Category: Triazoles

Reference of 16681-65-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 16681-65-5 name is 1-Methyl-1H-1,2,3-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A solution of n-butyllithium in hexanes (2.5 M, 22.5 mL, 56.3 mmol) was added dropwise by syringe to a stirring solution of 1-methyl-1H-1,2,3-triazole (5.00 g, 60.2 mmol, prepared according to PCT Int. Appl., 2008098104) in dry tetrahydrofuran (400 mL) at -55 C. The resulting off-white slurry was stirred at -45 C. for 20 minutes, whereupon a solution of 2,6-dimethyl-pyridine-3-carbaldehyde (8.33 g, 61.7 mmol) in dry tetrahydrofuran (10 mL) was added dropwise by syringe. After 5 minutes, the cooling bath was removed and the reaction mixture was allowed to slowly warm. After 45 minutes, saturated aqueous ammonium chloride solution (10 mL) and ethyl acetate (100 mL) were added. The mixture was concentrated by rotary evaporation. The residue was dissolved in ethyl acetate (300 mL). The organic solution was washed with saturated aqueous sodium chloride solution (100 mL, containing excess solid sodium chloride). The aqueous layer was extracted with ethyl acetate (2*100 mL). The organic layers were combined and the combined solution was concentrated. Ether (100 mL) was added to the residue and the mixture was sonicated for 20 minutes during which time a white solid crashed out. The solids were collected by filtration. Ether (100 mL) was added to the collected solids and the mixture sonicated a second time. After 20 minutes, the mixture was filtered and the solids were collected to provide the title compound as a fine powder.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Methyl-1H-1,2,3-triazole, and friends who are interested can also refer to it.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 16681-70-2

I. (2S,4S)-5-Biphenyl-4-yl-2-hydroxymethyl-4-[(3H-[1,2,3]-triazole-4-carbonyl)-amino]-pentanoic acid 2-morpholin-4-yl-ethyl ester (R7=-O-(CH2)2-morpholine)(2S,4S)-5-Biphenyl-4-yl-4-t-butoxycarbonylamino-2-hydroxymethyl-pentanoic acid (100 mg, 250 mumol, 1.0 eq.), HOBt (0.2 g, 1.5 mmol, 6.0 eq.), and EDCI (260 muL, 6.0 eq.) were dissolved in DCM (2 mL). After stirring for 10 minutes, 4-morpholineethanol (330 mg, 2.5 mmol) was added. The mixture was stirred at room temperature until the reaction was complete (3 hours). The mixture was then diluted with DCM and washed with saturated aqueous NaHCO3. The organic layer was separated, dried, and concentrated. MeCN (2.5 mL) and 4 M of HCl in dioxane (250 muL) were added and the resulting mixture was stirred at room temperature for 1 hour. The solvent was removed to provide the intermediate HCl salt, which was used in the following coupling step. 1,2,3-Triazole-4-carboxylic acid (28.3 mg, 250 mumol, 1.0 eq.) and HATU (95 mg, 250 mumol, 1.0 eq.) were dissolved in DMF (2.0 mL) and the resulting solution was stirred for 5 minutes, followed by the addition of DIPEA (87.2 muL) and the intermediate HCl salt. After 5 minutes, the mixture was diluted with EtOAc then washed with saturated aqueous NaHCO3. The organic layer was separated, concentrated and purified by preparative HPLC to yield the title compound (60 mg; purity 95%). MS m/z [M+H]+ calc’d for C27H33N5O5, 508.25. found 508.4.

The synthetic route of 1H-[1,2,3]Triazole-4-carboxylic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THERAVANCE, INC.; US2012/213806; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-36-8, name is 1H-1,2,3-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 288-36-8

A solution of 1,2,3-triazole (430 mg, 6.23 mmol), 2-chloro-3-nitrothiophene (1.02 g, 6.23 mmol) and potassium t-butoxide (838 mg, 7.48mmol) in DMF (20 mL) was stirred at 90 0C for 4 h, after which the reaction mixture was cooled to room temperature and diluted with Et2O. The solution was washed with brine and the organic phase was separated, dried (Na2SO4), filtered, concentrated under vacuum and purified by silica gel column chromatography (eluant hexane/ethyl acetate, 8/2 to 1/1) to give a 1 :1 mixture of 2-(3-nitrothiophen-2-yl)-2H- 1,2,3-triazole and l-(3-nitrothiophen-2-yl)-lH-l,2,3-triazole (1.08 g, 5.55 mol, 89%). Retention time (min) = 1.256 and 1.701, method [1], MS(ESI) 197.0 (M+Eta).The nitrothiophene and 10% palladium on carbon in ethyl acetate (e.g., 3 mL) was shaken under a hydrogen atmosphere (e.g., 40 psi) for about 2 h. The resulting suspension was filtered through a pad of diatomaceous earth and the filtrate was concentrated under vacuum.The title compound was prepared from 2-(3-nitrothiophen-2-yl)-2H- 1,2,3- triazole and l-(3-nitrothiophen-2-yl)-lH-l,2,3-triazole (514 mg, 2.61 mmol) according to protocol F to give a 1/1 mixture of 2-(2H-l,2,3-triazol-2-yl)thiophen-3-amine and 1-(1H-1,2,3- triazol-2-yl)thiophen-3 -amine (431 mg, 2.61 mmol, quantitative). Retention time (min) = 0.581 and 1.035, method [1], MS(ESI) 167.0 (M+Eta).

The synthetic route of 288-36-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ELAN PHARMACEUTICALS, INC.; SHAM, Hing, L.; KONRADI, Andrei, W.; HOM, Roy, K.; PROBST, Gary, D.; BOWERS, Simeon; TRUONG, Anh; NEITZ, R., Jeffrey; SEALY, Jennifer; TOTH, Gergely; WO2010/91310; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1 ,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dirnethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to rt, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 50% EtOAc in water with 0.1% TFA) to give the desired A-3. A portion of this acid (0.1 1 g, 0.53 mmol) was treated with thionyl chloride (0.59 g, 5.3 mmol) in dichloromethane (5.0 mL) at rt. After stirring at RT for 1 h, the mixture was concentrated, azeotroping with benzene to yield acid chloride A-3.

The synthetic route of 1H-1,2,3-Triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2009/11775; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, A new synthetic method of this compound is introduced below., Formula: C2H2N3Na

(2) Production Example 2-2 (0100) 3.24 mmol of compound 4-a was dissolved in 3.2 mL of dimethylacetamide, and heated to 85 C. 4.85 mmol of a sodium salt of 1,2,4-triazole and 4.53 mmol of TMSOB were added to the obtained solution. Next, 1.64 mmol of a 28% methanol solution of sodium methoxide was added intermittently over a period of 50 minutes, after which a reaction was allowed to progress for 50 minutes. Following completion of the reaction, azole derivative 6-a was obtained using the same method as that used in Production Example 2-1 above. The purity was 99.1%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Kureha Corporation; Masano, Taiga; Sudo, Keiichi; US2015/218134; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 584-13-4,Some common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4H-1,2,4-Triazol-4-amine, its application will become more common.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 584-13-4, name is 4H-1,2,4-Triazol-4-amine, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 584-13-4

General procedure: 4-Amino-1,2,4-triazole (0.005 mol) was taken in 150 mL beaker and dissolved in ethanol (10 mL). Equimolar amount of substituted benzaldehyde was added to the ethanolic solution. Then, 0.5 mL of glacial acetic acid was added dropwise to the reaction mixture and stirred with glass rod. The contents were irradiated in MW at 360W for required time with continuous monitoring by TLC. Then the reaction mixture was filtered. Crude product was recrystallized from ethanol to obtain pure compound. Same procedure was repeated but with different amount of catalysts, i.e., 0.75 mL and 1 mL. The progress of reaction was monitored by TLC after 10 s interval. On completion of reaction, resultant mass was filtered and recrystallized from ethanol. The same procedure was used for the synthesis of rest of the compounds.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 584-13-4.

Reference:
Article; Mhaske, Sadhana D.; Takate, Sushama J.; Dhawale, Rhushikesh N.; Akolkar, Hemantkumar N.; Randhavane, Pratibha V.; Karale, Bhausaheb K.; Indian Journal of Heterocyclic Chemistry; vol. 27; 1; (2017); p. 89 – 97;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

584-13-4, name is 4H-1,2,4-Triazol-4-amine, belongs to Triazoles compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C2H4N4

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

The synthetic route of 584-13-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, These common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of (E)-3-(4-chloro-2-((5-methyl-2 H-tetrazol-2-yl)methyl)phenyl)- 1 -(4-(pi peridi n-4- yl)piperazin-i-yl)prop-2-en-i-one, dihydrochloride salt (Example 149, step 2)(130 mg, 0.259 mmol), DIPEA (0.316 ml, 1.810 mmol) and 1H-i ,2,3-triazole-4-carboxylic acid (38.0 mg, 0.336 mmol) in DMF (1.5 ml) was added T3P, 50% solution in EtOAc (0.302 ml, 0.517mmol). The resultant mixture was stirred at room temperature over the weekend. Water (0.5 ml) was added and the solvent removed in vacuo. The residue was purified by reverse phase preparative HPLC to afford the title compound as the trifluoroacetate salt;LC-MS: Rt 0.87 mins; MS mlz 525.3 (M+H)+; Method 2minLowpHvo2

Statistics shows that 1H-[1,2,3]Triazole-4-carboxylic acid is playing an increasingly important role. we look forward to future research findings about 16681-70-2.

Reference:
Patent; NOVARTIS AG; BEATTIE, David; BAETTIG, Urs; LEGRAND, Darren Mark; LISTER, Andrew Stuart; MCKENNA, Jeffrey; PEARCE, David William; SANDHAM, David Andrew; STEWARD, Oliver Ross; THOMSON, Christopher; WO2015/8230; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, A new synthetic method of this compound is introduced below., Recommanded Product: 41253-21-8

Example 121; 4-[[2-(1 H-Lambda ,2,4-TriazoM -yl)ethyl](2,2,2-trif luoroethyl)amino]-2- (trifluoromethyl)benzonitrile; A mixture of 2-[[4-cyano-3-(trifluoromethyl)phenyl](2,2,2-trifluoroethyl)amino]ethyl methanesulfonate, Example 15C (0.050 g, 0.128 mmol) and 1 ,2,4-triazole sodium salt (0.023 g, 0.256 mmol) in DMF (2 ml_) was heated at 6O0C under N2 for 45 min. Upon cooling, the mixture was partitioned between Et2O and water. The organic phase was washed with water and the combined aqueous phases were extracted twice with Et2O. The combined organic phases were washed with brine, dried (Na2SO4), and concentrated in vacuo. The residue was purified by silica gel chromatography (5-80% EtOAc/hexanes gradient followed by 1-10% MeOH/EtOAc gradient) and the product was crystallized from CH2CI2/hexanes to give the title compound as a white solid (0.038 mg, 83% yield): MS (ES) m/z 364 (M+1 ).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2006/44707; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics