Category: Triazoles

Related Products of 423165-07-5, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 423165-07-5, name is exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane, molecular formula is C13H22N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

Compound (I) (3.09 g) as prepared in Example 5, compound (II) (2.34 g) as prepared in Example 4, and THF (30 g) were mixed in a round bottom flask. After the mixture was cooled in an ice bath and reacted for 10 min, HOAc (1.5 g) was added into the mixture and reacted for another 10 min. Subsequently, NaBH(OAc)2 (3.2 g) was added into the reaction mixture to reduce intermediate to crude product. The whole reaction mixture was quenched with 15% NaOH to pH >10. The organic phase was collected by phase separation, and concentrated under reduced pressure. Maraviroc (4.6 g) in a form of white powder was obtained from the concentrate by crystallization with EA.

By the way, if you are interested in learning more fun chemistry with your kids, get your hands into one chemistry set now, and start enjoying the best part of chemistry: experiments about exo-3-(3-Isopropyl-5-methyl-4H-1,2,4-triazol-4-yl)-8-azabicyclo[3.2.1]octane.

Reference:
Patent; SCI Pharmtech, Inc.; Wang, Heng-Yen; Kao, Chen-Yi; US2019/248782; (2019); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4922-98-9, New Advances in Chemical Research in 2021. The dynamic chemical diversity of the numerous elements, ions and molecules that constitute the basis of life provides wide challenges and opportunities for research. 4922-98-9, name is 5-Phenyl-1H-1,2,4-triazol-3-amine, molecular formula is C8H8N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

STEP E; A reaction mixture of compound 37-4 (28.4 mg, 0.1 mmol) and 3-phenyl-1 H- 1 ,2,4-tpiazol-5-amine (16 mg, 0.1 mmol) in ethanol was stirred at 80 0C for overnight. The product was purified using reverse phase HPLC. The two pure enantiomers (37-6 and 37-7) were chirally separated from 37-5 by chiral cell column (20 micron, 50 X 500 mm, 100percent MeOH with 0.1percent TFA as mobile phase at 80 mL/min).

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 5-Phenyl-1H-1,2,4-triazol-3-amine.

Reference:
Patent; SCHERING CORPORATION; SHIPPS, JR., Gerald, W.; CHENG, Cliff, C.; HUANG, Xiaohua; ACHAB, Abdelghani, Abe; ORTH, Peter; VOIGT, Johannes, H.; SOUCY, Kyle, Ann; WO2010/56631; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

New discoveries in chemical research and development in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. 288-36-8

A solution of 2-iodo-5-methylbenzoic acid (4.0 g, 15.3 mmol) in DMF (10 mL) was treated with 1,2,3-triazole (2.1 g, 30.5 mmol), CsCO3 (9.95 g, 30.5 mmol), CuI (0.145 g, 0.76 mmol) and trans-N,N’-dimethylcyclohexane-l,2-diamine (0.43 g, 3.05 mmol). The mixture was heated at 120 0C for 10 min in a microwave reactor. The reaction was cooled to room temperature, diluted with water, and washed with EtOAc. The aqueous phase was acidified with IN HCl and extracted with EtOAc. The organic layer was dried over Na2SO4, filtered and concentrated. The residue was purified by gradient elution on SiO2 (0 to 10% MeOH in DCM with 0.1% AcOH) to give the faster eluting 2-(2H-l,2,3-triazol~2-yl)-5-methylbenzoic acid, followed by the undesired regioisomer isomer, I -(2H- 1 ,2,3-triazoI-2-yl)-5-methylbenzoic acid. A solution of the acid (3.56 g, 17.52 mmol) in 150 mL of DCM was stirred and cooled to O0C. The solution was treated with oxalyl chloride (1.9 mL, 21.9 mmol) and DMF (68 muL, .878 mmol). The solution was slowly warmed to room temperature and stirred overnight. Solvent was concentrated and the resulting solid was azetroped with DCM and concentrated to provide A-7 as a yellow solid.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1H-1,2,3-Triazole ,and how the biochemistry of the body works.

Reference:
Patent; MERCK SHARP & DOHME CORP.; BRESLIN, Michael, J.; COLEMAN, Paul, J.; COX, Christopher, D.; SCHREIER, John, D.; WHITMAN, David, B.; WO2010/48010; (2010); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 27996-86-7, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 27996-86-7, name is 4-[1,2,4]Triazol-1-yl-benzaldehyde, molecular formula is C9H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

General procedure: A mixture of azolyl ketone (1a/1b) (1 mmol) and aryloxy benzaldehyde (2a-f) (1 mmol) were dissolved in 10% NaOH-EtOH (5 mL), it was stirred at room temperature for 9-10 h. After completion, 5 mL water was added to the reaction mixture. The separated solid compound was filtered and washed with water. It was purified by crystallization with methanol/chloroform or basic alumina column chromatography to give the desired compounds (3-13).The compounds (16-31) were prepared by the reaction of their corresponding aldehyde and ketone partners.

The result showed that such a combination of chemo- and biocatalysis improved the catalytic yield more than two times compared with that of sole metal catalysis.I hope my blog about 4-[1,2,4]Triazol-1-yl-benzaldehyde is helpful to your research.

Reference:
Article; Marrapu, Vijay K.; Chaturvedi, Vinita; Singh, Shubhra; Singh, Shyam; Sinha, Sudhir; Bhandari, Kalpana; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4302 – 4310;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Research speed reading in 2021. The prevalence of solvent effects in heterogeneous catalysis in condensed media has motivated developing quantitative kinetic. 1455-77-2, name is 3,5-Diamino-1,2,4-triazole belongs to triazoles compound, it is a common compound, a new synthetic route is introduced below. Safety of 3,5-Diamino-1,2,4-triazole

3-Amino-6-chloro-1,2,4,5-tetrazine (4) (1:00 g, 7.60mmol) was dissolved in a mixture of 16:0 mL acetonitrile and 2:0 mL water. To the stirred solution 3,5-diamino-1,2,4-triazole (1:51 g, 15:2 mmol) was added. The mixturewas heated to 90 °C and refluxed for 16 h. The precipitatewas filtered and washed with water and acetonitrile. Theproduct (9) was recrystallized from water. After standing overnight at ambient temperature, the crystals were filteredand dried. 1:33 g (5:78 mmol; 76percent) of red needles of 9 were yielded. ? Elemental analysis (C4H10N10O2, 230.19)exp. (calcd.) in percent: C 20.62 (20.87); H 4.18 (4.38); N 60.37(60.85). ? DSC (5 C min1, ° C): Tdec:: c 314 °C. ? 1H NMR([D6]DMSO, 25 °C, ppm): d =5.38 (s, 2H, NH2 triazole),6.94 (s, 2H, NH2 triazole), 7.83 (s, 2H, NH2 tetrazine).? 13C NMR ([D6]DMSO, 25 °C, ppm): d =155.5 (1C,C-NH2 triazole), 156.3 (1C, C-NH2 triazole), 162.7 (1C,C-tetrazine), 162.9 (1C, C-tetrazine). ? MS ((+)-DEI): m=z = 194.1 (100) [C4H6N10]+, 124.1 (43) [C3H4N6]+,99.1 (5) [C2H5N2]+, 82.1 (19) [C2H2N5]+. ? Raman: n(cm-1)=3250 (2), 3184 (5), 1648 (7), 1570 (5), 1555 (12), 1526 (5), 1477 (90), 1399 (4), 1371 (8), 1335 (6), 1158 (10),1027 (18), 866 (100), 828 (4), 669 (7), 580 (9), 456 (5), 356(4), 345 (7), 321 (6). ? Sensitivity data: IS: > 40 J; FS: >360 N; ESD: > 1 J.

In conclusion, we affirm that quantitative kinetic descriptions of catalytic behavior continue to serve as an indispensable tool to navigate research efforts intended to model. Read on for other articles about 1455-77-2.

Reference:
Article; Klapoetke, Thomas M.; Preimesser, Andreas; Stierstorfer, Joerg; Zeitschrift fur Naturforschung, B: Chemical Sciences; vol. 68; 12; (2013); p. 1310 – 1320;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 288-36-8, New Advances in Chemical Research in 2021. The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 288-36-8, name is 1H-1,2,3-Triazole, molecular formula is C2H3N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A suspension of NAOH (37.86 g, 946.5 mmol), sodium iodide (94.65 g, 631.5 mmol) and 1H- [1, 2, 3] triazole (61.03 g, 883.6 mmol) in 2-methyl-2-butanol (750 mL) was refluxed for 1 h under an inert atmosphere. After cooling to room temperature the methane sulfonate (94.18 g, 631.2 mmol) was added within 5 minutes. The resulting suspension was then heated to reflux for 3 h, cooled to room temperature and concentrated in vacuo at 45 C. Water (500 mL) and dichloro methane (1 L) were added and the organic phase was separated, dried over sodium sulfate and the volatiles removed at 30 C. The residue was distilled at 1 mmHg. A forerun was collected at 20-70 C. The main fraction distilled at 123-129C as a colourless, turbid liquid. After filtration over Celite 1- BUT-3-YNYL-IH- [1, 2,3] triazole was obtained as a colourless liquid (29.77 g, 38.9 %). ‘H-NMR (CDCL3) 8 : 2.05 (t, 1H), 2.75 (dt, 2H), 4.5 (t, 2H), 7.65 (s, 1H), 7.7 (s, 1H).

This is the end of this tutorial post, and I hope it has helped your research about 288-36-8!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/96796; (2004); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Reference of 23579-79-5, New discoveries in chemical research and development in 2021. We’ll be discussing some of the latest developments in chemical about CAS: 23579-79-5, name is 3,5-Dibromo-1-methyl-1H-1,2,4-triazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) 5-Bromo-2-methyl-2H-[ 1 ,2,4]triazole-3-carbaldehyde To a solution of 3,5-dibromo-l-methyl-lH-l,2,4-triazole (500 mg, 2.08 mmol, Eq: 1.00) in tetrahydrofuran (5 ml) was added dropwise at -45 C under argon atmosphere n-butyllithium 1.6 M in hexane (1.56 ml, 2.49 mmol, Eq: 1.2). The resulting mixture was stirred for 30 minutes at -45C and was then cooled to -70C. Then dimethyl formamide (197 mg, 209 mu, 2.7 mmol, Eq: 1.3) wass added dropwise. After 15 minutes the cooling bath was removed and the mixture was allowed to reach 25 C. The mixture was stirred for additional 2 hours at 25 C. The mixture was poured on water and extracted twice with ethyl acetate, the organic layers were combined, washed with water and brine, dried over magnesium sulfate, filtrated and evaporated, affording 5-bromo-2-methyl-2H-[l,2,4]triazole-3-carbaldehyde (218 mg / 55.3 %) as an orange semi solid. MS: m/e= 189 (M+H+)

In the meantime we’ve collected together some recent articles in this area about 3,5-Dibromo-1-methyl-1H-1,2,4-triazole to whet your appetite. Happy reading!

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; FLOHR, Alexander; GROEBKE ZBINDEN, Katrin; KUHN, Bernd; LERNER, Christian; RUDOLPH, Markus; SCHAFFHAUSER, Herve; WO2013/178572; (2013); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 41253-21-8, New Advances in Chemical Research in 2021.In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. 41253-21-8, name is Sodium 1,2,4-triazol-1-ide, molecular formula is C2H2N3Na, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

(2) Prepare a thermometer, a condenser,Add 250 ml of DMF and 1,2,4-triazole sodium salt (18.5 g 203 mmol) to a 250 ml four-neck reaction flask of a stirrer.Add 1-chloro-2-(4-chlorophenyl)-3-cyclopropylbutan-2-ol (44 g, 170 mmol),Heat to 100 C, reaction 60 ~ 100min, sample analysis,When the content of 1-chloro-2-(4-chlorophenyl)-3-cyclopropylbutan-2-ol is less than 1%,It is considered as the end of the reaction. Cool to room temperature,The reaction droplets were added to 120 ml of cold water.The precipitated solid was stirred, filtered, washed with water, dried.A cyproconazole having a content of 96% was obtained in a weight yield of 90%.

The potential utility of systematic synthetic strategy will be applicable to efficient generations of chemical libraries of compounds to find ‘hit’ molecules.Read on for other articles about Sodium 1,2,4-triazol-1-ide, hurry up and to see.

Reference:
Patent; Huai’an Guorui Chemical Co., Ltd.; Zhang Pu; Li Ming; Jin Yucun; Chen Chao; Zhong Yu; Chen Mingguang; Wang Fengyun; (8 pag.)CN109400542; (2019); A;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Application of 7411-23-6, New Advances in Chemical Research in 2021.Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, 7411-23-6, name is 3,5-Dibromo-1H-1,2,4-triazole, molecular formula is C2HBr2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

P-methoxybenzyl chloride (759.55 mg) was added to an acetonitrile mixture (10 ml) of a compound WX080-1(1.1 g), N,N-diisopropyl ethylamine (1.25 g) and potassium iodide (402.55 mg). The resulting mixture was reacted at 80C for 2 hours. The reaction solution was spin-dried, and the resulting product was diluted with 100 ml of ethyl acetateand washed with water (20 ml 3 2). The organic phase was dried with anhydrous sodium sulfate, filtered and spin-driedto obtain the compound WX080-2. ESI m/z: [M-H]+= 348.1.

Therefore, this conceptually novel strategy might open impressive avenues to establish green and sustainable chemistry platforms.In my other articles, you can also check out more blogs about 3,5-Dibromo-1H-1,2,4-triazole.

Reference:
Patent; Shandong Danhong Pharmaceutical Co., Ltd.; LUO, Zhi; LI, Xiaolin; YANG, Yaxun; YANG, Lele; LI, Peng; HE, Haiying; LI, Jian; CHEN, Shuhui; (155 pag.)EP3626699; (2020); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics

Electric Literature of 4928-88-5, New Advances in Chemical Research in 2021. The appropriate choice of redox mediator can avoid electrode passivation and overpotential, which strongly inhibit the efficient activation of substrates in electrolysis. 4928-88-5, name is Methyl 1H-1,2,4-triazole-3-carboxylate, molecular formula is C4H5N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, below Introduce a new synthetic route.

A solution of [LH-[1,] 2,4] triazole-3-carboxylic acid methyl ester (3.0 g, 0.23 mol) in [N, N-DIMETHYLFORMAMIDE] (76 mL) at [25 oC] was treated with triphenylmethylchloride (7.2 g, 0.23 mol) and triethylamine (6.41 mL, 0.23 mol). The reaction mixture was stirred at [25 oC] for 4 days and then diluted with ethyl acetate. The mixture was then washed with a dilute aqueous hydrochloric acid solution. At this time, methanol was added to the organic layer. A precipitate formed and was removed by filtration. The organics were further washed with a saturated aqueous sodium chloride solution, dried over magnesium sulfate, filtered, and concentrated in vacuo. The resulting solid was triturated with diethyl ether. The solid was collected by filtration and washed again with diethyl ether to afford 1-trityl-1H-[1, 2,4] triazole-3-carboxylic acid methyl ester as a white solid (2.45 g, 84percent) which was used without further purification.A solution of 2, 2-dimethyl-propionic acid 8- (4-acetylamino-benzyl)-3-butyl-2, 6- dioxo-1, 2,3, 6-tetrahydro-purin-7-ylmethyl ester (104 mg, 0.22 mmol) in acetonitrile (2.0 mL) was treated with [1,] 8-diazabicyclo [5.4. 0] [UNDEC-7-ENE] (0.03 mL, 0.24 mmol) and [2-BROMOMETHYL-1-FLUORO-4-NITRO-BENZENE] (56.6 mg, 0.24 mmol). The resulting solution was heated to [50 oC FOR] 6 h. At this time, another portion of 1,8- diazabicyclo [5. [4 : 0] UNDEC-7-ENE] (0.03 mL, 0.24 mmol) was added. The reaction was stirred at [25 oC] for 18 h. At this time, the reaction was poured into ethyl acetate (200 mL) and was washed with a 1N aqueous hydrochloric acid solution [(1] x 50 mL) and a saturated aqueous sodium chloride solution [(1] x 50 mL). The organics were dried over magnesium sulfate, filtered, and concentrated in vacuo. Flash chromatography (Merck Silica gel 60,230-400 mesh, 1: 1 ethyl acetate/petroleum ether) afforded 2,2- dimethyl-propionic acid 8- (4-acetylamino-benzyl)-3-butyl-1- (2-fluoro-5-nitro-benzyl)- 2, [6-DIOXO-1,] 2,3, 6-tetrahydro-purin-7-ylmethyl ester (45.3 mg, 33percent) as a tan solid

I am very proud of our efforts over the past few months and hope to Methyl 1H-1,2,4-triazole-3-carboxylate help many people in the next few years.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; WO2003/106459; (2003); A1;,
1,2,3-Triazole – Wikipedia,
Triazoles – an overview | ScienceDirect Topics