BRANDT, Sven, Franciscus, Anna; GIJSEN, Henricus, Jacobus, Maria; BERTHELOT, Didier, Jean-Claude; OEHLRICH, Daniel; WO2011/86098; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C3H4BrN3

Step 2. (S)-2-(l-(cyclopropanecarbonyl)-2-methyl-6-(l-methyl-lH-l,2,3-triazol-4-yl)-l,2,3,4- tetrahydroquinolin-5-yloxy)benzonitrile [0440] A mixture of (S)-2-(l-(cyclopropanecarbonyl)-2-methyl-6-(4,4,5,5-tetramethyl-l,3,2- dioxaborolan-2-yl)-l,2,3,4-tetrahydroquinolin-5-yloxy)benzonitrile (0.050 g, 0.1 1 mmol), 4-bromo- 1 -methyl- lH-l ,2,3-triazole (0.025 g, 0.15 mmol), cesium carbonate (0.110 g, 0.34 mmol), [Iota, – bis(diphenylphosphino)ferrocene]dichloropalladium(II) dichloromethane adduct (0.10 g, 0.01 mmol) in l ,4-dioxane(10 mL) and water (3 mL) was stirred overnight at 80 C. The reaction mixture was cooled to room temperature and filtered through a short pad of Celite. The filtrate was concentrated and purified via preparative thin layer chromatography (eluting with 25% ethyl acetate-petroleum ether) to afford (S)-2-(l-(cyclopropanecarbonyl)-2-methyl-6-(l-methyl-lH-l ,2,3-triazol-4-yl)- l,2,3,4-tetrahydroquinolin-5-yloxy)benzonitrile (0.006 g, 13%) as a white solid. MS (ESI, pos. ion) m/z 414[M+H]+. 1H NMR(400 MHz, CD3OD) delta ppm 0.75-0.82(m, 1H), 0.88-1.05(m, 2H), 1.15- 1.25(m, 3H), 1.28-1.35(m, 1H), 1.45-1.55(m, 1H), 1.97-2.05(m, 1H), 2.15-2.25(m, 1H), 2.27- 2.45(m, 1H), 2.60-2.75(m, 1H), 4.09(s, 3H), 4.75-4.85(m, 1H), 6.58(d, J=8.40 Hz, 1H), 7.17(t, J=8.00 Hz, 1H), 7.45-7.51(m, 1H), 7.57(d, J=8.40 Hz, 1H), 7.78(d, J=1.20 Hz, 1H), 8.03-8.07(m, 2H). MS (ESI, pos. ion) m/z 414[M+H]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 13273-53-5.

Reference:
Patent; BAIR, Kenneth W.; HERBERTZ, Torsten; KAUFFMAN, Goss Stryker; KAYSER-BRICKER, Katherine J.; LUKE, George P.; MARTIN, Matthew W.; MILLAN, David S.; SCHILLER, Shawn E. R.; TALBOT, Adam C.; WO2015/74064; (2015); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 61-82-5,Some common heterocyclic compound, 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of aldehyde (1.0 mmol), dimedone (1.0 mmol),1H-1,2,4-triazol-3-amine (1.0 mmol) and nano-AlPO4(SO3H) (0.1 g) was stirred in the acetonitrile (4.0 mL)at 50 C for an appropriate time. After the completion of thereaction as indicated by TLC, dichloromethane was addedto the solidified mixture and the insoluble catalyst was separatedby centrifugation. Evaporation of the solvent from thefiltrate and recrystallization of the solid residue from hot ethanolafforded the pure products in good to excellent yields

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-1,2,4-Triazol-5-amine, its application will become more common.

Reference:
Article; Sharghi, Hashem; Aboonajmi, Jasem; Aberi, Mahdi; Shiri, Pezhman; Journal of the Iranian Chemical Society; vol. 15; 5; (2018); p. 1107 – 1118;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-iodobenzoic acid (3.0 g, 12.09 mmol) in DMF was treated with (1.5 g, 21.7 mmol) 1,2,3-triazole, 7.08 g (21.7 mmol) CsCO3, 114 mg (0.60 mmol) CuI and 310 mg (2.17 mmol) trans-N,N’-dimethylcyclohexane-1,2-diamine. The mixture was heated at 120 C. for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with EtOAc, and filtered through Celite. The residue was purified by gradient elution on SiO2 (MeOH in DCM with 0.1% AcOH) to give the faster eluting desired 2-(2H-1,2,3-triazol-2-yl)benzoyl acid, A-1. Data for A-1: 1HNMR (500 MHz, DMSO-d6) delta 13.05 (br s, 1H), 8.12 (s, 2H), 7.81-7.52 (m, 4H) ppm. The undesired 2-(1H-1,2,3-triazol-2-yl)benzoic acid eluted second.

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bergman, Jeffrey M.; Breslin, Michael J.; Coleman, Paul J.; Cox, Christopher D.; Mercer, Swati P.; Roecker, Anthony J.; US2008/132490; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 584-13-4, A common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical procedure, 3-arylimino-1,2,4-triazoles and 4-arylimino-1,2,4-triazoles 1-25 were synthesized by mixing 3-amino-1,2,4-triazole or 4-amino-1,2,4-triazole (2 mmol), substituted benzaldehydes (2 mmol) and H2SO4 (2 mL) in ethanol (15 mL). The mixtures were refluxed for 4-10 h, while progress of the reaction was monitored through thin layer chromatography. When reaction was completed, solvent was evaporated on a rotary evaporator under reduced pressure and residue was washed with hot hexane. Resulting compounds were crystallized by ethanol to give title compounds in moderate to good yields.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Khan, Khalid Mohammed; Siddiqui, Salman; Saleem, Muhammad; Taha, Muhammad; Saad, Syed Muhammad; Perveen, Shahnaz; Choudhary, M. Iqbal; Bioorganic and Medicinal Chemistry; vol. 22; 22; (2014); p. 6509 – 6514;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7411-23-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) and p-quinonemethide precursor 7 (2.9 mmol) were refluxed for 4 h in DMF (10mL). Products were isolated analogously to compound 4a.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Dibromo-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, A new synthetic method of this compound is introduced below., Quality Control of 1H-[1,2,3]Triazole-4-carboxylic acid

[0618] 3H-1,2,3-triazole-5-carboxylic acid (1.1 mg, 10.0f.tmol) was combined with HATU (3.0 mg, 7.8 flillOI) in DMF(0.5 mL) and stirred for 10 minutes; DIPEA (1.0 eq.) wasadded and the mixture was stirred for 1 minute. Compound 2(4.9 mg, 11 f.tmol) was dissolved in DMF (1 mL) and DIPEA(5.8 f.LL, 33 mmol) was added, followed by addition of theactivate acid solution. The mixture was stirred for 30 minutesto yield Compound 3.

The synthetic route of 16681-70-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, A common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of methyl 6-methoxy-3-[(4-methyl-l-naphthoyl)amino]pyridine-2- carboxylate prepared in Example IE (1.8 g, 5.14 mmol) in CCl4 (100 ml) was added N- bromosuccinimide (0.96 g, 5.39 mmol) and benzoyl peroxide (0.125 g, 0.51 mmol). The reaction mixture was refluxed for 1.5 h under nitrogen. DMF (2.5 ml) and 1,2,3-triazole (2.98 ml, 51.4 mmol) was added, and the reaction mixture was refluxed overnight. After removal of solvents, the residue was suspended in cold water. The formed precipitate was collected, washed with water, air dried and purified by column chromatography on silica gel using first CH2Cl2 and then CH2Cl2MeOH (100:1) as eluent to give 1.55 g (72%) of methyl 6-methoxy-3 – { [4-(1H- 1 ,2,3-triazol- 1 -ylmethyl)-l naphthoyl] amino} pyridine-2- carboxylate. MS (ESI) (M+H)+ 418.13.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASTRAZENECA AB; WO2007/61360; (2007); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 27808-16-8,Some common heterocyclic compound, 27808-16-8, name is 4-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 22: 1- (2-Fluoro-4-nitro-phenyl)-4-methvl-1, 2, 31-triazole; A mixture of 4-methyl- [1, 2,3]-triazole (60 g, 0.72 mol), K2HP04 (250 g, 1.44 mol) and 3,4- difluoronitrobenzene (80 ml, 0.723 mol) in DMF (3.4 litres) was stirred at 85C under N2 for 2.5 days. After removal of DMF in vacuo, the residue was chromatographed on silica gel with 0-5% ethyl acetate in dichloromethane to give the title compound as a light yellow solid (38.3 g, 24%). The other two isomers were also isolated. 1H-NMR (CDCl3) No. _5 : 8 8.35 (m, 1H) ; 8.23 (m, 2H); 7.98 (dd, 1H); 2.48 (d, 3H)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Methyl-1H-1,2,3-triazole, its application will become more common.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2003/72575; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics