Category: Triazoles

These common heterocyclic compound, 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 3,5-Dimethyl-4H-1,2,4-triazole

To a stirred solution of Compound 1g in ACN (100 ml) were added Cs2CO3 (125.6 g, 386.15 mmol) and ethyl 2-bromopropanoate (39.43 ml, 283.15 mmol) at 25¡ã C. The mixture was stirred for 16 h at room temperature, The progress of the reaction was monitored by TLC (5percent MeOH in DCM, Rf=0.5, PMA active). After completion of the reaction, the reaction mixture was filtered and washed with EtOAc (300 ml). The filtrate was washed with water (2¡Á200 ml), brine (2¡Á200 ml). The organic layer was dried over anhydrous sodium sulfate and concentrated to obtain 35 g crude product. The crude product was purified by normal phase column chromatography using silica (100-200 mesh), eluting with 2percent MeOH in DCM. The collected fractions were evaporated to obtain Compound 2g (30 g, 59.17percent) as a pale yellow liquid. The desired isomer was confirmed by NOE analysis. 1H NMR (400 MHz, DMSO-d6) delta ppm: 5.22-5.34 (m, 1H), 4.03-4.18 (m, 2H), 2.32 (s, 3H), 2.16 (s, 3H), 1.60 (d, J=7.23 Hz, 3H), 1.06-1.19 (m, 3H); LCMS: 75.07percent (198.17, M+H), RT=1.18 min.

The synthetic route of 3,5-Dimethyl-4H-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; pH Pharma Co., Ltd.; Jammalamadaka, Vasu; Tipton, Kimberly Ann; Satyal, Sanjeev; Huh, Hoyoung; (69 pag.)US2019/84996; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 7343-33-1, These common heterocyclic compound, 7343-33-1, name is 5-Bromo-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-bromo-1H-1,2,4-triazole (32.1 mg, 0.217 mmol) and BF3OEt2 (54 mul, 0.426 mmol) were added to a stirred solution of Intermediate 6 (26.0 mg, 0.043 mmol) in 1,2- dichloroethane (0.43 ml). The reaction mixture was a light yellow solution that was heated to 50¡ãC. After 1.75 hr, LCMS and 1H NMR showed complete consumption of Intermediate 6. The reaction mixture was cooled to room temperature, the solvent was evaporated, and the resulting residue was placed under high vacuum. The residue was dissolved in methanol and separated using a single HPLC run on a 19 x 150 mm Sunfire Prep C18 OBD 10 mum column by eluting with acetonitrile/water + 0.1percent TFA. The HPLC fractions containing the fastest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6A (3.6 mg) as a white solid. The HPLC fractions containing the second eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6B (13.1 mg) as a white solid. The HPLC fractions containing the slowest eluting regioisomer were combined, the solvent was evaporated under reduced pressure, and the residue was lyophilized from ethanol and benzene to give EXAMPLE 6C (5.8 mg) as a white solid.EXAMPLE 6A:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.76 (d, 3H, Me), 0.81 (d, 3H, Me), 0.84 (d, 3H, Me), 0.85 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.94 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.35 (m), 1.40-1.44 (m), 1.46-1.65 (m), 1.73-1.96 (m), 2.11-2.22 (m), 2.43 (broad dd, 1H, H13), 2.79 (broad d, 1H), 2.84 (s, 1H, H7), 3.49 (d, 1H), 3.53 (d, 2H), 3.60 (d, 1H), 3.73 (broad d, 1H), 3.94 (d, 1H), 5.50 (dd, 1H, H5), 5.72-5.80 (broad m, 1H, H14), 9.29 (broad s, 1H, triazole). Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6B:1H NMR (CD3OD, 600 MHz, ppm) delta 0.75 (s, 3H, Me), 0.76 (d, 3H, Me), 0.79 (d, 3H, Me), 0.83 (d, 3H, Me), 0.84 (d, 3H, Me), 0.88 (s, 3H, Me), 0.89 (d, 3H, Me), 0.91 (s, 3H, Me), 1.13 (s, 3H, Me), 1.19 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.43 (m), 1.46-1.56 (m), 1.58-1.64 (m), 1.72-1.95 (m), 2.09-2.21 (m), 2.30 (dd, 1H, H13), 2.83 (s, 1H, H7), 2.85 (d, 1H), 3.48 (d, 1H), 3.48 (d, 1H), 3.54 (dd, 1H), 3.60 (d, 1H), 3.88 (d, 1H), 3.95 (d, 1H), 5.47 (dd, 1H, H5), 5.71-5.77 (m, 1H, H14), 8.10 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).EXAMPLE 6C:1H NMR (CD3OD, 600 MHz, ppm) delta 0.76 (s, 3H, Me), 0.77 (d, 3H, Me), 0.82 (d, 3H, Me), 0.85 (d, 3H, Me), 0.86 (s, 3H, Me), 0.86 (d, 3H, Me), 0.89 (d, 3H, Me), 0.92 (s, 3H, Me), 1.16 (s, 3H, Me), 1.20 (s, 3H, Me), 1.22-1.34 (m), 1.39-1.44 (m), 1.48-1.65 (m), 1.76-1.96 (m), 2.11-2.22 (m), 2.41 (dd, 1H, H13), 2.72 (d, 1H), 2.84 (s, 1H, H7), 3.47 (d, 1H), 3.50 (d, 1H), 3.52 (dd, 1H), 3.58 (d, 1H), 3.72 (d, 1H), 3.91 (d, 1H), 5.48 (dd, 1H, H5), 5.51-5.57 (m, 1H, H 14), 8.52 (s, 1H, triazole).Mass Spectrum: (ESI) m/z = 717.32 (719.32) (M+H).

Statistics shows that 5-Bromo-1H-1,2,4-triazole is playing an increasingly important role. we look forward to future research findings about 7343-33-1.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SCYNEXIS, INC.; GREENLEE, Mark, L.; WILKENING, Robert; APGAR, James; SPERBECK, Donald; WILDONGER, Kenneth, James; MENG, Dongfang; PARKER, Dann, L.; PACOFSKY, Gregory, James; HEASLEY, Brian, Haid; MAMAI, Ahmed; NELSON, Kingsley; WO2010/19204; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 20725-34-2, name is 1-(4-Bromophenyl)-5-methyl-1H-1,2,3-triazole-4-carboxylic acid, belongs to Triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 20725-34-2, Product Details of 20725-34-2

In a 20 mL reaction vial, l-(4-bromo-phenyl)-5-methyl-lH-[l ,2,3]triazole-4-carboxylic acid (0.67 g, 2.38 mmol), (R)-l-phenylethanol (0.29 g, 0.29 mL, 2.4 mmol) and triethylamine (0.24 g, 0.33 mL, 2.4 mmol) were combined with toluene (100 mL) to give a yellow solution and to this was added diphenylphosphorylazide (0.65 g, 0.5 mL, 2.4 mmol). The vial’s atmosphere was purged with nitrogren, sealed, heated in a dry block at 80 C for 4 h, and cooled to room temperature overnight. The reaction was diluted with EtOAc (100 mL) and washed with water (100 mL) and brine (50 mL). The aqueous layers were extracted with EtOAc (100 mL). The organic layers were combined, dried over MgS04, filtered, concentrated, dissolved in minimal DCM, and purified by flash chromatography (silica gel, 0% to 25% EtOAc in hexanes). Appropriate fractions combined, concentrated, dried from DCM / hexanes, to give [l-(4-bromo-phenyl)-5-methyl-lH-[l ,2,3]triazol-4-yl]-carbamic acid (R)-l-phenyl-ethyl ester (0.507 g, 53.2% yield) as an off-white solid. LC/MS calcd. for Ci8Hi7BrN402 (m/e) 400/402, obsd. 401/403 (M+H, ES+).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-(4-Bromophenyl)-5-methyl-1H-1,2,3-triazole-4-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; GABRIEL, Stephen Deems; HAMILTON, Matthew Michael; QIAN, Yimin; SIDDURI, Achyutharao; WO2013/189865; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 16681-65-5 name is 1-Methyl-1H-1,2,3-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The title compound was prepared according to the patent application WO2008/135826. To a 50 mL 2-necked flask containing 1-methyl-1H-1,2,3-triazole (1.0 g, 12.0 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (45 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 4.8 mL, 12.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -30 to -20 C. for 45 minutes, then neat DMF (3 mL, 38.5 mmol) was introduced at -10 C. The mixture was allowed to warm up to room temperature and stirred for 60 minutes, followed by pouring into water. The aqueous portion was extracted with EtOAc (4*50 mL) and the combined organics were washed with brine, dried over MgSO4, filtered and concentrated. The aqueous portion was back-extracted with DCM (3*50 mL) and dried as above. The combined organics were concentrated to give a light brown oil that was much more UV active than the starting material. TLC in either 25% CH3CN-DCM or 25% EtOAc-DCM showed the product to have a slightly higher Rf than the starting material. Chromatography on silica gel (100% DCM increasing to 25% CH3CN-DCM) provided the title compound as a colorless oil.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Methyl-1H-1,2,3-triazole, and friends who are interested can also refer to it.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; US2015/105372; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

Step 1:A solution of triazole A6a (5.0 g, 22.0 mmol, Matrix) in DMF (100 mL) at RT is treated with potassium carbonate (7.6 g, 55.1 mmol) and potassium iodide (365.9 mg, 2.2 mmol) before the addition of benzyl 3-bromopropyl ether A8a (4.3 mL, 24.2 mmol, Aldrich). The resulting mixture is heated to 75C overnight, allowed to cool to RT, and then EtOAc (400 ml) is added. The organic layer is washed with brine, water then again with brine and dried over Mg504. Solvent evaporation affords the crude product that is purified using the CombiFlash (20% EtOAc/hexanes) to afford A8b.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Dibromo-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; FADER, Lee; BILODEAU, Francois; POIRIER, Maude; PARISIEN, Mathieu; KUHN, Cyrille; THIBEAULT, Carl; TRINH, Thao; WO2014/70978; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 13273-53-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 13273-53-5 as follows.

General procedure: To a 50 mL round bottle flask was added 1,1?-Bis(diphenylphosphino)ferrocenedichloro Palladium(II) (0.1equiv), bromide (1.0equiv) and vinylboronic acid pinacol ester (2.0equiv) in 20mL dioxane. The mixture was degassed for 5min, and sodium carbonate aqueous solution (2.0M, 10equiv) was added. The mixture was then heated to 85C for 14h. After cooled to rt, the reaction mixture was filtered through a short Celite pad and washed with EtOAc. The organic solution was concentrated under reduced pressure and the residue was loaded into combi flush for purification to afford the product as oil.

According to the analysis of related databases, 13273-53-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Lian, Yajing; Burford, Kristen; Londregan, Allyn T.; Tetrahedron; vol. 71; 50; (2015); p. 9509 – 9514;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 61-82-5, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 61-82-5 as follows.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

According to the analysis of related databases, 61-82-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1455-77-2 as follows. HPLC of Formula: C2H5N5

A mixture of Zn(NO3)26H2O (0.030 g, 0.1 mmol), H3bpt (0.025 g,0.1 mmol), Hdatrz (0.01 g, 0.1 mmol), DMF (3 mL) and CH3OH(1 mL) was placed in a small vial at 90 C for 72 h and then cooledto room temperature slowly. Colorless block crystals were obtainedin 42percent yield based on Zn(NO3)26H2O. Anal. calcd. forC36H29N11O12Zn3 (1004.88): C, 42.99; H, 2.89; N, 15.33percent. Found: C,42.89; H, 2.85; N, 15.42percent. IR (cm1): 3422(w), 1712(m), 1675(s),1587(m), 1509(m), 1389(m), 1378(m), 1109(w), 1025(w), 958(m),893(m), 826(m), 778(w), 690(w), 674(w), 589(w), 562(w).

According to the analysis of related databases, 1455-77-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhao, Haixiang; Dong, Yanli; Liu, Haiping; Journal of Molecular Structure; vol. 1105; (2016); p. 112 – 117;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7170-01-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to Triazoles compound, it is a common compound, a new synthetic route is introduced below.

2- [6-Chloro-3- (ethanesulfonyl) pyridin-2-yl] -3-methyl-6 – [(trifluoromethyl) sulfanyl]-3H-imidazo [4,5-b] pyridine 200 mg, 60% sodium hydride (oily) 30 mg, and a mixture of 2 mL of DMF, was added under ice-cooling 3-methyl-1H-1,2,4-triazole 47 mg. After the mixture was stirred under ice-cooling for 2.5 hours, a saturated aqueous solution layer was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The organic layer was washed with water, and saturated brine, and dried with anhydrous sodium sulfate. The resulting organic layer was dried under reduced pressure. The resulting residue was subjected to silica gel chromatography, the compounds of the present invention beta36 referred to below was obtained 120mg.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methyl-1H-1,2,4-triazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; NAKAJIMA, YUJI; OKAWARA, YUICHI; (263 pag.)JP2016/102104; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 6818-99-1, A common heterocyclic compound, 6818-99-1, name is 3-Chloro-1,2,4-triazole, molecular formula is C2H2ClN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 1 1-(4-Chlorobenzoyl)-1-(3-chloro-1,2,4-triazol-1-yl)-cyclopropane STR15 34 g (246 mmol) of potassium carbonate and 35 g (338 mmol) of 3-chloro-1,2,4-triazole are initially introduced into 130 ml of acetone under reflux and 50 g (169 mol) of 2-bromo-4-chloro-1-(4-chlorophenyl)-butan-1-one in 60 ml of acetone are added dropwise. The mixture is boiled under reflux for 8 hours, the solution is filtered off with suction from the residue and the solvent is stripped off in vacuo. The residue is taken up in ethyl acetate, washed with water and dried over sodium sulphate, and the solvent is evaporated. Chromatography on silica gel (eluent: dichloromethane) gives 42.9 g of the title compound (90% of theory) of m.p. 85 C.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bayer Aktiengesellschaft; US5126359; (1992); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics