Category: Triazoles

Reference of 1001401-62-2, The chemical industry reduces the impact on the environment during synthesis 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, I believe this compound will play a more active role in future production and life.

General procedure: TBTU (1.1 mmol) was added to a solution of the required carboxylic acid A-1 (1.0 mmol) and DIPEA (2.0 mmol) in DMF (2.0 mL). After stirring at rt for 10 min a solution of the required amine B-3 (1 .0 mmol) in DMF (1.0 mL) was added. The resulting rxn mixture was stirred at rt for up to 3 d before being purified directly by prep. HPLC (method G) to furnish the desired product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOLLI, Martin; BOSS, Christoph; BROTSCHI, Christine; GUDE, Markus; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2014/57435; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Sodium 1,2,4-triazol-1-ide

Production Example 3Synthesis of 5-(4-chlorobenzyl)-2-meth- oxymethoxymethyl-2-methyl- 1 -(1H- 1 ,2,4-triazole- 1-ylmethyl)cyclopentanol (Compound (4)): 10182] 1H-i,2,4-triazolesodium salt (13.1 mmol) was dissolved in NMP (7 ml), and then heated to an internal temperature of 115 C. To this, Compound (6) (8.76 mmol) was added, and the mixture was thoroughly washed with NMP (1.8 ml). After the internal temperature was returned to 115 C., sodium t-butoxide (5.26 mmol) and trimethyl sulfoxonium bromide (1.476 mmol) were gradually added to the mixture over a period of 3 hours. After the addition, the resulting mixture was stirred at a temperature of 115 C. for 75 minutes. After the reaction solution was cooled down to35 C., water was added to the reaction solution, and then extraction with ethyl acetate was performed. An organic layer of the extract was washed with water and saturated brine, and then dried with anhydrous sodium sulfate. The solvent was distilled off, followed by purification of the residue by silica gel column chromatography, and thus Compound (4), which was a mixture of isomers, was obtained.10183] Yield: 71%

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41253-21-8, its application will become more common.

Reference:
Patent; KUREHA CORPORATION; Miyake, Taiji; Araki, Nobuyuki; Yamazaki, Toru; US2014/94362; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows., category: Triazoles

4,5-dibromo-2-methyl-2H-l,2,3-triazole. Iodomethane (19.0 g, 133.8 mmol) was added to a solution of 4,5-dibromo-2H-l,2,3-triazole (15.0 g, 66.7 mmol) and potassium carbonate (18.1 g, 131.2 mmol) in N,N-dimethylformamide (100 mL) at -10C. The mixture was warmed to room temperature and stirred for 12 hours. The reaction mixture was concentrated to give a residue. The residue was dissolved in ethyl acetate (200 mL), washed by brine (50 mL x 3), dried over anhydrous sodium sulfate and then filtered. The filtrate was concentrated and the residue was purified by column chramtography (silica gel, dichloromethane/methanol = 15 : 1) to afford 4,5-dibromo-2-methyl-2H-l,2,3-triazole as a white solid (5.9, 36.9 %).

According to the analysis of related databases, 22300-52-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CONSTELLATION PHARMACEUTICALS, INC.; ALBRECHT, Brian, K.; GEHLING, Victor, S.; HEWITT, Michael, C.; TAYLOR, Alexander, M.; HARMANGE, Jean-Christophe; WO2012/151512; (2012); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

General procedure: Dimedone (0.14 g, 1 mmol), benzaldehyde (0.1 g, 1 mmol), and 4-phenylurazole (0.177 g, 1 mmol) were mixed with PEG-SO3H (0.6 g, 0.1 mmol) and the obtained mixture was stirred magnetically at 80 C for 40 min. After the completion of the reaction warm water (20 mL) was added and the mixture stirred for about 5 min. The insoluble crude product was filtered and recrystallized from EtOH/H2O 4:1 and the pure product was obtained (0.352 g, 91%). In order to recover the catalyst, the filtrate was dried under reduced pressure and recovered catalyst was washed with diethyl ether and reused after drying under reduced pressure. The equivalent procedure was used for the synthesis of triazolo[1,2-a]indazole-tetraones.

The synthetic route of 4-Phenyl-1,2,4-triazolidine-3,5-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hasaninejad, Alireza; Zare, Abdolkarim; Shekouhy, Mohsen; Tetrahedron; vol. 67; 2; (2011); p. 390 – 400;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6,Some common heterocyclic compound, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) and p-quinonemethide precursor 7 (2.9 mmol) were refluxed for 4 h in DMF (10mL). Products were isolated analogously to compound 4a.

The synthetic route of 7411-23-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-88-0, name is 1H-1,2,4-Triazole, A new synthetic method of this compound is introduced below., SDS of cas: 288-88-0

EXAMPLE 1 This Example illustrates the preparation of 1-trityl-1,2,4-triazole. A solution of trityl chloride (417.7 g) in dichloromethane (1.21) was added slowly over two hours, whilst maintaining the temperature below 50 C. by external cooling, to a solution of 1,2,4-triazole (103.5 g) and triethylamine (151.5 g, 209 ml) in N,N-dimethylformamide (500 ml). The mixture was then stirred for a further one hour, poured into water (21) and extracted with dichloromethane (5*500 ml). The extracts were dried over magnesium sulphate, evaporated under reduced pressure and the crude product triturated with ether (200 ml total) to give the title compound (425 g, m.p. 213-214 C.). NMR (CDCl3): delta7.1-7.4 (15H,m), 8.03(1H,s), 8.08(1H,s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Zeneca Limited; US5393732; (1995); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1533519-84-4, name is 4-(4-Cyclopropylnaphthalen-1-yl)-1H-1,2,4-triazole-5(4H)-thione, A new synthetic method of this compound is introduced below., Formula: C15H13N3S

Ethanol 535g was first added to a 1L four-necked flask at room temperature.Compound IV (106.9 g, 0.4 mol) was added with stirring and Compound Va (47.3 g, 0.22 mol) was added.Slowly warm up to 50-55C under nitrogen protection. The solid dissolves completely.Potassium bicarbonate 48 g was added in portions over 60-80 minutes. After the addition, the reaction is incubated at 50-55C for 2-3 hours.The disappearance of the TLC monitoring point indicates the end of the reaction.After the reaction was completed, insoluble material was removed by hot filtration, and the resulting filtrate was slowly cooled to -5C.A large number of white solids precipitated, and 100 ml of deionized water was added dropwise to the reaction flask over 1-2 hours to crystallize sufficiently.And remove inorganic salts. After deionized water is added, it is crystallized at -5C for 2 hours and filtered.The filter cake was washed with 100 ml of 95% ice-cold ethanol. The resulting compound (IIIa) was vacuum-dried,Dry at a temperature of 50-55C for 24 hours. 124.5 g of compound (IIIa) was obtained with a yield of 92%.

The synthetic route of 1533519-84-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Xin Donggang Pharmaceutical Co., Ltd.; Yan Jianbo; Ma Liangxiu; Lin Yi; Hong Huabin; (16 pag.)CN107739344; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, A common heterocyclic compound, 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step A Synthesis of 8-methoxy-2-methyl-4-(5-methyl-l//-l,2,4-triazol-l-yl)quinoline and 8- methoxy-2-methyl-4-(3 -methyl- H- 1 ,2,4-triazol- 1 -yl)quinoline4-chloro-8-methoxy-2- methylquinoline (100 mg, 0.481 mmol) was reacted with 3-methyl- IH-l, 2,¡¤ 4-triazole (46.0, 0.554 mmol) according to the synthesis of 4-(4-fluoro- 1 /Y-pyrazol- 1 -yl)-8-mcthoxy-2-mcthylquinolinc to give a mixture of the title compounds. MS (m/z): 255.3 [M+H+] Step B Synthesis of 2-methyl-4-(3-methyl-l//-l,2,4-triazol-l-yl)quinolin-8-ol and 2-methyl- 4-(5-methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-ol (0284) A mixture of 8-mcthoxy-2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc and 8- mcthoxy-2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc (153 mg, 0.602 mmol) was demethylated according to the synthesis of 4-(4-fluoro-l//-pyrazol-l-yl)-2-methylquinolin-8-ol to give a mixture of the title compounds. MS (m/z): 241.1 [M+H+] Step C. Synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((2-methyl-4-(5-methyl-l//-l,2,4-triazol-l- yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (0286) A mixture of 2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol and 2-methyl-4-(5- mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol (48.3 mg, 0.201 mmol) was reacted with (5)-2-(l-(3- chloro-2-(chloromethyl)-5-fluorophenyl)ethyl)isoindoline-l,3-dione (70.7 mg, 0.201 mmol) according to the synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((4-(4-fluoro-l/7-pyrazol-l-yl)-2- methylquinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline-l,3-dione to give a mixture of the title compounds. MS (m/z): 556.4 [M+H+] Step D. Synthesis of (5′)- 1 -(3-chloro-5-fluoro-2-((2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 – yl)quinolin-8-yloxy)methyl)phenyl)ethanamine and (5)- 1 -(3-chloro-5-fluoro-2-((2-methyl-4-(3- methyl- H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethanamine (0287) A mixture of (S)-2-( 1 -(3-chloro-5-fluoro-2-((2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 – yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (111 mg, 201 miho) was deprotected according to the synthesis of (5)-l-(3-chloro-5- fluoro-2-((4-(4-fluoro- l/ -pyrazol- 1 -yl)-2-methylquinolin-8-yloxy)methyl)phenyl)ethanamine to give the title compounds. MS (m/z): 448.3 [M+Na+]

The synthetic route of 7170-01-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PHARVARIS B.V.; GIBSON, Christoph; SAUPE, Joern; AMBROSI, Horst-Dieter; HAUSTEDT, Lars Ole; (99 pag.)WO2019/101906; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4928-87-4, COA of Formula: C3H3N3O2

To a reaction of H-, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and 4- (tert-butyl)aniline (0.33 mL, 2.1 mmol) in dry DMF (10 mL) was added 1- hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24.0 h, and then slowly diluted into iced water and extracted with DCM (2 x 50 mL). The DCM phase was washed with ice cold water (2 x 100 mL). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using EtOAc and Hexanes (60:40) as eluents to get the desired amide 13 (123 mg, 25 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): (br s, 1H), 7.74 (d, J= 8.8 Hz, 2H), 7.37 (d, J= 8.4 Hz, 2H), 1.28 (s, 9H) ppm. MH+ = 245.2 m/z.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,2,4-Triazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 584-13-4, name is 4H-1,2,4-Triazol-4-amine, molecular formula is C2H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 4H-1,2,4-Triazol-4-amine

General procedure: In a typical experiment Pd(OAc)2 (5.6mg, 0.025mmol), triphenylphosphine (13.2mg, 0.05mmol), iodoalkene (1-4) or iodoarene (5-19) (1mmol) were dissolved in DMF (10mL) under argon in a three-necked flask equipped with a reflux condenser and a balloon on the top. Aminotriazole nucleophile (a, b or c) (1.2mmol) and triethylamine (0.5mL) were added. The atmosphere was changed to carbon monoxide. (Caution: High pressure carbon monoxide should only be used with adequate ventilation (hood) using CO sensors as well.) The reaction was conducted for the given reaction time upon stirring at 70C. The mixture was then concentrated and evaporated to dryness. Toluene (15mL) was added to the residue, the precipitate (product) was filtered, washed with water on the filter and dried. The off-white powder-like material was dissolved in methanol, the palladium-black was filtered off and methanol was evaporated.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 584-13-4, its application will become more common.

Reference:
Article; Gergely, Mate; Boros, Borbala; Kollar, Laszlo; Tetrahedron; vol. 73; 48; (2017); p. 6736 – 6741;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics