Category: Triazoles

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 135302-13-5, name is 3-Methoxy-4-methyl-1H-1,2,4-triazol-5(4H)-one belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C4H7N3O2

EXAMPLE 1 STR24 A mixture of 1.3 g (0.01 mol) of 5-methoxy-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-one, 0.1 g of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), 1.0 g (0.01 mol) of tertbutyl isocyanate and 50 ml of acetonitrile is stirred for 12 hours at 20 C. and subsequently concentrated under a water pump vacuum. The residue is taken up in methylene chloride, and the mixture is washed with water, dried with magnesium sulphate and filtered. The filtrate is concentrated under a water pump vacuum, the residue is brought to crystallisation by trituration with petroleum ether, and the product is isolated by filtration with suction. 1.4 g (61% Of theory) of 2-tert-butyl-amino-carbonyl-5-methoxy-4-methyl-2,4-dihydro-3H-1,2,4-triazol-3-one of melting point 167 C. are obtained.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 135302-13-5.

Reference:
Patent; Bayer Aktiengesellschaft; US5356865; (1994); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C4H5N3O2

EXAMPLE 1 A mixture of methyl 1,2,4-triazole-3-carboxylate (26.4 g, 0.21 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (60.2 g, 0.19 mole) was melted and then 1.1 g of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for 6 hours, while maintaining the temperature of the reaction mixture at 85+-5° C. And then, the reaction mixture was crystallized with 300.8 ml of methanol to give 57.9 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 78.9percent). NMR (CDCl3) delta (ppm): 2.12(t, 9H), 3.99(s, 3H), 4.25(m, 1H), 4.48(m, 2H), 5.57(t, 1H), 5.76(q, 1H), 6.07(d, 1H), 8.44(s, 1H)

If you are hungry for even more, make sure to check my other article about 4928-88-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of Sodium 1,2,4-triazol-1-ide

A mixture of 2,3-difluorobenzylnitrile (2.27 g, 16.3 mmol) and triazole sodium salt (1.33 g, 14.8 mmol) in tetrahydrofuran (5 mL) and dimethylformamide (10 mL) was stirred at 85 C. for 4 h. After concentration, the residue was purified by flash chromatography (SiO2) eluting with 25%-50% ethyl acetate/hexane. The isolated product was recrystallized from hot ethyl acetate/hexane to give the title compound as white needles (1.51 g, 54% yield). 1H-NMR (500 MHz, CDCl3) ? ppm: 8.50 (1H, d, J=2.4 Hz), 8.25 (1H, s), 7.69-7.67 (1H, m), 7.60-7.57 (2H, m). LCMS [M+H]+ calcd for C9H6N4F: 189.16; found: 189.14.

If you are hungry for even more, make sure to check my other article about 41253-21-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Naidu, B. Narasimhulu; Banville, Jacques; Beaulieu, Francis; Connolly, Timothy P.; Krystal, Mark R.; Matiskella, John D.; Ouellet, Carl; Plamondon, Serge; Remillard, Roger; Sorenson, Margaret E.; Ueda, Yasutsugu; Walker, Michael A.; US2005/267105; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 202931-88-2, name is 1-Methyl-1H-1,2,3-triazole-5-carbaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C4H5N3O

A solution of n-butyllithium in hexanes (1.6 M, 0.71 mE, 1.1 mmol) was added dropwise to a stirring solution of 3-(4-(i R-pyrazol- 1 -yl)benzyl)-6-bromo-4-chloro-2-meth- oxyquinoline (490 mg, 1.1 mmol, Intermediate 4: step d) in tetrahydrofuran (ii mE) at -78C. Afier 2 minutes, a solution of i-methyl-i R-i ,2,3-triazole-5-carbaldehyde (140 mg, 1.1 mmol, Intermediate 18) in tetrahydrofuran (1 mE) was added dropwise. After 5 minutes, the flask was placed into an ice- water bath. Afier 1 hour, water (10 mE) and ethyl acetate (60 mE) were added. The biphasic mixture was stirred for 10 minutes. Ralf-saturated aqueous sodium chloride solution (50 mE) was added and the layers were separated. The organic layer was dried with sodium sulfate and the dried solution was filtered. Silica gel (4 g) was added to the filtrate and the mixture was concentrated by rotary evaporation to afford a free-flowing powder. The powder was loaded onto a silica gel column for flash column chromatography purification. Elution with 100% hexanes initially, grading to 100% ethyl acetate provided the title compound as a white foamwhich was impure. The foam was suspended in methanol (20 mE) and the suspension was sonicated for 5 minutes. The solids were collected by filtration and rinsed with methanol (5 mE). The collected solids were dried to provide the title compound as a white solid. ?H NMR (600 MHz, DMSO-d5) oeppm 8.42 (d, J=2.5 Hz, 1H), 8.21 (d, J=i.8 Hz, 1H), 7.86 (d, J=8.6 Hz, 1H), 7.75-7.71 (m, 2H), 7.72-7.67 (m, 2H), 7.37- 7.32 (m, 3H), 6.55 (d, J=5.2 Hz, 1H), 6.53-6.49 (m, 1H), 6.22 (d, J=5.2 Hz, 1H), 4.30 (s, 2H), 4.04 (s, 3H), 3.97 (s, 3H); MS (ESI): mass calcd. for C24H2,C1N602, 460.1; mlz found, 461.1 [M+H].

If you are hungry for even more, make sure to check my other article about 202931-88-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; US2015/105372; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 81606-79-3, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 81606-79-3, name is 2-(1,2,4-Triazol-1-yl)acetonitrile, molecular formula is C4H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 1To a 50 ml three necked round bottom flask, 4-(7-pivaloyl-5-((2-(trimethylsilyl)ethoxy)- methyl)-5H-pyrrolo[2,3-b]pyrazine-2-ylamino)benzaldehyde (O.lg, 0.22 mmole) and 2-(lH- l,2,4-triazol-l-yl)acetonitrile(0.0716g, 0.66 mmole) was taken in ethanol (5 mL). To this reaction mixture, piperidine (0.2 mL) was added drop wise at RT. After completion of the addition, the reaction mass was refluxed for 16 hrs and the completion of the reaction was monitored on TLC using ethyl acetate: hexane (5:5) as a mobile phase. After completion of the reaction, ethanol was distilled out and water was added to residue. Aqeous was extracted with ethyl acetate, organic layers were combined, dried over Na2S04, filtered and concentrated to afford crude product. The crude compound was purified using column purification by eluting the compound with 40% ethyl acetate in hexanes triturated with n-pentane, pentane layer was decanted and solid was dried under vacuum to yield 0.052 g of 3-(4-(7-pivaloyl-5-((2- (trimethylsilyl)ethoxy)methyl)-5H-pyrrolo[2,3-b]pyrazin-2-ylamino)phenyl)-2-(lH-l,2,4-triazol- 1 -yl)acrylonitrile.

I am very proud of our efforts over the past few months and hope to 2-(1,2,4-Triazol-1-yl)acetonitrile help many people in the next few years.

Reference:
Patent; PRINCIPIA BIOPHARMA INC.; GOLDSTEIN, David Michael; BRAMELD, Kenneth Albert; VERNER, Erik; WO2012/158785; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 956317-36-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 956317-36-5, name is 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: TEA (1.20 mL, 8.63 mmol) was added to a solution of N-ethyl-2[3-(5-fluoro-pyridin-2-yl)-1H-pyrazol-l-yl] ethanamine dihydrochloride(0.50 g, 1.63 mmol) in CHC13 (5 mL) at room temperature.5-methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid (0.36 g, 1.79 mmol)and propylphosphonic acid anhydride (cyclic trimer) (50% solutionin DMF [approximately 1.6 mol/L], 1.32 mL, 2.12 mmol) wereadded to the reaction solution under cooling in ice water. Theresultant mixture was stirred at 50 C for 5 h. After standing untilcooled to room temperature, water was added thereto, followedby extraction with CHCl3. The organic layer was washed with brine.Then, the organic layer was dried over MgSO4 and the desiccantwas filtered off. Then, the solvent was distilled off under reducedpressure. The obtained residue was purified by column chromatography(20-80% EtOAc in hexanes) and washed with Et2O to yieldthe title compound 4a as a colorless powder (0.51 g, 75%).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 5-Methyl-2-(2H-1,2,3-triazol-2-yl)benzoic acid.

Reference:
Article; Suzuki, Ryo; Nozawa, Dai; Futamura, Aya; Nishikawa-Shimono, Rie; Abe, Masahito; Hattori, Nobutaka; Ohta, Hiroshi; Araki, Yuko; Kambe, Daiji; Ohmichi, Mari; Tokura, Seiken; Aoki, Takeshi; Ohtake, Norikazu; Kawamoto, Hiroshi; Bioorganic and Medicinal Chemistry; vol. 23; 6; (2015); p. 1260 – 1275;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

in a polar solvent,DMF, 9,10-dibromoanthracene, triazole, potassium carbonate and copper oxide inthe preparation of the organic compound under heating; 9,10-dibromoanthracenewherein: three azole: potassium carbonate: copper oxide molar ratio of 2: 10:30: 1; The reaction temperature is1500 C, the reaction time of 18 hours

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Tianjin Normal University; WANG, YING; (12 pag.)CN104497023; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 6523-49-5, name is 4-(1,2,4-Triazol-1-yl)aniline belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 6523-49-5

The formamidine from Step 1 (100 mg) and 4-triazolylaniline (73 mg) in AcOH(3 ml) were heated at 125 for 3 h. The cooled reaction mixture was concentrated and purified by column chromatography on silica gel with DCM:MeOH (2.5 %) as eluant. This gave the product (54 mg).1H NMR delta 10.14 (IH, s), 9.28 (IH, s), 8.87 (IH, s), 8.62 (IH, s), 8.25 (2H, m),8.06 (2H, m), 7.9 (4H, m), 7.16 (IH, m), 6.73 (IH, m); LC-MS rt 2.25 m/z 353 ES-.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4-(1,2,4-Triazol-1-yl)aniline, in my other articles.

Reference:
Patent; ARROW THERAPEUTICS LIMITED; WO2007/80401; (2007); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 252742-72-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 252742-72-6, name is 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one, molecular formula is C3H4ClN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a mixed solution of the compound (0.15 g) obtained in Example 1 and potassium carbonate (0.047 g) in DMF (2 ml) and water (0.02 ml), 5-(chloromethyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (0.046 g) synthesized by the method described in the document (e.g., Tetrahedron Letters, Vol. 41, pages 8661-8664) was added at 0°C, and the reaction mixture was stirred at 0°C for 3 hours. The reaction mixture was poured into water, and then the product was extracted with ethyl acetate. The organic layer was washed with saturated brine, dried, and then the solvent was evaporated under reduced pressure. The obtained residue was isolated and purified by silica gel column chromatography (ethyl acetate : methanol = 20 : 1) to obtain the title compound as colorless crystals (0.050 g, 29percent). Melting point: 89 – 91°C (recrystallized from ethyl acetate – IPE).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3-(Chloromethyl)-1H-1,2,4-triazol-5(4H)-one.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP1553084; (2005); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The 2 H – 1, 2, 3 – triazole (3.45 g, 50 mmol), 2 – iodo -5 – methyl benzoic acid (5.24 g, 20 mmol), cesium carbonate (11.72 g, 36 mmol), trans – N, N’ – dimethyl – 1, 2 – diaminocyclohexane (0.51 g, 3.6 mmol), cuprous iodide (0.38 g, 2 mmol) and N, N – dimethyl formamide (30 ml) are added to the 100 ml round bottom flask in a single port, under the protection of nitrogen reaction solution gradually raising the temperature to 100 C reaction 4 hours. Stopping the reaction, cooling, liquid water (60 ml) diluted with water and ethyl acetate (200 ml × 2) extraction. The water layer is acidified to pH concentrated hydrochloric acid for 1 – 2, then adding ethyl acetate (200 ml × 2) extraction, the resulting organic layer dried with anhydrous sodium sulfate, filtered, filtrate turns on lathe does after separation and purification by column chromatography (dichloromethane/methanol (v/v)=50/1) to obtain the title compound (yellow solid, 2.76 g, 68%).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,3-Triazole.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Zhang Yingjun; Xue Yaping; Lao Jinhua; Nie Biao; Xu Juan; (35 pag.)CN107759620; (2018); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics