Category: Triazoles

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 16227-12-6, name is 4-Phenyl-4H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

EXAMPLE 125 4-phenyl-1-(ethyl)triazolium bromide 0.15 g (0.001 mol) 4-phenyltriazole 1 and 0.22 ml (0.32 g, 0.003 mol) 1-bromoethane 2 are combined in a pressure tube. The mixture is stirred 12 h at 110 C. Subsequently, it is cooled down to room temperature. The precipitated solid is taken up in a 1:1 mixture of THF and petroleum ether, is filtered off, and washed with diethylether. M 254.13 C10H12N3Br Yield: 0.2307 g (97%) 1H-NMR DM-226 (300 MHz/DMSO): (ppm)=1.57 (t, 3H, 8-H); 4.49 (q, 2H, 7-H); 7.71 (m, 3H, 5/5’/6H); 7.87 (d, 2H, 4/4′-H); 9.82, (s, 1H, 2-H); 10.88 (s, 1H, 1-H) 13C-NMR DM-226 (75.475 MHz/DMSO):

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 4-Phenyl-4H-1,2,4-triazole, in my other articles.

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 288-88-0, name is 1H-1,2,4-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-88-0

A flask was charged with K2CO3 (12.1689 g, 88 mmol), 1H-1,2,4-triazole (2.0042 g, 29 mmol), Cu2O(430 mg, 3 mmol) and 1,10-phenanthroline (1.0452 g, 5.8 mmol) and then evacuated and back-filled with N2. Then, anhydrous DMF (20 ml) and iodobenzene (8.9764 g, 4.92 ml, 44 mmol) were added and the resulting mixture was heated to 120 C for 64 h and then diluted with CH2Cl2 (40 ml). The mixture was filtered through a pad of Celite and the residue washed with CH2Cl2 (20 ml). The resulting organic layer was washed with water (20 ml) and brine (20 ml), dried over MgSO4 and concentrated under reduced pressure. The crude mixture was purified by column chromatography (cyclohexane/ethyl acetate 8/0?2/0) to yield the product as a pale yellow solid (2.986 g, 71%).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 1H-1,2,4-Triazole, in my other articles.

Reference:
Article; Paul, Susann; Schweizer, W. Bernd; Rugg, Graham; Senn, Hans Martin; Gilmour, Ryan; Tetrahedron; vol. 69; 27-28; (2013); p. 5647 – 5659;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 7411-23-6, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 3,5-Dibromo-1,2,4-triazole (1; 658 mg, 2.9 mmol) or 3-chloro-1,2,4-triazole (300 mg, 2.9 mmol), o-quinone methide precursor 2 (2.9mmol), and K2CO3 (1.2 g, 8.7 mmol) were refluxed for 4 h in DMF (10mL). After completion of the reaction, the mixture was cooled, andpoured into H2O (30 mL). The precipitate formed was collected by filtration,washed with H2O, dried, and recrystallized.

This is the end of this tutorial post, and I hope it has helped your research about 7411-23-6!

Reference:
Article; Osipov, Dmitry V.; Osyanin, Vitaly A.; Voskressensky, Leonid G.; Klimochkin, Yuri N.; Synthesis; vol. 49; 10; (2017); p. 2286 – 2296;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 13423-60-4, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 13423-60-4, name is 1-Phenyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 110 1-phenyl-4-(hex-1-yl)triazolium bromide 0.300 g (0.002 mol) 1-phenyltriazole 1 and 0.842 ml (0.990 g, 0.006 mol) 1-bromohexane 2 were dissolved in a pressure tube in 5 ml THF. The reaction mixture was stirred 3 d at 110 C. On account of a broken seal the solvent had evaporated was after that time. 1-bromohexane 2 and THF were added again and stirring was continued. The reaction mixture was cooled down and the same volume petroleum ether added. The precipitated solid is filtered off, washed with petroleum ether, and dried in HV. While the solvent had already evaporated the reaction seemed to run better, because this experiment provided considerably higher yields than all THF experiments. M 310.24 C14H20N3Br Yield: 0.4601 g (74%) 1H-NMR DM-107 (300 MHz/DMSO): delta (ppm)=0.88 (t, 3H, 12-H); 1.33 (m, 6H, 9/10/11H); 1.94 (q, 2H, 8-H); 4.31 (t, 2H, 7-H); 7.70 (m, 3H, 5/5’/6H); 7.96 (d, 2H, 4/4′-H); 9.51 (s, 1H, 1-H); 11.00 (s, 1H, 2-H) 13C-NMR DM-107.w (300 MHz/DMSO):

We very much hope you enjoy reading the articles and that you will join us to present your own research about 13423-60-4, Happy reading!

Reference:
Patent; TECHNISCHE UNIVERSITAET DRESDEN; US2011/105761; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 40253-47-2, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 40253-47-2, name is Ethyl 5-methyl-1H-1,2,4-triazole-3-carboxylate, molecular formula is C6H9N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

To a solution of ethyl 5-methyl-lH-l ,2,4-triazole-3-carboxylate (50 mg, 0.28 mmol) and 2-chloro-4-(chloromethyl)pyridine (50 mg, 0.31 mmol) in DMF (2 mL), K2CO3 (116 mg, 0.84mmol) was added. The mixture was stirred at RT overnight, and was then diluted with H20 (20 mL), extracted with EtOAc (3 x 20 mL), 4: 1 CHCl3: PrOH (3 x 20 mL), dried with MgS04 and concentrated under reduced pressure. The crude product was purified on a Biotage pre-packed silica gel column (EtOAc:Hexane 12percent to 100percent EtOAc) to afford ethyl l-((2- chloropyridin-4-yl)methyl)-5-methyl-lH-l ,2,4-triazole-3-carboxylate (29 mg, 40percent) as a white solid. MS(ES+) Ci2H13ClN402 requires: 280 found: 281 [M+H]+.

In the meantime we’ve collected together some recent articles in this area about 40253-47-2 to whet your appetite. Happy reading!

Reference:
Patent; JONES, Philip; DIFRANCESCO, Maria, Emilia; PETROCCHI, Alessia; CARROLL, Christopher, L.; MARSZALEK, Joe; CZAKO, Barbara; JOHNSON, Ryan; THEROFF, Jay; WO2014/31936; (2014); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 1001401-62-2

A solution of 2-(2H-1,2,3-triazol-2-yl)benzoic acid (4.3 g, 0.023 mol) in 15 mL of 50C12 was heated at 50 C for 30 mins. After cooling to RT, the mixture was concentrated in vacuo to remove the solvent. To a solution of the product from step 1 (3.3 g, 0.02 mol) and TEA (8.7 mL, 0.06 mol) in dry DCM (10 mL) at 0 C was added a solution of the above residue inDCM (10 mL) dropwise. The resulting mixture was stirred at RT overnight. The mixture was filtered and the filtrate was concentrated in vacuo. The residue was purified by silica gel column chromatography (50% EtOAc in petroleum ether) to give the title compound as an oil. LRMS m/z (M+H) 331.1 found, 331.2 required.

If you are hungry for even more, make sure to check my other article about 1001401-62-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; LIVERTON, Nigel; LUO, Yunfu; (58 pag.)WO2016/89722; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 16681-70-2, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

[0713] 3H-1,2,3-triazole-5-carboxylic acid (2.5 mg, 22f.tmol) was combined with HATU (8.4 mg, 22 fllllOl) in DMF(0.3 mL) and stirred for 10 minutes; Et3N (1 eq.) was addedand the mixture was stirred for 1 minute. Compound 2 (22f.tmol) was dissolved in DMF (0.5 mL) and Et3N (3.1 f.LL, 22f.tmol) was added, followed by addition of the activated acidsolution. The mixture was stirred for 30 minutes, concentrated,and purified by preparative HPLC to yield the titlecompound. MS m/z [M + Ht calc’ d for C27H31 ClFN 50 4 , 544.21; found 544.2.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-[1,2,3]Triazole-4-carboxylic acid.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 22300-52-3, name is 4,5-Dibromo-2H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 4,5-Dibromo-2H-1,2,3-triazole

General procedure: To a 20 ml or 40 ml viale quipped with a stir bar was added photocatalyst, nitrogen nucleophile, iodomesitylene dicarboxylate, copper salt, and ligand. Dioxane was added followed by addition of the base. The solution was sonicated for 1?3 min until it became homogeneous. Next, the solution was degassed by sparging with nitrogen for 5?10 min before sealing with Parafilm. The reaction was stirred and irradiated using two 34-W blue LED lamps (3 cm away, with cooling fan to keep the reaction at room temperature) for 1 h. The reaction mixture was removed from the light, cooled to ambient temperature, diluted with water (15 ml) and ethyl acetate (25 ml), and the aqueous layer was extracted with ethyl acetate (3 × 25 ml). The combined organic layers were washed with brine, dried over Na2SO4, filtered and concentrated. The residue was purified by flash chromatography on silica gel to afford the desired decarboxylative C?N coupling product. For aniline substrates, a solution of these nitrogen nucleophiles in dioxane was used; additionally, if the iodomesitylene dicarboxylate is a liquid, its solution in dioxane was used.

If you are hungry for even more, make sure to check my other article about 22300-52-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Liang, Yufan; Zhang, Xiaheng; MacMillan, David W. C.; Nature; vol. 559; 7712; (2018); p. 83 – 88;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

The iodide 19 (6.04 kg, 23.0 mol), THF (45 L) and DMF (9.0 L) were charged to a vessel. Copper iodide (218 g, 1.15 mol) and potassium carbonate (7.94 kg, 57.4 mol) were added and the mixture heated to an internal temperature of 40 C. 1 ,2,3-Triazole (3.16 kg, 46., 0 mol) was added as a solution in THF (6.0 L) over half an hour (no exotherm) and heating continued to 65 C (again no exotherm observed) and the reaction monitored by HPLC. Once complete Nu,Nu-dimethylethylenedi amine (244 mL, 2.30 mol) was added and mixture cooled to RT. Aqueous 3.6 M HC1 (36 L) was added (exotherm) and the mixture extracted twice with ethyl acetate (2 x 30 L). The combined organics were washed with LiCl solution (2 x 20 L). The acid solution assayed for 3.79 kg of 5 (81%) and 4.64 kg of 5 and 20 combined (99%). A solution of acids 5 and 20 (approx. 4.64 kg, 22.9 mol) in THF and EtOAc (approx. 1 10 L) was concentrated to low volume. THF (90 L) was added and the solvent composition checked by 1H NMR to ensure most ethyl acetate had been removed. Sodium tert-butoxide (2.42 kg, 25.2 mol) was added slowly as a solid over 1-2 h (slight exotherm), allowing the sodium salt to form and stirred overnight at RT. The liquors showed a 45:55 ratio of product 5: starting material 19 and the solid was collected by filtration, washed with THF (2 x 20 L) and dried in a vacuum oven (T = 40 C) for 15 h to afford 4.22 kg of crude sodium salt. The crude sodium salt (4,22 kg, 14.9 mol) was charged to a 50 L vessel and 3.6 M HC1 (21.2 L) was added with cooling. The slurry was then stirred at room temperature for 16 h and the off-white solid isolated by filtration. The cake was washed with water (11 L) and iP Ac/Heptane (2 chi 5L), then dried in a vacuum oven (T = 35 C) for 15 h to give 3.10 kg of crude acid 5 (97.9 LCAP, 92 wt%, corrected weight 2.85 kg, 61% yield from 19). The acid 5 (2.85 kg corrected, 14.0 mol) was charged to a 50 L vessel and EtOAc (28 L) and dilute 0.22 M HC1 (14 L) were added and the mixture stirred until two clear phases resulted. The aqueous layer was removed and the organic layer filtered to remove any particulate matter. The ethyl acetate was reduced to about 8 L and then heptane (15.6 L) was added over 1 h and the liquors sampled to check for appropriate losses. The solid was isolated by filtration, washed with heptane :ethyl acetate (3: 1, 4 L) and dried on the filter under nitrogen to give 2.81 kg of acid 5. m.p. 167.5 C. NMR (400 MHz, d6-DMSO): delta 12.09 (br s, 1H)S 8.04 (s, 1H), 7.62 (d, 1H, J = 8.4 Hz), 7.58 (d, 1H, J – 1.2 Hz), 7.49 (dd, 1H, J = 8.4, 1.2 Hz), 2.41 (s, 3H). 13C NMR (100.6 MHz, d6-DMSO): delta 168.0, 139.2, 136.4, 135.8, 132.5, 130.3, 128.7, 124.8, 20.9. HRMS (ESI): m/z [M+ + H] calcd for C]0H9N3O2: 204.0773; found: 204.0781

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 288-36-8.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MERCK SHARP & DOHME LIMITED; BAXTER, Carl, A.; CLEATOR, Edward; KRSKA, Shane, W.; SHEEN, Faye; STEWART, Gavin; STROTMAN, Neil; WALLACE, Debra, J.; WRIGHT, Timothy; WO2012/148553; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

Example 4 Synthesis of SC11 To a stirred solution of benzoic acid (116 mg, 0.94 mmol) in DCM (3 mL) were added compound 7 (200 mg, 0.94 mmol), TEA (0.4 mL, 2.82 mmol) and HBTU (536 mg, 1.39 mmol). The resulting mixture was stirred at r.t. overnight before quenched with sat. NaHCO3. The layers were separated and the aqueous layer was extracted with DCM (10 mL*3). The combined organic layers was dried over Na2SO4, filtered and concentrated. The residue was purified by flash chromatography (silica gel, 0?50% ethyl acetate in petroleum ether with 0.5% TEA) to provide compound 8 (164 mg, 55%) as a yellow solid. Compound 9 (303 mg, 100%) was obtained as a yellow oil by treating compound 8 (345 mg, 1.09 mmol) with 4N HCl/Dioxane (3 mL). To a solution of compound 12 (0.8 g; 4.5 mmol) in N-methylpyrrolidone (5 ml), water (0.5 ml) and hydrochloric acid (5-6 drops) were added. The mixture was stirred at 100 C. for 6 h. The mixture was cooled to room temperature and water (100 ml) was added. Then NaHCO3 sat. (20 ml) was added, the product was extracted with EtOAc (5*20 ml). Combined extracts were dried over Na2SO4 and concentrated to afford compound 13 (0.6 g, 81%) as pink solid. A solution of compound 13 (1.8 g; 11 mmol) in POCl3 (20 ml) was stirred at 100 C. for 12 h. Then POCl3 was evaporated under reduced pressure. To a residue ice water (100 ml) and then NaHCO3 sat. (25 ml) were added, the product was extracted with EtOAc (3*35 ml). Combined extracts were dried over Na2SO4 and concentrated to afford compound 14 (0.8 g, 40%) as light-yellow solid At 143 C., to molten 3-methyl-1H-1,2,4-triazole (744 mg, 8.95 mmol) under N2 atmosphere, was added compound 14 (392 mg, 1.79 mmol). After stirring for 20 hrs, the reaction mixture was cooled down to r.t. and partitioned between H2O (20 mL) and EA (20 mL). The layers were separated and the aqueous layer was extracted with EA (20 mL*3). The combined organic layers was dried over Na2SO4, filtered and concentrated. The residue was purified by prep. HPLC (C18, 10% to 89% acetonitrile in water (0.1% formic acid)) to compound 19 (182 mg, 44%) as a white solid. To a stirred solution of AlCl3 (1.588 g, 11.9 mmol) in DCM (10 mL) was added methyl 2-chloro-2-oxoacetate (389 mg, 3.18 mmol) and the resulting mixture was stirred at r.t. until it became a clear solution before introduction of compound 19 (182 mg, 0.79 mmol, in 1 mL DCM). The stirring was continued at r.t. overnight. After completion of the reaction, the mixture was quenched with sat. NaHCO3 and extracted with DCM (10 mL*3). The combined organic layers were washed with brine, dried over Na2SO4 and concentrated. The residue was purified by flash chromatography (silica gel, 0?90% ethyl acetate in petroleum ether) to provide compound 20 (58 mg, 23%) as a yellow oil. To a stirred solution of compound 20 (58 mg, 0.18 mmol) in MeOH/H2O (1 mL/2 mL) was added NaOH (15 mg, 0.37 mmol). After stirring at r.t. for 15 min, the reaction mixture was neutralized with 1N HCl, concentrated and lyophilized to provide compound 21 (73 mg, 95%, mixed with NaCl) as a green solid. Compound 21 (55 mg, 0.18 mmol) in DMF and compound 9 (59 mg, 0.27 mmol) were added to DIPEA (0.28 mL, 1.63 mmol) and DEPBT (325 mg, 1.09 mmol). After stirring at r.t. overnight, the reaction mixture was concentrated to remove DMF under the reduced pressure. The residue was partitioned between with EA (10 mL) and sat. NaHCO3 (10 mL). The layers were separated and the aqueous layer was extracted with EA (10 mL*2). The combined organic layers was dried over Na2SO4, filtered and concentrated. The crude product was purified by preparative HPLC to give compound SC11 (22 mg, 24%).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-Methyl-1H-1,2,4-triazole, in my other articles.

Reference:
Patent; Drexel University; Cocklin, Simon; (79 pag.)US2016/214998; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics