Category: Triazoles

Reference of 184177-83-1, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 184177-83-1, name is 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 35.01 kg dimethyl sulfoxide, the mass concentration is 50% aqueous sodium hydroxide solution (sodium hydroxide 1.24 kg dissolved in pure water 1.24 kg, the mass concentration of the refer to sodium hydroxide of the quality of the sodium hydroxide solution the percentage of the total mass of the), adding 50L glass in the reactor, stirring solution cleaning, then adding 5.31 kg compound (III), stirring 20 – 30 minutes, adding 4.60 kg (3S, 5R) – toluene -4 – sulfonic acid 5 – (2, 4 – difluorophenyl) -5 – (1H – 1, 2, 4 – triazole -1 – yl) methyl tetrahydrofuran -3 – yl methyl ester (IV). After the completion of the feeding, temperature control 25 ± 5 C reaction 8 – 12 hours. TLC monitoring reaction, after the reaction. Control the temperature 20 – 30 C, the reaction with the sampler to 53.05 kg purification of water 100L glass reactor (rotational speed 200 – 300 rpm, dropping time 0.5 – 1.0 hours), continuously stirred for 0.5 – 1 hour. Centrifugal then adding to the basic solvent-free outflow; cake purified water 10.61 kg rear plate the basic solvent-free centrifugal to flow out. The centrifugal solid all input 50L glass in the reactor, adding 23.79 kg ethyl acetate, stirring until the solid completely dissolved. Layered, collecting the upper organic phase. Add silica gel 1.06 kg, heating to 50 – 60 C stirring 0.5 – 1 hour, cooled to 15 – 25 C, filtering. The filtrate batch transfer to 20L in the rotary evaporating bottle, at the vacuum degree of – 0.08 – – 0.1 mpa lower, control temperature 50 ± 10 C, concentrated to remove the ethyl acetate, to the solvent-free steam. To obtain brown oily matter. The oil of transfer to the 50L glass in the reactor, adding ethyl acetate 23.79 kg, heating to 50 ± 5 C, adds by drops positively hexane 36.71 kg (the dropping time 0.5 – 1.0 hours). Lowering the temperature to 20 ± 5 C stirring 2 – 3 hours, centrifugal to the solvent-free outflow, filter cake using mixed solvent (ethyl acetate 4.76 kg hexane 7.34 kg) leaching, centrifugal then adding to the solvent-free outflow. The centrifugal throughout the batch of wet product at the vacuum degree of – 0.08 – – 0.1 mpa lower, control temperature 40 – 50 C decompression drying 6 – 10 hours. A gray solid 6.00 kg compound (II). HPLC purity: 96.1%, yield: 73.4%.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1-((2S,3S)-2-(Benzyloxy)pentan-3-yl)-4-(4-(4-(4-hydroxyphenyl)piperazin-1-yl)phenyl)-1H-1,2,4-triazol-5(4H)-one.

Reference:
Patent; Shanghai Bozhi Yan Xin Pharmaceutical Co., Ltd.; Ying Shuhuan; Pi Hongjun; Liu Zhenfeng; Chen Jian; Qiao Yanhe; (12 pag.)CN106749207; (2017); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 64922-04-9, name is Ethyl 1H-1,2,4-triazole-5-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

(C-67) To a suspension of 1H-[1,2,4]triazole-3-carboxylate ethyl ester(Farmako, 1997, 52, p429)(1.0 g, 7.09 mmol)in ethanol(25 ml), were added 20% sodium ethoxide ethanol solution 3.3 ml and 4-fluorobenzylbromide(0.93 ml, 7.46 mmol) under ice-cooling and the mixture was stirred for 1.5 hour, Further, the mixture was stirred at room temperature for 30 minutes and at 80C for 40 minutes.. After cooling, water was added to the solution and the mixture was extracted with ethyl acetate.. The extract was washed with saturated brine and dried, then the solvent was evaporated under reduced pressure.. The residue was purified with silica gel column chromatography(ethyl acetate:n-hexane=1:1-1:3)to give 1-(4-fluorobenzyl)-1H-[1,2,4]triazole-3-carboxylate ethyl ester(754 mg, yield:42%). NNR(CDCl3)delta: 1.44(3H, t, J=7.2Hz), 4.48(2H, t, J=7.2Hz), 5.39(2H, s), 7.00-7.13(2H, m), 7.25-7.34(2H, m), 8.08(1H, s).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 64922-04-9.

Reference:
Patent; SHIONOGI & CO., LTD.; EP1422218; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a 50 mL round-bottomed flask equipped with a magnetic stirbar was added 1-H-l, 2. 3-triazole (0.192 g. 2.78 mmol) and DMF (10 mL) and then cooled to O0C while stirring. Then. sodium hydride (60% dispersion in mineral oil) (0.133 g. 3.33 mmol) is added to the reaction mixture and was slowly allowed to warm to ambient temperature. Then, l-iodo-4 pentyne (0.647 g, 3.33 mmol) was added dropwise. The reaction mixture was then heated to 800C and allowed to stir for 2.5 hours. Water (20 mL) was then added to the reaction mixture and then extracted with ethyl acetate (2 x 20 mL). The organic phase was dried with sodium sulfate and concentrated de vacuo followed by a purification by column chromatography (ethyl acetate/hexane) to produce l-Pent-4-ynyl-lH-[1.2.3]triazole (0.349 g. 93%) as a colorless oil. iH NMR (300 MHz, CDCb) delta 7.67 (s, IH). delta 7.59 (s. IH). delta 4.53 (t. 2H). delta 2.20 (t, 2H). delta 2.17 (m. 2H), delta 2.04 (s, IH) ppm: ?C NMR (75 MHz. CDCb) delta 133.9. 123.9. 82.2, 70.4. 48.7, 28.9. 15.7 ppm: HRMS (ESI) calcd for C7H10N3 (M-) 136.0869, found 136.0866

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; NORTH CAROLINA STATE UNIVERSITY; MELANDER, Christian; CAVANAGH, John; RITCHIE, David, F.; ROGERS, Steven, A.; HUIGENS, III, Robert, W.; WO2010/77603; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 16681-70-2

lH-l,2,3-triazole-4-carboxylic acid (9.8 mg, 87 muiotaetaomicron) and HATU (36.4 mg, 96 muiotaetaomicron) were combined in DMF (3.0 mL) and stirred at room temperature for 15 minutes. Compound 2 (40.3 mg, 87 muiotaetaomicron) and DIPEA (46 mu,, 261 muiotaetaomicron) were added and the resulting solution was stirred at room temperature for 15 minutes, after which time LCMS indicated desired product formation. The solvent was removed in vacuo and the crude residue was purified by reverse phase chromatography to yield Compound c (34.5 mg) as a TFA salt. MS m/z [M+H]+ calc’d for C28H3 found 558.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 16681-70-2

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-65-5, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference W02008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to afford a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

I am very proud of our efforts over the past few months and hope to 1-Methyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 6523-49-5, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline, molecular formula is C8H8N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of formamidine from Step 1 (150 mg) and 4-triazolyl-aniline (88 mg, leq) in AcOH (2ml) was heated to 80 for 16 h. Cooled, concentrated and cautiously treated with sodium bicarbonate (aq). The resulting solid was isolated by filtration, washed with water then DCM:EtOH:NH3 (20:8:1) added and refiltered. The filtrate was concentrated until a precipitate formed which was filtered, washed with ether and dried to give the title compound (82 mg, 34 %). 1U NMR delta 10.0 (IH, s), 9.18 (IH, s), 8.75 (IH, s), 8.54 (IH, s), 8.12 (2H, m),7.97 (IH, m), 7.92 (2H, m), 7.78 (3H, m), 7.66 (IH, m), 7.53 (IH, m); LC-MS rt 2.52 m/z 401 ES+.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 4-(1,2,4-Triazol-1-yl)aniline.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 7170-01-6

To a stiffing solution of 4-fluorobenzaldehyde (5.0 g, 40.32 mmol) in DMF (50 mL), were added K2CO3 (3.34 g, 40.32 mmol) and 3-methyl-1,2,4-trizole (3.34 g, 40.32 mmol) and the resultant reaction mixture was stirred at RT for 4 h. After completion of the reaction (TLC), the reaction mixture was diluted with water and extracted with EtOAc (3*). The combined EtOAc layer was washed with water and brine then dried over Na2SO4 and concentrated under reduced pressure to afforded the title compound as a white solid (4.1 g, 60%): mp 125-128 C.; 1H NMR (400 MHz, CDCl3) delta 10.05 (s, 1H), 8.76 (s, 1H), 8.02 (d, 2H), 7.85 (d, 2H), 2.50 (s, 3H); ESIMS m/z 188.04 ([M+H]+).

If you are hungry for even more, make sure to check my other article about 7170-01-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171312; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 1001401-62-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, molecular formula is C9H7N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

[( ?)-3-(3-lodo-benzyl)-morpholin-4-yl]-(2-[1 ,2,3]triazol-2-yl-phenyl)-methanone (B-28)A solution of (R)-3-(3-iodo-benzyl)-morpholine B-5 (100 mg, 0.33 mmol) and DIPEA (57 muIota_, 0.33 mmol) in DMF (1.5 mL) was added to a RT solution of 2-(2H-1 ,2,3-triazol-2-yl)benzoic acid E-2 (62 mg, 0.33 mmol), TBTU (1 1 1 mg, 0.35 mmol) and DIPEA (57 muIota_, 0.33 mmol) in DMF (1.5 ml) under argon and the resulting mixture was stirred for 22h. The reaction mixture was quenched with sat. aq. NaHC03 and stirred for 10 min before being diluted with water and extracted with DCM (3x). The combined organic extracts were washed with 2M aq . NaOH (1x), 2M aq. HCI (1 x) and brine (1x), dried over Na2S04, filtered and evaporated in vacuo. The crude product was purified by prep. HPLC (method F) to give the title compound as a white solid. LC-MS D: tR = 0.93 min; [M+H]+ = 474.91 .

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 2-(2H-1,2,3-Triazol-2-yl)benzoic acid, hurry up and to see.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOLLI, Martin; BOSS, Christoph; BROTSCHI, Christine; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi T.; WO2013/68935; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 3 4,5-Dibromo-1H-1,2,3-triazole STR12 To a solution of 140 g (1.32 moles) of sodium carbonate in 650 ml of water was added 75 g (661 mmoles) of 1H-1,2,3-triazole-4-carboxylic acid. The resulting solution was subjected to the dropwise addition of 208 g (1322 mmoles) of bromine and then stirred overnight at room temperature. After cooling to 0 C., the reaction was adjusted to pH 4 with 12N hydrochloric acid causing precipitation of 147 g (98%) of 4,5-dibromo-1-H1,2,3-triazole as a white solid. The structure was confirmed by n.m.r. and I.R.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-[1,2,3]Triazole-4-carboxylic acid.

Reference:
Patent; Stauffer Chemical Company; US4596596; (1986); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C2HBr2N3

[0614j A mixture of 3,5-dibromo-1H-1,2,4-triazole (8-P) (11 g, 50 mmol) andEt3N (10 mL) in DCM (200 mL) at rt was added 2-(trimethylsilyl)ethoxymethyl chloride(SEMC1) (8.5 g, 50 mmol) in portions. Subsequently, the mixture was stirred for 30 mins atrt, then the volatiles were removed. Purification by column chromatography on silica gel(PE) afforded 8-Q as colorless oil (17 g, 96%). +ESI-MS: mlz 299.7 [M-57].

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 7411-23-6

Reference:
Patent; ALIOS BIOPHARMA, INC.; WANG, Guangyi; BEIGELMAN, Leonid; TRUONG, Anh; NAPOLITANO, Carmela; ANDREOTTI, Daniele; HE, Haiying; WO2014/31784; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics