Category: Triazoles

Research speed reading in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 1001401-62-2, name is 2-(2H-1,2,3-Triazol-2-yl)benzoic acid belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 2-(2H-1,2,3-Triazol-2-yl)benzoic acid

A solution of 2-(2H-l,2,3-triazol-2-yl)benzoic acid (P. Coleman, J. Schreier,WO2007/126934) (500 mg, 2.64 mmol) in SOCl2(5 mL) was heated to refluxed for 1 hour, cooled and concentrated in vacuo. The oil was dissolved in toluene (5 mL) and added to a solution of ((3i?,6i?)-6-methylpiperidin-3-yl)methanol hydrochloride (M. Giradin et al, Org. Proc. Res. Dev. 2013, 17, 61-68) (437 mg, 2.65 mmol) in toluene (5 mL), then aq. sodium hydroxide (5.3 mL, 1 mol/L) was added. The mixture was stirred at 10C for 12 h, poured into water (5 mL) and extracted with EtOAc (5 mL x 3). The combined organic layers were dried over Na2S04, filtered and concentrated in vacuo and the residue purified by chromatography on silica (petroleum ether: EtOAc =5: 1 to petroleum ether: EtOAc =1 :1) to afford the title compound. LRMS m/z (Mu+Eta) 301.2 found, 301.2 required.

The catalyzed pathway has a lower Ea, but the net change in energy that results from the reaction is not affected by the presence of a catalyst. In my other articles, you can also check out more blogs about 1001401-62-2

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas C.; KUDUK, Scott D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/20933; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 61-82-5, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 61-82-5, name is 1H-1,2,4-Triazol-5-amine, molecular formula is C2H4N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: 20 mg of gamma-Fe2O3Ph-PMO-NaHSO4 was added to a roundbottomflask containing an aromatic aldehyde (1 mmol), 3-amino-1,2,4-triazole 2 (1.0 mmol), b-diketones (dimedone 3, 1,3-cyclohexadione 4 or ethyl acetoacetate 5) (1.0 mmol) and stirredunder solvent-free conditions at 100 C in certain times. Meanwhile,the progress of the reactionwas indicated by TLC (n-hexane:ethyl acetate; 7:3). With completing the reaction, 3ml ethanol waspoured and the magnetic nanocomposite was separated in thepresence of a magnetic stirring bar; the reaction mixture becameclear. The crude product was recrystallized from ethanol to give thepure product. The pure products were characterized by conventionalspectroscopic methods. Physical and spectral data for theselected compounds are represented below.

We very much hope you enjoy reading the articles and that you will join us to present your own research about 61-82-5, Happy reading!

Reference:
Article; Haghighat, Mahdieh; Shirini, Farhad; Golshekan, Mostafa; Journal of Molecular Structure; vol. 1171; (2018); p. 168 – 178;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 16681-65-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 1-methyl-1H-1,2,3-triazole (0.28 g, 3.37 mmol) in dry THF (3 mL) was cooled in a -78 C. bath and n-butyllithium (2.5 M in hexanes, 1.26 mL, 3.15 mmol) was added dropwise over a 20 minute period. The suspension was stirred in the cold bath for 30 minutes and then 1-acetyl-N-methoxy-N-methylpiperidine-4-carboxamide (0.74 g, 3.45 mmol, Intermediate 52: step a) dissolved in THF (3 mL) was added dropwise. The resulting suspension was stirred at -78 C. for 5 minutes then warmed to 0 C. and stirred for an additional 30 minutes. The mixture was warmed to room temperature and stirred for 2.5 hours then quenched with saturated aqueous NH4Cl. The aqueous mixture was extracted with EtOAc (2*). The combined EtOAc extracts were dried over Na2SO4, filtered, concentrated to dryness and chromatographed (EtOAc/DCM) to provide the title compound.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1-Methyl-1H-1,2,3-triazole.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; Jones, William Moore; Goldberg, Steven; US2015/105366; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 288-36-8, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid A-2, followed by the undesired regioisomer isomer, l-(2H-l,2,3-triazol-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to 00C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-4 as a yellow solid.

This is the end of this tutorial post, and I hope it has helped your research about 288-36-8!

Reference:
Patent; MERCK SHARP & DOHME CORP.; COX, Christopher, D.; FLORES, Broc; SCHREIER, John, D.; WO2010/48016; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 288-36-8, name is 1H-1,2,3-Triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To 2-iodo-5-methylbenzoic acid (1.5 g, 5.72 mmol), copper(I) iodide (1.090 g, 5.72 mmol) and (lR,2R)-N,N’-dimethyl-l,2-cyclohexanediamine (0.814 g, 5.72 mmol) was added DMF (10 ml) under nitrogen and then 2H-l,2,3-triazole (0.474 g, 6.87 mmol). The reaction mixture was heated at 120 C at the microwave Personal Chemistry for 15 minutes. UPLC- MS monitor showed that the reaction was complete. After cooling at room temperature water was added and the aqueous washed with EtOAc. Then the aqueous acidified to pH =1 with aqueous 1 M HC1 and extracted with EtOAc. The phases were separated on a hydrophobic frit, the combined organic solvent was removed to give the crude product (2.4 g).The crude compound was purified by silica gel chromatography (SNAP KP-Sil lOOg cartridge) eluted with 5 CV of a mobile phase prepared with DCM (959.04 ml), acetic acid (0.96 ml) and MeOH (40 ml). The evaporation of proper fractions gave a yellow oil which was triturated with toluene (4 x 50 ml) and the title compound D44 was obtained as yellow solid (540 mg).UPLC (Basic GEN QC): rt = 0.35 minutes, peak observed: 204 (M+l) Ci0H9N3O2 requires: 203.1H NMR (400 MHz, DMSO-d6) delta ppm 2.44 (s, 3 H) 7.52 (dd, 1 H) 7.59 (s, 1 H) 7.64 (d, 1 H) 8.06 (s, 2 H).

I am very proud of our efforts over the past few months and hope to 1H-1,2,3-Triazole help many people in the next few years.

Reference:
Patent; GLAXO GROUP LIMITED; DI FABIO, Romano; WO2012/89606; (2012); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 49607-51-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 49607-51-4, name is 1-Methyl-1H-1,2,4-triazol-3-amine, molecular formula is C3H6N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

33). Synthesis of 4-[(3,5-bis-trifluoromethyl-benzoyl)-(1-methyl-1H-{1;2.4]triazol-3-y.)- amino]-2,6-diethyl-piperidine-1-carboxylic acid isopropyl ester; To a solution of 2,6-diethyl-4-oxo-piperidine-1-carboxylic acid isopropyl ester (1 mmol, 240 mg), 1-methyl-1H-[1 ,2,4]triazol-3-ylamine (2 mmol, 200 mg) and acetic acid (2 mmol, 114 uL) in dichloroethane (2 mL) is added sodium triacetoxyborohydride (2 mmol, 424 mg) at room temperature and stirred for 15 hours. The reaction is quenched by addition of saturated aq. sodium hydrogen carbonate. The mixture is extracted with dichloromethane and the combined organic layer is concentrated under reduced pressure. The obtained residue is purified by silica gel column chromatography (eluent: DCM / MeOH) to give 2,6- diethyl-4-(1 -methyl- 1H-[1 ,2,4}triazol-3-ylamino)-piperidine-1-carboxylic acid isopropyl ester (168 mg, 52percent); ESI-MS m/z: 324 [M+1]\ Retention time 2.06 min (condition A).

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1-Methyl-1H-1,2,4-triazol-3-amine, hurry up and to see.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GMBH; WO2008/9435; (2008); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 118863-62-0, name is 3-(4-Bromophenyl)-1H-[1,2,4]triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Product Details of 118863-62-0

Example 43 Preparation of 3-(4-bromophenyl)-1-(4-(trifluoromethoxy)phenyl)-1H-1,2,4-triazole (C23) In a 500 mL flask, 3-(4-bromophenyl)-1H-1,2,4-triazole (20.0 g, 89.6 mmol), 1-iodo-4-(trifluoromethoxy)benzene (39.0 g, 135 mmol) were diluted with N,N-dimethylformamide and water (4:1, 100 mL). Then copper(I) iodide (15.3 g, 80.6 mmol), 8-hydroxyquinoline (8.50 g, 58.2 mmol) and cesium carbonate (87.4 g, 269 mmol) were added. The reaction was heated to 150 C. and stirred for 16 hours. The reaction mixture was cooled to room temperature, diluted with ethyl acetate and filtered through Celite. Brine solution was added to the filtrate and stirred for 15 minutes. The layers were separated and the aqueous layer further extracted with ethyl acetate. The combined organics were dried over magnesium sulfate, filtered, and concentrated. The resulting residue was purified by flash column chromatography using 15% ethyl acetate/petroleum ether as eluent to afford the title compound as a white solid (10.0 g, 29%): mp 100-103 C.; 1H NMR (300 MHz, DMSO-d6) delta 9.42 (s, 1H), 8.07 (d, J=9.0 Hz, 2H), 8.05 (d, J=9.0 Hz, 2H), 7.73 (d, J=8.4 Hz, 2H), 7.62 (d, J=8.4 Hz, 2H); ES+ m/z 385 ([M+H]+).

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 3-(4-Bromophenyl)-1H-[1,2,4]triazole, in my other articles.

Reference:
Patent; Dow AgroSciences LLC; Baum, Erich W.; Fischer, Lindsey G.; Crouse, Gary D.; Sparks, Thomas C.; Giampietro, Natalie C.; Dent, III, William H.; Niyaz, Noormohamed M.; Petkus, Jeff; Demeter, David A.; Lambert, William Thomas; McLeod, CaSandra L.; Rigsbee, Emily Marie; Renga, James M.; (128 pag.)US2016/21883; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

To a 20 ml microwave vial containing 2-bromo-4,5-dimethoxybenzoic acid (3 g, 1 1 .5 mmol), copper iodide (0.04 g, 0.5 mol%), cesium carbonate (7.5 g, 23 mmol), triazole (1 .33 mL, 23 mmol) and finally (R,R)-(-)-N,N’-dimethyl-1 ,2- cyclohexanediamine ligand (0.36 mL, 2.3 mmol) was added DMF (12 mL). The resulting clumpy yellow slurry was stirred until evenly dispersed then heated to 120C for 10-20 min using a microwave. At this point the reaction mixture appeared as a blue slurry which was then diluted with 20 mL ether and 20 mL H2O. The resulting solution was thoroughly stirred and transferred to a seperatory funnel then the RBF was subsequently rinsed with 20 mL ether and H2O each. The aqueous layer was separated from the organic layer and acidified to pH 1 with 6 mL cone. HCI. The now brown/ lime green aqueous layer was extracted twice with EtOAc. The bright yellow organic layers were combined and dried with Na2SO4 and then cone, into a yellow powder under reduced pressure which was purified by FCC (0-5% MeOH in DCM w/ 0.5% AcOH) to afford 2,3-dimethoxy-6-[1 ,2,3]triazol-2-yl-benzoic acid (60%) and 2,3- dimethoxy-6-[1 ,2,3]triazol-1 -yl-benzoic acid (20%). Data for 2,3-dimethoxy-6- [1 ,2,3]triazol-2-yl-benzoic acid, MS (ESI): mass calculated for CnHnN3O4, 249.23; m/z found 250.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 7.87 (s, 2H), 7.47 (s, 1 H), 7.18 (s, 1 H), 3.94 (s, 3H), 3.91 (s, 3H).; Intermediate 80: 2,3-Dimethoxy-6-[1 , 2, 3]triazol-1 -yl-benzoic acid.The title compound was isolated from the procedure used to prepareIntermediate 79 with a 20% yield. MS (ESI): mass calculated for Cn Hn N3O , 249.23; m/z found 250.3 [M+H]+. 1H NMR (400 MHz, CD3OD): 8.17 (d, J = 1 .0 Hz, 1 H), 7.82 (d, J = 1 .0 Hz, 1 H), 7.62 (s, 1 H), 7.09 (s, 1 H), 3.95 (s, 3H), 3.91 (s, 3H).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 288-36-8.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BRANSTETTER, Bryan, James; LETAVIC, Michael, A.; LY, Kiev, S.; RUDOLPH, Dale, A.; SAVALL, Brad, M.; SHAH, Chandravadan, R.; SHIREMAN, Brock, T.; WO2011/50200; (2011); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. category: Triazoles

To a stirred solution of 4-[1,2,4]-triazol-1-yl-benzaldehyde (9.0 g, 52 mmol) in 1,4-dioxane (100 mL), were added K2CO3 (10.76 g, 78 mmol) and methyl triphenyl phosphonium bromide (22.2 g, 62.4 mmol) at room temperature. The resultant reaction mixture was heated to 70 C. for 18 h. After completion of the reaction (TLC), the reaction mixture was cooled to room temperature and filtered and the obtained filtrate was concentrated under reduced pressure. Purification by flash chromatography (SiO2, 100-200 mesh; 25-30% EtOAc in petroleum ether) to afforded the title compound as a white solid (5.6 g, 63%): ESIMS m/z 172.09 ([M+H]+).

If you are hungry for even more, make sure to check my other article about 27996-86-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171308; (2014); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 6818-99-1, New Advances in Chemical Research in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 6818-99-1, name is 3-Chloro-1,2,4-triazole, molecular formula is C2H2ClN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Under an atmosphere of argon, (2S,4R)-N-(1-cyanocyclopropyl)-4-(4-fluorophenylsulfonyl)- 1- (1- (trifluoromethyl)cyclopropanecarbonyl)pyffolidine-2-carboxamide (example 33, step b, 0.3 g, 634 imol) was combined with N,Ndimethylacetamide (12 mL) to give a colorless suspension. 3-Chloro-1H-1,2,4-triazole (134 mg, 1.27 mmol) and cesium carbonate (413 mg, 1.27 mmol, Eq: 2) were added. The reaction mixture was stirred over the weekend at ambient temperature, and wassubsequently heated to 140C for 30 mm in a microwave oven. The reaction mixture was poured into water (50 mL) and extracted with ethyl acetate (2 x 50 mL). The crude material was purified by preparative HPLC to yield the title compound as a colorless viscous oil (93.9mg, 26.6 %). mlz = 557.09 [M+H?i.

In the meantime we’ve collected together some recent articles in this area about 3-Chloro-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; HAAP, Wolfgang; KUHN, Bernd; LUEBBERS, Thomas; PETERS, Jens-Uwe; (93 pag.)WO2017/144483; (2017); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics