Interesting scientific research on 1-Methyl-1H-1,2,3-triazole

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Synthetic Route of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 156a: (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,4-dimethyloxazol-5-yl)(1-methyl-1H-1,2,3-triazol-5-yl)methanol To a flask containing 1 -methyl- lH-1 ,2,3-triazole (200 nig, 2.41 mmol, prepared according to PCX int. AppL, 2008098104) was added Tl IF (20 mL) and the colorless solution was cooled to – 40 C. Then, -BuLi (2.5 M in hexanes, 1 ,0 mL, 2.5 mmol) was added drop wise which afforded a dark reddish-brown viscous solution. The mixture was stirred at -30 C for 35 minutes, then a homogeneous THF solution of (4-chioro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6- yl)(2,4-dimethyloxazol-5-yl)methanone (500 mg, 1.05 mmol, in 4 mL THF, Intermediate 87: step b) was introduced at -20 C. The reaction mixture became a dark brown color and was then placed in an ice-water bath and allowed to warm gradually to room temperature. After 45 minutes, the mixture was quenched with aqueous NH4C1 solution and extracted with EtOAc:THF (10:2), 4 x 50 mL. The combined organies were washed with brine, dried over Na2S04, filtered and concentrated to provide a brown oil. Chromatography on silica gel (3% MeOH-DCM increasing to 5% MeOH-DCM) to provide the title compound as a faint amber solid. MS m/e558.2 [M+H]+. H NMR (400 MHz, CDGU) delta ppm 8.15 (d, J = 2.0 Hz, 1H), 7.86 (d, J = 8.8 Hz, 1 1 1). 7.54 – 7.47 (m, 3H), 7.40 (d, ./ 8.1 Hz, 2H), 7.14 (s, IH), 4.35 (s, 2H), 4.10 (s, 3H), 4.03 (s, IH), 3.92 (s, 3H), 2.40 (s, 3H), 1.54 (s, 3H).Example 156a was separated by Chirai HPLC (Chiralpak AD column, 5 uM, using EtOH to provide the first eluting enantiomer as Example 156b ‘H NMR (400 MHz, CDC13) delta ppm 8.15 id. ./ 2.1 Hz, IH), 7.86 (d, J = 8.7 Hz, IH), 7.56 – 7.46 (m, 3H), 7.40 id. ./ 8.0 Hz, 21 1). 7.14 (s, IH), 4.34 (s, 2H), 4.09 is, 31 1). 3.91 (s, M l). 2.40 (s, 31 1). 1.54 (s, 3H); and the second eluting enantiomer as Example 156c H NMR (400 MHz, CDC13) delta 8.15 (d, J = 2.1 Hz, IH), 7.86 (d, J = 8.7 Hz, I H), 7.55 – 7.48 (m, 3H), 7.40 (d, J = 8.1 Hz, 2H), 7.14 (s, IH), 4.35 (s, 2H), 4.10 (s, 3H), 3.92 (s, 3H), 2.45 (s, 3H), 1.54 is, 3H).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,3-triazole, hurry up and to see.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Introduction of a new synthetic route about 61-82-5

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazol-5-amine help many people in the next few years.

Application of 61-82-5, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of 3-amino-1,2,4-triazole or benzimidazole (1.0 mmol), benzaldehyde (1.0 mmol), dimedone (1.0 mmol), and acetonitrile (5 mL) was taken in a round bottom flask and added iodine (10 mol %) and stirred at 80 C for 10 min. After completion of the reaction, as monitored by TLC, the reaction mass was cooled to room temperature and the solid separated was filtered and washed with water and dried at reduced pressure.Data of representative examples

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazol-5-amine help many people in the next few years.

Reference:
Article; Puligoundla, Ravinder Goud; Karnakanti, Shuklachary; Bantu, Rajashaker; Nagaiah, Kommu; Kondra, Sudhakar Babu; Nagarapu, Lingaiah; Tetrahedron Letters; vol. 54; 20; (2013); p. 2480 – 2483;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Introduction of a new synthetic route about 13273-53-5

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Bromo-1-methyl-1H-1,2,3-triazole.

Reference of 13273-53-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 13273-53-5, name is 4-Bromo-1-methyl-1H-1,2,3-triazole, molecular formula is C3H4BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of 6,8-dichloro-2-methyl-4-[3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-1,2,3,4-tetrahydroisoquinoline(50 mg) obtained in Reference Example 3-1 in a dioxane (1.0 mL)-water (0.25 mL) mixed solvent,4-bromo-1-methyltriazole (23 mg), tri(2-furyl)phosphine (17 mg), cesium carbonate (78 mg), and tris(dibenzylideneacetone)dipalladium(0) (11 mg) were added in a nitrogen gas atmosphere, and the mixture was stirred at 90C for 5 hours.The reaction solution was allowed to cool, and then, water was added thereto, followed by extraction with ethyl acetate. The organic layer was dried over anhydrous magnesium sulfate and filtered, and then, the filtrate was concentrated under reduced pressure. The obtained residue was purified by silica gel column chromatography (Biotage(registeredtrademark) SNAP Cartridge HP-Sphere, hexane:ethyl acetate = 100:0 ? 5:95) to obtain the title compound (12 mg,yield: 23%) as a light brown amorphous substance. 1H NMR (300 MHz, CDCl3) delta ppm 2.48 (s, 3H), 2.63 (dd, J=11.0, 8.5Hz, 1H), 3.03 (dd, J=11.0, 4.9Hz, 1H), 3.52 (d,J=15.7Hz, 1H), 3.84 (d, J=15.7Hz, 1H), 4.15 (s, 3H), 4.25-4.32 (m, 1H), 6.80-6.83 (m, 1H), 7.08-7.15 (m, 1H), 7.23 (d,J=2.0Hz, 1H), 7.33-7.40 (m, 1H), 7.60-7.80 (m, 3H). MS (+): 373 [M+H]+.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 4-Bromo-1-methyl-1H-1,2,3-triazole.

Reference:
Patent; Taisho Pharmaceutical Co., Ltd.; KURODA, Shoichi; KAWABE, Kenichi; USHIKI, Yasunobu; OHTA, Hiroshi; UNEUCHI, Fumito; SHIBATA, Tsuyoshi; TABUSE, Hideaki; MUNETOMO, Eiji; CHONAN, Sumi; (140 pag.)EP3173408; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Interesting scientific research on 3,5-Dibromo-1H-1,2,4-triazole

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference of 7411-23-6, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

First, 43.7 g of 3,5-dibromo-1H-1,2,4-triazole is introduced into 200 mL of tetrahydrofuran (THF), the resultant mixture is agitated, and 40.4 g of 2-chloro-2,4-difluoroacetophenone is further introduced thereto. Next, 36.3g of potassium carbonate is introduced to the reaction mixture and the resultant mixture is agitated for 7 hours at room temperature. After the completion of the reaction, the reaction mixture is filtered, washed with 100 mL of tetrahydrofuran (THF), andconcentrated at room temperature. Then, 437 mL of purified water is introduced so that the crystals are slurried, followed by filtering. The filtered crystals are reslurried in 175 mL of isopropanol and filtered again. The crystals are washed with 44 mL of isopropanol and dried with hot air at 50C to obtain 63.8 g of the title compound as a white solid (yield 87%, purity 99.2%, HPLC, detected at a wavelength of 256 nm, 18C 4.6 X 250 mm, mobile phase 60% ACN, flow rate 1 mL/min). [96] 1H-NMR (200MHz, CDCl3) delta (ppm) : 8.11~8.03(1H), 7.11-6.96(2H), 5.51(2H).

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; DONGKOOK PHARMACEUTICAL CO., LTD.; KWON, Hyuk Chul; RHO, Man Dong; CHA, Kyung Hoi; WO2011/96697; (2011); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Simple exploration of 103755-58-4

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol.

Electric Literature of 103755-58-4, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 103755-58-4, name is (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Phosphorus(III) bromide, 9.7 mL (0.05 mol), was added with vigorous stirring to a solution of 8.75 g (0.05 mol) of (1-phenyl-1H-1,2,3-triazol-4-yl)metha-nol (11) in 200 mL of anhydrous benzene. The mixture was heated for 2 h and cooled, 50 g of crushed ice was added, and the mixture was neutralized with a saturat-ed solution of sodium carbonate. The organic layer was separated and washed with a saturated solution of sodium carbonate, and the solvent was evaporated under reduced pressure. Yield 10.0 g (84%), mp 124-126C. 1 H NMR spectrum (500 MHz, DMSO-d 6 ), delta, ppm: 4.84 s (2H, CH 2 ), 7.52 t (1H, p-H, J = 7.2 Hz), 7.62 t (2H, m-H, J = 7.2 Hz), 8.92 s (1H, 5-H), 7.91 d (2H o-H, J = 7.2 Hz). Mass spectrum, m/z (I rel , %): 238 (100), 240 (97) [M + H] + . Found, %: C 45.23; H 3.30; N 17.62. C 9 H 8 BrN 3 . Calculated, %: C 45.40; H 3.39; N 17.65.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about (1-Phenyl-1H-1,2,3-triazol-4-yl)methanol.

Reference:
Article; Pokhodylo; Tupychak; Shyyka, O. Ya.; Obushak; Russian Journal of Organic Chemistry; vol. 55; 9; (2019); p. 1310 – 1321; Zh. Org. Khim.; vol. 55; 9; (2019); p. 1393 – 1405,13;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Never Underestimate The Influence Of C2H3N3

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1H-1,2,4-Triazole

To a solution of 1,2,4-triazole, 1 (27.6 g, 399.6 mmol) in dichloromethane (80 mL) was simultaneously added bromine in dichloromethane (50%v/v, 80 mL) and an aqueous solution of sodium hydroxide (50% w/v,96 mL). The rate of addition was such that the temperature of the reaction mass was maintained between 10-15C. After the complete addition, the temperature was raised to 25C and the stirring was continued for an additional 12 h. Into this was then added 6 N aq.HCl and stirring continued for 1 h.The solid thus precipitated was filtered, and dried under vacuum at 50C to afford 2 as an off-white solid(80 g, 90%). The product was used without further purification.

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazole help many people in the next few years.

Reference:
Article; Roy, Bhairab Nath; Singh, Girij Pal; George, Shaji K.; Lathi, Piyush S.; Agrawal, Manoj K.; Trivedi, Anurag; Mishra, Madhan; Singh, Gajendra; Indian Journal of Chemistry – Section B Organic and Medicinal Chemistry; vol. 53; 5; (2014); p. 610 – 618;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Discover the magic of the 40253-47-2

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate, in my other articles.

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 40253-47-2, name is Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate

To a mixture of ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate (200 mg, 1.29 mmol) in THE (5 mL) was added LiAIH4 (245 mg, 6.45 mmol) at 0C under N2. The mixture was stirred at 30C for 1 hour. The mixture was filtrated and washed with methanol, concentrated in vacuo to give(5-methyl-1H-1,2,4-triazol-3-yl)methanol (350 mg).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate, in my other articles.

Reference:
Patent; H. LUNDBECK A/S; KEHLER, Jan; JUHL, Karsten; MARIGO, Mauro; VITAL, Paulo, Jorge, Vieira; JESSING, Mikkel; LANGGARD, Morten; RASMUSSEN, Lars, Kyhn; CLEMENTSON, Carl, Martin, Sebastian; (278 pag.)WO2019/115567; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Now Is The Time For You To Know The Truth About 74205-82-6

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1H-1,2,4-Triazol-1-yl)methanol, hurry up and to see.

Electric Literature of 74205-82-6, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 74205-82-6, name is (1H-1,2,4-Triazol-1-yl)methanol, molecular formula is C3H5N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 2–Preparation of 1-(chloromethyl)-1,2,4-triazole hydrochloride A 4 neck 1 liter flask equipped with condenser, addition funnel and mechanical stirrer was charged 45 gms of 1-(hydroxymethyl)-1,2,4-triazole (0.464 mole) in 500 ml of THF was heating to 40 C. with vigorous stirring. Then SOCl2 (61 ml, 0.84 mole) was added dropwise maintaining the temperature at 45 C. During the addition, a precipitate formed and the mixture was stirred for an additional 2 hours. The product was filtered, washed three times with ethyl acetate and vacuum dried at room temperature. 67.3 gms of product having a melting point of 118-130 C. resulted (94.2% yield).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about (1H-1,2,4-Triazol-1-yl)methanol, hurry up and to see.

Reference:
Patent; Rohm and Haas Company; US5087635; (1992); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Brief introduction of 61-82-5

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazol-5-amine help many people in the next few years.

Electric Literature of 61-82-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 61-82-5, name is 1H-1,2,4-Triazol-5-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

I am very proud of our efforts over the past few months and hope to 1H-1,2,4-Triazol-5-amine help many people in the next few years.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Why Are Children Getting Addicted To 151899-62-6

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 151899-62-6.

Application of 151899-62-6, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 151899-62-6, name is 3-Iodo-1-trityl-1H-1,2,4-triazole, molecular formula is C21H16IN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Nitrogen gas was bubbled through a solution of (15)-3-[(25r,3lambda)-2-(4-{4- (acetyloxy)-3 – [(acetyloxy)methyl] -3 -hydroxybut- 1 -yn- 1 -yl } phenyl)- 1 -(4-ethynylphenyl)-4- oxoazetidin-3-yl]-l-(4-fluorophenyl)propyl acetate (4.Og, 6.3mmol; intermediate step B), 3-iodo- l-trityl-lH-l,2,4-triazole (i-8) (5.47g, 12.5mmol), triethylamine (4.4mL, 31.3mmol), and tetra-n- butylammonium iodide (2.3 Ig, 6.3mmol) in anhydrous DMF (5mL) and was heated at 5O0C for 20 minutes. Pd(PPh3)4 (0.72g, 0.63mmol) and CuI (0.2g, 1.25mmol) were added and the reaction mixture was heated at 5O0C under nitrogen atmosphere for ~18hr. The reaction mixture was cooled to RT, poured into water (70OmL) and extracted with EtOAc (3x200mL). The combined organic layers were washed with water (2x500mL), brine (20OmL) dried over Na2SO4,10 filtered and the solvent removed under vacuum. The residue was purified by column chromatography eluting with 0%EtOAc/hexanes then gradient from 0%EtOAc/hexanes to 50%EtOAc/hexanes then 50% EtOAc/hexanes to 60% EtOAc/hexanes then 60% EtOAc/hexanes to afford the title compound. 1HNMR (500 MHz, CDCl3) delta: 8.03 (s, IH), 7.45 (d, J = 8.0, 2H), 7.44 (d, J = 8.7, 2H), 7.36 (m, 9H), 7.29 (m, 4H), 7.19 (d, J – 8.7, 2H), 7.15 (m, 6H), 7.04 (t, J =15 8.4, 2H), 5.71 (t, J – 6.6, IH), 4.63 (d, J = 2.3, IH), 4.39 (d, J = 11.5, 2H), 4.32 (d, J = 11.5, 2H), 3.36 (s, IH), 3.08 (m, IH), 2.15 (s, 6H), 2.07 (s, 3H), 2.07-2.02 (m, 2H), 1.93-1.85 (m, 2H).

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 151899-62-6.

Reference:
Patent; MERCK & CO., INC.; WO2008/57336; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics