Category: Triazoles

Electric Literature of 1186050-58-7, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1186050-58-7, name is 2-Fluoro-6-(2H-1,2,3-triazol-2-yl)benzoic acid, molecular formula is C9H6FN3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Dissolve 2-fluoro-6- (2H- 1,2,3 -triazol-2-yl) benzoic acid (0.69 g, 3.33 mmol) with anhydrous dichloromethaneThionyl chloride (8 mL, 109.0 mmol) and DMF (0.04 mL, 0.5 mmol) were slowly added and the reaction was gradually warmed to reflux for 3 hours. The reaction was stopped, cooled and the solvent was slowly evaporated under reduced pressure. The resulting product was used directly in the next step.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 1186050-58-7, Happy reading!

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jin Chuanfei; Xu Juan; Zhong Wenhe; Zhang Yingjun; Liu Qi; (35 pag.)CN105949203; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

The 1, 2, 3-triazole (3.45g, 50mmol), 2-iodo-5-methyl benzoic acid (5.24g, 20mmol), cesium carbonate (11.72g, 36mmol), trans-N, N ‘-dimethyl -1 , 2-cyclohexanediamine (0.51g, 3. 6mmol), cuprous iodide (0.38g, 2mmol) and N, N-dimethyl formamide (30 ml) are sequentially added to the 100 ml round bottom flask in a single port, the resulting reaction mixture under the protection of nitrogen is gradually heated up to 100 C, reaction 4 hours. Stop the reaction, cooling to room temperature to be reacted, water (150 ml) is diluted, and using ethyl acetate (200 ml × 2) extraction . Remove organic layer, the aqueous layer with concentrated hydrochloric acid (the mass fraction is 36.5%) acidified to pH to 1-2, then using ethyl acetate (200 ml × 2) extraction, and combined with the organic layer dried with anhydrous sodium sulfate. Filtering, the filtrate concentrated under reduced pressure, the resulting residue is purified by silica gel column chromatography (dichloromethane / methanol (v / v) = 50/1) to obtain the title compound as yellow solid (2.76g, 68%) .

I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; Guangdong East Sunshine Pharmaceutical Co., Ltd.; Jinchuan, Fei; Gao, Heng; Zhang, Ji; Zhang, Yingjun; (84 pag.)CN105461699; (2016); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 4,5-Dibromo-2H-1,2,3-triazole

Step 1 : A mixture of A-24.1 (2.00 g, 1 1 .0 mmol), A-24.2 (3.80 g, 17.0 mmol), Cul (0.13 g, 0.68 mmol), A-24.3 (0.14 mL, 1 .00 mmol) and K2C03 (2.30 g, 17.0 mmol) in dry DMF (10 mL) is heated to 120°C by microwave irradiation and stirred for 40 min. The mixture is poured into water and extracted with Et20. The aq. phase is acidified with HCI (4N aq. solution) and extracted with EA. The combined organic phases are dried and concentrated to give the crude product which is purified by flash column chromatography on silica gel (using a solvent gradient from 100percent EA to EA/MeOH = 9/1 ) to provide 3.6 g of A-24.4. APCI+/-: 365 [M+H]+; HPLC (Rt): 1 .10 min (Method N).

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 22300-52-3, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; RIETHER, Doris; FERRARA, Marco; HEINE, Niklas; LESSEL, Uta; NICHOLSON, Janet Rachel; PEKCEC, Anton; (102 pag.)WO2017/178344; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 1H-1,2,4-Triazol-5-amine

A mixture of aldehyde (1 mmol), dimedone (1 mmol), 3-amino-1,2,4-triazole (1 mmol), and [C4(H-DABCO)2][HSO4]4 (16 mg) washeated in an oil bath (90 C) under solvent-free conditions. Aftercompletion of the reaction, as identified by TLC, using n-hexane:EtOAc (7:3) as the eluent, 10 mL of water was added and stirredfor 10 min. The catalyst was dissolved in water and the solid wasfiltered off and washed with warm EtOH, to obtain the pure targetmolecule.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazol-5-amine, in my other articles.

Reference:
Article; Safari, Niloufar; Shirini, Farhad; Tajik, Hassan; Journal of Molecular Structure; vol. 1201; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Formula: C3H6N4

(2S,3S)-2-(Fluoromethyl)-7-(methylcarbamoyl)-3-phenyl-2,3-d ihyd robenzofuran-5-carboxylic acid (80 mg, 0.24 minol) and HATU (111 mg, 0.292 minol) were dissolved in DMSO (0.85 mL), andthe resulting solution was treated with DIPEA (0.127 mL, 0.729 minol) and the reaction minxture wasleft to stir at rt for 5 min 1-Methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added andthe reaction was left to stir for 1 h at rt. Further HATU (111 mg, 0.292 minol) and DIPEA (0.127 mL,0.729 minol) were added and the reaction minxture was left to stir for 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added and reaction minxture stirred for 2 h at rt. FurtherHATU (111 mg, 0.292 minol) and DIPEA (0.127 mL, 0.729 minol) were added and the reaction minxturewas left to stir for 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was addedand reaction minxture stirred for 2 h at rt and was then left to stand overnight. HATU (111 mg, 0.292minol) and DIPEA (0.127 mL, 0.729 minol) were again added and the reaction minxture was left to stirfor 5 min then 1-methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) was added and reaction minxture stirred for 3 h then left to stand over the weekend. The reaction minxture had separated and become solid and not all of the reactants seemed to have gone into solution therefore further DMSO (1 mL) was added to the reaction minxture and it was left to stir at rt for 3 h. 1-Methyl-1H-1,2,4-triazol- 3-amine (23.8 mg, 0.243 minol) was added and the reaction minxture was left to stir at rt for 1 h thenleft to stand overnight. Further HATU (iii mg, 0.292 minol), DIPEA (0.127 mL, 0.729 minol) and 1- methyl-1H-1,2,4-triazol-3-amine (23.8 mg, 0.243 minol) were added and the reaction left to stir at rt for 1 h. Further HATU (iii mg, 0.292 minol), DIPEA (0.127 mL, 0.729 minol) and 1-methyl-1H-1,2,4- triazol-3-amine (23.8 mg, 0.243 minol) were added and the reaction left to stir at rt for 1 h. The reaction minxture was then purified by MDAP (method high pH) to give (2S,3S)-2-(fluoromethyl)-N7-methyl-N5-( 1-methyl-i H-1,2,4-triazol-3-yl)-3-phenyl-2,3-d ihydrobenzofuran-5,7-dicarboxaminde (24.8 mg 25percent) as a white solid.LCMS (method forminc): Retention time 0.79 min [M+H] = 410

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 49607-51-4

Reference:
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ATKINSON, Stephen, John; DEMONT, Emmanuel, Hubert; HARRISON, Lee, Andrew; PRESTON, Alexander, G.; SEAL, Jonathan, Thomas; WALL, Ian, David; WATSON, Robert, J.; WOOLVEN, James, Michael; (214 pag.)WO2017/174620; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 217448-86-7, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 217448-86-7, name is Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, molecular formula is C11H9F2N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Example 4 Preparation of Rufinamide (I). Mixture of 10 g (0.039 mol) of methyl-1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate, and 150 ml of methanolic ammonia solution was stirred at ambient temperature. The reaction mixture was heated to 45 C. for 22 hours. Cooled to ambient temperature. Solid was filtered, washed with methanol and dried under reduced pressure. Yield 69 g (87%); HPLC purity: 99.83%.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about Methyl 1-(2,6-difluorobenzyl)-1H-1,2,3-triazole-4-carboxylate.

Reference:
Patent; LUPIN LIMITED; Siyan, Rajinder Singh; Aher, Yogesh Subhas; Bhise, Nandu Baban; Singh, Girij Pal; Gohel, Sunilkumar Vinubhai; US2014/357871; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1-Methyl-1H-1,2,3-triazole

To a flask containing 1-methyl-1H-1,2,3-triazole (200 mg, 2.41 mmol, prepared according to PCT Int. Appl., 2008098104) was added THF (20 mL) and the colorless solution was cooled to -40 C. Then, n-BuLi (2.5 M in hexanes, 1.0 mL, 2.5 mmol) was added drop wise which afforded a dark reddish-brown viscous solution. The mixture was stirred at -30 C. for 35 minutes, then a homogeneous THF solution of (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,4-dimethyloxazol-5-yl)methanone (500 mg, 1.05 mmol, in 4 mL THF, Intermediate 51: step b) was introduced at -20 C. The reaction mixture became a dark brown color and was then placed in an ice-water bath and allowed to warm gradually to room temperature. After 45 minutes, the mixture was quenched with aqueous NH4Cl solution and extracted with EtOAc:THF (10:2), 4*50 mL. The combined organics were washed with brine, dried over Na2SO4, filtered and concentrated to provide a brown oil. Chromatography on silica gel (3% MeOH-DCM increasing to 5% MeOH-DCM) to provide the title compound as a faint amber solid. MS m/e 558.2 [M+H]+. 1H NMR (400 MHz, CDCl3) delta ppm 8.15 (d, J=2.0 Hz, 1H), 7.86 (d, J=8.8 Hz, 1H), 7.54-7.47 (m, 3H), 7.40 (d, J=8.1 Hz, 2H), 7.14 (s, 1H), 4.35 (s, 2H), 4.10 (s, 3H), 4.03 (s, 1H), 3.92 (s, 3H), 2.40 (s, 3H), 1.54 (s, 3H).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1-Methyl-1H-1,2,3-triazole, in my other articles.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

2-iodobenzoic acid (1 g, 4.03 mmol), 2H-l,2,3-triazole (0.334 g, 4.84 mmol), copper(I) iodide (0.768 g, 4.03 mmol), cesium carbonate (2.63 g, 8.06 mmol) were reacted in DMF at 120 C under microwave irradiation for 20 minutes. Then the reaction was monitored confirming the presence of the required product. Large amount of starting material resulted left. The reaction was further irradiated for 20 minutes at 120 C. Solvent was then removed under vacuum, poured into water (100 ml) and neutralised with 37% HC1. Aqueous phase was extracted with Et20 (3×100 ml), and the collected organic phases were concentrated to give 1 g of crude material. This was purified with Biotage SP1 (over a 340g C18 column) eluting with a gradient of ACN and water (modified with 0.5% HCOOH). Fractions were collected and concentrated under vacuum to give the title compound D43 as colourless solid (140 mg). UPLC (GEN QC Basic): rt = 0.29 minutes, peak observed: 188 (M-l) C9H7N302 requires: 189. 1H NMR (400 MHz, CHLOROFORM-d) delta ppm 6.47 (br. s., 1 H) 7.47 – 7.59 (m, 1 H) 7.66 (t, 1 H) 7.75 – 7.87 (m, 3 H) 7.91 (d, 1 H)

If you are hungry for even more, make sure to check my other article about 288-36-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLAXO GROUP LIMITED; DI FABIO, Romano; WO2012/89606; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

2-(2H-1.2,3-triazol-2-yl>5-methylbenzoic acid (A-3)A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 1200C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO^ filtered and concentrated. The residue was purified by gradient elution on Sitheta2 (0 to 10% MeOH in water with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-3, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. Data for A-3 : 1HNMR (500 MHz, DMSO-d6) d 12.98 (br s , IH), 8.04 (s, 2H), 7.72-7.45 (m, 3H), 2.41 (s, 3H) ppm.

In the meantime we’ve collected together some recent articles in this area about 288-36-8 to whet your appetite. Happy reading!

Reference:
Patent; MERCK & CO., INC.; WO2008/8518; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7170-01-6, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step A Synthesis of 8-methoxy-2-methyl-4-(5-methyl-l//-l,2,4-triazol-l-yl)quinoline and 8- methoxy-2-methyl-4-(3 -methyl- H- 1 ,2,4-triazol- 1 -yl)quinoline4-chloro-8-methoxy-2- methylquinoline (100 mg, 0.481 mmol) was reacted with 3-methyl- IH-l, 2,· 4-triazole (46.0, 0.554 mmol) according to the synthesis of 4-(4-fluoro- 1 /Y-pyrazol- 1 -yl)-8-mcthoxy-2-mcthylquinolinc to give a mixture of the title compounds. MS (m/z): 255.3 [M+H+] Step B Synthesis of 2-methyl-4-(3-methyl-l//-l,2,4-triazol-l-yl)quinolin-8-ol and 2-methyl- 4-(5-methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-ol (0284) A mixture of 8-mcthoxy-2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc and 8- mcthoxy-2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolinc (153 mg, 0.602 mmol) was demethylated according to the synthesis of 4-(4-fluoro-l//-pyrazol-l-yl)-2-methylquinolin-8-ol to give a mixture of the title compounds. MS (m/z): 241.1 [M+H+] Step C. Synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((2-methyl-4-(5-methyl-l//-l,2,4-triazol-l- yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (0286) A mixture of 2-mcthyl-4-(3-mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol and 2-methyl-4-(5- mcthyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinol in-8-ol (48.3 mg, 0.201 mmol) was reacted with (5)-2-(l-(3- chloro-2-(chloromethyl)-5-fluorophenyl)ethyl)isoindoline-l,3-dione (70.7 mg, 0.201 mmol) according to the synthesis of (5)-2-(l-(3-chloro-5-fluoro-2-((4-(4-fluoro-l/7-pyrazol-l-yl)-2- methylquinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline-l,3-dione to give a mixture of the title compounds. MS (m/z): 556.4 [M+H+] Step D. Synthesis of (5′)- 1 -(3-chloro-5-fluoro-2-((2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 – yl)quinolin-8-yloxy)methyl)phenyl)ethanamine and (5)- 1 -(3-chloro-5-fluoro-2-((2-methyl-4-(3- methyl- H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethanamine (0287) A mixture of (S)-2-( 1 -(3-chloro-5-fluoro-2-((2-mcthyl-4-(5-mcthyl- 1 H- 1 ,2,4-triazol- 1 – yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- 1 ,3-dione and (5)-2-(l -(3-chloro-5-fluoro-2- ((2-methyl-4-(3 -methyl- 1 H- 1 ,2,4-triazol- 1 -yl)quinolin-8-yloxy)methyl)phenyl)ethyl)isoindoline- l,3-dione (111 mg, 201 miho) was deprotected according to the synthesis of (5)-l-(3-chloro-5- fluoro-2-((4-(4-fluoro- l/ -pyrazol- 1 -yl)-2-methylquinolin-8-yloxy)methyl)phenyl)ethanamine to give the title compounds. MS (m/z): 448.3 [M+Na+]

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3-Methyl-1H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; PHARVARIS B.V.; GIBSON, Christoph; SAUPE, Joern; AMBROSI, Horst-Dieter; HAUSTEDT, Lars Ole; (99 pag.)WO2019/101906; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics