Category: Triazoles

Adding a certain compound to certain chemical reactions, such as: 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1455-77-2, Recommanded Product: 3,5-Diamino-1,2,4-triazole

To a solution of 54.2 g (0.786 mol) of sodium nitrite in63.3 mL water at -10 to -5 ¡ãC, we added a solution of 8 g(0.081 mol) of DAT in 169.5 mL 1.2 mol/L sulfuric acid for1.5 h, the reaction mixture was heated up to 60 ¡ãC and stirredfor another 1 h, then cooled the reaction mixture to roomtemperature. 26.9 mL 6 mol/L sulfuric acid and 4.7 g (0.048mol) aminosulfuric acid were added to reaction system andstirred for another 0.5 h, extracted with 90 ¡Á 5 mL of ether,dried with magnesium sulfate and the solvent was removedunder reduced pressure and 7.89 g yellow oil 3,5-dinitro-1,2,4-triazole (DNT) was obtained with a yield of 61.4 percent. 1H NMR(DMSO-d6, 500 MHz), d: 6.424 (s, 1H, NH); 13C NMR(DMSO-d6, 125 MHz), d: 162.56; IR (KBr, nmax, cm-1), 3224(-NH-), 1659, 1382 (-NO2); Anal. calcd for C2H3N5O5: C 13.57,N 39.55, H 1.71; found C 13.73, N 38.91, H 2.13; MS (m/z):159 [M+].

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Li, Ya-Nan; Liu, Ning; Su, Peng-Fei; Wang, Ying-Lei; Ge, Zhong-Xue; Li, Hui; Wang, Bo-Zhou; Asian Journal of Chemistry; vol. 26; 21; (2014); p. 7151 – 7156;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1533519-85-5, These common heterocyclic compound, 1533519-85-5, name is Methyl 2-((4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl)thio)acetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 11. Preparation of methyl 2-((5-bromo-4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate [076] To a flask added methyl 2-((4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate (4.0 g, 11.8 mmol), l,3-Dibromo-5,5-dimethylhydantoin (11.8 mmol) and ethyl acetate (100 mL) to form a mixture, the mixture was heated to reflux, after the reaction was complete, the mixture was cooled to room temperature, then worked up to obtain phenyl 2-((5-bromo-4-(4-cyclopropylnaphthalen-l-yl)-4H-l,2,4-triazol-3-yl)thio)acetate as a yellow solid 4.9 g, yield 99%, LC-Ms: m/z (ESI): 418,420 (M+H)+, 1H NMR (400 MHz, CDC13): delta 8.57 (d, J=8.0 Hz, 1 H), 7.69 (m, 1 H), 7.61 (m, 1 H), 7.39 (s, 2 H), 7.26 (d, J=8.4 Hz, 1 H), 4.07 (dd, J=16.0, 25.6 Hz, 2 H), 3.75 (s, 3 H), 2.46 (m, 1 H), 1.20 (m, 2 H), 0.91 (m, 2 H).

The synthetic route of 1533519-85-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; CHEN, Weiqiang; LUO, Jian; LIU, Lixue; FAN, Yuping; WO2014/198241; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 6523-49-5, These common heterocyclic compound, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of Intermediate 11 (96mg, 0.23mmol, leq), and 4-(7No.-l,2,4-triazol-l- yl)aniline (38mg, 0.24mmol, 1.05mmol) in acetic acid (2mL) was heated at reflux. After Ih the reaction was allowed to cool to room temperature, concentrated in vacuo and treated with a saturated aqueous solution OfK2CO3 until effervescence ceased. The resulting mixture was then concentrated in vacuo to dryness to yield a brown residue. The residue was purified using flash column chromatography, eluting initially with 200:8:1 and then 100:8:1 CH2Cl2 :EtOH:NH3. The title compound was isolated as an off-white solid (48mg, 40%). Rf = 0.39 (40:8:1 CH2Cl2:Et0H:NH3). 1H-NMR (DMSCwZ6) 2.11 (s, 6H), 2.17 (s, 3H), 2.43 (m, 2H), 2.68 (t, 2H), 4.08 (t, 2H), 7.23 (m, IH), 7.56 (m, IH), 7.75 (m, 3H), 7.93 (m, 2H), 8.08 (m, 2H), 8.50 (s, IH), 8.68 (s, IH), 9.14 (s, IH), 9.92 (br. s, IH). LC-MS rt 2.08 m/z 527 ES+

Statistics shows that 4-(1,2,4-Triazol-1-yl)aniline is playing an increasingly important role. we look forward to future research findings about 6523-49-5.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-36-8, name is 1H-1,2,3-Triazole, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C2H3N3

To a solution of 5-fluoro-2-iodo- benzoic acid (3.86 g, 14.65 mmol), 2H-[1 ,2,3]triazole (2.5 g, 36.2 mmol),Cs2CO3 (8.62 g, 24.5 mmol), trans-N, N’-dimethyl-cyclohexane-1 ,2-diamine (0.4 ml_), Cul (244 mg) and DMF (13 ml_) were added to a microwave ready vessel and heated to 100 C for 10 min. The mixture was cooled, diluted with water, and extracted with EtOAc. The aqueous layer was acidified and extracted with EtOAc. The organic layer was dried over Na2SO and concentrated. The residue was purified by FCC (SiO2, gradient DCM to 10% MeOH/1 %HOAc/DCM) gave the product as a white powder, (2.14 g, 71 %). 1H NMR (400 MHz, CD3OD): 7.91 (s, 2H), 7.76 (dd, J = 8.9, 4.8 Hz, 1 H), 7.59 (dd, J = 8.5, 2.9 Hz, 1 H), 7.49 – 7.42 (m, 1 H).; Intermediate 53: 2-[1 ,2,3]Triazol-1 -yl-benzoic acid.The title compound was isolated from the synthesis of Intermediate 13. 1H NMR (400 MHz, CD3OD): 6.70 (d, J = 0.9 Hz, 1 H), 6.50 (dd, J = 7.7, 1 .5 Hz, 1 H), 6.30 (d, J = 1 .0 Hz, 1 H), 6.24.6.18 (m, 1 H), 6.17 -6.1 1 (m, 1 H), 6.01 (dd, J = 7.8, 1 .0 Hz, 1 H).

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50200; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 288-36-8, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-36-8 as follows.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to 00C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-4 as a yellow solid.

According to the analysis of related databases, 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; FLORES, Broc; SCHREIER, John, D.; WO2010/48016; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 143426-50-0, name is 4-(1,2,4-Triazol-1-yl)benzyl Alcohol, belongs to triazoles compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 143426-50-0, COA of Formula: C9H9N3O

A mixture of 14 (100 mg, 0.34 mmol), [4-(1H-1,2,4-triazol-1-yl)phenyl]methanol16 (118 mg, 0.67 mmol)and (tributylphosphoranylidene)acetonitrile (163 mg, 0.68 mmol) in toluene (2 mL) wasstirred at 100 C for 1.5 h and allowed to cool to room temperature. Themixture was evaporated in vacuo and the crude mixture was purifiedusing amino-functionalized silica-gel column chromatography (CHCl3)and washed with diisopropyl ether to give N-ethyl-5-(2-methyl-8-{[4-(1H-1,2,4-triazol-1-yl)phenyl]methoxy}imidazo[1,2-a]pyridin-3-yl)pyridine-2-carboxamide (87 mg). Next, 4M HCl in EtOAc (0.20 mL,0.80 mmol) was added to a 2.2 mL EtOAc-EtOH (10:1) solution of thiscompound. After stirring at room temperature, the precipitate was filteredto give the product as a beige solid (87 mg, 49% yield [2 steps]).1H NMR (DMSO-d6) delta ppm 1.16 (3H, t, J=7.1 Hz), 2.50 (3H, s),3.33-3.43 (2H, m), 5.59 (2H, s), 7.39 (1H, dd, J=8.0, 6.9 Hz), 7.63(1H, d, J=8.2 Hz), 7.80-7.85 (2H, m), 7.94-7.99 (2H, m), 8.24-8.32(4H, m), 8.88 (1H, dd, J=2.0, 1.0 Hz), 8.96 (1H, t, J=6.1 Hz), 9.37(1H, s); MS (ESI) m/z [M+H]+ 454. HRMS (ESI) m/z calcd forC25H24N7O2 ([M+H]+): 454.1986. Found: 454.1989. Anal. calcd forC25H23N7O21.5HCl¡¤2.3H2O0.15EtOAc: C, 54.63; H, 5.43; N, 17.42;Cl, 9.45. Found: C, 54.87; H, 5.32; N, 17.72; Cl, 9.10.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(1,2,4-Triazol-1-yl)benzyl Alcohol, and friends who are interested can also refer to it.

Reference:
Article; Sekioka, Ryuichi; Honda, Shugo; Honjo, Eriko; Suzuki, Takayuki; Akashiba, Hiroki; Mitani, Yasuyuki; Yamasaki, Shingo; Bioorganic and Medicinal Chemistry; vol. 28; 1; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1257633-67-2, These common heterocyclic compound, 1257633-67-2, name is 1-(tert-Butyl)-4-(diethoxymethyl)-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Synthesis of 1-tert-butyl-1H-1,2,3-triazole-4-carbaldehyde To a 50-mL round bottom flask was added a solution of 1-tert-butyl-4-(diethoxymethyl)-1H-1,2,3-triazole (1.28 g, 5.63 mmol) in dichloromethane (6.0 mL), followed by addition of water (3.0 mL) and trifluoroacetic acid (1.0 mL). The reaction was stirred vigorously under nitrogen for 3 h until TLC analysis indicated the complete disappearance of the starting material (10% EtOAc in dichloromethane, starting material Rf 0.5, product Rf 0.6, KMnO4 stain). The reaction mixture was diluted with EtOAc (100 mL), washed with sat aq NaHCO3 (3*40 mL) and brine (40 mL). The combined organic phases were dried over anhydrous MgSO4, filtered, and concd in vacuo to provide 0.71 g of a light yellow oil (yield: 82%). The crude product was used without purification.

Statistics shows that 1-(tert-Butyl)-4-(diethoxymethyl)-1H-1,2,3-triazole is playing an increasingly important role. we look forward to future research findings about 1257633-67-2.

Reference:
Patent; Albert Einstein College of Medicine of Yeshiva Uni; Wu, Peng; Soriano del Amo, David; Wang, Wei; Marlow, Florence L.; US2013/295019; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 1455-77-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1455-77-2 name is 3,5-Diamino-1,2,4-triazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Added to three neck fever bottle 126mmol oleic acid, 60mmol3,5-diamino -1, 2, 4-three nitrogen […] 20.9g glycol solvent, under the protection of argon gas, heating 80 ¡ãC after melting, by adding 3mmol potassium hydroxide, wherein the oleic acid: 3,5-diamino -1, 2, 4-triazole: potassium hydroxide mole ratio is 2.1: 1 : 0.05, glycol as the above-mentioned reactant of the total weight of the 50percent. Continued heating to 150 ¡ãC, reaction 12h rear, with 1percent sodium carbonate water solution, in order to remove unreacted oleic acid and the solvent is ethylene glycol, yellow solid is obtained after drying a heterocycle-containing fatty acid amide-based intermediate A.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3,5-Diamino-1,2,4-triazole, and friends who are interested can also refer to it.

Reference:
Patent; China Petroleum & Chemical Corporation; Yu, Jianye; Lu, Minhui; Yuan, Ping; Yuan, Yufeng; (9 pag.)CN105693640; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 67545-00-0, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67545-00-0, name is 4-Amino-1-methyl-1,2,3-triazole, This compound has unique chemical properties. The synthetic route is as follows.

Example 293c 5-Bromo-1-methyl-3-(1-methyl-1H-1,2,3-triazol-4-ylamino)pyridin-2(1H)-one 293c Following the procedure in Example 130c, and starting with 293b (500 mg, 5.10 mmol, 1.0 eq.) and 3,5-dibromo-1-methylpyridin-2(1H)-one (2.04 g, 7.65 mmol, 1.5 eq.) afforded 293c as a yellow solid (760 mg, 52%). MS-ESI: [M+H]+ 283.9.

The chemical industry reduces the impact on the environment during synthesis 4-Amino-1-methyl-1,2,3-triazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; F.Hoffmann-La Roche AG; CRAWFORD, James John; ORTWINE, Daniel Fred; WEI, BinQing; YOUNG, Wendy B.; EP2773638; (2015); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2,Some common heterocyclic compound, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Compound 3 (30 mg, 199 muiotaetaomicron) was combined with 3H-[l,2,3]triazole-4- carboxylic acid (22 mg, 199 muiotaetaomicron), HATU (76 mg, 199 muiotaetaomicron) and DIPEA (104 mu, 596 muiotaetaomicron) in DMF (1 mL) and stirred at room temperature for 20 minutes then concentrated in vacuo and the crude residue was purified by normal phase chromatography (0-100% EtOAc/hexanes). The intermediate (30 mg, 67 muiotaetaomicron) was dissolved in THF (1 mL) and 10N NaOH (268 mu^, 268 muiotaetaomicron) and stirred at room temperature for 1 hour. The mixture was acidified with AcOH and purified by preparative HPLC to yield Compound 4 (10 mg).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-[1,2,3]Triazole-4-carboxylic acid, its application will become more common.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics