Category: Triazoles

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1H-1,2,3-Triazole

To a stirred solution of 1,2, 3-triazole (2.0 g, 28.9 mmol) in THF (10 mL) was added NaH (l.065g, 43.1 mmol) portion wise at 0 C under inert atmosphere. After being stirred for 45 min at 0C, 2-(trimethylsilyl)ethoxymethyl-Cl (SEM-C1; 7.6 mL, 43.1 mmol) was added to the reaction mixture. After completion of addition the reaction mixture was allowed to warm to RT and stirred for 12 h. The reaction mixture was quenched with water and extracted with ethyl acetate (2 x 100 mL). The combined organic extracts were washed with brine, dried over anhydrous Na2S04 and concentrated under reduced pressure to give crude compound. The crude material was purified by column chromatography eluting with 10% EtO Ac/hexane to afford N-2-(trimethylsilyl)ethoxymethyl- 1,2, 3-triazole (3.5 g, 17.5 mmol, 61%) as a liquid. Mass: m/z 200 [M++l].

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 288-36-8

Reference:
Patent; INNOCRIN PHARMACEUTICALS, INC.; THE REGENTS OF THE UNIVERSITY OF MICHIGAN; EISNER, Joel; WAHL, Daniel; SPEERS, Corey; (111 pag.)WO2020/77197; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 3,5-Dibromo-1H-1,2,4-triazole

General procedure: The prepared grades of R-Ni were weighed in water after considering its specific gravity. The residual water was removed using dean stark apparatus. (0043) All the reactions were carried out in a 2-neck round bottom flask, attached with a condenser. Typically, reaction was carried out by stirring and refluxing the reaction mixture of amine and alcohol with pretreated R-Ni in 20ml solvent. After reaction completion, reaction mixture was cooled and filtered using Whatman filter paper 40. The solvent was removed in vacuo. The mixture thus obtained was purified using column chromatography. The purified compounds obtained were characterized by IR, NMR, LC-MS and melting or boiling point. The analytical data obtained of the known compounds are in agreement to the reported literature.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole, in my other articles.

Reference:
Article; Mehta, Astha; Thaker; Londhe; Nandan, Santosh R.; Applied Catalysis A: General; vol. 478; (2014); p. 241 – 251;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C3H5N3

To a flask containing 1-methyl-1H-1,2,3-triazole (275 mg, 3.31 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (35 mL) and the colorless solution was cooled to -50 C. Then, n-butyllithium (2.5 M in hexanes, 1.2 mL, 3.0 mmol) was added dropwise which afforded a dark reddish-brown viscous solution. The mixture was stirred between -20 to -10 C. for 30 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)methanone (700 mg, 1.44 mmol in 4 mL THF, Intermediate 12: step f) was introduced at 0 C. The reaction mixture became a dark brown color and was allowed to warm gradually to room temperature. The mixture was stirred for 60 minutes at room temperature then quenched with aqueous NH4Cl solution. The aqueous portion was extracted with EtOAc, 3*50 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to provide a brown oil. Chromatography on silica gel (1% MeOH-DCM increasing to 5% MeOH-DCM) provided the title compound as a light brown solid. Racemic (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was separated into its individual enantiomers using the following conditions: Chiralcel OD, 20 uM (Diacel) using ethanol with 242 nM detection to give the first eluting enantiomer as Intermediate 84b and the second eluting enantiomer as Intermediate 84c.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 16681-65-5, and we look forward to future research findings.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 1455-77-2, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole, molecular formula is C2H5N5, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a stirred solution of MMB 14-O-succinate (2, 50 mg, 0.14 mmol) in dichloromethane was added EDC (40.26 mg, 0.21 mmol), HOBt (28.35 mg, 0.21 mmol), triethylamine (42.42 mg, 0.42 mmol) and the appropriate heterocyclic amine (0.14 mmol) at ambient temperature. The reaction mixture was stirred for 3-12 h at ambient temperature. When the reaction was complete (monitored by TLC), water was added and the resulting aqueous mixture was extracted with dichloromethane (2 * 10 mL). The organic layers were combined, washed with water followed by brine solution, and dried over anhydrous Na2SO4. The solvent was then evaporated under reduced pressure to afford the crude product. The crude product was purified by column chromatography (silica gel, 3-5% methanol in dichloromethane) to afford the desired succinamide analog as a white solid.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1455-77-2, Happy reading!

Reference:
Article; Janganati, Venumadhav; Ponder, Jessica; Thakkar, Shraddha; Jordan, Craig T.; Crooks, Peter A.; Bioorganic and Medicinal Chemistry; vol. 25; 14; (2017); p. 3694 – 3705;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 41253-21-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

e) Preparation of 2,2′-[5-(lH-l,2,4-triazoIe-l-yl -methyl)-l,3-phenylene] di (2-methyl propionitrile) (I).A mixture of 2,2′-(5-bromomethyl-l,3-phenylene)di(2-methylpropionitrile) (V) (4 gm, 0.013 moles) and 1,2,4-triazole sodium salt (2.40 gm, 0.026 moles) in N,N-dimethylformamide (28 ml) was heated under stirring at 45-50 C for 4 hour. The reaction mixture was cooled, poured into the ice-water and extracted with ethyl acetate. The ethyl acetate layer was separated and concentrated to give a residue. This residue was diluted with water, acidified with concentrated hydrochloric acid (adjusted the pH tol-2). The reaction mixture was heated at 50 C and subsequently filtered the hot solution. The mother liquor was treated with ammonia solution at 0- 50C (adjusted the pH to 8-9) and extracted with ethyl acetate. The ethyl acetate layer was separated and concentrated to obtain a residue (3.0 g).

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about Sodium 1,2,4-triazol-1-ide.

Reference:
Patent; USV LIMITED; WO2007/39913; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 74205-82-6, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: To a solution of indolines 6 (1.0 mmol) dissolved in acid (1.0 ml) in an icebath was added (1H-1,2,4-triazol-1-yl)methanol 5 (ammount as given in Table 1). Themixture was then stirred under the temperature and time given in Table 1. After completion of the reaction (TLC), the reaction mixture was poured intoice water, and 20% NaOH solution was added slowly to adjust the pH to 9. The product was extracted with dichloromethane. After removal of the solvent, theresidue was chromatographed over silica gel using dichloromethane-methanol togive 7 (yield as given in Table 1). The analytical and spectroscopic data for 7b and 7c are given below

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 74205-82-6.

Reference:
Article; He, Yi; Li, Xiaolong; Li, Jue; Li, Xiaocen; Guo, Li; Hai, Li; Wu, Yong; Tetrahedron Letters; vol. 55; 29; (2014); p. 3938 – 3941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7411-23-6

Intermediate 11 -l-(2-methylallyl)-lH-l,2,4-triazole To 3,5-dibromo-lH-l,2,4-triazole (1.5 g, 6.61 mmol) in DMF (13 mL) was added sodium tert- pentoxide (0.728 g, 6.61 mmol) and the mixture was stirred for 10 min at rt under nitrogen atmosphere. 3-Bromo-2-methylprop-l-ene (0.667 mL, 6.61 mmol) was added and the mixture was stirred at 40C for 2 hours. The mixture was poured onto water and extracted with diisopropylether (2x). The organic phase was washed with water (2x), brine and dried over sodium sulfate. The solvents were evaporated to give the title compound as a liquid (1.70 g, 91%). GCMS (CI) m/z 281 [M+]. XH NMR (400 MHz, CDCI3) delta ppm 1.74 (d, 3 H) 4.69 (s, 2 H) 4.81 – 4.86 (m, 1 H) 5.05 (dd, 1 H).

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 7411-23-6

Reference:
Patent; ACTURUM LIFE SCIENCE AB; BESIDSKI, Yevgeni; YNGVE, Ulrika; PAULSEN, Kim; LINDE, Christian; MALMBORG, Jonas; WO2014/195322; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-65-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A dry, N2 (g) flushed, 1 dram vial was charged with tetramethylammonium acetate (33.3 mg, 0.250 mmol), bis(triphenylphosphine)palladium dichloride (8.79 mg, 0.0130 mmol) and (S)-methyl 3-bromo-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H-pyrido[3,2-b]indole-7-carboxylate (60.0 mg, 0.125 mmol). To this was added 1-methyl-1H-1,2,3-triazole (20.8 mg, 0.250 mmol). The vial was again flushed with nitrogen. To this was added NMP (0.5 mL). The resulting mixture was stirred vigorously under a stream of nitrogen for 10 min. The vial was placed in a pre-heated oil bath at 95 C. and heated at that temperature overnight. The reaction was cooled to room temperature, diluted with EtOAc, washed with water (2×), then brine, dried over MgSO4, filtered, and concentrated. The residue was purified by column chromatography (100% EtOAc?1% MeOH/EtOAc) to give 39.5 mg (66%) as an off-white solid. 1H NMR (500 MHz, CDCl3) delta 8.61 (d, J=1.6 Hz, 1H), 8.50 (s, 1H), 8.47 (d, J=8.2 Hz, 1H), 8.10 (d, J=8.2 Hz, 1H), 7.82 (s, 1H), 7.75 (s, 1H), 7.53-7.45 (m, 2H), 7.42-7.35 (m, 2H), 7.35-7.30 (m, 1H), 5.63 (d, J=10.7 Hz, 1H), 4.11-4.03 (m, 4H), 3.98 (s, 3H), 3.86 (dd, J=11.7, 3.0 Hz, 1H), 3.57 (td, J=11.9, 1.7 Hz, 1H), 3.37 (td, J=11.9, 1.9 Hz, 1H), 3.22-3.09 (m, 1H), 2.11-2.01 (m, 1H), 1.72-1.59 (m, 1H), 1.50-1.38 (m, 1H), 1.07 (d, J=13.1 Hz, 1H). LCMS (M+H)=482.3.

In the meantime we’ve collected together some recent articles in this area about 1-Methyl-1H-1,2,3-triazole to whet your appetite. Happy reading!

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; Norris, Derek J.; Delucca, George V.; Gavai, Ashvinikumar V.; Quesnelle, Claude A.; Gill, Patrice; O’Malley, Daniel; Vaccaro, Wayne; Lee, Francis Y.; DeBenedetto, Mikkel V.; Degnan, Andrew P.; Fang, Haiquan; Hill, Matthew D.; Huang, Hong; Schmitz, William D.; Starrett, JR., John E.; Han, Wen-Ching; Tokarski, John S.; Mandal, Sunil Kumar; (220 pag.)US2016/176864; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4928-87-4, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a reaction of 1/7-1, 2, 4-triazole-3 -carboxylic acid (226 mg, 2.0 mmol) and (R)- l-(4-methoxyphenyl)ethan-l -amine (0.28 mL, 2.1 mmol) in dry DMF (10 mL) was added l-hydroxybenzotriazole monohydrate (337 mg, 2.2 mmol) and EDC (N-(3- Dimethylaminopropyl)-N’-ethylcarbodiimide) (422 mg, 2.2 mmol) followed by N- methylmorpholine (0.88 mL, 8.0 mmol via syringe). The mixture was stirred at room temperature under nitrogen and the solids were gradually dissolved. The contents were stirred at room temperature for 24 h, and then slowly diluted into iced water and extracted with DCM (50 mL x 2). The DCM phase was washed with ice cold water (100 mL x 2). The DCM phase was dried over anhydrous Na2S04, filtered and concentrated under reduced pressure and chromatographed on silica gel using MeOH and DCM (5:95) as eluents to get the desired amide 22 (287.1 mg, 58 % yield) as a white solid compound. -NMR (400 MHz, DMSO-de): <514.98-14.44 (m, 1H), 9.16-8.08 (m, 2H), 7.34 (d, J= 8.4 Hz, 2H), 6.88 (d, J= 8.8 Hz, 2H,), 5.18-5.04 (m, 1H), 3.73 (s, 3H), 1.48 (d, J= 7.2 Hz, 3H,) ppm. MH+ = 247.1 m/z. By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1,2,4-Triazole-3-carboxylic acid. Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; NATIONAL JEWISH HEALTH; WEMPE, Michael Fitzpatrick; VAZQUEZ-TORRES, Andres; DAI, Shaodong; (72 pag.)WO2020/41556; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 16681-65-5

n-BuLi (1.23 M in hexanes, 1.1 mL, 1.35 mmol) was added dropwise to a stirred slurry of 1-methyl-1,2,3-triazole (112 mg, 1.35 mmol) in THF (1 mL) at -40 C. under nitrogen. After stirring for another 30 minutes, the mixture was treated dropwise with a solution of (4-chloro-3-isopropoxy-2-methoxyquinolin-6-yl)(1,2-dimethyl-1H-imidazol-5-yl)methanone (252 mg, 0.67 mmol, Intermediate 27) in THF (5 mL). The reaction was allowed to warm to room temperature over 1 hour. The reaction was then quenched with saturated aqueous NH4Cl. The mixture was poured into a separatory funnel and extracted with DCM (4*60 mL). The organics were combined, washed with brine, dried (Na2SO4), filtered and concentrated to dryness to afford a light yellow oil. The crude material was purified by FCC (1-7.5% MeOH/DCM) followed by reverse-phase HPLC (acetonitrile/water+NH4OH) to provide the title compound as a white solid. 1H NMR (400 MHz, CDCl3) delta ppm 8.08 (d, J=2.2 Hz, 1H), 7.78 (d, J=8.7 Hz, 1H), 7.33 (dd, J=8.6, 2.2 Hz, 1H), 7.18 (s, 1H), 6.18 (s, 1H), 4.74-4.67 (m, 1H), 4.32 (s, 1H), 4.13 (s, 3H), 3.94 (s, 3H), 3.39 (s, 3H), 2.32 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.0 [M+H]+. [4-Chloro-2-methoxy-3-(1-methylethoxyl)quinolin-6-yl](1,2-dimethyl-1H-imidazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol was purified by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 muM 250*20 mm, Mobile phase: 70% CO2, 30% MeOH/iPrOH 50/50 v/v+(0.3% iPrNH2)) to give 2 enantiomers. The first eluting enantiomer was Example 80b: 1H NMR (400 MHz, CDCl3) delta ppm 8.09 (d, J=2.2 Hz, 1H), 7.77 (d, J=8.7 Hz, 1H), 7.32 (dd, J=8.7, 2.2 Hz, 1H), 7.17 (s, 1H), 6.17 (s, 1H), 4.75-4.66 (m, 1H), 4.36 (s, 1H), 4.13 (s, 3H), 3.94 (s, 3H), 3.39 (s, 3H), 2.32 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.2 [M+H]+ and the second eluting enantiomer was Example 80c: 1H NMR (400 MHz, CDCl3) delta ppm 8.06 (d, J=2.2 Hz, 1H), 7.80 (d, J=8.7 Hz, 1H), 7.35-7.32 (m, 1H), 7.21 (s, 1H), 6.24 (s, 1H), 4.74-4.67 (m, 1H), 4.13 (s, 3H), 3.95 (s, 3H), 3.52 (s, 1H), 3.42 (s, 3H), 2.37 (s, 3H), 1.39 (d, J=6.2 Hz, 6H). MS (ESI): mass calcd. for C22H25ClN6O3, 456.2. m/z found, 457.2 [M+H]+.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 16681-65-5.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics