Category: Triazoles

Research speed reading in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 423165-07-5

General procedure: A mixture of trisallene 3 (0.25 mmol), aryl/heteroaryl iodides (0.90 mmol), nucleophiles (0.90 mmol), Pd2(dba)3 (7.5 mol %), TFP (tri-(2-furyl)phosphine) (30 mol %), and K2CO3 (2.25 mmol) in MeCN (5 mL) was stirred and heated at 80 C (oil bath temperature) until the starting material was completely consumed as monitored by TLC (see Table 1). The mixture was cooled and solvent removed under vacuo. The residue was dissolved in CHCl3 (25 mL) and extracted with H2O (20 mL) three times. The organic layer was dried over anhydrous MgSO4 and evaporated under rotatory evaporator to give the crude product, which was purified by flash chromatography.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 423165-07-5.

Reference:
Article; Gueltekin, Zeynep; Elboray, Elghareeb E.; Aly, Moustafa F.; Abbas-Temirek, Hussien H.; Shepherd, Helena J.; Grigg, Ronald; Tetrahedron; vol. 70; 33; (2014); p. 4934 – 4941;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. name: exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane

[Ill] Synthesis of tert-butyl 3-(3-(3-isopropyl-5-methyl-4H-l .2.4-triazol-4-ylV8- azabicvclor3.2.11octan-8-ylVl-phenyl-3-d9-propylcarbamate 107-dz (Yla = Ylb = D. Y2a = gamma2b = gamma2c = H). To a solution of amine 103 (0.20 g, 0.86 mmol), and 3-tert-butyl-3- phenylpropyl-1-di -aldehyde 111 (0.26 g, 1.03 mmol, 1.2 equiv) in CH2Cl2 (5 mL), at room temperature, was added Na2SO4. The mixture was stirred for 15 min followed by the addition OfNaCNBD3 (69 mg, 1.03 mmol, 1.2 equiv). The resultant mixture was stirred at room temperature for 15 h, diluted with 10 % K2CO3, and extracted with CH2Cl2 (3 x 20 mL). The combined organic extracts were washed with brine solution, dried over MgSO4, filtered and concentrated in vacuo to afford 107-d2, which was carried on to the next step without purification.; Amine 103 was combined with appropriately deuterated aldehyde 111 in CH2Cl2 (5 mL), Na2SO4 and NaCNBD3 to afford 107.

Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, in my other articles.

Reference:
Patent; CONCERT PHARMACEUTICALS INC.; WO2008/63600; (2008); A2;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 7411-23-6, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A mixture of 3,5-dibromo-1H-1,2,4-triazole (700 mg, 3.1 mmol), 2,2′-bipyridyl (60 mg, 0.39 mmol), copper(II) acetate (140 mg, 0.77 mmol), potassium carbonate (852 mg, 6.2 mmol) and cyclopropylboronic acid (795 mg, 9.3 mmol) was dissolved in toluene (5 mL) and water (1.5mL) and stirred at 70 C for 18 h. The reaction mixture was cooled to RT, quenched with NH4Cl (sat. aq.) and the products extracted in DCM. The combined organic fractions were dried with a phase separator and reduced in vacuo. The crude mixture was dissolved in DCM and dry-loaded onto silica. Purification via silica column chromatography eluting with 10-60% EtOAc in Pet. Ether afforded 5-dibromo-1-cyclopropyl-1,2,4-triazole and 1-allyl-3,5-dibromo-1,2,4-triazole (123 mg, 0.46 mmol, 15% yield) as an inseparable mixture. UPLC-MS (ES+, Method A): 1.52 min, m/z 267.9 [M+H]+

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 3,5-Dibromo-1H-1,2,4-triazole, hurry up and to see.

Reference:
Patent; REDX PHARMA PLC; JONES, Clifford, D.; BUNYARD, Peter; PITT, Gary; BYRNE, Liam; PESNOT, Thomas; GUISOT, Nicolas, E.S.; (318 pag.)WO2019/145729; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 60166-43-0, name is 1,4-Dimethyl-1H-1,2,3-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 60166-43-0

Under the protection of N2, a tetrahydrofuran (5.0 mL) solution of 1,4-dimethyl-1,2,3-triazole (0.56 g, 5.77 mol) was added dropwise to a tetrahydrofuran (5.0 mL) solution of butyllithium (2.77mL, 6.27 mol, 2.4 mol/L n-hexane solution) at -78C, and the resulting mixture was kept at -70C and reacted for 1h. Then chlorotributyltin (1.71 mL, 6.34 mol) was added. The system became clear, and was gradually warmed to room temperature. Water and ethyl acetate were added to the reaction flask, stirred for 15 min, and filtered through Celite filler, and the Celite filler was rinsed with ethyl acetate. After the filtrate was layered, the aqueous phase was extracted with ethyl acetate once. The ethyl acetate phases were combined, washed with a saturated sodium chloride aqueous solution, dried with anhydrous sodium sulfate, and concentrated to obtain a black residue. The residue was purified by silica gel column chromatography eluting with ethyl acetate/petroleum ether (5:1) to obtain a luminous yellow oily product (1.40g, 63%). 1H NMR (400 MHz, CDCl3) delta 4.03 (s, 3H), 2.35 (s, 3H), 1.45-1.54 (m, 6H), 1.28-1.40 (m, 6H), 1.16-1.21 (m, 6H), 0.91 (t, 9H).

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 60166-43-0.

Reference:
Patent; Chia Tai Tianqing Pharmaceutical Group Co.,Ltd; Centaurus BioPharma Co., Ltd.; Lianyungang Runzhong Pharmaceutical Co., Ltd.; LI, Jijun; WU, Wei; ZHU, Yan; WANG, Huting; ZHAO, Lijia; HE, Weinan; SUN, Yinghui; PENG, Yong; HAN, Yongxin; (108 pag.)EP3412669; (2018); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Step 3: 4-(2H-1.2.3-Triazol-2-yl)thiophene-3-carboxylic acid (Intermediate F) To a mixture of the product from step 2 (7.9 g, 38 mmol), cesium carbonate (24.8 g,76 mmol) and Cul (2.88 g, 7.6 mmol) in DMF (200 mL) were added 2H-[l,2,3]triazole (5.24 g,76 mmol) and N,N’-dimethyl-cyclohexane-l,2-diamine (0.9 g, 6.5 mmol) and the mixture was heated to 110 C overnight. The cooled reaction mixture was adjusted to ~pH=12 with 1M sodium hydroxide aqueous solution and extracted with EtOAc (50 mL x 3). The aqueous layer was adjusted to ~pH=4 with 1M HC1 aqueous solution and extracted with EtOAc (50 mLx4). The extracts was dried over Na2SC>4, filtered. The filtrate was concentrated in vacuo and the residue was purified by chromatography on silica (petroleum ether : EtOAc =10: 1) to provide the title compound. LRMS m/z (M+H) 196.0 found, 196.0 required.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about 1H-1,2,3-Triazole, hurry up and to see.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KIM, Ronald; KUDUK, Scott, D.; LIVERTON, Nigel; ZHUO, Gang; (116 pag.)WO2016/100161; (2016); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 16681-65-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 16681-65-5, name is 1-Methyl-1H-1,2,3-triazole, molecular formula is C3H5N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

1-Methyl-1H-1,2,3-triazole was prepared according to the literature reference WO2008/98104. To a 2 L flask containing 1-methyl-1H-1,2,3-triazole (9 g, 108.3 mmol) was added THF (1500 mL) and the solution was cooled to -40 C. To this colorless homogeneous solution was added n-butyllithium (2.5 M in hexanes, 45 mL, 112.5 mmol) dropwise which immediately afforded a dark brown viscous mixture. The mixture was kept between -10 to -20 C. for 60 minutes, then a THF solution of 2,4-dimethylthiazole-5-carbaldehyde (17.2 g, 121.8 mmol in 200 mL THF) was introduced via cannula. Once the aldehyde was added the reaction was allowed to warm to room temperature. After 3 hours, the reaction was quenched by pouring it into a saturated solution of aqueous NH4Cl. The aqueous portion was extracted with EtOAc in portions, 7*400 mL. The combined organics were washed with brine, dried over MgSO4, filtered and concentrated to dryness to give a brown oil. Chromatography on silica gel (10% acetone-DCM increasing to 50% acetone and increasing to 10% MeOH-DCM) provided the title compound as an amber solid.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1-Methyl-1H-1,2,3-triazole is helpful to your research.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Related Products of 930-33-6, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 930-33-6, name is 1H-1,2,4-Triazol-3(2H)-one, molecular formula is C2H3N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

EXAMPLE 5 3-[6-Bromo-2-fluoro-3-(5-oxo-1,5-dihydro-[1,2,4]triazol-4-ylmethyl)-phenoxy]-5-chloro-benzonitrile (I-8) Ar=3-chloro-5-cyano-phenyl A solution of A-2d (200 mg, 0.477 mmol), 2,4-dihydro-[1,2,4]triazol-3-one (10, CASRN 930-33-6, 0.040 g, 1.0 eq), K2CO3 (0.13 g, 2.0 eq), and KI (0.008 g, 0.1 eq) and MeCN (1.5 mL) was heated to 85 C. for 2 h and then cooled to RT. The reaction mixture was diluted with 10% MeOH/DCM, and washed sequentially with water and brine. The organic extracts were evaporated and the crude product purified by SiO2 chromatography eluding with a MeOH/DCM gradient (3-10% MeOH) to afford 0.020 g (10%) of 1-8 as a white solid.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 1H-1,2,4-Triazol-3(2H)-one.

Reference:
Patent; Roche Palo Alto LLC; US2009/12034; (2009); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4, New Advances in Chemical Research in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic,A common heterocyclic compound, 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

10.9 mg (0.077 mmol) of 1,2,4-triazole-3-carboxylic acid was dissolved in 5 ml of dichloromethane and 45.2 mg(0.119 mmol) of 2- (7-azobenzotriazole-Nu, Nu, N ‘, N’-tetramethyluronium hexafluorophosphate under ice bath was added 21.9 mg(0.216 mmol) of triethylamine,Stirring for 30min,30 mg of intermediate 121 (0.054 mmol) was added,Stir overnight at room temperature. TLC checkMeasurement,After the reaction,Add lml of saturated sodium bicarbonate solution,Stirring for 20min,Dispensing,The aqueous phase was extracted with dichloromethane,mergeThe organic phase,dry,Steamed in crude.The crude product was purified by preparative silica gel plate (methanol: dichloromethane = 1: 10)The target compound was 9 mg in 21%

I am very proud of our efforts over the past few months and hope to 1,2,4-Triazole-3-carboxylic acid help many people in the next few years.

Reference:
Patent; Beijing Foreland Pharma Co., Ltd; Zhang, Xingmin; Wang, Ensi; Niu, Shengxiu; Guo, Jing; Dai, Zhuolin; Zheng, Nan; Ji, Qi; Li, Qinyan; Liang, Tie; (109 pag.)CN104411706; (2016); B;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. Redox catalysis has been broadly utilized in electrochemical synthesis due to its kinetic advantages over direct electrolysis. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

Sodium hydride (5.3 g, 220.85 mmol, 1.50 equiv) was added in portions to a stirred mixture of1H-1,2,3-triazole (10 g, 144.79 mmol, 1.00 equiv) in THF (500 mL) at 0 C under nitrogen. After1 hour 2-(trimethylsilyl)ethoxymethyl chloride (36 g, 235.76 mmol, 1.60 equiv) was added and theresulting solution was stirred for 12 h at room temperature. The reaction was quenched by water, extracted with ethyl acetate, dried over anhydrous sodium sulfate, and concentrated under vacuum. The residue was applied onto a silica gel column with ethyl acetate/petroleum ether (1:10). This resulted in 10 g (28%) of the title compound as yellow oil. LC-MS (ES, mlz): 200 [M+H].

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 288-36-8, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; BLAQUIERE, Nicole; BURCH, Jason; CASTANEDO, Georgette; FENG, Jianwen A.; HU, Baihua; STABEN, Steven; WU, Guosheng; YUEN, Po-wai; WO2015/25025; (2015); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Synthetic Route of 4928-87-4, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 4928-87-4, name is 1,2,4-Triazole-3-carboxylic acid, molecular formula is C3H3N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: The tail group amines Ar-NH2 (Ar a-d) (19.5 mmol,1.1 equiv) were added to a stirring solution of 1,2,4-triazole-3-carboxylic acid 12 (2.00 g, 17.7 mmol, 1.0 equiv) in dry DMF(30 mL) at room temperature. After 5 min, TBTU (6.0 g, 18.6 mmol,1.0 equiv) and DIPEA (11.0 mL, 61.9 mmol, 3.5 equiv) were added insequence. The resulting solution was stirred at room temperaturefor 16 h. After completion of the reaction, as indicated by TLC, DMFwas removed by rotary evaporation at 30 torr and 70 C. The crudematerial was purified by methods described in each individualentry.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 1,2,4-Triazole-3-carboxylic acid is helpful to your research.

Reference:
Article; Chakraborty, Amarraj; Dou, Yali; Gibbons, Garrett S.; Grigsby, Sierrah M.; Lee, Young-Tae; Liao, Chenzhong; Mathew, Bini; Moukha-Chafiq, Omar; Nikolovska-Coleska, Zaneta; Pathak, Vibha; Reynolds, Robert C.; Schuerer, Stephan C.; Snowden, Timothy S.; Umeano, Afoma C.; European Journal of Medicinal Chemistry; vol. 189; (2020);,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics