Category: Triazoles

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 252742-72-6

Step A:; trans-5-[(4-{2-[(3,5-Dibromobenzyl)oxy]-2,3-dihydro-1H-inden-1-yl}piperazin-1-yl)methyl]-2,4-dihydro-3H-1,2,4-triazol-3-one After reconversion to the base, the compound obtained in Step C of Example 1 (2.14 mmol) is dissolved in 30 ml of dimethylformamide. There are added 0.75 ml (4.28 mmol) of diisopropylethylamine and 314 mg (2.35 mmol) of 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one prepared according to the method described in Tetrahedron Letters, 2000, 41, 8661. The mixture is stirred for 12 hours at ambient temperature and then evaporated to dryness. The residue obtained is taken up in dichloromethane, washed, dried, filtered and evaporated. The oil obtained is purified by flash chromatography on silica to yield the expected product.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, in my other articles.

Reference:
Patent; Peglion, Jean-Louis; Dessinges, Aimee; Goument, Bertrand; Millan, Mark; La Cour, Clotilde Mannoury; US2006/229318; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 7343-34-2, name is 3,5-Dimethyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 3,5-Dimethyl-4H-1,2,4-triazole

General procedure: The example reported for derivatives 22/23 find general application for all the other N-linked heterocycles. Sodium hydride 60percent dispersed in mineral oil was added at 0 °C to a solution of 3-(trifluoromethyl)-1H-pyrazole in dry DMF. The mixture was stirred at this temperature for 15 min, then for an additional 5 min at room temperature. A solution of derivative 45 in dry DMF (2 ml) was then added and the mixture was stirred at 50 °C for 3 h 30 min. After cooling to RT, a saturated NH4Cl solution was added and the mixture was extracted with Et2O (2.x.). The organic phase was washed with brine, dried over Na2SO4 and concentrated in vacuo. The residue was purified by Silica gel flash chromatography (gradient ethyl acetate in cyclohexane from 5 to 40percent) to give the intermediate BOC protected compound 22 and the intermediate BOC protected compound 23.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 7343-34-2, and we look forward to future research findings.

Reference:
Article; Micheli, Fabrizio; Cavanni, Paolo; Bettati, Michela; Bonanomi, Giorgio; Di Fabio, Romano; Fazzolari, Elettra; Marchioro, Carla; Roscic, Maja; Tarsi, Luca; Visentini, Filippo; Zonzini, Laura; Worby, Angela; Bioorganic and Medicinal Chemistry; vol. 19; 11; (2011); p. 3451 – 3461;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 217448-86-7, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 8; Synthesis of compound (I): 1-(2,6-Difluorobenzyl)-1H-1,2,3-triazole-4-carboxyamide (Rufinamide) Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate (II) (10.6 g, 41.9 mmoles), prepared as reported in Example 7, is dissolved in methanol (10 ml) and treated at room temperature under stirring with a 30% ammonia aqueous solution (40 ml), then the reaction mixture is refluxed and kept under stirring for 3 hours. The mixture is cooled to 20C, then diluted with water, filtered, and the resulting white solid is washed with water and dried in a static dryer at 50C. Rufinamide (8.7 g) is obtained as a crystalline white solid in 87% yield. 1H NMR (400 MHz, DMSO-d6), delta ppm: 8.56 (s, 1 H), 7.87 (bs, 1H), 7.60-7.43 (m, 2H), 7.20 (m, 2H), 5.72 (s, 2H).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate.

Reference:
Patent; Dipharma Francis S.r.l.; EP2230234; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 49607-51-4, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 5 ml of toluene were added to 100 mg (0.22 mmol) of 5-[4-chloro-3-(trifluoromethyl)phenoxy]-2-(methylsulphonyl)-6-(trifluoromethyl)pyrimidin-4(3H)-one (Example 40A) and 57 mg (0.67 mmol) of 4-amino-1H-pyrazole, and the mixture was then re-concentrated under reduced pressure. A drop of DMSO was added to the residue, and the mixture was then stirred at 150° C. for 1 h. The mixture was then purified directly by preparative HPLC [column: Chromatorex C18 10 mum, 250×30 mm; flow rate: 50 ml/min; run time: 45 min; detection: 210 nm; injection after 3 min of run time; mobile phase A: acetonitrile, mobile phase B: water; gradient: 10percent A (5.00 min)?95percent A (35.00-40.00 min)?10percent A (40.50-45.00 min)]. This gave 30 mg (31percent of theory) of the title compound.The Exemplary compounds below were prepared analogously to Example 104 from the appropriate 2-methylsulphonyl-substituted pyrimidinones and the respective amine components:(20percent of theory; without addition of DMSO)

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-Methyl-1H-1,2,4-triazol-3-amine.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; STRAUB, ALEXANDER; COLLIN, MARIE-PIERRE; KOCH, MICHAEL; MEYER-KIRCHRATH, JUTTA; SCHLEMMER, KARL-HEINZ; NISING, CARL FRIEDRICH; BIBER, NICOLE; ANLAUF, SONJA; GROMOV, ALEXEY; WITTWER, MATTHIAS BEAT; (392 pag.)TW2016/5831; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 13423-60-4, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 113 1-phenyl-4-(hepr-1-yl)triazolium bromide 0.150 g (0.002 mol) 1-phenyltriazole 1 (actually, 0.3 g, there were still 2 eq. DMF contained in the educt) and 0.97 ml (1.110 g, 0.006 mol) 1-bromoheptane 2 are combined in a pressure tube. The reaction mixture was stirred 12 h at 110 C. The reaction mixture is cooled down and the same volume petroleum ether is added. The precipitated solid is filtered off, washed with petroleum ether, and dried in HV. M 324.26 C15H22N3Br Yield: 0.225 g (69%) 1H-NMR DM-170 (300 MHz/DMSO): delta (ppm)=0.87 (t, 3H, 13-H); 1.30 (m, 8H, 9/10/11/12H); 1.95 (qui, 21-1,8-H); 4.34 (t, 2H, 7-H); 7.68 (m, 3H, 5/5’/6H); 7.95 (d, 2H, 4/4′-H); 9.55 (s, 1H, 1-H); 11.10 (s, 1H, 2-H) 13C-NMR DM-170 (300 MHz/DMSO):

In the meantime we’ve collected together some recent articles in this area about 1-Phenyl-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2HBr2N3

a) 3 ,5-Dibromo- 1 -ethyl- 1 H-[ 1 ,2,4]triazole 3,5-Dibromo-lH-l,2,4-triazole (2.5 g, 11.0 mmol, Eq: 1.00) was dissolved in dimethyl- formamide (31.8 ml) and sodium hydride (529 mg, 60% dispersion in mineral oil, 13.2 mmol, Eq: 1.2) was added slowly. Ethyl methanesulfonate (2.74 g, 2.27 ml, 22.0 mmol, Eq: 2) was added to the reaction and the mixture was heated in a microwave oven for 60 minutes at 100 C. The mixture was diluted with water and extracted 3x with ethyl acetate. The organic layer was dried over magnesium sulfate, filtered and the solvent was evaporated to give 3,5-dibromo-l-ethyl-lH- [l,2,4]triazole (2.54 g, 90.4%) as a white powder. MS: m/z= 255.9 (M+H+)

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 3,5-Dibromo-1H-1,2,4-triazole help many people in the next few years.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; FLOHR, Alexander; GROEBKE ZBINDEN, Katrin; KUHN, Bernd; LERNER, Christian; RUDOLPH, Markus; SCHAFFHAUSER, Herve; WO2013/178572; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 2-necked flask containing 1 -methyl-1 H-[1 ,2,3]triazole (162.91 mg; 1.96 mmol; 1.05 eq.) is added anhydrous THF (4.00 ml_) and the solution is cooled between -40 to -20C. To this colorless solution n-BuLi in hexane 1 .6M (1 .23 ml; 1 .96 mmol; 1 .05 eq.) is added dropwise. After stirring at 0C for 1 hour, a solution of pyridine-3-carbaldehyde (175.28 L; 1.87 mmol; 1 .00 eq.) in anhydrous THF (3.00 mL) is added and the reaction mixture is stirred for 3 h. After this time, RM is quenched by pouring into a saturated solution of NH4CI. Aqueous phase is extracted 3 times with n-BuOH. Organic layer is dried over Na2S04, filtered and concentrated in vacuo to obtain: (3-methyl- 3H-[1 ,2,3]triazol-4-yl)-pyridin-3-yl-methanol (243.00 mg; yield 66 %; 99 % by UPLC) is obtained as a beige oil.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; SELVITA S.A.; FABRITIUS, Charles-Henry Robert Yves; NOWAK, Mateusz Oktawian; WIKLIK, Katarzyna Anna; SABINIARZ, Aleksandra Barbara; BIE?, Marcin Dominik; BUDA, Anna Ma?gorzata; GUZIK, Pawel Szczepan; JAKUBIEC, Krzysztof Roman; MACIUSZEK, Monika; KWIECI?SKA, Katarzyna; TOMCZYK, Mateusz Micha?; GA??ZOWSKI, Micha? Miko?aj; GONDELA, Andrzej; DUDEK, ?ukasz Piotr; (681 pag.)WO2016/180536; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C9H7N3O

A mixture of beta ionone (0.48 g, 0.507 ml, 2.5 mmol), 4-(1H-1,2,4-triazol-1-yl) benzaldehydes (0.346 g, 2 mmol), cetyltrimethyl ammonium bromide (0.028 g, 0.20 mmol), sodium hydroxide (0.240 g, 6 mmol) and water (10 ml) was stirred at room temperature for 24 h. Reaction progress was monitored by TLC and compound was extracted with ethyl acetate (2 × 30 ml). The combined organic extract was washed with water (2 × 30 ml), brine solution (25 ml), dried (Na2SO4) and the solvent was removed in vacuum. The crude product was purified by column chromatography (SiO2, 60-120 mesh). Elution with 10 % ethyl acetate in hexane furnished a yellow coloured solid (0.164 g, 24%). Mp: 103-104OC; IR (KBr, cm-1): 2929, 1643 (C=O), 1590 (C=N); 1H NMR (CDCl3, 300 MHz): delta 1.05 (s, 6 H, CH3-8? and CH3-9?), 1.41-1.45 (m, 2H, CH2-5?), 1.55-1.61 (m, 2H, CH2-4?), 1.77 (s, 3H, CH3-7?), 2.04 (t, J = 6 Hz, 2 H, H-3?), 6.42 (d, J = 16 Hz, 1H, H-4), 6.96 (d, J = 16 Hz, 1H, H-2), 7.48 (d, J = 16 Hz, 1H, H-5), 7.61 (d, J = 16 Hz, 1H, H-1), 7.67 (brs, 4H, H-2?, H-3?, H-5? and H-6?), 8.06 (s, 1H, H-3???), 8.55 (s, 1H, H-5???); 13C NMR (CDCl3, 75 MHz): delta 18.86, 21.89, 2×28.87, 33.76, 34.18, 39.85, 2×120.08, 126.64, 129.35, 2×129.63, 134.87, 136.50, 137.26, 137.89, 140.69, 140.82, 143.54, 152.78, 188.66; ESI-MS m/z: 348 [M+1]+; Analysis calculated for C22H25N3O: C, 76.05; H, 7.25; N, 12.09; Found: C, 76.10; H, 7.19; N, 12.11.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 27996-86-7

Reference:
Article; Suryawanshi; Tiwari, Avinash; Kumar, Santosh; Shivahare, Rahul; Mittal, Monika; Kant, Padam; Gupta, Suman; Bioorganic and Medicinal Chemistry Letters; vol. 23; 10; (2013); p. 2925 – 2928;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

Step A: 6-methyl-3-(2H-1,2,3-triazol-2-yl)picolinonitrile To 3-bromo-5-methylpicolinonitrile (2.2 g, 11 mmol) in DMF (28 mL) was added K2CO3 (1.7 g, 12 mmol) and 2H-1,2,3-triazole (650 muL, 11 mmol). The mixture was heated to 100 C. for 36 h, cooled to rt and extracted with EtOAc. The combined organics were dried (Na2SO4) and concentrated. Purification via silica gel chromatography (10-100% EtOAc in hexanes) gave the title compound (1 g, 48%).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-36-8, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; GELIN, Christine F.; LEBOLD, Terry P.; SHIREMAN, Brock T.; US2014/275118; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 15988-11-1, name is 4-Phenyl-1,2,4-triazolidine-3,5-dione belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4-Phenyl-1,2,4-triazolidine-3,5-dione

General procedure: Dimedone (0.14 g, 1 mmol), benzaldehyde (0.1 g, 1 mmol), and 4-phenylurazole (0.177 g, 1 mmol) were mixed with PEG-SO3H (0.6 g, 0.1 mmol) and the obtained mixture was stirred magnetically at 80 C for 40 min. After the completion of the reaction warm water (20 mL) was added and the mixture stirred for about 5 min. The insoluble crude product was filtered and recrystallized from EtOH/H2O 4:1 and the pure product was obtained (0.352 g, 91%). In order to recover the catalyst, the filtrate was dried under reduced pressure and recovered catalyst was washed with diethyl ether and reused after drying under reduced pressure. The equivalent procedure was used for the synthesis of triazolo[1,2-a]indazole-tetraones.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 15988-11-1.

Reference:
Article; Hasaninejad, Alireza; Zare, Abdolkarim; Shekouhy, Mohsen; Tetrahedron; vol. 67; 2; (2011); p. 390 – 400;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics