Category: Triazoles

Reference of 7343-34-2,Some common heterocyclic compound, 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, molecular formula is C4H7N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under an atmosphere of argon, (2S,4R)-N-(1-cyanocyclopropyl)-4-(4-fluorophenylsulfonyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 33, step b, 0.1 g, 211 imol) was combined with N,Ndimethylacetamide (2.00 mL) to give a colorless suspension. 3,5-Dimethyl-1H-1,2,4- triazole (41.0 mg, 422 imol) and cesium carbonate (138 mg, 422 imol) were added.The reaction mixture was stirred over the weekend at ambient temperature. The crude materialwas purified by preparative HPLC (Zorbax Eclipse XDB-C18; 21,2x50mm; flow: 25 mL/min; gradient: acetonitrile / water (+0.1percent formic acid) = (95percent-5percent to 5percent-95percent) in 6 mm; collected by 254 nm detector) to yield the title compound as a colorless viscous oil (13.2 mg, 11.4 percent). mlz = 551.17 [M+H41.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3,5-Dimethyl-4H-1,2,4-triazole, its application will become more common.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 956317-36-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride(WSCHCl) (37.4 g, 0.20 mol) was added to a solution of Nethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanaminedihydrochloride (50 g, 0.16 mol), 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (33.9 g, 0.18 mol), 1-hydroxy-1H-benzotriazolehydrate (HOBtH2O) (26.4 g, 0.20 mol) and triethylamine (TEA)(39.5 g, 0.39 mol) in THF (500 mL) at 0 C, followed by stirring atroom temperature for 20.5 h. The solvent of the reaction solutionwas distilled off under reduced pressure. An aqueous NaHCO3 solutionand EtOAc were added to the resulting residue, followed byextraction with EtOAc. The organic layer was washed with water,and the solvent was distilled off under reduced pressure to yieldthe crude product (72 g). An additional 196.7 g of the crude productwas synthesized using the same method from N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-1-yl] ethanamine dihydrochloride(140 g, 0.46 mol) and 5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoicacid (94.8 g, 0.50 mol). The obtained crude product (268.7 g) wasrecrystallized with heptane and EtOAc. The deposited solid wasthen collected by filtration. The obtained solid was dried by heatingunder reduced pressure to yield the title compound 27e as acolorless powder (217.3 g).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 61-82-5, The chemical industry reduces the impact on the environment during synthesis 61-82-5, name is 1H-1,2,4-Triazol-5-amine, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of aromaticaldehyde (1.0 mmol) and dimedone(1.0 mmol) with 2-aminobenzimidazole or 3-amino-1,2,4-triazole (1.0 mmol) was stirred in acetic acid (5 mL) at 60 Cfor the appropriate time (Tables 3, 4). The progress of thereaction was monitored by TLC. After completion of thereaction, a thick precipitate was obtained. The solid productwas filtered off and washed with acetic acid (3 ¡Á 2 mL) togive the pure products 4 and 6, and subsequently dried in air.The pure products were characterized by conventional spectroscopicmethods. Physical and spectral data for the compounds,4b, 4c, 4h, 4j, 6a, 6c, and 6h are represented below:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazol-5-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Mousavi, Mir Rasul; Maghsoodlou, Malek Taher; Hazeri, Nourallah; Habibi-Khorassani, Sayyed Mostafa; Journal of the Iranian Chemical Society; vol. 12; 8; (2015); p. 1419 – 1424;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4923-01-7, name is 5-Methyl-4H-1,2,4-triazol-3-amine, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4923-01-7, Application In Synthesis of 5-Methyl-4H-1,2,4-triazol-3-amine

2-(2,3-Dihydrobenzofuran-5-yl)-N-(3-methyl-1H-1,2,4-triazol-5-yl)thiazole-4- To a mixture of 2-(2,3-dihydro-l-benzoruran-5~yl)-l,3-thiazole-4-carboxylic acid (126 mg, 0.51 mmol), lH-l ,2,4-triazol-5-amine (50 mg, 0.51 mmol) and 2-(lH-benzotriazole-l-yl)- 1 ,1 ,3,3-tetramethyluroniurn hexafluorophosphate (HBTU) (120 mg, 0.32 mmol) under stirring and heating at 1 10 C 2 ml of dry pyridine were added. The mixture was heated at 110 C for 5 h, pyridine was evaporated, and the residue was diluted with an aqueous Na2C03 solution. The resulting precipitate was filtered off, dissolved in hot NN-dimethylformamide, settled by addition of EtOAc and hexane, filtered off and dried. The product was obtained as a light yellow solid (82 mg, 0.25 mmol, 49 % yield). NMR (400 MHz, OMSO-d6, CC14) delta ppm 2.29 (3 H, bs, CH3), 3.30 (2 H, t, CH2CH20), 4.64 (2 H, t, OCH2), 6.80 (1 H, d, CH-arom.), 7.82 (1 H, d, CH-arom.), 8.00 (1 H, s, CH-arom.), 8.31 (1 H, bs, CH-thiazol), 1 1.20 (1 H, bs, NH), 12.95 (1 H, bs, NH). LC/MS [M+H]+: 328.0

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Methyl-4H-1,2,4-triazol-3-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; 4SC DISCOVERY GMBH; LEBAN, Johann; ZAJA, Mirko; WO2014/202638; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 61-82-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

The synthetic route of 1H-1,2,4-Triazol-5-amine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7411-23-6, These common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1:To a suspension of NaH (60% in mineral oil, 194.0 mg, 4.8 mmol) in THF (20 mL) at 000 is added a solution of triazole A6a (1 .0 g, 4.4 mmol, Matrix) in THF (20 mL). The reaction mixture is allowed to warm to RT and is stirred for 30 mm. It is then cooled again to 0C and allyl bromide A9a (762.9 iL, 8.8 mmol, Aldrich) is added. The reaction mixture is stirred overnight at RT and diluted with EtOAc (50 mL). The organic layer is washed with water (25 mL) and brine (25 mL), dried over Mg504, and filtered. The filtrate is concentrated to give A9b which is used as is in subsequent steps.

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; FADER, Lee; BILODEAU, Francois; POIRIER, Maude; PARISIEN, Mathieu; KUHN, Cyrille; THIBEAULT, Carl; TRINH, Thao; WO2014/70978; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 956317-36-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 956317-36-5 name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of compound 6 (2.40 g, 11.76 mmol), compound 5 (2.86 g, 14.11 mmol), 1-hydroxy-1H-benzotriazole (1.90 g, 14.11 mmol), and dry triethylamine (3.56 g, 35.28 mmol) in 18 mL of dry DMF was added EDC hydrochloride (2.70 g, 14.11 mmol), and the reaction was stirred 2 h at room temperature. The reaction was partitioned between EtOAc and saturated aqueous NaHCO3, the layers were separated and the organic was added to aqueous citric acid stirring for 1 h. Water was added and the mixture was partitioned. Combined the water layers and added saturated aqueous Na2CO3 to regulate pH > 9, then extracted with three portions of EtOAc. The organic layers were combined, dried over MgSO4 and concentrated by rotary evaporation to provide compound 7 as a white power 4.30 g in 93% yield. Mp: 108-109 C, [alpha]D25 -58.4 (c 1.01, MeOH). 1H NMR (600 MHz, DMSO-d6): delta 8.00-7.76 (m, 3H), 7.37-7.17 (m, 7H), 4.40-4.09 (m, 1H), 3.63-3.48 (m, 2H), 3.44-3.02 (m, 3H), 2.82-2.75 (m, 1H), 2.63-2.47 (m, 1H), 2.63-2.14 (m, 5H), 2.02- 1.63 (m, 2H), 1.17-0.99 (m, 3H); MS (ESI) m/z: 390.30 [M+H]+. HR-MS(ESI): m/z [M+H] calcd. for C23H27N5O: 390.2288; found: 390.2281.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, and friends who are interested can also refer to it.

Reference:
Article; Chen, Yin; Zhou, Yan; Li, Jun-Hong; Sun, Jia-Quan; Zhang, Gui-Sen; Chinese Chemical Letters; vol. 26; 1; (2015); p. 103 – 107;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 28938-17-2, name is 4,5-Dibromo-2-methyl-2H-1,2,3-triazole, molecular formula is C3H3Br2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

4-bromo-2-methyl-2H-l,2,3-triazole. n-Butyllithium (8.3 mL) was added dropwise to a solution of 4,5-dibromo-2-methyl-2H-l,2,3-triazole (2.0 g, 8.37 mmol) in tetrahydrofuran (50 mL) under -78C, Once addition was completed, the mixture was stirred for another 30 minutes at -78C. The reaction was quenched with water, extracted with ethyl acetate (50 mL x 3), washed by brine (30 mL x 3). The organic phase was dried over anhydrous sodium sulfate and then filtered. The filtrate was concentrated in vacuo to afford 4-bromo-2-methyl-2H- 1,2,3- triazole.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 28938-17-2, its application will become more common.

Reference:
Patent; CONSTELLATION PHARMACEUTICALS, INC.; ALBRECHT, Brian, K.; GEHLING, Victor, S.; HEWITT, Michael, C.; TAYLOR, Alexander, M.; HARMANGE, Jean-Christophe; WO2012/151512; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1257633-67-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1257633-67-2 as follows.

Synthesis of 1-tert-butyl-1H-1,2,3-triazole-4-carbaldehyde To a 50-mL round bottom flask was added a solution of 1-tert-butyl-4-(diethoxymethyl)-1H-1,2,3-triazole (1.28 g, 5.63 mmol) in dichloromethane (6.0 mL), followed by addition of water (3.0 mL) and trifluoroacetic acid (1.0 mL). The reaction was stirred vigorously under nitrogen for 3 h until TLC analysis indicated the complete disappearance of the starting material (10% EtOAc in dichloromethane, starting material Rf 0.5, product Rf 0.6, KMnO4 stain). The reaction mixture was diluted with EtOAc (100 mL), washed with sat aq NaHCO3 (3*40 mL) and brine (40 mL). The combined organic phases were dried over anhydrous MgSO4, filtered, and concd in vacuo to provide 0.71 g of a light yellow oil (yield: 82%). The crude product was used without purification.

According to the analysis of related databases, 1257633-67-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Albert Einstein College of Medicine of Yeshiva Uni; Wu, Peng; Soriano del Amo, David; Wang, Wei; Marlow, Florence L.; US2013/295019; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-88-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-88-0, name is 1H-1,2,4-Triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 1,2,4-triazole (4.06 g, 58.7 mmol), potassium carbonate (9.05 g, 65.5 mmol), 4-fluorobenzaldehyde (6.3 ml, 58.7 mmol), and copper(I) oxide (0.26 g, 1.82 mmol) in pyridine (30 ml) is heated under nitrogen atmosphere at reflux overnight. After pyridine is distilled, the residue is diluted with chloroform, filtered, and washed with chloroform. The combined filtrate is washed with water, dried over magnesium sulfate, and concentrated in vacuo. The crude material is purified by column chromatography on silica with hexane/ethyl acetate (1:2) to give 4-(1,2,4-triazol-1-yl)-benzaldehyde and with ethyl acetate/methanol (19:1) to give 4-(1,3,4-triazol-1-yl)-benzaldehyde.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-1,2,4-Triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Novartis AG; US5977075; (1999); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics