Category: Triazoles

Related Products of 16681-70-2, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[0799] lH-1,2,3-triazole-5-carboxylic acid (3.4 mg, 30f.tmol) was combined with HATU (11 mg, 30 f.tmol) in DMF(0.3 mL) and stirred at room temperature for 10 minutes;DIPEA (1 eq.) was added and the mixture was stirred for 1minute. Compound 2 (1 0 mg, 30 f.tmol) was dissolved in DMF(0.5 mL) and DIPEA (5.2 f.LL, 30 fllllOI) was added, followedby addition of the activated acid solution. The mixture wasstirred at room temperature for 30 minutes, after which timeLCMS indicated desired product formation. Half of the crudeproduct was purified using reverse phase chromatography toyield Compound a (1.4 mg) as a TFA salt. MS m/z [M+Hrcalc’d for C26H22CIF3N50 3 , 550.18; found 550. Half of thecrude product was used in the next step without further purification.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-[1,2,3]Triazole-4-carboxylic acid.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; Fleury, Melissa; Beausoliel, Anne-Marie; Hughes, Adam D.; Long, Daniel D.; Wilton, Donna A.A.; US2015/210690; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: 1,4-Dimethyl-1H-1,2,3-triazole

(S)-3-Bromo-7-chloro-5-(phenyl(tetrahydro-2H-pyran-4-yl)methyl)-5H- pyrrolo[2,3-b:4,5-b’]dipyridine (300 mg, 0.657 mmol), l,4-dimethyl-lH-l,2,3-triazole (77 mg, 0.788 mmol), Me4NOAc (87 mg, 0.657 mmol), and PdCl2(PPh3)2 (32.3 mg, 0.046 mmol) were weighed into a vial, and 12 mL NMP was added, and the air was replaced with argon. The sealed reaction vial was heated at 100 C with stirring overnight. The next morning, LC/MS showed the mono-alky lated product as the major peak and a significant amount of the dialkylated product. It was cooled to room temperature and diluted with EtOAc and washed twice with brine. The organic layer was dried over MgS04, and concentrated to obtain a crude mixture. The crude material was purified via preparative LC/MS with the following conditions: Column: XBridge C18, 19 x 200 mm, 5-muiotaeta particles; Mobile Phase A: 5:95 ACN: water with 10-mM NEUOAc; Mobile Phase B: 95:5 ACN: water with 10-mM NH4OAc; Gradient: 20-60% B over 15 min, then a 5- min hold at 100% B; Flow: 20 mL/min. Fractions containing the title compound were combined and dried via centrifugal evaporation. Estimated purity by LC/MS analysis was 99%. An analytical LC/MS injection was used to determine the final purity. Conditions: Column: Waters BEH CI 8, 2.0 x 50 mm, 1.7-muiotaeta particles; Mobile Phase A: 5:95 ACN:water with 10 mM NH4OAc; Mobile Phase B: 95:5 ACN:water with 10 mM NH4OAc; Temperature: 50 C; Gradient: 0%B, 0-100% B over 3 min, then a 0.5-min hold at 100% B; Flow: 1 mL/min; Detection: UV at 220 nm; RT = 1.51 min, LC/MS (M+H) = 534.5. NMR (500MHz, DMSO-c e) delta 8.82 (d, J=8.1 Hz, 1H), 8.67 (s, 1H), 8.57 (br. s., 1H), 7.77 – 7.71 (m, 3H), 7.35 – 7.29 (m, 2H), 7.27 – 7.21 (m, 1H), 6.06 (br. s., 1H), 4.38 (s, 3H), 4.03 (s, 3H), 3.90 (s, 1H), 3.74 (d, J=10.6 Hz, 1H), 3.62 (br. s., 1H), 3.40 (s, 1H), 3.24 (t, J=11.2 Hz, 1H), 2.54 (s, 3H), 2.31 (s, 3H), 1.62 (br. s., 1H), 1.51 – 1.39 (m, 1H), 1.35 – 1.21 (m, 1H), 1.14 (d, J=12.5 Hz, 1H); LC/MS (M+H) = 534.3 [Column: Waters Aquity BEH CI 8 2.1 X 50 mm 1.7u; Mobile Phase A: water with 0.05% TFA; Mobile Phase B: ACN with 0.05% TFA; Temperature: 40 C; Gradient: 2- 98% B over 1.5 min; Flow: 0.8 mL/min].

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 1,4-Dimethyl-1H-1,2,3-triazole help many people in the next few years.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; NORRIS, Derek J.; VACCARO, Wayne; DEBENEDETTO, Mikkel V.; DEGNAN, Andrew P.; DELUCCA, George V.; DESKUS, Jeffrey A.; HAN, Wen-Ching; KUMI, Godwin Kwame; SCHMITZ, William D.; STARRETT, John E., JR.; HILL, Matthew D.; HUANG, Hong; (563 pag.)WO2016/183118; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 16681-70-2, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

lH-l,2,3-triazole-5-carboxylic acid (55.9 mg, 494 muiotaetaomicron) was combined with HATU (188 mg, 494 mupiiotaomicron) in DMF (0.5 mL) and stirred for 10 minutes; DIPEA (1.5 eq.) was added and the mixture was stirred for 1 minute. Compound 3 (200 mg, 494 muiotaetaomicron) was dissolved in DMF (1 mL) and DIPEA (259 mu^, 1.5 mmol) was added, followed by addition of the activated acid solution. The mixture was stirred for 30 minutes and the solvent was evaporated. The mixture was purified by normal phase chromatography (0-100% (0791) EtOAc/hexanes) to yield Compound 4 (100 mg).

Future efforts will undeniably focus on the diversification of the new catalytic transformations. These may comprise an expansion of the substrate scope from aromatic and heteroaromatic compounds to other hydrocarbons. Keep reading other articles of 16681-70-2.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 4928-88-5

EXAMPLE 9 A mixture of methyl 1,2,4-triazole-3-carboxylate (26.4 g, 0.21 mole) and beta-D-ribofuranosyl-1,2,3,5-tetraacetate (60.2 g, 0.19 mole) was melted and then 1.1 g of p-toluenesulfonic acid was added thereto. The reaction mixture was reacted for hours, while maintaining the temperature of the reaction mixture at 95+-5° C. And then, the reaction mixture was crystallized with 421.1 ml of methanol to give 64 g of 1-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxylic acid methyl ester (yield: 88percent).

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to Methyl 1H-1,2,4-triazole-3-carboxylate help many people in the next few years.

Reference:
Patent; Lee, Tai-Au; Park, Nam-Jin; Khoo, Ja-Heouk; Lee, Byung-Cheol; US2003/120064; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world.7170-01-6, name is 3-Methyl-1H-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 7170-01-6

EXAMPLE 103 [4-(3-Methyl-1,2,4-triazol-1yl)-2-trifluoromethyl-phenyl](5H,11H-pyrrolo[2,1-c][1,4]benzodiazepin-10-yl)-methanone To a suspension of 60% sodium hydride in oil (0.3 g) in dimethylformamide (50 ml) was added dropwise 3-methyl-12,4-triazole (0.45 g).. After hydrogen gas evolution ceased, 4-fluoro-2-trifluoromethyl-phenyl-(5H,11H-pyrrolo[2,1-c][1,4]-benzodiazepine-10-yl)-methanone (1.76 g) was added and the reaction mixture was heated in a sand bath at 110 C for 18 hours.. The mixture was poured onto ice, diluted with brine, and extracted with dichloromethane.. The combined extracts were dried over anhydrous sodium sulfate and filtered through a short column of anhydrous sodium magnesium silicate.. The solution was concentrated in vacuo and the residue was triturated with diethyl ether to give 0.81 g of the title compound as colorless crystals, m.p. 148-150 C, MS m/z: 438.2 (M+H)+, 875.8 (2M+H)+.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 3-Methyl-1H-1,2,4-triazole ,and how the biochemistry of the body works.

Reference:
Patent; Wyeth; EP1000062; (2004); B1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-70-2, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 16681-70-2, name is 1H-[1,2,3]Triazole-4-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(25,^5)-4-Amino-54jiphenyl-4-yl-2-methoxymethylpentanoic acid ethyl ester (16 mg, 47 muiotaetaomicron) was dissolved in DMF (0.3 mL). lH-l,2,3-Triazole-4-carboxylic acid (5.3 mg, 47 muiotaetaomicron) and HATU (18 mg, 47 muiotaetaomicron) were added followed by DIPEA (25 mu, 141 muetaiotaomicron). The mixture was stirred for 30 minutes and concentrated under reduced pressure to yield Compound 1, which was used in the next step without purification.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-[1,2,3]Triazole-4-carboxylic acid, hurry up and to see.

Reference:
Patent; THERAVANCE BIOPHARMA R&D IP, LLC; FLEURY, Melissa; BEAUSOLIEL, Anne-Marie; HUGHES, Adam D.; LONG, Daniel D.; WILTON, Donna A.A.; WO2015/116786; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

EXAMPLE 2 (2-(2H- 1 ,2,3-triazol-2-yl)phenyl)(4-(4,6-dimethylpyrimidin-2-yl)- 1 ,4-diazepan- 1 -yl)methanone To a solution of l-(4,6-dimethylpyrimidin-2-yl)-l,4-diazepane hydrochloride 1-2 (1.4 g, 5.2 mmol), 2-(2H-l,2,3-triazol-2-yl)benzoic acid Int E (1.1 g, 5.7 mmol), EDC (1.5 g, 7.8 mmol), and l-hydroxy-7-azabenzotriazole (1.1 g, 7.8 mmol) in DMF (10 mL) was added DIPEA (4.5 mL, 26 mmol) and the mixture was stirred at room temperature for 16 h. The solvent was concentrated in vacuo and the crude residue was redissolved in DCM and purified by silica gel chromatography (100% hexanes, 2 min; 0-100% EtOAc/hexanes, 20 min; 100% EtOAc, 4 min) to provide Example 2 (1.5 g) as a white solid. MS (ESI) m/z: 378.4 (M+H).

I hope this article can help some friends in scientific research. I am very proud of our efforts over the past few months and hope to 2-(2H-1,2,3-Triazol-2-yl)benzoic acid help many people in the next few years.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KUDUK, Scott, D.; REGER, Thomas, S.; ROECKER, Anthony, J.; WO2015/95111; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 61-82-5, name is 1H-1,2,4-Triazol-5-amine belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 1H-1,2,4-Triazol-5-amine

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 61-82-5, and we look forward to future research findings.

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 4928-87-4, New Advances in Chemical Research in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of intermediate 27b (0.26 g, 0.58 mmol) in 15 ml of DMF was added EDCI (0.17 g, 0.89 mmol)(0 · 12g, 0 · 89mmo 1) After stirring and dissolving, 1H-1,2,4-triazole-3-carboxylic acid (0.55 g, 0.44 mmo 1)DIEA 0.2ml (1.17mmol), stirring at room temperature for 12h, TLC detection, the end of the reaction, the liquid spinning was crude, crude by silica gel GColumn chromatography [eluent (methanol: dichloromethane) = 50: 500 (nu: nu)] to give 0.1 g of the title compound of Example 34,Yield: 30.3%

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1,2,4-Triazole-3-carboxylic acid.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 288-88-0, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-88-0, name is 1H-1,2,4-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 1; Preparation of l-(4-NitrophenylmethyI)-l,2,4-triazole (i); Preparation of sodium triazole dihydrate; Into a IOOL glass flask were charged 50L of isopropanol and 2.9kg of sodium hydroxide flakes. The reaction mass was heated to 70C. After maintaining for 30min at same temperature lH-l,2,4-triazole (5.0kg) was added to the reaction mass. The reaction mass was maintained at reflux temperature for lhr. Slowly cooled the reaction mass to 30C and maintained for 3hr. The reaction mass was filtered and the wet cake washed with 5L of isopropanol. The wet material was dried at 600C until a constant weight is reached. Yield of sodium 1,2,4-triazole is 6.5kg.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about 1H-1,2,4-Triazole.

Reference:
Patent; NATCO PHARMA LIMITED; PULLA REDDY, Muddasani; SATYASRINIVAS, Hanumara; RADHARANI, Kagitha; VENKAIAH CHOWDARY, Nannapaneni; WO2006/137083; (2006); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics