Category: Triazoles

Related Products of 135242-93-2,Some common heterocyclic compound, 135242-93-2, name is (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, molecular formula is C4H7N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of carbonyldiimidazole (CDI) (97 g, 0.6 mol), (l-methyl-l,2,4-triazol-3- yl)methanol [8] (67.7 g, 0.6 mol), and 2-MeTHF (1150 mL) was stirred at room temperature (20 C) for 2 hours. The reaction mixture was added to a stirred mixture of (S)- 1 -amino-N- (3-chloro-4-fluorophenyl)-7-fluoro-2,3-dihydro-lH-indene-4-carboxamide hydrochloride [7.HC1] (143.3 g, 0.4 mol), 2-MeTHF (860 mL), and N,N-diisopropylethylamine (129 g, 1 mol). The mixture was heated to 60 C and the contents maintained at 60 C for 6 hours. (0248) The contents were cooled to 20 C, water (285 mL) was added, and the mixture was stirred for 15 min. The layers were separated and the organic layer was washed with water two times (285 mL each time). The organic layer was filtered through a pad of CELITE, and rinsed with 145 mL 2-MeTHF (1 volume). The solution was concentrated to about 700 mL under vacuum. 2-propanol (710 mL) was added and the mixture concentrated to about 700 mL. Additional 2-propanol (710 mL) was added and the mixture concentrated to (0249) approximately 1000 mL. The slurry was heated at 45 C for 2 hours and cooled to 20 C over 1 hour. The slurry was stirred at 20 C for 2 hours, and the product filtered. The product was washed with 2-propanol two times (286 mL each wash), and the wet product was dried under vacuum to give (l-methyl-lH-l,2,4-triazol-3-yl)methyl fV)-(4-((3-chloro-4- fluorophenyl)carbamoyl)-7-fluoro-2,3-dihydro-lH-inden-l-yl)carbamate [9] as solid (144.5 g, 78.4% yield). XH NMR (400 MHz, DMSO-d6) d 10.39 (s, 1H), 8.42 (s, 1H), 8.06-7.99 (m, (0250) 1H), 7.81 (d, J = 8.8 Hz, 1H), 7.71-7.59 (m, 2H), 7.39 (t, J = 9.1 Hz, 1H), 7.14 (t, J = 8.8 Hz, 1H), 5.26 (q, J = 7.7 Hz, 1H), 4.99 (dd, J = 20.0, 12.0 Hz, 1H), 3.83 (s, 2H), 3.21 (ddd, J = 17.1, 8.8, 5.1 Hz, 1H), 3.04-2.96 (m, 1H), 2.46-2.33 (m, 1H), 1.92-1.83 (m, 1H). mp: 185.9- 186.9 C.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (1-Methyl-1H-[1,2,4]triazol-3-yl)methanol, its application will become more common.

Reference:
Patent; ARBUTUS BIOPHARMA CORPORATION; COLE, Andrew G.; KULTGEN, Steven; PAMULAPATI, Ganapati Reddy; SPINK, Jan Michelle; (76 pag.)WO2019/200114; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of Sodium 1,2,4-triazol-1-ide

First, 3.8 g of 1,2,4-triazole were dissolved in 8 ml of NMP at 2O0C. Then,2.2 g of NaOH and 22 ml of NMP were added in portions over 1 hour, maintaining the temperature at less than 350C. The solution was stirred for 2 hours at 20C, and 7.8 g of Na2SO4 were then added. After filtration of the solid, the resulting solution was transferred to a dropping funnel, and added over 75 minutes to a solution of 14 g of crude l,3-benzenediacetonitrile-5-(bromomethyl)-alpha,alpha,alpha’,alpha’ tetramethyl (having a purity of 81.8%, containing: 3,5-bis(2-cyanoisopropyl)toluene 4.0%, l,l-dibromo-3,5-bis(2- cyanoisopropyl)toluene 10.7%, and other impurities 3.5% ) in 20 ml of NMP, cooled to -3O0C. At the end of the addition, the suspension was stirred at -300C for 18 hours, and monitored via HPLC. When the concentration of starting material is less than 0.5 percent, an amount of acetic acid sufficient to give a pH of about 6.5 to about 7.0 is added (an HPLC analysis of the crude reaction mixture showed: residual starting material 0.4%, Anastrozole 68.9%, Isoanastrozole 5.5%, 3,5-bis (2-cyanoisopropyl)toluene 7.5%, 1,1-dibromomethyl- 3,5-bis(2-cyanoisopropyl)benzene, and 15.4%, and other impurities 2.3%.). The mixture is then allowed to warm slowly to 200C, filtered, and 37 ml of toluene, 75 ml of heptane, and 37 ml of water are added. The biphasic system is stirred vigorously for 30 minutes, and the organic layer is then separated. Water, toluene, and heptane in amounts of 25 ml, 25 ml, and 50 ml, respectively, are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Then, 10 ml of toluene and 20 ml of heptane are added to the aqueous phase, and the system is stirred for 30 minutes before the organic phase is separated. Toluene and water, 99 ml and 400 ml, respectively, are added to the aqueous phase, and the resulting biphasic system is stirred for 1 hour. The organic layer is separated and washed 3 times with a mixture of MeOH and water (3 ml and 21 ml, respectively). The final organic phase is concentrated to 45 ml under reduced pressure at 400C, and 45 ml of heptane are added dropwise over 1 hour. The resulting suspension is cooled to 00C, stirred for 1 hour, and filtered. The crude solid is dissolved in toluene (40 ml) at 4O0C, and heptane (40 ml) is slowly added under stirring. The suspension is cooled to 00C, stirred for 1 hour, EPO and filtered. The solid is driejd at 55C under reduced pressure until constant weight is achieved, yielding 5.8 g of product with a purity as follows: Anastrozole 98.45%, Isoanastrozole 0.09%, 3,5-bis (2-cyanoisopropyl)toluene 0.06%, l-bromo-3,5-bis (2- cyanoisopropyl)toluene 0.11%, l,l-dibromo-3,5-bis(2-cyanoisopropyl)toluene 0.07%, other impurities 1.22% are by HPLC.

The synthetic route of 41253-21-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SICOR, INC.; WO2006/108155; (2006); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 63666-11-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 63666-11-5, name is Ethyl 5-amino-4H-[1,2,4]triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Solution A. A solution of KOH (0.56 g, 0.01 mol) and potassium salt of ethyl nitrocyanoacetate (1.96 g, 0.01 mol) in2 (8 ml) was stirred at room temperature for 3 h, then kept overnight. 4 M aqueous KOAc (8 ml, 0.03 mol) was added to the resulting solution, and the mixture cooled to 5. A mixture of 3-aminoazole 1a-i (0.010 mol), EtOH (10 ml),H2O (10 ml), and concentrated HCl (2.5 ml, 0.030 mol)was treated with a solution of NaNO2 (0.759 g, 0.011 mol)in H2O (3 ml) at -5 . The reaction mixture was kept at this temperature for 10 min, then added to the solution A. The mixture was kept at room temperature for 1 h; the formed precipitate was filtered, stirred with 40% aqueous H2SO4 (10 ml) (AcOH (10 ml) was used for compound 4e), filtered, and dried. The obtained hydrazone 3a-i was heated under reflux in DMF for 3 h. The solvent was evaporated, the residue triturated in water, filtered, and dried.

The synthetic route of Ethyl 5-amino-4H-[1,2,4]triazole-3-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Article; Voinkov, Egor K.; Ulomskiy, Eugeny N.; Rusinov, Vladimir L.; Chupakhin, Oleg N.; Gorbunov, Evgeny B.; Drokin, Roman A.; Fedotov, Victor V.; Chemistry of Heterocyclic Compounds; vol. 51; 11-12; (2015); p. 1057 – 1060; Khim. Geterotsikl. Soedin.; vol. 51; 11-12; (2015); p. 1057 – 1060,4;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 3641-14-3, These common heterocyclic compound, 3641-14-3, name is Methyl 5-Amino-1,2,4-triazole-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1 : Methyl 5-bromo-1 /–1.2.4-triazole-3-carboxylate (306a) Methyl 5-amino-1 H-1 ,2,4-triazole-3-carboxylate (6.5 g, 45 mmol) was suspended in a mixture of cone. H2S04 (6 ml_) and water (100 ml_). Then an aq. solution of NaN02 (6.4 g, 67 mmol) was added to the suspension at -3C. After 30 min at -3C a freshly prepared aq. solution of CuBr (4.2 g, 21 mmol) and KBr (13.0 g, 91 mmol) was added dropwise. After stirring for 3 h at 25C the mixture was extracted with EA. The crude product was purified by CC (DCM/CH3OH = 20/1) to give compound 306a (5.5 g, 58%) as a white solid.

The synthetic route of 3641-14-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PHENEX PHARMACEUTICALS AG; GEGE, Christian; KINZEL, Olaf; STEENECK, Christoph; KLEYMANN, Gerald; HOFFMANN, Thomas; WO2014/23367; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 76686-84-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 76686-84-5, name is 3-(1H-1,2,4-Triazol-1-yl)propanoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below.

Following the procedure of Example 3 using 2-aminodibenzthiophene (Bull. Soc. Chim. Fr. (1996), 133 (6), 597-610) and the appropriate acid the following compounds were prepared.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-(1H-1,2,4-Triazol-1-yl)propanoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Block, Michael Howard; Donald, Craig Samuel; Brittain, David Robert; Foote, Kevin Michael; US2003/225097; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

These common heterocyclic compound, 16778-70-4, name is 1-Ethyl-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C4H7N3

Intermediate 72; l-(2-Ethyl-2H-ri.2.41triazol-3-yl)-ethanone; n-Butyl lithium (424 ml, 1.6M solution in THF, 0.679 moles) was added dropwise to a solution of l-ethyl-lH-l,2,4-triazole (55 g, 0.566 moles) in THF (400 ml) at 0 C. After stirring for 1 hr at 0 C, N,N-dimethylacetamide (63 ml, 0.679 moles) was added to the reaction mixture and the stirring was continued for 1 hr. The progress of the reaction was monitored by TLC. The reaction mixture was quenched with sat. ammonium chloride solution and extracted with DCM. The combined organic layers were dried over sodium sulfate and concentrated. The crude material was purified by column chromatography (100% hexane followed by gradient elution to 10% ethyl acetate in hexane). Product (70 g) was obtained as light yellowish liquid. (Note : Since the product is volatile, it has to be distilled at less than 400 C) NMR (400 MHz, CDC13, delta): 1.42 (t, 3H), 2.69 (s, 3H), 4.58 (q, 4H), 7.90 (s, IH). MS (ES) (M+H)+: 140 for C6H9N3O.

The synthetic route of 1-Ethyl-1,2,4-triazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; PEER MOHAMED, Shahul, Hameed; WATERSON, David; WO2010/67125; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Some common heterocyclic compound, 162848-16-0, name is 4-[1,2,4]Triazol-1-yl-benzoic acid, molecular formula is C9H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Triazoles

General procedure: The ligand 4-Htba (0.1 mmol) was dissolved in DMF (5 mL), to which a DMF solution (5 mL) of Cd(NO3)2¡¤4H2O (0.1 mmol) was added with stirring for ca. 30 min. Then, the solution was sealed in a Teflon-linear autoclave and heated at 100 C for 3 days, after cooling to room temperature at a rate of 10 C/h, colorless blockc rystals of complex 1 were obtained in 58% yield (20.0 mg). Anal. Calcd for C10H7CdN3O4: C, 34.75; H, 2.04; N, 12.16%. Found: C, 34.71; H, 2.06; N, 12.14%. IR (KBr, cm-1): 1606vs, 1575vs, 1542vs, 1449m, 1410vs, 1368s, 1337s, 1303s, 1281s, 1229m, 1149m, 1051m, 994w, 975m, 873w, 854m, 812w, 781m, 724w, 698w, 669w, 646w, 541w. The same synthetic procedure as that for 1 was used except that Cd(NO3)2¡¤4H2O was replaced by Pb(NO3)2 (0.1 mmol), forming colorless block crystals of 2 in 54% yield (23.8 mg). Anal. Calcd for C10H7PbN3O4: C, 27.27; H, 1.60; N, 9.54%. Found: C, 27.22; H, 1.64; N, 9.49%. IR (KBr, cm-1): 1603s, 1557vs, 1383vs, 1340s, 1305m, 1277m, 1222m, 1143w, 1050w, 964w, 848w, 782m, 719w, 696w, 666w, 641w, 541w.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 162848-16-0, its application will become more common.

Reference:
Article; Mu, Yu-Hai; Ge, Zhi-Wei; Li, Cheng-Peng; Inorganic Chemistry Communications; vol. 48; (2014); p. 94 – 98;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 342617-08-7, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 342617-08-7 as follows.

A slurry of 3-(3-bromophenyl)-1H-1,2,4-triazole (58.5 g; 261 mmol; Step 1 above), anhydrous K2CO3(43.2 g; 313 mmol), and chloromethylpivalate (45 mL; 313 mmol) in dry MeCN (250 mL) was heated to 80 C. (Note 1) for 1 hour. The mixture was cooled, solid was collected by filtration and the filtrate was concentrated in vacuo. Residue from the filtaret was combined with the filtered solid and the whole was stirred with water approximately 20 minutes. Solid was collected by filtration, washed with water (¡Á3) and recrystallized from MeOH/water, affording the title compound as a colorless solid.

According to the analysis of related databases, 342617-08-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SMITHKLINE BEECHAM CORP; COWAN, D. J; LARKIN, A. L.; ZHANG, CUNYU; MUSSO, D. L.; GREEN, G. M.; CADILLA, R.; SPEARING, P.K.; BISHOP, M. J.; SPEAKE, J. D.; (219 pag.)CN102516115; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-36-8, name is 1H-1,2,3-Triazole, A new synthetic method of this compound is introduced below., Quality Control of 1H-1,2,3-Triazole

To a stirred solution of 1,2, 3-triazole (2.0 g, 28.9 mmol) in THF (10 mL) was added NaH (l.065g, 43.1 mmol) portion wise at 0 C under inert atmosphere. After being stirred for 45 min at 0C, 2-(trimethylsilyl)ethoxymethyl-Cl (SEM-C1; 7.6 mL, 43.1 mmol) was added to the reaction mixture. After completion of addition the reaction mixture was allowed to warm to RT and stirred for 12 h. The reaction mixture was quenched with water and extracted with ethyl acetate (2 x 100 mL). The combined organic extracts were washed with brine, dried over anhydrous Na2S04 and concentrated under reduced pressure to give crude compound. The crude material was purified by column chromatography eluting with 10% EtO Ac/hexane to afford N-2-(trimethylsilyl)ethoxymethyl- 1,2, 3-triazole (3.5 g, 17.5 mmol, 61%) as a liquid. Mass: m/z 200 [M++l].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; INNOCRIN PHARMACEUTICALS, INC.; THE REGENTS OF THE UNIVERSITY OF MICHIGAN; EISNER, Joel; WAHL, Daniel; SPEERS, Corey; (111 pag.)WO2020/77197; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, This compound has unique chemical properties. The synthetic route is as follows., Safety of (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol

A solution of 8.75 g (0.05 mol) of (1-phenyl-1H-1,2,3-triazol-4-yl)methanol (11) in 100 mL of methylene chloride was added in one portion with thorough stirring to a suspension of 16.15 g (0.075 mol) of freshly prepared pyridinium chlorochromate (PCC) in 200 mL of anhydrous methylene chloride. The mixture was stirred for 90 min at room temperature, 200 mL of anhydrous diethyl ether was added, the solution was separated from the black precipitate by decanting, and the precipitate was washed with diethyl ether (2 ¡Á 50 mL). The combined extracts were filtered through 20 g of silica gel, the solvent was distilled off under reduced pressure, and the residue was recrys-tallized from carbon tetrachloride. Yield 6.75 g (78%). mp 96-97C. 1 H NMR spectrum (500 MHz, DMSO-d 6 ), delta, ppm: 7.57 t (1H, p-H, J = 7.2 Hz), 7.65 t (2H, m-H, J = 7.2 Hz), 8.03 d (2H, o-H, J = 7.2 Hz), 9.59 s (1H, 5-H), 10.24 s (1H, CHO). Mass spectrum: m/z 174 [M + H] + . Found, %: C 62.45; H 4.14; N 24.21. C 9 H 7 N 3 O. Calculated, %: C 62.42; H 4.07; N 24.27.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 103755-58-4.

Reference:
Article; Pokhodylo; Tupychak; Shyyka, O. Ya.; Obushak; Russian Journal of Organic Chemistry; vol. 55; 9; (2019); p. 1310 – 1321; Zh. Org. Khim.; vol. 55; 9; (2019); p. 1393 – 1405,13;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics